Hi Bogdan, I've been following your channel for a while now. When it was time to replace my 2001 Acura MDX (owned for 15years), your channel gave me the extra confidence to buy my preowned 2012 last Feb. As your channel grows, please consider having a meet up for all your fans in the GTA. Thank you once again!
Thanks, Shaun! I certainly have that in mind. Thanks for reminding me about it, once I'm done with this season, I might put out a survey about a meet up.
Hi Bogda, Thanks for putting very useful videos on your channel, I replaced old DRL Bulbs and put new LED bulbs, after this Check DRL System warning is coming in my MDX 2011. Is there any way I can delete/ reset this waring because DRL Lights are working fine there is no issue but this warning light on my dash board bothers me. I don't want to replace these LED bulbs and do not want to put any resister as they can become very hot and can easily damage the plastic parts. I am thinking to reset this warning light by the help of code reader and reset the error. Please advise, Thanks Sayed.
Unfortunately you won’t be able to reset or delete this. You will need to use the resistors to add the load to the circuit. You can use the plug and play ones I used in the video, links are in the description.
2008 MDX, DRL light went out on the passenger side. Bought the $9 9005 bulb from Walmart. Great video! It helped me to change out the bulb in less than 10 minutes. Keep the videos coming!
Nice video as always! Did this on my 2011 x 3 months ago same vleds resistors and up to now no error in the dash. Still have to test for a long drive with the drl on for a long time.
Thanks, Ed! Yeah, I see two thumbs down already, this is always fascinating to me when someone thumbs down an educational video. But the funny part is that it’s still good for the channel :)
Thanks Bogdan, I have replaced original DRL Bulbs with LED lights, but Check DRL System warning is comming ,can you please advise me which decoder / resister should I use. Another thing that when I drive my MDX 2001 Advance model some time from front right side (Passenger) a sound comes and goes after few second or few minutes .I does not come always. There is no warning sign on my desh board, can you please advise what the sound is and how to fix it. Thanks
Hi everyone my name is Camilo de Colombia y gracias por tu video reemplace mis luces pero no funcionaron por mucho tiempo y voy a intentar con tu ayuda. Gracias parcero
Asumiendo que estás hablando de faros: sí, puedes. Pero es posible que necesite el equipo adecuado para que funcione. Mi opinión: no vale la pena. Las bombillas LED que excederán la salida de luz de los HID cuestan mucho más. Simplemente obtenga bombillas HID de alta calidad: es mucho más barato y fácil. Tengo un video sobre eso: ruclips.net/video/gk69HRLbfSs/видео.html
Спасибо! Резисторы найти и поставить нужно бы, да вот хоть эти закажи, они 25 долларов за комплект стоят, и ковырять ничего не нужно, просто в разрыв цепи поставил и всё.
Спс за видос . В каждом видео поражаюсь как 10 летняя машина чисто выглядит по днищу или вот в бампере. Впечатление , что у вас вообще нет зимы илиидождя . Все чистое
Пожалуйста! На самом деле здесь климат очень переменчивый, и достаточно часто идут дожди, плюс влажность, а зимой - снег и тонны соли. Так что это действительно поразительно, что под днищем относительно чисто.
@@AcuraAddicted та мне трудно сказать , немного в центре погуляли, красиво, но сравнивать с др городами не могу) красиво что много причалов, яхты, лайнеры всякие ,
@@AcuraAddicted а не подскажите новичку акуроводу, только купил машину, кроме жиж ремней и роликов, стоит ли менять помпу с термостатом и как на счёт масляного насоса. До этого была Субару там это все обычно скопом меняли , здесь не уверен как поступить .
While both bulbs I've used have been discontinued by VLEDs, you can still buy the resistors using the link in the description. It will work for any LED bulbs for this application.
Thanks! This means one or more of your sensors have run out of battery. Does it show the pressure on all four wheels? It usually shows a blank on the wheel(s) with depleted battery. There is no resetting this, you gotta buy a new sensor.
I was able to successfully swap out my DRL with this video. Thank you! Not sure I will do it again tho, as I scraped up my forearm and some how created small cracks in the bumper near the bottom screw hole, keeping the screw from staying in the hole lol al- but that was my fault. Any ideas on how to patch that up?
I replaced one of the fog lights on my acura mdx because it wasn't working but it still didn't work. Im guessing the fuse for the foglight needs to be changed?
@@AcuraAddicted hi， glad you responded, I was able to get to the part where to unplug the fog light counterclockwise, but seems important the light bulbs won’t come out , Also the plug won’t disconnect, will you find me a video how to remove the difference bulbs from their plugs , thanks
Can you help me please my drl keep come on and off I have one high bean light not working the bulb is good I can't find the relay for can you tell me where it is please I have 2005 mdx
Sorry, not much of a helper with the first gen. Do you have the owner’s manual? Relays and fuses should be mentioned there. If you don’t have a hard copy, look up “2005 Acura MDX manual pdf” in Google and use Acura/Honda links. Good luck!
@@AcuraAddicted resisters also can get hot ? Another thing that when I drive my MDX 2001 Advance model some time from front right side (Passenger) a sound comes and goes after few second or few minutes .I does not come always. There is no warning sign on my desh board, can you please advise what the sound is and how to fix it.
Bogden: Do you know where the turn signal relay is located, and weather or not it is simply and unplug and plug in fix? Thanks. Todd Williams 2007, 8 and 9 Acura MDX
Yes, it's very easy to replace. Start watching here: ruclips.net/video/aZRB1A1aIpY/видео.html on how to get to it. And here: ruclips.net/video/aZRB1A1aIpY/видео.html it's a big grey rectangular vertical box in the very right upper corner.
Hi, The DRL LED Bulb you linked no longer works, can I use any random brand 9005 LED bulb and use your linked resistor/splitter to work on my 2012 mdx? thanks!
Yeah, unfortunately they no longer sell these. They have others, but the price is exorbitant. The resistor/splitter would work on other LED bulbs, though.
When you upgrade your lights, did your acura display DRL system failure? I replace my fog lights and my DRL’s and now i like my lights but i continue to get the error on my dashboard
No, it did not. I had a burnt out fog light, which does not result in a DRL issue. Fog lights do not affect the DRL system in any way. If you replaced DRLs and you have a warning, this most likely means you put LED DRLs without resistors. If you watch my entire video, it will be explained there.
Goo day. I was interested in the DLR light setup. Unfortunately, the dulb site is down. Do you have anoth.er recommendation for light that don't trigger the dash warning? I had gotten a set of "Fahren" for my fog lights which work great. The H9005 with resistors do not work on DRL's?
Hello. www.vleds.com is not working for you? Just tried it and it works. I don’t have another recommendation as I’m only recommending things I’ve either tried myself, or someone else I trust.
Bogdan!!! Do you know of anyway to get switchbacks into the turn signal housings on a 2008 mdx? Or how ti make the amber turn sigbal stay in solid till i turn on flash
@@AcuraAddicted is there a particular brand you know of that sells good switchbacks that could work for Acura Mdx? Is it simple as plug and play plus a little wiring ti avoid hyper flash
I have successfully used leds from VLEDs.com for all my led needs. Check them out, they might have the switchbacks. It’s not going to be cheap, though.
@@AcuraAddicted The DRL you recommended are no longer there. But they do have a set with the resister and splitter. I ended up purscahing them. A bit pricey but they have 2 years warranty. Hopefully they hold up.
Its says micro limited high beam low volage DRL 9005 HB3 and it includes error cannceller resister and canceller harness resister splitter. Will this work???
If I am not mistaken, it seems these can be used for both the high beam and DRL and they will auto adjust.. DRL Mode Designed specifically for low voltage DRL/High Beam applications. With its smart voltage sensing circuitry, the Micro Limited DRL bulb will dim the output to 800LM when the DRL is active (below 10V constant). Once the high beam is active (12V-14.4V) the full 2500LM output is achieved for a fully functioning high beam. This is the first dual-output LED headlight of its kind!
Hi Patreon I followed Your video to the letter. I replaced my daytime running lights with LEDs. I used the resistor kit and the driver side doesn't come on. Only the passenger side . Before I purchased the kit they were both on. Now it's just the passenger side by adding the kit. Need help bro.
Hi! Have you tried installing the bulb that worked before to the driver’s side? If that still works, something is wrong with the LED bulb or resistor. Does the DRL error message appear on the dashboard?
@@AcuraAddicted yes the DRL comes back up on the dashboard. The LEDs bulb are good .just bought it a month ago. It was working before I put in the resistor. A little weird.
@@AcuraAddicted Hi Patreon i took out the resistor out and tried the drl led back in it worked. I decided to swop the resistors from driver side to passenger and etc. It worked just fine. I guess if one of the lights are out after installing the resistor. Swop them and both lights came on . The dashboard DRL warning is off. Thanks Patreon for taking the time out to help me with this problem. Keep putting out those awesome videos.
Unfortunately the kit I used from vleds.com seems to be no longer available. It’s really hard for me to recommend something I haven’t tried. Perhaps looking up on mdxers.org would yield some results.
First, you need to make sure your fog lights actually work. If both of them did not work before you switched them to LEDs, you likely have electrical issues, as it is unlikely that both bulbs would go off at the same time. If you had at least one fog light working and it's no longer working after you switched them to LEDs, it might be the LED bulb issue, or resistor issue, or contact issue, for example. Do your new LED DRLs work?
Not sure what the purpose would be. It's not an off-road SUV. If you are planning to use it somewhere where the current clearance is not enough, you probably shouldn't use it there.
I wouldn't do it for two main reasons: 1) MDX is quite stiff even on 18". Driving it on 20" tires would be horrible. 2) These are extremely wide, it's likely they will be rubbing the wheel wells.
Hello Bogdan, am a big fan of your series, am using Acura MDX 2008 I want to change the differential fluid but I can't find the new Acura recommended fluid because am staying in Singapore, can Honda or Toyota differential work on mine, or any other product option cuz can't find Acura recommended online here
Hello Charles, thanks! Honda fluid is different, and while some say it’s ok to use in SH-AWD, you have to understand that it’s different and might not be good for the differentiatial. If you are having trouble finding it online, I’m willing to buy and ship it to you at nominal cost. I’m not sure what the shipping fees would be from Canada, but I can find out.
Been following your channel for a while now, keep up the great work with the very informative videos. Although I have a question..how would I be able to replace the entire fog light assembly? because my assembly is cracked and want to replace it. Thanks!
Thanks, Besim! Good question. You can't see on my video, but my right one is also cracked a bit. Yes, you can replace it. I'm pretty sure you would have to take the bumper off for it, although there might be a way to do it through the fender with enough dexterity. The OEM housing is a bit pricey ($200 each), but you can get aftermarket ones for almost half the price on Rockauto, for example.
Why does nobody mention in these videos that getting your hand on the DRL light is a painful process. I'm a skinny guy with skinny arms and I nearly cut my arm open trying to get the bulb out. There is sharp metal edge that can't be moved. I failed unfortunately. The bulb is just way too tight for the kind of leverage I can manage to get. My arm is totally raw now.
@@AcuraAddicted I finally managed to get the bulb out after the swelling in my arm went down and I tried again. The bulb was in so tight that my arm muscles flexed and pressed against the sharp metal edges. All in all, still beats paying the mechanic an hour of labor that he wanted.
Слишком много балтавни. Извини. Благодарю за старания, но я не смог смотреть. Люди смотрят видео чтоб быстро решить проблему а не тратить время на выслушивание.... Удачи!
Hi Bogdan, I've been following your channel for a while now. When it was time to replace my 2001 Acura MDX (owned for 15years), your channel gave me the extra confidence to buy my preowned 2012 last Feb. As your channel grows, please consider having a meet up for all your fans in the GTA. Thank you once again!
Thanks, Shaun! I certainly have that in mind. Thanks for reminding me about it, once I'm done with this season, I might put out a survey about a meet up.
Hi Bogda,
Thanks for putting very useful videos on your channel, I replaced old DRL Bulbs and put new LED bulbs, after this Check DRL System warning is coming in my MDX 2011.
Is there any way I can delete/ reset this waring because DRL Lights are working fine there is no issue but this warning light on my dash board bothers me. I don't want to replace these LED bulbs and do not want to put any resister as they can become very hot and can easily damage the plastic parts.
I am thinking to reset this warning light by the help of code reader and reset the error.
Please advise,
Thanks
Sayed.
Unfortunately you won’t be able to reset or delete this. You will need to use the resistors to add the load to the circuit. You can use the plug and play ones I used in the video, links are in the description.
2008 MDX, DRL light went out on the passenger side. Bought the $9 9005 bulb from Walmart. Great video! It helped me to change out the bulb in less than 10 minutes. Keep the videos coming!
Thanks, Jessie! Glad it helped!
Nice video as always! Did this on my 2011 x 3 months ago same vleds resistors and up to now no error in the dash. Still have to test for a long drive with the drl on for a long time.
Thanks! A bit pricey, but I hope they last a long time.
Good job on the video! 👍 Why this video would get a thumbs down doesn't make sense because it says what the video is about. Good job as always Bogdan
Thanks, Ed! Yeah, I see two thumbs down already, this is always fascinating to me when someone thumbs down an educational video. But the funny part is that it’s still good for the channel :)
@@AcuraAddicted I guess a person watching it is always a plus
@@edde333 Exactly!
Great video. Clear and concise information as always. I thought LEDs burn at a lower temperature compared to halogens, your videos are so informative!
Thank you!
Thanks Bogdan, I have replaced original DRL Bulbs with LED lights, but Check DRL System warning is comming ,can you please advise me which decoder / resister should I use.
Another thing that when I drive my MDX 2001 Advance model some time from front right side (Passenger) a sound comes and goes after few second or few minutes .I does not come always. There is no warning sign on my desh board, can you please advise what the sound is and how to fix it.
Thanks
Thank you for your help. Very clear, professional and easy to follow video.
Thanks for your feedback!
Very clear and detailed explanation..!!
Thank you!
Безупречная, блистательная работа! Нужная и абсолютно понятная людям, которые подписываются на твой канал.👍✌👏👏👏
Спасибо!
Hi everyone my name is Camilo de Colombia y gracias por tu video reemplace mis luces pero no funcionaron por mucho tiempo y voy a intentar con tu ayuda.
Gracias parcero
You rock man. I really appreciate your videos. you make everything cleAr and easy
Thanks!
Puedo cambiar los bulbos xenón por leds? En acura mdx 2009. Se pueden conectar solo desconectando la balastra.?
Asumiendo que estás hablando de faros: sí, puedes. Pero es posible que necesite el equipo adecuado para que funcione. Mi opinión: no vale la pena. Las bombillas LED que excederán la salida de luz de los HID cuestan mucho más. Simplemente obtenga bombillas HID de alta calidad: es mucho más barato y fácil. Tengo un video sobre eso: ruclips.net/video/gk69HRLbfSs/видео.html
@@AcuraAddicted gracias saludos
Круто, огромная робота по сьёмке. Поставил ксенон в туманки и ДХО светит на ура. Только Check DRL Sistem теперь...
Спасибо! Резисторы найти и поставить нужно бы, да вот хоть эти закажи, они 25 долларов за комплект стоят, и ковырять ничего не нужно, просто в разрыв цепи поставил и всё.
Buenas tardes I from México, mi acura 2008, no enciende la luz diurna, ya revise los fusibles están buenos, que más puedo revisar? Gracias 👍
Hello. Did you check the bulbs themselves?
Спс за видос . В каждом видео поражаюсь как 10 летняя машина чисто выглядит по днищу или вот в бампере. Впечатление , что у вас вообще нет зимы илиидождя . Все чистое
Пожалуйста! На самом деле здесь климат очень переменчивый, и достаточно часто идут дожди, плюс влажность, а зимой - снег и тонны соли. Так что это действительно поразительно, что под днищем относительно чисто.
@@AcuraAddicted ну я щас в Бостоне в командировке, это конечно, не Канада , но тож погода быстро меняется и дождливо .
@@FF-yu9lb Говорят, в Бостоне красиво. Не бывал там ещё.
@@AcuraAddicted та мне трудно сказать , немного в центре погуляли, красиво, но сравнивать с др городами не могу) красиво что много причалов, яхты, лайнеры всякие ,
@@AcuraAddicted а не подскажите новичку акуроводу, только купил машину, кроме жиж ремней и роликов, стоит ли менять помпу с термостатом и как на счёт масляного насоса. До этого была Субару там это все обычно скопом меняли , здесь не уверен как поступить .
I can’t get fog light out!!
That's a good color match. I've had some led headlight bulbs in my TL foglights for over 2 years, no melting yet lol.
I’m looking to replace the front struts which brand do you recommend thanks
OEM only if you want a good quality long lasting solution. Monroe or any other crap if you need a crappy solution for 10-12 months.
Is there a tour something to use. Because it’s so tight they won’t come out.
You'll probably need to remove the bumper then.
Which would do what?
Can I get a link to where to find the exact bulbs? I want to make sure I buy the correct DRL resistor system
While both bulbs I've used have been discontinued by VLEDs, you can still buy the resistors using the link in the description. It will work for any LED bulbs for this application.
@@rachelstarling4725 That is correct. As I said above, both bulb types have been disconinued. The resistors link works, though.
Got it. Are the DRL bulbs and fogs same bulb?
No, they are different bulbs
Nice vid how do you reset the tpms on a 2008 Acura mdx? My tire pressure is good but the light still on
Thanks! This means one or more of your sensors have run out of battery. Does it show the pressure on all four wheels? It usually shows a blank on the wheel(s) with depleted battery. There is no resetting this, you gotta buy a new sensor.
I was able to successfully swap out my DRL with this video. Thank you! Not sure I will do it again tho, as I scraped up my forearm and some how created small cracks in the bumper near the bottom screw hole, keeping the screw from staying in the hole lol al- but that was my fault. Any ideas on how to patch that up?
It’s a plastic bumper, so epoxy or a similar material.
I replaced one of the fog lights on my acura mdx because it wasn't working but it still didn't work. Im guessing the fuse for the foglight needs to be changed?
Hi Barry. A burnt fuse would result both of them not working. You might have a wiring issue.
I switched DRL to LED bulbs and am now getting the message check drl system in the instrument panel. Any suggestions?
Yes. You did not install the resistors as outlined in the video.
Yo da man! Thank you
Hi there, I would like to ask how the housing and bulbs are holding up? Thanks
Holding up just fine for now.
Do you think is easy if you remove the front tire ? Even is more work but you get much more room to work
Yes, it would definitely be easier. But not necessary.
@@AcuraAddicted hi， glad you responded, I was able to get to the part where to unplug the fog light counterclockwise, but seems important the light bulbs won’t come out , Also the plug won’t disconnect, will you find me a video how to remove the difference bulbs from their plugs , thanks
On the passenger side, should I still turn the socket COUNTER clockwise to release it?
Yes, regardless of the side it’s the same
Amazing Video. Thank you so much. Do you remember how many lumens your fogs are? They have three different levels of brightness.
Thanks! I think they were 800lm
I forgot to mention that your channel is very informative. The video shots are clean. What equipment are you using?
Thanks! Panasonic GH-5 camera with Go-Pro Hero 7.
Worked like a charm
What brands are the LED lights you used?
VLEDS.com
Can you help me please my drl keep come on and off I have one high bean light not working the bulb is good I can't find the relay for can you tell me where it is please I have 2005 mdx
Or what do you think it is
Sorry, not much of a helper with the first gen. Do you have the owner’s manual? Relays and fuses should be mentioned there. If you don’t have a hard copy, look up “2005 Acura MDX manual pdf” in Google and use Acura/Honda links. Good luck!
Hi Bogdan, can I DELETE or reset the DRL waning light after I replaced the LED bulbs in my daytime sockets.
please advise
Hi Syed. No, you will need to add resistors as outlined in the video.
@@AcuraAddicted resisters also can get hot ?
Another thing that when I drive my MDX 2001 Advance model some time from front right side (Passenger) a sound comes and goes after few second or few minutes .I does not come always. There is no warning sign on my desh board, can you please advise what the sound is and how to fix it.
Haw much you charge to change fog lights I will buy
I don't do commercial work, sorry.
Bogden:
Do you know where the turn signal relay is located, and weather or not it is simply and unplug and plug in fix?
Thanks.
Todd Williams
2007, 8 and 9 Acura MDX
Yes, it's very easy to replace. Start watching here: ruclips.net/video/aZRB1A1aIpY/видео.html on how to get to it. And here: ruclips.net/video/aZRB1A1aIpY/видео.html it's a big grey rectangular vertical box in the very right upper corner.
Hi, The DRL LED Bulb you linked no longer works, can I use any random brand 9005 LED bulb and use your linked resistor/splitter to work on my 2012 mdx? thanks!
Yeah, unfortunately they no longer sell these. They have others, but the price is exorbitant. The resistor/splitter would work on other LED bulbs, though.
When you upgrade your lights, did your acura display DRL system failure? I replace my fog lights and my DRL’s and now i like my lights but i continue to get the error on my dashboard
No, it did not. I had a burnt out fog light, which does not result in a DRL issue. Fog lights do not affect the DRL system in any way. If you replaced DRLs and you have a warning, this most likely means you put LED DRLs without resistors. If you watch my entire video, it will be explained there.
@@AcuraAddicted what size sockets did you use to level and adjust the lights
I did not level and adjust the lights as I have no need for that.
Goo day. I was interested in the DLR light setup. Unfortunately, the dulb site is down. Do you have anoth.er recommendation for light that don't trigger the dash warning? I had gotten a set of "Fahren" for my fog lights which work great. The H9005 with resistors do not work on DRL's?
Hello. www.vleds.com is not working for you? Just tried it and it works. I don’t have another recommendation as I’m only recommending things I’ve either tried myself, or someone else I trust.
Thank you so much for this video
You're welcome!
Thank you👍
Have a good day
Thanks!
What does does drive mode mean ? An d mean ?
I’m not sure what you are asking about.
@@AcuraAddicted the car have 2 drive modes wat are they ?
Bogdan!!! Do you know of anyway to get switchbacks into the turn signal housings on a 2008 mdx? Or how ti make the amber turn sigbal stay in solid till i turn on flash
Yeah, it’s pretty straightforward, just replace the turn signal bulb with the switchback led and add the circuitry accordingly.
@@AcuraAddicted is there a particular brand you know of that sells good switchbacks that could work for Acura Mdx? Is it simple as plug and play plus a little wiring ti avoid hyper flash
I have successfully used leds from VLEDs.com for all my led needs. Check them out, they might have the switchbacks. It’s not going to be cheap, though.
is the same way on 2014 Acura rdx?
Sorry, I have no idea, haven't worked on RDX, so I don't know if you can reach the bulbs from there.
How have the bulbs done over time?
They're holding up great so far.
@@AcuraAddicted The DRL you recommended are no longer there. But they do have a set with the resister and splitter. I ended up purscahing them. A bit pricey but they have 2 years warranty. Hopefully they hold up.
Its says micro limited high beam low volage DRL 9005 HB3 and it includes error cannceller resister and canceller harness resister splitter. Will this work???
If I am not mistaken, it seems these can be used for both the high beam and DRL and they will auto adjust..
DRL Mode Designed specifically for low voltage DRL/High Beam applications. With its smart voltage sensing circuitry, the Micro Limited DRL bulb will dim the output to 800LM when the DRL is active (below 10V constant). Once the high beam is active (12V-14.4V) the full 2500LM output is achieved for a fully functioning high beam. This is the first dual-output LED headlight of its kind!
Are the H11 bulb size correct for fog lights? I have a 2011 MDX
Yes
Hi Patreon I followed Your video to the letter. I replaced my daytime running lights with LEDs. I used the resistor kit and the driver side doesn't come on. Only the passenger side . Before I purchased the kit they were both on. Now it's just the passenger side by adding the kit. Need help bro.
Hi! Have you tried installing the bulb that worked before to the driver’s side? If that still works, something is wrong with the LED bulb or resistor. Does the DRL error message appear on the dashboard?
@@AcuraAddicted yes the DRL comes back up on the dashboard. The LEDs bulb are good .just bought it a month ago. It was working before I put in the resistor. A little weird.
@@MrRocky1217 It's probably the resistor issue then. May be, there's a loose wire.
@@AcuraAddicted Hi Patreon i took out the resistor out and tried the drl led back in it worked. I decided to swop the resistors from driver side to passenger and etc. It worked just fine. I guess if one of the lights are out after installing the resistor. Swop them and both lights came on . The dashboard DRL warning is off. Thanks Patreon for taking the time out to help me with this problem. Keep putting out those awesome videos.
@@MrRocky1217 Interesting! I'm glad you worked it out!
Thanks.. again
What fog lights kit do u recommend? Where can I purchase them
Unfortunately the kit I used from vleds.com seems to be no longer available. It’s really hard for me to recommend something I haven’t tried. Perhaps looking up on mdxers.org would yield some results.
Can you demonstrate how to replace the small light bulbs just above the headlights?? I don’t even know the name of these lights lol I have a 10 MDX
I can’t demonstrate, but it should be very simple, those are easily accessible, just watch my low beam bulbs replacement video to get an idea.
I did this with the same bulb and it doesn’t turn the fog lights on what should i do ???
First, you need to make sure your fog lights actually work. If both of them did not work before you switched them to LEDs, you likely have electrical issues, as it is unlikely that both bulbs would go off at the same time. If you had at least one fog light working and it's no longer working after you switched them to LEDs, it might be the LED bulb issue, or resistor issue, or contact issue, for example. Do your new LED DRLs work?
Do you recommend a Lift for the mdx
Not sure what the purpose would be. It's not an off-road SUV. If you are planning to use it somewhere where the current clearance is not enough, you probably shouldn't use it there.
Will 295/40/20 size tires fit the 2008 MDX?
I wouldn't do it for two main reasons: 1) MDX is quite stiff even on 18". Driving it on 20" tires would be horrible. 2) These are extremely wide, it's likely they will be rubbing the wheel wells.
What LED you prefer ?
Good quality LEDs. I got mine from VLEDs. But I hear they no longer sell them.
Hello Bogdan, am a big fan of your series, am using Acura MDX 2008 I want to change the differential fluid but I can't find the new Acura recommended fluid because am staying in Singapore, can Honda or Toyota differential work on mine, or any other product option cuz can't find Acura recommended online here
Hello Charles, thanks! Honda fluid is different, and while some say it’s ok to use in SH-AWD, you have to understand that it’s different and might not be good for the differentiatial. If you are having trouble finding it online, I’m willing to buy and ship it to you at nominal cost. I’m not sure what the shipping fees would be from Canada, but I can find out.
@@AcuraAddicted thank you so much for reaching out, my email address is charlessnow007@gmail.com once you find out the cost kindly update me
Been following your channel for a while now, keep up the great work with the very informative videos. Although I have a question..how would I be able to replace the entire fog light assembly? because my assembly is cracked and want to replace it. Thanks!
Thanks, Besim! Good question. You can't see on my video, but my right one is also cracked a bit. Yes, you can replace it. I'm pretty sure you would have to take the bumper off for it, although there might be a way to do it through the fender with enough dexterity. The OEM housing is a bit pricey ($200 each), but you can get aftermarket ones for almost half the price on Rockauto, for example.
Acura Addicted awesome! Thanks for the reply back! Will try to eventually change out the entire assembly soon.
Besim/ Acura Addict did you guys ever get to take out the entire fog light assembly yet? Did you need to remove the whole bumper? Thanks
@@MVVR30 I haven't gotten to it yet.
Can we replace the lens or is the lens purchased in the whole assembly?
I replaced the bulb to led wgites and everything is on and works but on the dash it say check drl system anyone know how to fix rhat
Yes - you need a resistor, just like the one I installed in this video.
Молодец ,хорошо на английском говоришь !
Thanks for showing
You're welcome!
Я вот тоже хочу воткнуть в противотуманки диодные светильники, боюсь только как бы машина не сгорела
Они не греются сильно там. Два с половиной года полёт нормальный.
I have touren wheels as well
Nice!
Why does nobody mention in these videos that getting your hand on the DRL light is a painful process. I'm a skinny guy with skinny arms and I nearly cut my arm open trying to get the bulb out. There is sharp metal edge that can't be moved. I failed unfortunately. The bulb is just way too tight for the kind of leverage I can manage to get. My arm is totally raw now.
I have no idea, I haven't experienced anything that you described. It was just a bit of an awkward position for me at best.
@@AcuraAddicted I finally managed to get the bulb out after the swelling in my arm went down and I tried again. The bulb was in so tight that my arm muscles flexed and pressed against the sharp metal edges. All in all, still beats paying the mechanic an hour of labor that he wanted.
Cool !
Спасибо!
Epic.
Thank!
👍👍👍
Слишком много балтавни. Извини. Благодарю за старания, но я не смог смотреть. Люди смотрят видео чтоб быстро решить проблему а не тратить время на выслушивание.... Удачи!
Прощаю! Здесь никто силой не держит. Удачи во всех начинаниях!