I’m wondering what the notifications setting is for under the main menu and the profile icon? Is there a way I can get notified if the unit loses AC power or things like that?
only connects to 2.4? that is so old, i cant update delta pros cuz i have newer internet router, so what do i do now eco flow? and BTW, anyone else have weird hydrogen smell from delta pro? lithium is not supposed to put out smell, only hydrogen batteries do that!!!!
It would be nice to have the app record a daily total, monthly total, energy charged from solar so we can determine our cost saving when it is receiving free solar energy. Maybe you can consider this in a future app update.
I believe that you can to change between C and F in the app. Open the app. Do not open the device. Instead select the little person silhouette in the top left corner. The first toggle option is “ temperature“. This is where to switch between C and F.
2 года назад+3
The App should also show solar input voltage and total kWh charged per day, week, month...
I want to bring up a problem I found with the new Delta 2. Here is the info I sent to EcoFlow. I want to bring up a problem I have found with the new EcoFlow Delta 2 that might be something many different people will run into. I, like many other people, have bought one of the most common renogy solar panels online. I will post a copy of the specs below of these panels. I am a previous owner of the original Delta and have recently upgraded to the Delta 2. The problem comes with the configuration of solar input amps and volts into the new Delta 2. I previously charged the original delta using three of these 100w renogy solar panels. To meet the original specifications of the ef delta (solar input 400w 65v 10A), I would wire my three solar panels in series to create 61.2v and 4.91A coming into the delta. As you are probably fully aware, it is safer and more efficient to run lower amps and higher volts across a wire. With the new setup on the ef delta 2 (solar input 500w 60v 15A), running these same solar panels in series creating the 61.2v and 4.91A is overloading the voltage for the new system. With the change in the configuration of the delta 2, re-wiring the panels in parallel makes them fall within the specifications. These three panels in parallel now create 20.4v at 14.73A. This setup is highly inefficient and creates a greater safety risk by running such high amps through wire. This new configuration has cut my solar efficiency down by nearly 75w and has increased the risk of fire by running the wires at nearly their rated amp capacity. Solution: when all is said and done, these solar panels that I am using are some of the most widely purchased panels on the market. I am fairly certain that there will be many people that run into this problem. I hope that this is a problem that could be fixed with a software update by rearranging the limits of allowed input voltage and amps. I would really like to see a feature in the software that would let you make this change very similar to how we can currently adjust the AC voltage input. If there were a way, in the software, for me to slightly increase the solar voltage input and thus lower the amp input at the same time, this would fix the problem and should still keep the delta well within its input capabilities. I hope this finds its way to the correct team and I really hope to see this change in the near future. I am very impressed with the ecoflow brand and engineering. Solar Panel Specs Renogy Module Type: RNG-100D-SS Max Power at STC (Pmax): 100 W Open-Circuit Voltage (Voc): 24.3 V Short-Circuit Current (Isc): 5.21 A Optimum Operating Voltage (Vmp): 20.4 V Optimum Operating Current (Imp): 4.91 A Temp Coefficient of Pmax: -0.37%/°C Temp Coefficient of Voc: -0.28%/C Temp Coefficient of Isc: 0.048%/°C Max System Voltage: 600VDC (UL) Max Series Fuse Size Rating: 15 A Fire Rating: Class C Weight: 6.4 kg / 14.1lbs Dimensions: 1062×530×35 mm / 41.8×20.9x1.38 in STC: Irradiance 1000 W/m?, T = 25 °C, AM=1.5
There is nothing current about the app, such as automation portion. I have just got a delta 2 max and keeps saying no device while giving me info on delta max 2
Use this app for 5 months and now it don't work can't connect keep saying network problems all other apps on my phone around 8 are working perfectly this one doesn't just stopped nothing works now I got to return the units after invested $2,500 in solar wires extra batteries all the good stuff
Bonjour, se serait parfais de faire une vidéo spécial application ecoflow river pro du début ( je n'arrive pas a me connecté ) j'ai toujours l'icône WiFi qui clignote. Merci pour vos lumières.
Try turning off mobile data and make sure you have wifi to connect to. Another guy on a different video couldn't use the app until he turned off his mobile data
I've been using this app for both my River Max and Delta. It's good to see their status and how they are performing anytime I want to.
Thanks Ecoflow for the tutorial. Planning to enjoy my Delta Pro very soon.
How I wish other power stations would have this very useful and easy to use app.
I’m wondering what the notifications setting is for under the main menu and the profile icon?
Is there a way I can get notified if the unit loses AC power or things like that?
We want the ability of changing the minimum % to a higher number. Hopefully, EcoFlow will allow this in a future app release.
only connects to 2.4? that is so old, i cant update delta pros cuz i have newer internet router, so what do i do now eco flow?
and BTW, anyone else have weird hydrogen smell from delta pro?
lithium is not supposed to put out smell, only hydrogen batteries do that!!!!
I just got my delta pro and was both suprised and dissapointed that im not able to remotely start or stop charging. Why is that?
It would be nice to have the app record a daily total, monthly total, energy charged from solar so we can determine our cost saving when it is receiving free solar energy. Maybe you can consider this in a future app update.
i agree!
LOL Ya it would also be nice to have an app that does everything for you in life.
I have a European Delta Pro and the App displays temperature in Fº. I do not know why or how to change this to Cº. Thanks for your help.
I believe that you can to change between C and F in the app.
Open the app.
Do not open the device. Instead select the little person silhouette in the top left corner.
The first toggle option is “ temperature“.
This is where to switch between C and F.
The App should also show solar input voltage and total kWh charged per day, week, month...
You think it should do all of those other things but you can’t figure out how to change temp from C to F.
Can you check unit from another location. ? I can only check when I’m in house.
Can the app send a push notification when the battery reaches 10% state of charge?
I want to bring up a problem I found with the new Delta 2. Here is the info I sent to EcoFlow. I want to bring up a problem I have found with the new EcoFlow Delta 2 that might be something many different people will run into. I, like many other people, have bought one of the most common renogy solar panels online. I will post a copy of the specs below of these panels. I am a previous owner of the original Delta and have recently upgraded to the Delta 2. The problem comes with the configuration of solar input amps and volts into the new Delta 2.
I previously charged the original delta using three of these 100w renogy solar panels. To meet the original specifications of the ef delta (solar input 400w 65v 10A), I would wire my three solar panels in series to create 61.2v and 4.91A coming into the delta. As you are probably fully aware, it is safer and more efficient to run lower amps and higher volts across a wire.
With the new setup on the ef delta 2 (solar input 500w 60v 15A), running these same solar panels in series creating the 61.2v and 4.91A is overloading the voltage for the new system. With the change in the configuration of the delta 2, re-wiring the panels in parallel makes them fall within the specifications. These three panels in parallel now create 20.4v at 14.73A. This setup is highly inefficient and creates a greater safety risk by running such high amps through wire. This new configuration has cut my solar efficiency down by nearly 75w and has increased the risk of fire by running the wires at nearly their rated amp capacity.
Solution: when all is said and done, these solar panels that I am using are some of the most widely purchased panels on the market. I am fairly certain that there will be many people that run into this problem. I hope that this is a problem that could be fixed with a software update by rearranging the limits of allowed input voltage and amps. I would really like to see a feature in the software that would let you make this change very similar to how we can currently adjust the AC voltage input. If there were a way, in the software, for me to slightly increase the solar voltage input and thus lower the amp input at the same time, this would fix the problem and should still keep the delta well within its input capabilities. I hope this finds its way to the correct team and I really hope to see this change in the near future. I am very impressed with the ecoflow brand and engineering.
Solar Panel Specs
Renogy
Module Type: RNG-100D-SS
Max Power at STC (Pmax): 100 W
Open-Circuit Voltage (Voc): 24.3 V
Short-Circuit Current (Isc): 5.21 A
Optimum Operating Voltage (Vmp): 20.4 V
Optimum Operating Current (Imp): 4.91 A
Temp Coefficient of Pmax: -0.37%/°C
Temp Coefficient of Voc: -0.28%/C
Temp Coefficient of Isc: 0.048%/°C
Max System Voltage: 600VDC (UL)
Max Series Fuse Size Rating: 15 A
Fire Rating: Class C
Weight: 6.4 kg / 14.1lbs
Dimensions: 1062×530×35 mm / 41.8×20.9x1.38 in
STC: Irradiance 1000 W/m?, T = 25 °C, AM=1.5
There is nothing current about the app, such as automation portion. I have just got a delta 2 max and keeps saying no device while giving me info on delta max 2
Use this app for 5 months and now it don't work can't connect keep saying network problems all other apps on my phone around 8 are working perfectly this one doesn't just stopped nothing works now I got to return the units after invested $2,500 in solar wires extra batteries all the good stuff
Not helpful. How does the internet settings work? Nothing shows. Do I have to enter my home internet info?
Yes you connect to your home wifi and enter your wifi password
Bonjour, se serait parfais de faire une vidéo spécial application ecoflow river pro du début ( je n'arrive pas a me connecté ) j'ai toujours l'icône WiFi qui clignote. Merci pour vos lumières.
This app will not work on my older Samsung Galaxy S8 phone or our newer S21. Junk at this point!
Try turning off mobile data and make sure you have wifi to connect to. Another guy on a different video couldn't use the app until he turned off his mobile data
She sounds like Karen down the street