Thanks again for nice videos! I think you should make special videos just for 3D printer modeling..... so I don't want to watch sheetmetal stuff that I don't do....etc. Keep up the great work!
Thnx Lars. The Flange dialog box on my screen is too narrow so i can not see (and change) the values of the material (thickness, K-factor ....). Is the width of the dialog boxes also a setting?
Hi Eric Van der Steen Thank you for watching! In the upper left of the dialog box you will find two (very) small vertical lines. You can drag the dialog box size there.
Gidday Lars :) Sorry to bother you but I'm struggling with trying to join a sculpted object (like a box) to the outside face of a Torus so it flows from one to the other, i.e. I'm sculpting the box to match the outside face of the Torus but how do I bridge/join/loft them to make one body. I'm trying to join to only a small section of the torus's outside circumference e.g a 90 degree segment.Appreciate your time :)
Hi buddwieser Thank you for watching! You can merge to open edges, but remember that sculpt will always create curvature, so your shape will most likely be changed. You could also go out of the sculpt environment and join it as bodies or surfaces as we have done on the livestreams a few times Best, Lars
Many thanks Lars I may have over simplified my question, I'm stretching out the box into quite a long shape like an aeroplane and joining the torus on either like nacelles, so I'm trying to join the torus to only a small area, when I go back into model the whole side of the fuselage becomes a face way to big to join to the torus. Can I create a face the size and shape I want on the large sculpt fuselage in model to restrict the loft surfaces and maintain the shape. Thanks again for your time :)
ola, o meu processo não deu certo, na hora de usar o patterns, diz que eu tenho que separar os dois lados! como posso resolver este problema? segui seu passo a passo, mas o meu deu este problema na hora de deixar plano, por conter 2 partes, so fica plano quando eu excluo o outro lado
muito obrigado por responder, quando vou usar o modo plano, não funciona quando faço a combinação de 2 peças, mas se eu desconectar as peças, ai ele vai para o modo plano
I made a short test with this new flow toolpath. It generates no good toolpath i think. There are many zig zag moves. With 3D contour it look much better.
Lars Christensen U r the smartest, we only see u as Autodesk fusion 360 promoter and no one better. I have on ur suggestion forwarded on link provided by you ..
Hope you guys enjoy these highlights! Thank you for watching!!
The FLOW looks like it might become my new favorite cam feature
Thanks for showing it to Lars!
Yes, this is really cool. Thank you for watching Sam
i watch the fusion videos on updates, which explains what is new, but you do a great job of explaining how/why these things affect us - thank you!!
That is awesome to hear KevCarrico .Thank you for watching the videos AND have an awesome AWESOME day!!
Invaluable Lars, thank you.
That is awesome to hear Spike Kent .Thank you for watching the videos
It’s Christmas man⛄️
Merry Christmas Lars.
Merry Christmas Stephen :-)
Thanks again for nice videos! I think you should make special videos just for 3D printer modeling..... so I don't want to watch sheetmetal stuff that I don't do....etc. Keep up the great work!
Hi Tony Fleming Thank you for watching!
What specifically do you want to see with 3D printing? What troubles do you run in to?
Kudos to the development team for that change to the tool editor
Yes, that was one of those that just make it nicer on the eyes :-)
Thnx Lars. The Flange dialog box on my screen is too narrow so i can not see (and change) the values of the material (thickness, K-factor ....). Is the width of the dialog boxes also a setting?
Hi Eric Van der Steen Thank you for watching! In the upper left of the dialog box you will find two (very) small vertical lines. You can drag the dialog box size there.
Wish they would have a print from whatever area of Fusion 360 you are and have a print to scale option as well like a lot of other CadCam systems do
Hi Darren Vosper Thank you for watching!
That is not a bad request at all!!!
Best,
Lars
I don't see an email?
I'd like to discuss deploying this software on an older cnc
Love the videos
Hi adam bohm Thank you for watching!
lars.christensen@autodesk.com
Gidday Lars :) Sorry to bother you but I'm struggling with trying to join a sculpted object (like a box) to the outside face of a Torus so it flows from one to the other, i.e. I'm sculpting the box to match the outside face of the Torus but how do I bridge/join/loft them to make one body. I'm trying to join to only a small section of the torus's outside circumference e.g a 90 degree segment.Appreciate your time :)
Hi buddwieser Thank you for watching!
You can merge to open edges, but remember that sculpt will always create curvature, so your shape will most likely be changed. You could also go out of the sculpt environment and join it as bodies or surfaces as we have done on the livestreams a few times
Best,
Lars
Many thanks Lars I may have over simplified my question, I'm stretching out the box into quite a long shape like an aeroplane and joining the torus on either like nacelles, so I'm trying to join the torus to only a small area, when I go back into model the whole side of the fuselage becomes a face way to big to join to the torus. Can I create a face the size and shape I want on the large sculpt fuselage in model to restrict the loft surfaces and maintain the shape.
Thanks again for your time :)
You could just cut a hole in the big surface abnd use that....I belive :-)
I managed to do it another way! I love Fusion 360!! And your videos are brilliant thanks Lars have a great Christmas.
ola, o meu processo não deu certo, na hora de usar o patterns, diz que eu tenho que separar os dois lados! como posso resolver este problema? segui seu passo a passo, mas o meu deu este problema na hora de deixar plano, por conter 2 partes, so fica plano quando eu excluo o outro lado
Hi Bruno Oliveira Thank you for watching!
Not sure what causes this. Did you unfold or use flat pattern?
muito obrigado por responder, quando vou usar o modo plano, não funciona quando faço a combinação de 2 peças, mas se eu desconectar as peças, ai ele vai para o modo plano
I made a short test with this new flow toolpath. It generates no good toolpath i think. There are many zig zag moves. With 3D contour it look much better.
Hi Captain DJ Thank you for watching!
Did you make sure the arrows were all pointing the right direction?
Best,
Lars
Dec release says it rectified rendering problem wherein in windows the moment we select rendering Fusion crashes. Mine is still crashing
That is not cool!!!! You need someone smarter than me.....please contact support:
help.autodesk.com/view/fusion360/ENU/?page=support
Lars Christensen
U r the smartest, we only see u as Autodesk fusion 360 promoter and no one better. I have on ur suggestion forwarded on link provided by you ..