Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ruclips.net/user/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Please do the graphene headlight restoration kit. I am very interested in that. By the way, I'm a big fan of your videos. They're so detailed and I learned so much about detailing. Especially your explanation on getting more foam out of my foam cannon.
I bought the MJJC from your reviews and it’s definitely the best. Love that thing. and I love the ball weight on the pickup tube so it’s always in the soap and doesn’t just start spraying water when you’re foaming like others do.
Sir, you are the Michael Jordan of detailing cars. Your knowledge and videos clarify so many minute details (pun not intended). All of these companies should send you a monthly check. I can’t believe one of them hasn’t hired you as their spokesperson. Thank you. I’m writing Santa a letter and asking for a pressure washer thanks in no small measure to you, sir. Leaning towards Adams’s 2.0 thanks to your review. Gonna get the 1.1 orifice you recommend for such a machine. God bless you, brother. Once again, send this man a monthly check. He’s making you all (Adam’s, Chemical Guys, etc. a ton of money). Liked and subscribed. And once again, thank you.
Speaking of the threads on the fittings, you should know that they are two completely different thread types. It's not that one is just shorter than the other. O-ring seal vs pipe thread. There aren't interchangeable. They both have their strengths and weaknesses. Pipe threads will rarely ever leak if assembled correctly with teflon tape. O-ring fittings work great until the o-ring fails.
Would like to see some more blow dryers with heat options like the one you did a few weeks ago if possible. thanks for all your vids, been very helpful
That’s the one I bought and it works fantastic. I put the 1.1 orifice in it. I just I’m put the MJJC filters in it. I’ll let you know if that makes even a bigger difference!
Entertaining and quite informative ! Like the opinions a lot ...much better that browsing amazon not knowing what the products feel like or work like. Thanks for the reviews and insights your channel really rocks !
After watching your video, I took apart my Chemical Guys big mouth foam cannon & put the foam maker & orifice from it in my Adam’s foam cannon…. CRAZY difference in thickness of soap.
Hey josh just wanted to say thanks been watching lots of your videos getting ready to wax my truck finally bought myself the the maxshine m8s and some 3d speed did my truck this weekend came out great so glad i saw your videos 👍
Foam cannons in general seem to be so expensive at an average of $80 for a good quality one. I will definitely buy an Adam's or MJJC when I see it in the
25:55 - 4 oz of Mr. Pink in this comparison? Weren't you using only 2 oz per liter in all the other cannons? Would like to see this using the same ratio as the others and let us know how it does.
Hi, great video, thanks. But . . . you talk about “mega-foam” but don’t say if that is a replacement for the Adam’s car shampoo or an accompaniment. First time user here so do I use car shampoo or mega-foam. What is the difference?
not really video related but i have black light soap by chemical guys and it out preforms mega foam imo as far as cling and foam . im using the mjjc with the 1.1
I would like to see a comparison between foams with and without protection. I’m using the Meguiars ultra ceramic hybrid and I don’t know if it’s the soap or my cannon.
Quick question, would it be worth it to dress the O rings with a light light film of silicone O ring dressing? I dress all other O rings I have to protect them from stretch and abrasion.. Love the Adams Foam Cannon, way way heavier than expected, super construction. Good video.
The orifice link you sent doesn’t work. I bought some stainless orifices but the head of them are not the same size as the one that came out of the Adams premiumn foam cannon. It was a bundle I bought that came with a bottle of mega foam.
I just bought that cannon, but it didn't work too well for me with the griots soap, I'll try Mr. Pink. I did swap my orifice, per your past vids and advice. Will wait to test with a different soap. And see if there is a difference.
Chemical Guys makes Mr. Pink but they also make a better product called Honeydew Snow Foam Auto Wash and it foams more than Mr Pink. Great value at $29 a gallon on Amazon too. Creates thick foam
Good evening I have a black traverse all black the problem I'm having I have soft black paint what kind of terry cloth rag can I use on it so I won't get swirl marks on the vehicle I'm practicing detailing on my own vehicle watching a lot of videos and learn how to do the basics on the cars but I'm stuck now with my car with the soft black paint I appreciate the feedback
I can not get foam out of my MJJC cannon at all!! I’ve tried everything…even exchanged it for another. Absolute total waste of money. I’m going to buy an Adam’s foam cannon and see if it does any better.
I've recently started using the Adams Premium Cannon paired with a Comet Static pressure washer. No modifications to the cannon. The Comet is 1k lbs and close to 2 gal/ min. Using Chem Guys Melon soap... the foam is soooo thin. I've seen other vids that shifting to a 1.1mm in the cannon does not pair well with the Comet. Can anyone help? I'm open to using an MJJC cannon. Tell me how to get amazing foam.
Great Review. I have the Adams Foam Cannon and Was Looking into switching to the 1.1m orifice. Looks like the one you recommended is no longer available. Any others you suggest ? Thanks. Great Content
Really wanted to like Adam’s, placed my first order and never got any spray nozzles. Customer service was quick to fix but still takes 3 days to ship. Item arrived and it was still missing all of the spray nozzles. Gave up on them.
Prime day I got this cannon, a bottle of mega foam, and a wash mitt foe 56$ ill take it lol. I needed soap anyways and my armor all foam cannon leaked and wasn't the best. And already had a 1.1mm orphis laying around
I got a question. I have that adams foam cannon and also a gas powered pressure washer. I’m new to foam cannons and I couldn’t get it to foam like that. It was mainly watery soap. Did I not use enough soap foam and too much water??
I ordered this Adam's Foam Cannon, and I clicked on your link for the smaller orifice. I was sent two silver (stainless?) orifices that were too small. Is the link messed up or did they send me the wrong item? Are the diameter measurements .38 inches?
How do I find a good car detailer? I’m in Oxnard California. Also how much should I expect to pay for a good exterior detail of a 2013 Honda pilot. I’d like to get it nice and cleaned up for my son who is just starting to drive.
@@coop4274 I was referring to the Boss foam cannon which used to be $85 and now at $99, has a metering pickup ball and is made of stainless steel. The $58 is smaller, made of aluminum and no metering ball.
hey just got mine today running in to a problem the cannon just shoots straight doesn’t spread at all for reference it comes out as if using a water hose
This a complete 99% rip off a MJJC Mk2. They are not even hiding it or trying to innovate. Are MJJC making these for Adam’s? MJJC is the only company out there that listened to feedback and made Best foam cannon on the Market. MJJC is now industry standard around the World. There is absolutely no need for PTFE on the joint on a MJJC MK2. I presume you took a back hander from Adam’s?
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ruclips.net/user/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Please do the graphene headlight restoration kit. I am very interested in that. By the way, I'm a big fan of your videos. They're so detailed and I learned so much about detailing. Especially your explanation on getting more foam out of my foam cannon.
I bought the MJJC from your reviews and it’s definitely the best. Love that thing. and I love the ball weight on the pickup tube so it’s always in the soap and doesn’t just start spraying water when you’re foaming like others do.
Yea it’s by far the best one!!
Sir, you are the Michael Jordan of detailing cars. Your knowledge and videos clarify so many minute details (pun not intended). All of these companies should send you a monthly check. I can’t believe one of them hasn’t hired you as their spokesperson. Thank you.
I’m writing Santa a letter and asking for a pressure washer thanks in no small measure to you, sir. Leaning towards Adams’s 2.0 thanks to your review. Gonna get the 1.1 orifice you recommend for such a machine. God bless you, brother.
Once again, send this man a monthly check. He’s making you all (Adam’s, Chemical Guys, etc. a ton of money). Liked and subscribed. And once again, thank you.
I bought one and will be using it for the first time next week. Thanks for the review.
Although I use a lot of CG products, I’m not a Mr. Pink fan. Use the Adam’s foam Cannon with their Mega Foam. It’s a killer combination
Did you try maxi suds or honey dew
Speaking of the threads on the fittings, you should know that they are two completely different thread types.
It's not that one is just shorter than the other. O-ring seal vs pipe thread.
There aren't interchangeable. They both have their strengths and weaknesses. Pipe threads will rarely ever leak if assembled correctly with teflon tape. O-ring fittings work great until the o-ring fails.
Would like to see some more blow dryers with heat options like the one you did a few weeks ago if possible. thanks for all your vids, been very helpful
Great review. I'd love to see you review everything they sent! Still can't go wrong with the MJJC foam cannon!
That’s the one I bought and it works fantastic. I put the 1.1 orifice in it. I just I’m put the MJJC filters in it. I’ll let you know if that makes even a bigger difference!
Entertaining and quite informative ! Like the opinions a lot ...much better that browsing amazon not knowing what the products feel like or work like. Thanks for the reviews and insights your channel really rocks !
After watching your video, I took apart my Chemical Guys big mouth foam cannon & put the foam maker & orifice from it in my Adam’s foam cannon…. CRAZY difference in thickness of soap.
Nice!!
I use the Graphene Tire Dressing and absolutely love it. It typically last about 2 weeks for me
If you put the mjjc filters in this foam cannon with a 1.1mm orifice it shoot foam as thick as the mjc v2
Not quite. It makes it better though
Hey josh just wanted to say thanks been watching lots of your videos getting ready to wax my truck finally bought myself the the maxshine m8s and some 3d speed did my truck this weekend came out great so glad i saw your videos 👍
I did buy this foam cannon when adams was running a sale. Can’t wait to try it
Josh...Nice job! The 2 Winners of today is you getting the free stuff and your work van that got a bath 😎
Foam cannons in general seem to be so expensive at an average of $80 for a good quality one.
I will definitely buy an Adam's or MJJC when I see it in the
25:55 - 4 oz of Mr. Pink in this comparison? Weren't you using only 2 oz per liter in all the other cannons? Would like to see this using the same ratio as the others and let us know how it does.
Hey John with the soap tests I was stating the exact amount to compare. For the foam cannons, i always do it to a small fill line which is about 4oz
Hi, great video, thanks. But . . . you talk about “mega-foam” but don’t say if that is a replacement for the Adam’s car shampoo or an accompaniment. First time user here so do I use car shampoo or mega-foam. What is the difference?
Thanks for this video. Just bought this Foam cannon and the 1.1mm Orifice. Gonna try it out later.
not really video related but i have black light soap by chemical guys and it out preforms mega foam imo as far as cling and foam . im using the mjjc with the 1.1
I would like to see a comparison between foams with and without protection. I’m using the Meguiars ultra ceramic hybrid and I don’t know if it’s the soap or my cannon.
Typically ceramic infused don’t foam as much. I’m going to be testing a few ceramic soaps soon!!
Would like to see this canon with the MJJC foam filter set
Quick question, would it be worth it to dress the O rings with a light light film of silicone O ring dressing? I dress all other O rings I have to protect them from stretch and abrasion.. Love the Adams Foam Cannon, way way heavier than expected, super construction. Good video.
Thanks for your videos. Great help for me. I ordered the Adams foam gun and the after market 1.1 orfice. Appreciate ya
I think I posted on one of your other videos that I did replaced the internal filter with the MJJC3 filter and it definitely gets more foam now..lol
The orifice link you sent doesn’t work. I bought some stainless orifices but the head of them are not the same size as the one that came out of the Adams premiumn foam cannon. It was a bundle I bought that came with a bottle of mega foam.
I just bought that cannon, but it didn't work too well for me with the griots soap, I'll try Mr. Pink. I did swap my orifice, per your past vids and advice. Will wait to test with a different soap. And see if there is a difference.
Mr pink is #2 and megafoam is best foam
@@derekbittle7114I've also hear Adams Mega Foam is good, but it's a bit on the pricier side. Thanks for the advice bud. I appreciate it.
@@richrnndz2 it is, but Mr. Pink is close 2nd
Chemical Guys makes Mr. Pink but they also make a better product called Honeydew Snow Foam Auto Wash and it foams more than Mr Pink. Great value at $29 a gallon on Amazon too. Creates thick foam
@@10SecondZ06 I returned the Foam Cannon, will be buying the MJJC recommended on here, seems to perform better anyway.
3:03 yes, review this, I’m interested to see how it works. Thanks
Great review, always informative and helpful! Will be changing out to a 1.1 in my Adam’s now that I know it truly makes a difference!
Thanks!
I would like to see a reaction to the headlight restoration
Cerakote Ceramics kit, guaranteed for life.
👍👍
Hey Josh. The mjjc that is in your link comes with the 1.1 mm orfice or the 1.25 mm orfice.
Good evening I have a black traverse all black the problem I'm having I have soft black paint what kind of terry cloth rag can I use on it so I won't get swirl marks on the vehicle I'm practicing detailing on my own vehicle watching a lot of videos and learn how to do the basics on the cars but I'm stuck now with my car with the soft black paint I appreciate the feedback
Good product! Looks like it will last a long time!! Love your videos-😍
great review! you should review the blackline car care foam cannon, curious to hear your opinion on that
Looks like a well made product, thanks Josh 👍😁
Thanks dave
I can not get foam out of my MJJC cannon at all!! I’ve tried everything…even exchanged it for another. Absolute total waste of money. I’m going to buy an Adam’s foam cannon and see if it does any better.
I don't even use foam cannons. Pain in butt tbh
I've recently started using the Adams Premium Cannon paired with a Comet Static pressure washer. No modifications to the cannon. The Comet is 1k lbs and close to 2 gal/ min. Using Chem Guys Melon soap... the foam is soooo thin. I've seen other vids that shifting to a 1.1mm in the cannon does not pair well with the Comet. Can anyone help? I'm open to using an MJJC cannon. Tell me how to get amazing foam.
Great Review. I have the Adams Foam Cannon and Was Looking into switching to the 1.1m orifice. Looks like the one you recommended is no longer available. Any others you suggest ? Thanks. Great Content
Really wanted to like Adam’s, placed my first order and never got any spray nozzles. Customer service was quick to fix but still takes 3 days to ship. Item arrived and it was still missing all of the spray nozzles. Gave up on them.
Oh man that’s a bummer… I always order them right off Amazon… the only problem is you can usually get 15-20% off on the Adams site
Not Adams related, but thanks for recommending the Car Glo soaps. Picked up two bottles and that stuff is awesome, really love the smell too.
Absolutely! Car glo is a great company!!
Prime day I got this cannon, a bottle of mega foam, and a wash mitt foe 56$ ill take it lol. I needed soap anyways and my armor all foam cannon leaked and wasn't the best. And already had a 1.1mm orphis laying around
Great instructional and demonstration video. Will definitely save for future reference.
Glad it was helpful!
I got a question. I have that adams foam cannon and also a gas powered pressure washer. I’m new to foam cannons and I couldn’t get it to foam like that. It was mainly watery soap. Did I not use enough soap foam and too much water??
Please if didn’t do the graphene headlight restoration kit, please please go on for it
Foam is great but how is the lubrication of the soap
I changed mine to 1.1 and it seems like it’s super restricted. It doesn’t spray the foam that far.
I ordered this Adam's Foam Cannon, and I clicked on your link for the smaller orifice. I was sent two silver (stainless?) orifices that were too small. Is the link messed up or did they send me the wrong item? Are the diameter measurements .38 inches?
How do I find a good car detailer? I’m in Oxnard California. Also how much should I expect to pay for a good exterior detail of a 2013 Honda pilot. I’d like to get it nice and cleaned up for my son who is just starting to drive.
What aftermarket pressure gun you are mostly using?and if it’s out of stock when can I find it in stock?
I'm really new to this. And I have a question: can I attach a foam GUN (not a foam Cannon) to a pressure washer?
Looks really well made even if it doesn't foam as much as the MJJC, also cheaper than the Griot's which is now at $99
👍👍👍
Wrong. The griots garage foam cannon is only $58 on Amazon. Just bought one a week ago.
Griot’s is only $58 on Amazon. Just bought one.
@@coop4274 I was referring to the Boss foam cannon which used to be $85 and now at $99, has a metering pickup ball and is made of stainless steel. The $58 is smaller, made of aluminum and no metering ball.
MJJC better than griots.
Do you know how to connect this or a similar foam cannon to a Ryobi EZ Clean power cleaner?
I’m fairly new to detailing. But would this foam cannon perform well with the ryobi 1900?
love adams foam cannon
The microfiber wand to clean wheels
Great review! Thank you!
hey just got mine today running in to a problem the cannon just shoots straight doesn’t spread at all for reference it comes out as if using a water hose
Did you spin the nozzle? It should change between 0-45 degree fan
@@imjoshv yea tried vertical and horizontal, vertical shoots straight horizontal doesn’t shoot kinda just squirts everywhere?..
Yeah Hawaii Tesla name is Jeremy lol the Yeaaah guy!
Bro your videos are the best
Thanks so much!!
It leaks if Left tilt … works great but leaks a lot
Thanks for the info brother 👍💪
hey! love your content I you haven't already.. Can you review p&s pearl shampoo
What’s the chance that the MJJC filters fit on the Adams gun?
I think it should
@@imjoshv would that help with the amount of suds as the MJJC? Maybe you can put it to the test.
OK instructions say 1- 2 ounces why 4 ounces not arguing just curious.
These things are soap hogs.
The mister pink leaves a residue on my car when spraying it. is that normal.
Yea me pink can do that, you have to rinse it off a lot.
There is definitely an additive in Mr Pink that makes it sticky.
Stuff is too concentrated
Best videos 👍👍
🙏 thank you
Hey, maybe they will send their air cannon dryer for review.
Ha that would be cool!
👍👍
I have the Chemical Guys gun. Sucks
A word of advice: research fast hair growth shampoo to double hair growth.
I love your orfice 😂😂😂
This a complete 99% rip off a MJJC Mk2. They are not even hiding it or trying to innovate. Are MJJC making these for Adam’s? MJJC is the only company out there that listened to feedback and made Best foam cannon on the Market. MJJC is now industry standard around the World. There is absolutely no need for PTFE on the joint on a MJJC MK2. I presume you took a back hander from Adam’s?
1ST TO COMMENT
☝️☝️
First