How to Convert a Bicycle into Electric Bike (Goes over 60km/h with 20 km Range)

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 287

  • @gauravjoshi9183
    @gauravjoshi9183 3 года назад +3

    Why is no one talking about this guy? Crazy stuff

  • @abdulrafay6853
    @abdulrafay6853 4 года назад +22

    Believe me or not the only Pakistani guy I got who is doing a job which our country needs. Our Colin furze ♥

    • @DIYKingSaM
      @DIYKingSaM  4 года назад +3

      Thanks for your support.

    • @YehZindage
      @YehZindage 4 года назад +2

      i really wish more can join or support him.

    • @talhaiqb
      @talhaiqb 2 года назад

      @@DIYKingSaM you are the light at the end of the tunnel... keep up the good work

  • @uddhavambavane8853
    @uddhavambavane8853 4 года назад +24

    where is the scrap yard that you find the speed controller

    • @nanku6661
      @nanku6661 4 года назад +1

      સાયકલ નોબડે
      એક ઈલેક્ટ્રીક સાઇકલ ના નંબર કંપનીના નંબર આપજો માહિતી કંપનીના નંબર

    • @monkeh3612
      @monkeh3612 3 года назад

      It's not a shop that has a bunch of them. It's a scrap yard

    • @guiseppif1
      @guiseppif1 2 года назад

      U

  • @GamerX-xw8vg
    @GamerX-xw8vg 4 года назад +1

    This type of Channel need our youth

    • @YehZindage
      @YehZindage 4 года назад

      hahaha, "TABDEELI AA JAAY GEE INSHA-ALLAH" thoora time lagay gaa

  • @Nifty-Stuff
    @Nifty-Stuff 4 года назад +9

    I can't believe it took me so long to stumble on this channel. Your videos are so well done! I'm subscribed!!!
    One request: In your video, you mentioned the scrap yard: I'd love to see a video of you going to / through the items at your local scrapyard!!!

  • @HowToGuys
    @HowToGuys 4 года назад +2

    Amazing 👍,but make sure to connect balancer to lithium batteries to ensure safety.

    • @DIYKingSaM
      @DIYKingSaM  4 года назад +1

      Yes, we have connected the 10s BMS to each battery pack.

  • @coryjeffreys5146
    @coryjeffreys5146 4 года назад +5

    I’m just amazed at what you two can do with those Hoover board motors. You guys are amazing.

  • @ganeshmahajan1985
    @ganeshmahajan1985 2 года назад +2

    How is the bike doing? Is over volt killed the motor already?? Please reply, as I understand this is the most obvious question everybody here are eager to know.
    Good work guy, hope to get the answer from you soon.

  • @ashrafsalie89
    @ashrafsalie89 3 года назад +1

    Excellent...next generation in electric vehicles...your ideas is things which I thought about but manage to do... Two thumbs guys.
    Keep it simple so that everyone can afford... Not just the billionaires

    • @gregschroer2314
      @gregschroer2314 2 года назад

      The bayonets aint worried about something like this yes they'll still be flying around in their petroleum a petroleum fuel jet and limos

  • @TheJunkyardgenius
    @TheJunkyardgenius 4 года назад +4

    Your bike looks fantastic. Those 3d printed parts make it look great and sorting the wires out was a great improvement. I have seen a few bikes that can go really fast and i really like them. I'd love to see one that goes fast enough but can go a huge range. Maybe have a small bike trailer for more battery storage. Keep up the good videos, they are very helpfull.

  • @hugokillian-dawson591
    @hugokillian-dawson591 4 года назад

    I can't believe I only just found your Chanel. It's literally perfect for me. It's the Chanel I've been looking for, for years. So glad I finally found it

  • @eduardonoguchi8140
    @eduardonoguchi8140 2 года назад +1

    Hi greetings! the ebike was amazing! if it is not too much trouble, I would like to know where I can buy a pinion similar to the one you used in the ebike project?

  • @DjTips
    @DjTips 2 года назад

    Great Job there but with this bike does it have problem with breaks because I think the brakes cant handle the speed of a normal bike

  • @green_life7
    @green_life7 2 года назад +1

    Dear brother, which 3D printer and which printing material and which printing software did you use?

  • @trovaoag
    @trovaoag 4 года назад +2

    Hi my friend, I am from Brasil. Do you can show how change settings of the motor?

  • @tomaswolsink7620
    @tomaswolsink7620 4 года назад +1

    Super innovative bike looks amazing well build and very fast good work guys I always enjoy watching you're video's keep them coming greatings from the Netherlands :)

  • @АннаВолкова-ъ4э
    @АннаВолкова-ъ4э Год назад

    Wonderful, low-cost bike. LUDICROUS SPEED!!

  • @mixelledo2704
    @mixelledo2704 4 года назад +6

    great job you guys are the best, thanks to you i'm inspired, love you guys keep it up!!!

    • @DIYKingSaM
      @DIYKingSaM  4 года назад +1

      Thanks for kind words.

    • @33R3X
      @33R3X 4 года назад

      @@DIYKingSaM Bro where do you live 🤗

  • @gauravjoshi9183
    @gauravjoshi9183 3 года назад

    Dude you are crazy.. Love from 🇮🇳

  • @vishalsingh-fq2xi
    @vishalsingh-fq2xi 4 года назад +1

    What is the rated power of the hub motor??
    And how did u modify the hub motor in order to supply it 80 volts??

  • @vijaydas3245
    @vijaydas3245 3 года назад +1

    Such neat work.. Awesome pure pleasure to see your creations

  • @electricvehicles1772
    @electricvehicles1772 4 года назад +2

    Can you please send the link and code for the hoverboard motor pcb

  • @glocklock2828
    @glocklock2828 3 года назад +1

    wow u guys are genius..clean and perfect everything..well designed with finishing.. lovely ♥️♥️♥️♥️✌️👍

  • @francoisonbass-vertigo1763
    @francoisonbass-vertigo1763 2 года назад

    Can you try to put pedals for use like a normal bicycle too ?

  • @orlandocorley4024
    @orlandocorley4024 10 месяцев назад

    I'm very surprised that the hoverboard motor makes that much torque and speed. What brand, model hoverboard did it come off of? And what size sprocket was used on the rear wheel? Well whatever was used, it looks like it was perfect for allowing plenty of speed and plenty of torque also. But please reply if you can answer my questions. Thanks!!

  • @tobyn6050
    @tobyn6050 4 года назад +1

    Did u say ur running the motor at 84v?

  • @killerkip1
    @killerkip1 6 месяцев назад

    How do you avoid overspeeding and overvolting the motor and controller?

  • @salmanjutt3671
    @salmanjutt3671 4 года назад +1

    Bhai Level pe ho Ap 🤗👍👍👍❤️❤️❤️

  • @mohammadfaakhir1908
    @mohammadfaakhir1908 3 года назад

    Hey plz tell how much voltage and wattage the motor is and how is your bike is going so fast while hoverboard motor are only 36v and 350w and approx 600 rpm
    Plz answer i want to make a similar bime plz

  • @michaelchinwendu5451
    @michaelchinwendu5451 2 года назад

    I love your channel very well
    Am Michael from Nigeria
    Pls how can I get the customize pannel u use inside the hoverboard motor during modification

  • @amjadislam1579
    @amjadislam1579 4 года назад

    Hello all the way from England... mashallah I’m amazed the quality level of this video.. an ur 3D printer rocks maaan ... this gives me ideas for me own DIY ebike project

  • @chakramaharjan8462
    @chakramaharjan8462 4 года назад +1

    Very fine finishing workmanship !! I like it ! 👌🇳🇵 Are you from pakistan ?

  • @sadiqabubakar7164
    @sadiqabubakar7164 4 года назад +1

    Mashallah Weldon Weldon this is a great project indeed a great achievement
    Please I have a question the maximum volt for the motor is 45v if u use a 80v speed controller is that what makes it run fast ?

    • @romandise
      @romandise 3 года назад

      +voltage +speed
      +Amper +aceleration

  • @FENCEDOCTOR-nd7jm
    @FENCEDOCTOR-nd7jm Год назад

    Can u put another alternator on other side and very small 12 volt battery and have never charge bike

  • @electronic7979
    @electronic7979 4 года назад +4

    Excellent project

  • @cscheatum
    @cscheatum 2 года назад

    What happened to the unlimited energy magnet motor?

  • @sandroforms
    @sandroforms 3 года назад

    already thought about using the gear again and test how your ebike will be with the option to change gears?

  • @fatbikinginpakistan3144
    @fatbikinginpakistan3144 4 года назад +1

    Bhi hoverboard motor ki speed increase krni ha ak video bna do with full details 2000 rpm chahiye with power at 36v 350w controller

  • @user-mz7hb1dq5x
    @user-mz7hb1dq5x Год назад

    Nice Bike. You speak English well I like. You have a beautiful accent. I Like your thoughts on the higher voltage require less amps.

  • @spelyt4284
    @spelyt4284 3 года назад

    What is the size of Hoverboard Motor 6inch or 8inch and wattage 250w or 350w??? Please reply sir

  • @praneelpanchigar4172
    @praneelpanchigar4172 4 года назад +3

    You guys are doing a great job making DIY projects. Countries like India and Pakistan need to inspire the next gen to be great engineers. Also the video quality is just amazing, I would really appreciate if you can link some basic blueprints in the comments so others can try these projects out. Love from India👍👍

  • @Divyesh_Sinha
    @Divyesh_Sinha 3 года назад +2

    How is the motor isn't burning?
    It was rated for 36v and you are using 84v

    • @UsmanGhani-c3j
      @UsmanGhani-c3j 3 месяца назад

      Bro the motor is only getting the amount that is in the battery 84v is limit of the motor controller not cureent volt so if he uses a 48v battery in a 84v motor controller the motor controller will only use the amount in the battery so the controller is getting only 48v

  • @stephencraig7376
    @stephencraig7376 4 года назад

    Please may i know if there's a overheating in hoverboard motor? Cuz i know its only 36v 350w?
    And u run it at 3kw controller?
    Please answer thanks!

  • @bdarylk
    @bdarylk 2 года назад

    Would love to see what would happen if u put alternator also on front tire

  • @Bondadz
    @Bondadz 4 года назад

    The hooverboard motor only 36V, with 15km/h runs. Did you rewinding the motor to get higher voltage?

  • @brahimbensaid1732
    @brahimbensaid1732 4 года назад

    Can you give us a video about how to make the controlor 350w hovrboord

  • @rugerist
    @rugerist Год назад

    hello, what is the length and drill hole of your spacer

  • @javierchaparro4769
    @javierchaparro4769 4 года назад

    Amazing controller modification

    • @DIYKingSaM
      @DIYKingSaM  4 года назад +1

      Thanks for appreciation.

  • @josipkupresak9659
    @josipkupresak9659 4 года назад

    Is it 350w hoverboard motor?

  • @scottrocks1993
    @scottrocks1993 3 года назад

    I'm not sure why you didn't make a mid drive system with the hoverboard motor. I made one with a hoverboard motor it's very simple.
    And you have the option to ride.
    Like a normal pedal bike without the power.
    With no resistance

    • @miroslavganev1072
      @miroslavganev1072 3 года назад

      Can you provide any pictures please, interested?

  • @patilssandeep
    @patilssandeep 3 года назад +1

    Great to see that all this is possible to do on our own now. Have you thought about selling this as a pre assembled kit. Pretty sure lot of people will be waiting for a product like this in the market

    • @jerryk.8636
      @jerryk.8636 2 года назад

      How about a"FREEWAY -"CRUISER"..(MAYBE.. (?)-60 mi-per-hour . . would be sufficient to "keep pace with the "slower.. (?)-"traffic . .? ("what do you think . .?

  • @DIYTAYSEERworld
    @DIYTAYSEERworld 4 года назад

    Nice project.. I unsub all others and subscribe yours.. Keep building..love from sharjah to Karachi..

  • @muhammadhasnat8912
    @muhammadhasnat8912 4 года назад +1

    Why did you change the enclosure. It works as a heat sink.

    • @DIYKingSaM
      @DIYKingSaM  4 года назад

      Yes you are right, but we have design the new enclouser having small heat sink which is enough to cool and it work pretty good.

  • @israelkingsley8290
    @israelkingsley8290 2 года назад

    Thumbs up man , good n impressive work...

  • @killroy8365
    @killroy8365 4 года назад +1

    Awsome work, hope you could shoot more footage of testing like uphill off road etc.

  • @sadiqabubakar7164
    @sadiqabubakar7164 4 года назад

    Very good job
    What is to be considered in making the bike fast is it the battery or controller?

  • @vjnvgjvgjuhg6146
    @vjnvgjvgjuhg6146 4 года назад

    Could you make it faster by rewinding the stator?

  • @rdcreative555
    @rdcreative555 4 года назад

    Which camera do you use. Plzzz reply sir

  • @diywithpapo4576
    @diywithpapo4576 4 года назад

    At 7:15 you mentioned in series voltage is 84 volts. The battery says 36 × 2 = 72 volts how much voltage can a hoverboard motor take can you give more details

    • @SlippySkip
      @SlippySkip 4 года назад

      51 volts XD that motor wont last long

    • @FIprobe
      @FIprobe 4 года назад

      @@SlippySkip hoverboard motors can take 120volts for over a half an hour.

    • @SlippySkip
      @SlippySkip 4 года назад

      Fiprobe holy cow I have a 130 watt motor Rated at around 48v

  • @andr3sp75
    @andr3sp75 Год назад

    What is that cylinder in the bottom bracket?

  • @floweuphoria69420
    @floweuphoria69420 Год назад

    I need to make an E bike so that I can work and do a whole bunch of legal shit so I can see my son you have no idea how helpful this is

  • @AhmedGul1
    @AhmedGul1 4 года назад

    Well done guys. You are doing fantastic work

  • @rugerist
    @rugerist Год назад

    HI, how much is your battery. 48v? Thanks

  • @NabeelKhan-sz3be
    @NabeelKhan-sz3be 4 года назад +1

    Love you working space 😍

  • @medshadow1
    @medshadow1 4 года назад

    No heat on the hub motor ???

  • @lullimuppi
    @lullimuppi 2 года назад

    Wow!❤️ Regards from 🇩🇪

  • @deeganparker6460
    @deeganparker6460 4 года назад

    Very high quality filmmaking I'm impressed

  • @ramkonakanchi6799
    @ramkonakanchi6799 4 года назад

    Ur channel name is apt keep rocking

  • @Kiddostv012
    @Kiddostv012 3 года назад

    And where did you got that scrap battery please help me with that

  • @abdulazizmusa4816
    @abdulazizmusa4816 4 года назад +1

    You truly deserve to be king🤴💪💪💪💪

  • @Boogaz
    @Boogaz 8 месяцев назад

    What type of shaft adapter are you using with that motor? I need that exact part

  • @aliasgher7571
    @aliasgher7571 4 года назад +4

    Love from quetta 🥰❤️

  • @squayssan5352
    @squayssan5352 Год назад

    hi, you're bike go with 72 v ? because you connect in serie 36+ 36= 72v

  • @audiepineda2878
    @audiepineda2878 4 года назад

    Can you convert this to a more usable pedal assist e bike?

  • @alexeialekseev
    @alexeialekseev 3 года назад

    Nice work! What size of wheels is here?

  • @chamanlaltokis4767
    @chamanlaltokis4767 3 года назад

    Bhai mere pas hovarboard motor hai usko cycle pe lagana hai.mere pass huge 26 mauntan cycle hai.please help me.

  • @muhammadhasnat8912
    @muhammadhasnat8912 4 года назад

    What's the gear ratio and please do share link of sprocket set.

  • @RazaKhan-yu1re
    @RazaKhan-yu1re 2 года назад

    Hi bro
    I have universal bldc controller chinese made its new
    There is no labels can you help for wiring diagram

  • @mustafacan3.4
    @mustafacan3.4 4 года назад

    hi sir, i have 2 hoverboard motors but no bike card, so if i connect the 42v hoverboard battery to 2 hoverboard motor and put 1 key, will it work

  • @UbaidUbaid-dc9db
    @UbaidUbaid-dc9db 4 года назад +3

    Mashallah mashallah bahut hi accha

  • @Tommylooooo
    @Tommylooooo 4 года назад

    what pinion did you use

  • @Kang_dekal_bandung
    @Kang_dekal_bandung 2 года назад

    Great job dude 👍👍👍

  • @matatisan
    @matatisan 4 года назад +3

    the motor isnt getting hot?

    • @javierchaparro4769
      @javierchaparro4769 4 года назад +2

      For sure... Its rated for 350w and he is pushing 3kw+ but the gearing limiting the speed to 60 may decrease amps at top speed, so the constant wattage should be like only 1kw at full speed (still too much for that motor) but if used in short period isn't that much of a deal (maybe he could oil cool the motor)

  • @arsenioegoytorogiguinat2826
    @arsenioegoytorogiguinat2826 4 года назад

    sir may iask if i can use the three phase controller to a two wire 24 volts gear motor? if it can, how?

  • @mrwaqas6208
    @mrwaqas6208 2 года назад

    Can you make battery body and battery holder for me?

  • @SuperRaymondh
    @SuperRaymondh 4 года назад +1

    Great job gentleman. I love your reuse of old motors, scrapyard finds plus 3d printing to make what you want. Respect!

  • @salmanjutt3671
    @salmanjutt3671 4 года назад +1

    Great Bro 👍👌👍👍

  • @just2716
    @just2716 4 года назад +1

    Sir, can I ask what voltage did you use to run your hoverboard motor?

    • @st_7575
      @st_7575 3 года назад

      They use 10s Batteries and 10s batteries are 42v

    • @k_szaf
      @k_szaf 3 года назад

      Hi! In the minute 7:10 he clearly says that they're connecting the two 10s packs in series ,which provide 72v nominal (36v ×2), and 84v fully charged (42v × 2).

  • @biplabshankar8360
    @biplabshankar8360 4 года назад

    Please show how we can make a tool hanger like you....

  • @fadmad2389
    @fadmad2389 9 месяцев назад

    Where are you guys located? I am assuming Pakistan. If yes, where in Pakistan?

  • @greenfueltechnologyhhogogr9813
    @greenfueltechnologyhhogogr9813 3 года назад

    Hey guys ul rock I see your video regular it seems ul r professional doing all that diy great. I want to develop a small scooter with 220v brush motor with 12v battery inverter is it practical what would be its pros and con if I do plz explain

  • @pasyensyatv9092
    @pasyensyatv9092 4 года назад

    your workstudio looks great like an office!

  • @mujahidahmed7355
    @mujahidahmed7355 4 года назад

    Masha allah abdul samad bhai.

  • @kapilsapkal538
    @kapilsapkal538 4 года назад

    Im going to share ur channel with my friends to get ur subscriber
    I like ur hardwork.

  • @robertmorin6495
    @robertmorin6495 2 года назад

    Congratulations on an amazing project. You sure know a lot about efficiency..Raise the seat up a bit to show what a giant you are! Be very very careful of clothing or shoe strings getting caught up in the sprockets and chain.

  • @gabrielady8146
    @gabrielady8146 3 года назад

    did you modifiy the controller ? set to low amps ? can you help me im so confuse because that hub is rated only for 350watts i think

  • @fabianlobo77
    @fabianlobo77 4 года назад

    Hey which scrap yard are you talking about at 3:10 I need to buy it too

  • @vipins444
    @vipins444 3 года назад

    Want to install this setup in my bicycle? How much does it cost?

  • @muhammadmushtaq9065
    @muhammadmushtaq9065 4 года назад

    So. You are from Pakistan😧. 😍Gd job guys subscribed 🇵🇰❤️

  • @flitsies
    @flitsies 4 года назад

    Nice idea, well done.
    The only thing is having that motor spinning so close to your feet could be dangerous.
    So perhaps some kind of cover to protect your feet and legs.