Crackin' job. I like the clamped guide for jigsaw cuts on the plywood AND the angle brace. Never seen either before & I often profess I've seen everything. Lookin' great.
This is the second DIY van build that didn't involve sponsors for every part of it. The other is Foresty Forest. Sponsored builds take forever because they have to get the item in every shot or give detailed instructions. You two are just showings us materials, telling us what you're doing and just doing it. Doesn't seem as daunting when you're not bombarded with technical terms and name brands. I know I appreciate this series a lot!
I’m looking forward to seeing the end result and your adventures. Probably with Paul outside in his favourite tent of the week and Mrs Messner comfortably wrapped up inside with a brew!
10:25 I really appreciated the chaf. It was good fun and a bit of a look behind the scenes. (And I learned a new word for my second language. Always love this!) Breaking the work down to small packages, which can be done in a reasonable time, is one of the most important things in a project. I often thought, well that will be in in an hour, and it took 4 hours. Like a reverse Scotty moment.
Great videos Paul. Little tip in case you have any more Plywood to cut. When you have measured the lines for your plywood cuts, run a Stanley knife down the line to score it. This will help cut the top layer uniformly and will help with less burred edges when using a jigsaw/circular saw. This will then lessen the amount of sanding on the edges required :)
Life would be so much easier with a work bench, but you're doing a great job without one, so what do I know! Those corner clamps look brilliant. And as you're both vertically challenged you can always retreat inside the van! ;-) Cheers.
Seeing how Mrs Messner gives you a bit of a verbal jab now and then, such fun. The chaff keeps it real. The van is starting to look amazing, can't wait for the next video.
Good to see people giving tips rather than telling you how you should have done it. Not interested in converting a van myself but looking forward to the final product and the adventures where it may take you. 👍👍
Sorry Paul but I'm with Jo on the Chaff front. Van is coming along nicely, won't be long until you will be out on your first overnighter at this rate. Thanks for posting.
Enjoying the videos. I use the screwdriver bit in my drill to make a basic countersink for the screws which helps to prevent splitting of the timber. Put the bit in the hole and move round in a large circle.
Not considered a loo and shower Paul? Really doesn't need to take up loads of room, gives you the full package and means you can - where permitted - get a bit closer to nature than a commercial camping site. 👍
Uz are doing a great job! Well done! I am pleased u got a expert in for the the windows as that was my concern! Keep up the great work ur doing. Mark Shaw.
Ye keep it all in warts an all lol it’s looking great now your both doing such a swell job it’s as if you’ve done a million vans before 🙏 till the next one 👊🚚👊
Brilliant series that i am really enjoying, the trouble is i wan't to see some more and iv'e even watched some twice : ) Looking forward to the next installment and i bet Wickes are too ; )
Your van looks great but it's all more work than I would ever want to do. I have a no-build build in my minivan and "debuilt" it the other day in 20 minutes to return it to an empty back van. It works great for me.
I’m loving this series so far. Thank you for showing the little mistakes and the bits you need to redo instead of pretending like everything is easy and perfect on the first attempt. And I think it’s great that you’re doing it with what you’ve got instead of a whole workshop and thousands of dollars of tools... it makes it seem so much more realistic and possible for someone like me. Cheers from California!
I'll be honest Paul, I have no plans to do a camper van conversion. But I have found this little series you've done most enjoyable to watch. Look forward to seeing more of the completed camper van on tour!
Really enjoying this series of vids. It appeals as I feel like I’m treat like an equal, not a diy genius. Therefore I’m encouraged to have a go , cheers to both of you.
Quick one Paul-I am a joiner by trade, so a quick tip-when using a handsaw if you look at the grip, it has an ambidextrous recess for your index finger to point, as the rest of your fingers grab the handle! It allows far much control over the usage of the saw bud-you can thank me later when you try😃 Keep up the good work👍🏼
Also Paul, although the framework may seem solid and sound now bud, it really would benefit from gluing at every joint with some PVA glue bud-using screws alone may feel sturdy initially Paul, within six months, the whole structure will collapse bud causing a major headache. PVA will allow the structure to have more strength at the joint, than the actual timber you are joining bud👍🏼👍🏼👍🏼
@@PaulMessner You are welcome Paul, screws alone will provide a good mechanical fix, but for longevity PVA glue will make the structure as robust as metal bud-it’s easily sorted Paul but I insist you do it!!! Take care👍🏼👍🏼👍🏼
The tongue and groove work you are undertaking will be fine, but anything that is load bearing or may be taking any form of stress, then PVA is your friend Paul, the bond has more strength than the timber itself! Good luck, you are doing a great job👍🏼👍🏼
What a great job, for a couple of people who haven’t done anything like this before, your doing marvellous, mate. You both will really enjoy the diesel heater when out and about.
Watch our campervan build from the beginning here ruclips.net/p/PLbU28ZzUOa48kcq9zxaVz3_ut22lRwn0f
Crackin' job. I like the clamped guide for jigsaw cuts on the plywood AND the angle brace. Never seen either before & I often profess I've seen everything. Lookin' great.
I agree with Jo and appreciate the chaff!
This!
I can confirm that the chaff is definitely appreciated!
Keep the Chaff in Paul!
I like the chaff too.
This is the second DIY van build that didn't involve sponsors for every part of it. The other is Foresty Forest. Sponsored builds take forever because they have to get the item in every shot or give detailed instructions. You two are just showings us materials, telling us what you're doing and just doing it. Doesn't seem as daunting when you're not bombarded with technical terms and name brands. I know I appreciate this series a lot!
Joe's right don't cut the chaff
Your doing brill
a nice bit of chaff at the end. and liked too. thanks for sharing your project. I am having a good time watching things develop.
Yeah, the chaff is funny, keep it in. 👍🤣
Love the chaff, guys!!
Shes not wrong Paul we love the chaff.
These are great to watch and the chat is good
Yeah, keep the banter 👍 nice series 👏
Great build , good effort .....keep the chaff !!!
Paul your content is getting much better every episode (It was good anyway) 10/10
I’m really enjoying this series! Can’t wait to see the finished project. 🚙 🚙 🚙
PS I like the chaff!
I have to say your wife is right - a wee bit of chaff to accompany the otherwise slick production gives it a very watchable quality!
I’m looking forward to seeing the end result and your adventures. Probably with Paul outside in his favourite tent of the week and Mrs Messner comfortably wrapped up inside with a brew!
Excellent stuff guys, coming along nicely and I’m here definitely for the chaff......🚐🙌🏻😂
10:25 I really appreciated the chaf. It was good fun and a bit of a look behind the scenes. (And I learned a new word for my second language. Always love this!) Breaking the work down to small packages, which can be done in a reasonable time, is one of the most important things in a project. I often thought, well that will be in in an hour, and it took 4 hours. Like a reverse Scotty moment.
Really enjoying these vlogs keep them coming
Looking good Paul. Van too!
Great videos Paul. Little tip in case you have any more Plywood to cut. When you have measured the lines for your plywood cuts, run a Stanley knife down the line to score it. This will help cut the top layer uniformly and will help with less burred edges when using a jigsaw/circular saw. This will then lessen the amount of sanding on the edges required :)
I Agree with Jo, love hearing the chatter. Great build and maybe a project I might have the confidence to undertake after watching your conversion.
Jo’s always got a brew on ☕️
You're certainly cracking on with the van. Love the chaff, more chaff please. 😊
I love the way Jo quietly and tactfully keeps you grounded. I have a Jo too.... Your van conversion looks amazing!
Life would be so much easier with a work bench, but you're doing a great job without one, so what do I know! Those corner clamps look brilliant. And as you're both vertically challenged you can always retreat inside the van! ;-) Cheers.
its going to be lovley mate . well done fella 👍
Seeing how Mrs Messner gives you a bit of a verbal jab now and then, such fun. The chaff keeps it real. The van is starting to look amazing, can't wait for the next video.
Good to see people giving tips rather than telling you how you should have done it. Not interested in converting a van myself but looking forward to the final product and the adventures where it may take you. 👍👍
You guys are a hoot! Love watching the progress.
Great vid! Love the chaff lol
G.I. Joe with the Kung Fu grip = Trading Places. good job on the seating/storage frames.
I already wanted to do this, now I know I can. Even the electrics!
It's looking awesome buddy.
Well done guys you're doing an awesome job, esp with basic tools. I love the way you just crack on and do it.
Coming on great paul and jo very happy for you cant wait to start my van build learnt a lot from you thanks guys
I've been in absolute awe watching this. Congratulations. Seriously impressive work.
Sorry Paul but I'm with Jo on the Chaff front. Van is coming along nicely, won't be long until you will be out on your first overnighter at this rate. Thanks for posting.
The chaff keeps it real it was just the same when we built our van grt fun
Another informative and intuitive video, keep them coming Paul. By the way, the chaff/banter works brilliantly, keep it in!!
Enjoying the videos. I use the screwdriver bit in my drill to make a basic countersink for the screws which helps to prevent splitting of the timber. Put the bit in the hole and move round in a large circle.
I must admit l am rivitted 😜 to this van conversion. Can't wait for the next installment.
It is really looking great.
Come on get on with it.......lol. I can't wait to see the finished van. Brilliant effort both of you.
longer vids please :) i could watch all day lol
Not considered a loo and shower Paul? Really doesn't need to take up loads of room, gives you the full package and means you can - where permitted - get a bit closer to nature than a commercial camping site. 👍
I really like seeing one's partner partake in projects like this, often times us guys will do everything ourselves but teamwork builds stronger bonds.
Joe is always correct , easier to go with the flow 😉👍
Leave the chaff in Paul lol your making this look really easy btw 👍
Thanks for another great video Mr and Mrs DIY.
I am enjoying this greatly. This is going to add a whole new chapter 2 your adventures
Good to see the van coming along mate. Chaff away !!
Enjoying this build series. Entertaining and informative. Thanks for uploading all your vlogs.
Uz are doing a great job! Well done! I am pleased u got a expert in for the the windows as that was my concern! Keep up the great work ur doing. Mark Shaw.
Ye keep it all in warts an all lol it’s looking great now your both doing such a swell job it’s as if you’ve done a million vans before 🙏 till the next one 👊🚚👊
Great job, may be worth adding PVA glue when jointing strengthen the joints and cut down creaking later,
Very Impressive Paul really taking shape 👌
Brilliant series that i am really enjoying, the trouble is i wan't to see some more and iv'e even watched some twice : )
Looking forward to the next installment and i bet Wickes are too ; )
Looking so good now Paul. Really enjoying this series
Just a tip,learn to extend your index finger on your cutting hand while sawing it helps to control the saw better👈👉
Making a really pro job of that hilleberg van Paul top notch 👍🏻
Real enjoying this series. I have been thinking about doing a van for about 2 years but never got started. You have me inspired.
Love your content Paul! Been watching for a year and a half now!
Thanks for sharing your tool gadgets. That right angle clamp looks perfect.
Van is coming on great 👍🏻
The chaff and the laugh makes us happy. Thank you 😃
Looks great. Truth be told we tune for Jo and her wisdom and the chaff.
God isnt that chap lucky to have jo about him, shes so hilarious man!
Your van looks great but it's all more work than I would ever want to do. I have a no-build build in my minivan and "debuilt" it the other day in 20 minutes to return it to an empty back van.
It works great for me.
Really enjoying this series. Well done, guys!!
I think I appreciate the "chaff"!!
I’m loving this series so far. Thank you for showing the little mistakes and the bits you need to redo instead of pretending like everything is easy and perfect on the first attempt. And I think it’s great that you’re doing it with what you’ve got instead of a whole workshop and thousands of dollars of tools... it makes it seem so much more realistic and possible for someone like me. Cheers from California!
quality chaff!. Hope you get a wild camp in this week Paul
Loving the chaff
Didn't expect to like this van series, as a non driver.. but I've enjoyed it a lot as I do like DIY stuff. Wish they were a little longer mind.
Great video but the boss is correct, keep the chaff in. Keep going and keep safe mate 👍
I'll be honest Paul, I have no plans to do a camper van conversion. But I have found this little series you've done most enjoyable to watch. Look forward to seeing more of the completed camper van on tour!
Really enjoying this series of vids. It appeals as I feel like I’m treat like an equal, not a diy genius. Therefore I’m encouraged to have a go , cheers to both of you.
Hats off Paul and cuppa Jo. Doing a fantastic job.. Great Times and fun for you both on your travels...
Quick one Paul-I am a joiner by trade, so a quick tip-when using a handsaw if you look at the grip, it has an ambidextrous recess for your index finger to point, as the rest of your fingers grab the handle! It allows far much control over the usage of the saw bud-you can thank me later when you try😃 Keep up the good work👍🏼
Also Paul, although the framework may seem solid and sound now bud, it really would benefit from gluing at every joint with some PVA glue bud-using screws alone may feel sturdy initially Paul, within six months, the whole structure will collapse bud causing a major headache. PVA will allow the structure to have more strength at the joint, than the actual timber you are joining bud👍🏼👍🏼👍🏼
I think before I panel everything I’ll loosen the joints and Bob some wood glue in. Thanks for this.
@@PaulMessner You are welcome Paul, screws alone will provide a good mechanical fix, but for longevity PVA glue will make the structure as robust as metal bud-it’s easily sorted Paul but I insist you do it!!! Take care👍🏼👍🏼👍🏼
The tongue and groove work you are undertaking will be fine, but anything that is load bearing or may be taking any form of stress, then PVA is your friend Paul, the bond has more strength than the timber itself! Good luck, you are doing a great job👍🏼👍🏼
it’s coming together so nicelyyy, at the end please compare it with that little model Jo made
Loving the chaff - looking forward to seeing the desiel heater - can't make my mind up about that given the hole you need to put in the floor.
What a great job, for a couple of people who haven’t done anything like this before, your doing marvellous, mate. You both will really enjoy the diesel heater when out and about.
You must be well proud Paul. Great stuff.
All of the chaff :) Also, I'm in Sheffield - if you need to borrow a circular saw let me know
Love the van video series. 👍
Full of useful hints....Thanks Paul and team!!
i don't know why, but i am enjoying watching the van being made
You two are having fun with it and thats the most important thing. Coming along nicely too.
Mate i love watching this van conversion love watches enjoyment on your face at every stage of this conversion
A true Pro at work, great series of videos mate
Coming along nicely Paul and Jo cant wait to see it finished 👍💪💪🏴
Coming along very nicely - fridge and hob in and happy days, won’t even have to leave the van to get a cuppa 🤣
Great video Paul, you explain everything really well. It’s good to see your wife getting involved. Your a good team .
Making it look so easy
More great progress guys 👍👍
You are not going to win wit Jo... love the van build
Great wee bit o chat
Well done both. really enjoying this come together. Thanks and stay safe.
We like the chaff