Please remember, when you are watching RUclips videos, if you THINK it is going too fast, position your mouse cursor over the pause button, hit it, write down, or make notations as needed, then continue. ALSO, this video is SO NICELY SHORT AND TO THE POINT, that you CAN repeat view, as needed, and NOT feel like you have just wasted 30 years of your life staring at a screen =D
Great video! TY for explaining how to tell your software you are embroidering an applique! To slow down the speed of the video, I clicked on the settings icon (looks like a gear) at the bottom of the video and changed the playback speed to .75.
Thank you for this video, I learned a lot. Getting ready to upgrade my machine and dig in. Im a longarmer as well. Have 5 grandaughters 4 and under and they all have 2 or 3 quilts each. I need to get embroidering.
love it so simple. Pity my embroidery machine has done a motherboard after 10 years of work. But I could still use this as a cutting file with my brother Scan n cut. Thank you for sharing.
Thank you for this informative video.I was persuaded to buy a Silhouette and I already own Embrilliance. I'm having a problem with the same applique monogram you're using in the video. When I save it and then open it in Silh, it's either a blob outline or bits and pieces. Any suggestions would be appreciated. Thanks again!
Wish this was done with an image that would have made it easier to see than swirly letters! Guess I need to find something prior to this to understand it.
Adding color stops for the run stitches may do the trick. Be sure to reach out to tech support if you need more details! Http://embrilliance.com/contact-us/
Can you use a multiposition hoop in an applique design? I imported a design I bought and essentials didn't recognize it as an applique. I was a huge mess.
When I try this with the same letter you are using I only get a few blobs in the silhouette. The letter M seems to work, but any letter that crosses itself does not seem to work. I purchased this program to save time in applique designs. Please help!
I understand this process, but I cannot figure out why when I print the ‘work sheet’, not ALL steps are shown, e.g. placement stitch, tack down, and satin, so when I plug in the USB to my multineedle, and I am putting in the ‘stops’, it is not listing ALL steps. Placement stitch STOP (to place down fabric), tack down STOP (to trim fabric): etc
I am trying to convert applique designs from some designs I purchased. When I "open" the design in Essentials, the design won't "expand". I've contacted the design developer to find out if there is a "lock" on the designs. Could that be my problem here? What are your thoughts?
Please remember, when you are watching RUclips videos, if you THINK it is going too fast, position your mouse cursor over the pause button, hit it, write down, or make notations as needed, then continue. ALSO, this video is SO NICELY SHORT AND TO THE POINT, that you CAN repeat view, as needed, and NOT feel like you have just wasted 30 years of your life staring at a screen =D
Great video! TY for explaining how to tell your software you are embroidering an applique! To slow down the speed of the video, I clicked on the settings icon (looks like a gear) at the bottom of the video and changed the playback speed to .75.
Thanks for sharing your tip so that others may learn! Enjoy!!
Thank you for making things so simple when die cutting for machine applique. I love it!
Wonderful addition to your entire program
Thank you for this video, I learned a lot. Getting ready to upgrade my machine and dig in. Im a longarmer as well. Have 5 grandaughters 4 and under and they all have 2 or 3 quilts each. I need to get embroidering.
love it so simple. Pity my embroidery machine has done a motherboard after 10 years of work. But I could still use this as a cutting file with my brother Scan n cut.
Thank you for sharing.
I am tripping out!! SVG FILES? Thank you LISA!!
Thank you for this informative video.I was persuaded to buy a Silhouette and I already own Embrilliance. I'm having a problem with the same applique monogram you're using in the video. When I save it and then open it in Silh, it's either a blob outline or bits and pieces. Any suggestions would be appreciated. Thanks again!
Wish this was done with an image that would have made it easier to see than swirly letters! Guess I need to find something prior to this to understand it.
Check the other videos on Remove Hidden Stitches.
@BriTonLeap is there a way to take a stich out design and make it into an applique? The stich out file is just one big stich out without any stops
Adding color stops for the run stitches may do the trick. Be sure to reach out to tech support if you need more details! Http://embrilliance.com/contact-us/
Can you use a multiposition hoop in an applique design? I imported a design I bought and essentials didn't recognize it as an applique. I was a huge mess.
I have even now went and purchased this font from River Mill and it still will not work. :(
When I try this with the same letter you are using I only get a few blobs in the silhouette. The letter M seems to work, but any letter that crosses itself does not seem to work. I purchased this program to save time in applique designs. Please help!
how after creating a file using Essentials, how do I save it to my USB? SAVE STITCH FILE?
I understand this process, but I cannot figure out why when I print the ‘work sheet’, not ALL steps are shown, e.g. placement stitch, tack down, and satin, so when I plug in the USB to my multineedle, and I am putting in the ‘stops’, it is not listing ALL steps. Placement stitch STOP (to place down fabric), tack down STOP (to trim fabric): etc
You should start a conversation with support to figure out what is going on. www.Embrilliance.com/contact-us
I am trying to convert applique designs from some designs I purchased. When I "open" the design in Essentials, the design won't "expand". I've contacted the design developer to find out if there is a "lock" on the designs. Could that be my problem here? What are your thoughts?
+Rita Decook All questions should be sent to customer support!
embrilliance.com/contact-us/
CAN I USE THIS WITH THE BROTHERS Scan N Cut
what about Cricut cutting system?
I was able to finally get a design to expand. I think it was my "mouse" having problems.
Excellent! Thank you
Can I use this on my Husqvarna Viking machine?
+Collette Batten Yes! All questions should be sent to customer support!
embrilliance.com/contact-us/
doing everything she says and it isn't working. It won't even show me a or put an applique material in.
You need to SLOW done for these old ears....they don’t hear fast enough!!!😉
Can I import my JPEG files into the program?
+madrid556 All questions should be sent to customer support!
embrilliance.com/contact-us/
I found it!!
Great!
This video is too fast. However, I don't see a pause button anywhere? Since this video is 9 years old, I'm out of luck!
I see you found the button. However. You can adjust speed of videos on RUclips :)
This is too difficult to follow. I stopped after 1 minute.
Going way to fast for me. You need more like 45 minutes for this video.
+Sandy Bauer Check out the pause, rewind and speed functions of youtube.
for someone that is learning the program, she goes to fast.
Yes she does. I couldn't write fast enough and watch she was clicking so fast.
Click on your settings icon at the bottom of the video (looks like a gear) and change the playback speed to .75 :)
Too confusing.
Reach out to support and tell them where you are getting lost. Http://embrilliance.com/contact-us/
This was not very helpful
Sorry! Reach out to support so that they can direct you to videos that relate to your situation!
Http://embrilliance.com/contact-us-2