New subscriber here (thanks, RUclips algorithm!) - loved this video! The build turned out GREAT and I learned a lot from you that I'm going to try myself (I'm a bit of a newbie). Plus, I like your style, my man! Glad I found you and looking forward to seeing more!
Thank a lot! It's just a DIY paint booth held up with poster board and duct tape! 🤣 this is just a ventilation van from amazon. if you want a little more information you can watch my Set Up tour I posted last week. www.amazon.com/AC-Infinity-RAXIAL-Booster-Controller/dp/B07ZPC5GTX/ref=sr_1_5_pp?crid=23P5SHH7BJYBM&keywords=ventilation+fan&qid=1699299360&sprefix=ventala%2Caps%2C104&sr=8-5
Painting for sure I try and give 24 hours. Painting to clear coating. Priming to painting just about 3-6 or so hours depending how thick of a prime job I do!
I’m printing the one piece file from them for my son. Right now almost half way done printing. I realize it’s going to be difficult for him to get on and off hoping I can somehow remove the rear panel without ruining the helmet.
Hey, thank you so much for the compliment. Yes, here is an amazon link which is the cheapest I could find: (amazon) amzn.to/3wHFH3e But if you don't mind waiting for shipping, you are able to get these a lot cheaper if you order from sites like Ali Express: www.aliexpress.us/item/3256801092822609.html?spm=a2g0o.productlist.main.5.7b885939mkLUWG&algo_pvid=c47f7d7e-4ff9-4f30-8b57-2ebe9f4e42f8&algo_exp_id=c47f7d7e-4ff9-4f30-8b57-2ebe9f4e42f8-2&pdp_npi=4%40dis%21USD%212.50%211.75%21%21%212.50%211.75%21%40210318ec17090653536942475ea2f3%2112000015559723678%21sea%21US%212631394779%21&curPageLogUid=VKOtdjQxiEod&utparam-url=scene%3Asearch%7Cquery_from%3A
What and how can I have those supports? I have the same printer and may I have the files ( pls respond within 3 days of me sending this ) like maybe a link I could use to get the file to download because your supports are way more simpler and conserving
The supports you saw in this video was Elegoo Cura tree supports. But they are terrible and I wouldn’t recommend it. UltiMaker Cura Tree supports are so much better and I recommend using those! ultimaker.com/software/ultimaker-cura/ This should set you right! 👊🏾
Hey dude I really really wanna 3d print helmets and weapons, but I don’t own a 3d printer or a computer so would you recommend me some cheap 3d printers for 3d printing helmets and weapons and how to 3d print with a iPad?
You can get the printer I use for under $300 now you don’t want to go too cheap because obvious reasons. This is the Elegoo Neptune 3 Plus. Hope this helps
I’m pretty sure you’ll be fine, but you have to remember even if we use the exact same everything, environment plays a major factor in 3d Printing. So don’t expect the same results.
I use Bondo glazing spot and acetone and rub it on the print! I explain it more in this video: ruclips.net/video/5oguoud8_mo/видео.html Check about the 3:11 mark.
@@PixelForgeLab HEY!!! yeah no worries, I'm pretty sure you guys carry Rest-Oleum Primer Filler, it comes in Red and Grey. www.amazon.com/Rust-Oleum-249279-Automotive-11-Ounce-Filler/dp/B003CT4AMA/ref=sr_1_6?crid=3WDVVBVHUGLE&keywords=primer%2Bfiller&qid=1699894381&sprefix=primer%2Bfiller%2Caps%2C98&sr=8-6&th=1
Yes, I've have done shorts on my settings before, you can view that video right here: ruclips.net/user/shortsInWH3nbom0w But I will be starting a Patreon shortly where you will have exclusive access to all my settings, and it will only cost $1.
What 3D printer are you using? I used my ender 3 pro and a good tip i found is to put some gluestick on the plate where the print will be and that should help
This is a Do3D file which usually cost money. From my experience the better files usually cost money. They’re are cut up to fit smaller printer and they spend time on the details as well as implement magnet holes. Just overall better files. IMO!
I'm inspired af!
I was specifically looking for Red Hood tutorials when I came across this one I'm ready to start putting in the work
Thanks homie that sounds awesome! If you want I’ll love to see your results DM pic on IG when it’s done
For only 1.21k subs it’s crazy how high quality your videos are,great job man keep going👍👍
Thanks man!!! My day will come one day! I’ll just keep grinding 🙌🏾
Been following a while my guy and the quality in your work has just gone to another level! Keep up the great work G 👏
Thank you so much!! With each video I always try to improve the quality of my builds and the quality of my video. Thank you for noticing. 🙌🏾
Turned out great, looks awesome.
Thank you so much!!!
the quality of these videos is great I love your personality and the love you put in your craft as well as the world…keep it up
I try to put in the love and personality, but sometimes my camera just won't cooperate! Thanks for noticing the effort.
Your Videos are awesome. You deserve much More attention. Keep going G.
Thank you so much!!! The more I get people like you showing support the more other people fine me! 🫶🏾
Yo it looks so clean!
Thanks bro! ✊🏾
Helmet came out 🔥🔥. Love the thorough explanation of your sanding and painting process! Appreciate your videos man!
Thank you so much I appreciate the support!
Thank you so much if you guys ever need anything broken down further feel free to asked
New subscriber here (thanks, RUclips algorithm!) - loved this video! The build turned out GREAT and I learned a lot from you that I'm going to try myself (I'm a bit of a newbie). Plus, I like your style, my man! Glad I found you and looking forward to seeing more!
Thank you so much for the sub! And welcome to the channel. I have so much to offer so stay tuned, I’m glad you’re here for the journey! 🙌🏾
It’s great to see how much your Chanel’s growing I was here since 100subs!
Thank you so much for being a “Day 1”!!! It’s only up from here!!! 📈
“Ima lover”😂😂Helmet is fire🔥one of your best yet!!
😂😂😂 but it’s true tho 😏
You snapped bro
Thank you so much! 🙌🏾
Thank you! Very nice video and the helmet is awsome. Keep them videos coming brother.
Thank you so much! That really means a lot so thanks! 🙌🏾
thank you so much for this amazing video , it helped me a lot and you did a beutiful job . Love from germany and keep going this cool channel :)
🥹 I’m glad I was able to help and you enjoyed my video. I will do my best to keep this going!!!
“This helmet is Fire!, literally cause it‘s red”
I died with that part 😅😂 Super great helmet!
Thanks!!! I’m glad you enjoyed that!
That is 🔥🔥🔥
Thanks homie! 🙌🏾
Looks great!
Thank you so much!
Wow that is shiiiny. Great job !
Man… next time I’m going to polish it… get it extra shiny
dope looks awesome.
how did you set up your paint booth? what kind of of fan is powering the vent
Thank a lot! It's just a DIY paint booth held up with poster board and duct tape! 🤣 this is just a ventilation van from amazon. if you want a little more information you can watch my Set Up tour I posted last week.
www.amazon.com/AC-Infinity-RAXIAL-Booster-Controller/dp/B07ZPC5GTX/ref=sr_1_5_pp?crid=23P5SHH7BJYBM&keywords=ventilation+fan&qid=1699299360&sprefix=ventala%2Caps%2C104&sr=8-5
@@JustGee3DGood looking out. I'll def check out that vid
Looks awesome man! Love the content, new sub for sure!
Thank you so much!!! Welcome to the channel.
Just another question.
Between sanding, priming e painting, how long did you wait ? Was it all same day ?
Painting for sure I try and give 24 hours. Painting to clear coating. Priming to painting just about 3-6 or so hours depending how thick of a prime job I do!
@@JustGee3D thanks man !
That is sweet! I can't print anything big on my Bambu P1S. No bed adhesion problems, it just starts printing garbage hours into the print. Bummer.
Have you tried using glue sticks. Make sure you get no finger prints on the bed plate the oils causes failed prints all the time.
Dope video bro
Thank you so much ✊🏾
Thank you! I plan on being red hood for a con in 2 months. I think I have the same one!
That’s so cool l love looking at all the Red Hood cosplays that’s what inspired me to build this helmet! That and it was free stl! 😂
I’m printing the one piece file from them for my son. Right now almost half way done printing. I realize it’s going to be difficult for him to get on and off hoping I can somehow remove the rear panel without ruining the helmet.
I haven’t looked at that file before, does it already come separated?
really dig your videos.
Thank you so much, that really means a lot!
Great video 👌
Thank you so much!!! 🤜🏾🤛🏾
I'm Japanese, sorry for the translation, but I have a question. Do you set the mask to the size of your head? Or do you not set the size?
Hello and welcome to my channel, with most of my helmets, I would size them to my head! Every modeler is different when they create STLs
You made this look easy. I know if I tried to do this, I'd mess it up. Can I buy it from you?
Thank you so much!!! It’s not as easy as it looks lol, I actually no longer have this helmet I sold it, sorry
Hey I was wondering if you had to change the scale for the size of the helmet at all? Or did the file size automatically fit
I def measured my helmet using a 3D scan of my head! But I’m pretty sure this one was g2g at 100%
very nice. subscribed
Thank you so much! Welcome to the channel!
What type of printer are you using? Looks like it handles business. Solid vid btw.
I use the Elegoo Neptune 3 Plus. It's a really strong printer. and thank you for the compliment!!!
Thats what's up and you are welcome, you are definitely energetic in your video.
@@absolutedynamite4979 thank you so much! 🥲
Hey man great vid, do you think you could link the lights you used for the eyes if possible? Cheers
Hey, thank you so much for the compliment.
Yes, here is an amazon link which is the cheapest I could find:
(amazon) amzn.to/3wHFH3e
But if you don't mind waiting for shipping, you are able to get these a lot cheaper if you order from sites like Ali Express:
www.aliexpress.us/item/3256801092822609.html?spm=a2g0o.productlist.main.5.7b885939mkLUWG&algo_pvid=c47f7d7e-4ff9-4f30-8b57-2ebe9f4e42f8&algo_exp_id=c47f7d7e-4ff9-4f30-8b57-2ebe9f4e42f8-2&pdp_npi=4%40dis%21USD%212.50%211.75%21%21%212.50%211.75%21%40210318ec17090653536942475ea2f3%2112000015559723678%21sea%21US%212631394779%21&curPageLogUid=VKOtdjQxiEod&utparam-url=scene%3Asearch%7Cquery_from%3A
@@JustGee3D Absolute legend 🙌
What and how can I have those supports? I have the same printer and may I have the files ( pls respond within 3 days of me sending this ) like maybe a link I could use to get the file to download because your supports are way more simpler and conserving
The supports you saw in this video was Elegoo Cura tree supports. But they are terrible and I wouldn’t recommend it. UltiMaker Cura Tree supports are so much better and I recommend using those!
ultimaker.com/software/ultimaker-cura/
This should set you right! 👊🏾
Hey dude I really really wanna 3d print helmets and weapons, but I don’t own a 3d printer or a computer so would you recommend me some cheap 3d printers for 3d printing helmets and weapons and how to 3d print with a iPad?
You can get the printer I use for under $300 now you don’t want to go too cheap because obvious reasons. This is the Elegoo Neptune 3 Plus. Hope this helps
What happens if I copy your settings? I also have the Neptune 3 plus but I’m using the fed suit 0,4mm nozzle
I’m pretty sure you’ll be fine, but you have to remember even if we use the exact same everything, environment plays a major factor in 3d Printing. So don’t expect the same results.
I actually couldn’t get my helmet to print with regular supports. Once I did tree supports it’s printed very well lol
Tree supports come off so clean and don’t leave all that junk on the bottom. Once you get your setting dialed in you’re golden!
Whats the bondo acetone method are you using Bondo in the big can or spot putty
I use Bondo glazing spot and acetone and rub it on the print! I explain it more in this video:
ruclips.net/video/5oguoud8_mo/видео.html
Check about the 3:11 mark.
THANK YOU
No… thank you for the support!
really cool... it came out better than the one frank built did... nice !
Wow! What a compliment, that’s actually saying so much thank you!!! 🙌🏾
@@JustGee3D no no, it's true, yours is way better ! Very well done man 👍🏼👍🏼👍🏼
Man I’m blushing thank you so much! ☺️
@@JustGee3D Hey there, me again. I'm in Europe, don't seem to find the same red spray, any suggestions ?
@@PixelForgeLab HEY!!! yeah no worries, I'm pretty sure you guys carry Rest-Oleum Primer Filler, it comes in Red and Grey.
www.amazon.com/Rust-Oleum-249279-Automotive-11-Ounce-Filler/dp/B003CT4AMA/ref=sr_1_6?crid=3WDVVBVHUGLE&keywords=primer%2Bfiller&qid=1699894381&sprefix=primer%2Bfiller%2Caps%2C98&sr=8-6&th=1
thank you for the videos, what was the clear coat you used?
Thank you so much! 🙌🏾 I use automotive clear coat!
SHERWIN WILLIAMS Finish 1:
a.co/d/ahaFxji
@@JustGee3D thank you, keep up the good work!
Thanks I’ll try my best!
Waaaaw ❤❤❤❤❤❤❤
Thank you!!! 🫶🏾
Does people still Use the Rondo (resin bondo mix) techniques for smoothing prints it use to be big for pepakura .
I haven't heard too much about that method, can you tell me a little bit more about it?
Did you have to adjust yours to make it bigger or smaller to fit your head
I did! I used a 3d scan of my head to scale the helmet before I printed it
@JustGee3D are those free beacsue I think mine might just fit but I think I need it a little bigger and don't know how to do that
Some apps have free trials but the app I use is behind a paywall
@@JustGee3D do you happen yo know any good free ones
Do I need to scale it or will it fit me in its original size?
You’re prob gonna want to scale it! Even if I’m sure it will fit. I scale it anyways
Do you have your printer settings anywhere
Yes, I've have done shorts on my settings before, you can view that video right here: ruclips.net/user/shortsInWH3nbom0w
But I will be starting a Patreon shortly where you will have exclusive access to all my settings, and it will only cost $1.
JustGee3D:- Make your Red Hood mask for free!
3D Printer Costs:-Ya ! We will look after that!
Mine keeps un sticking to the plate : /
What 3D printer are you using? I used my ender 3 pro and a good tip i found is to put some gluestick on the plate where the print will be and that should help
No lie, just throw some glue stick it’s an easy fix
Yeah the glue fix it I also up the temperature bc my room is too cold
Why is it a big deal when a 3d file is free? I've never payed for any stl file.
This is a Do3D file which usually cost money. From my experience the better files usually cost money. They’re are cut up to fit smaller printer and they spend time on the details as well as implement magnet holes. Just overall better files. IMO!
Venture out of thingyverse you’ll find some incredible files that cost. You wouldn’t do your job for free so why should designers
can I Have it I Really Want in on My Life if That Happen I Will Be So Happy To The Rest of My Years
Sorry I sold this helmet a while back thanks for the interest tho!
Great informative video, thank you, subscribed
Thank you so much! Welcome to the channel