can you help me? my problem is that when ich choose the novusun plugin during the start of mach3 , the motortuning will not running an an error accures the software and the the software ist not running.
Make a folder in the plugins Mach3 folder named OFF. Move all Novusun drivers to the off folder. Restart mach3 make all changes and save. Then pull out the drivers from the off folder and drop them back into the plugins folder. It isn't a pretty solution but it works.
Did you ever get the servos working? Found out my jmc servos will not work without a firmware debugging tool to calibrate them. The download isn’t available anywhere atm.
Здравствуйте! У вас брали этот контроллер, но он имеет множество проблем: таких как невозврат домой, выход за пределы допустимого, не работают soft limits, частые зависания и другие проблемы. Пришлите ссылку на обновлённый и исправленный файл Novusun.dll.
I have massive problems with the G31 command and the NVEM V2 controller. The controller will not stop the movement in 50% of the cases when probe ist triggered. Do you have a suggestion to fix this.
I'm struggling with the index, I can't seem to get it to light up. If I short it with another input it will but otherwise I can't seem to trip it. I tried using port 1 and pin 0 and nothing. It detects rpm, but that doesn't help for indexing lol. Any ideas?
good afternoon my friend what is the difference of this NVUM controller for the other models which would be the advantages could help me pos i will assemble a cnc milling machine and wanted to know which would be the best choice for the controller.
The device is only delivered with a compiled driver dll for Mach3. I have not found any source code or programming specification on www.nvcnc.net/nvem.html.
Hi, the output ports can not trigger a relay by it self. You can think of the output port as a digital switch, that can enable a relay by using an external power source.
i would imagine that running this via a powerline cable adapter and via a switch and a pfsense firewall would work, instead of direct ethernet cable pc->stepper?
Thanks for the video. One question what makes mach3 connect enable 1 to th X axis? I do not understand how to assign it to a specific axis. I am getting the same JMC servo (200w version) and from the diagram I see you need to connect an enable signal for each axis. If you activate 3 enable outputs, how Mach3 assign them to the axis? Are the Enable signal always the same so if you have 3 activatede will be the same signal across whole of them? Thanks
The enable don't has to be connected. It is needed if the machine has to be enabled after switching the power on. In this case the enable signal loop's to the servos, so a fault or power loss can prevent the enable state of the machine. Most mach3 machines are enabled by default after reset.
Hi how are you? I'm having problems installing this controller, when I add the Novusun plugin in the C:\Mach3\PlugIns folder, Mach3 doesn't accept commands on XYZ axes. Could you provide the Novusun.dll plugin that mr. are you using?
This is a Mach3 only controller with stepper engine. The NVEM is ethernet connected. There is the NVUM verion for USB to. 12 input and 10 output signals including spindle, e-stop and length sensor. I have the 4-axis version of this product (www.nvcnc.net/nvem.html ).
Do you check RUclips? Did you ever get yours working? I’ve had my servos a year and still can’t get them working. Apparently they require a special firmware tool and rs232 adapter of some type. Nobody anywhere says how to do it or where to download the software. Anyone want to buy 3 servos for $200? That’s half price.
You can get the Software for tuning on seller sites like JMC-Konfigurationssoftware V1.7.6 (Firmware V600-V603) The site is in German. USB to RS232 adapter you can finde almost everywhere you can by a computer. To connect the Servo you will have to make a Plug with wires to the terminals on the Servo. You can ask your seller for the document to the servos or go to the manufacturer www.jmc-motor.com/file/1806082788.pdf. There you find out how to wire the RS232 Plug on page 13 chapter 6.4.
would really like to see a video of hooking up the 3-10 outputs to relays cant seem to get it to work, and alot ofh other people too. and mice video by the way
Heya anyone who can help, I just recently wired up the newly created electronics package with the NVEM NOVUS however i've hit an impasse. All of my motors work. My configuration uses 4 motors, X axis is controlled by two motors. After I "slaved"the secondary motor to the "A"connection, the axis only moves one direction. It never switches when I press to go left or right - just moves the same direction. All the others run well in both directions perfectly. Have you had this problem? Any idea what may be a cause? Thank you in advance!
@@Rudysbluesguitars thanks for the suggestion, I'll take a look and see what happens. Would you mind sharing your values for the dual motor drive set up? Does it work fine with your NOVUS?
Hello! This controller was taken from you, but it has a lot of problems: such as not returning home, out of tolerance, soft limits not working, frequent freezes and other problems. Send a link to the updated and corrected file Novusun.dll.
Quite easy to do what you explain. The real deal is when you try to use this board in real world. Have try to do some Zeroing of your axis with this board? None of script work. Like the board doesn't do what you expect. Please share some just simple script of zeroing the Z. Should be this hard to do simple thing like that but it is . I think the firmware is not compatible at all with Mach3.
Hello, I am thinking of using a DC Motor Spindle. I want to use NVBDL+ as the Spindle Driver and NVEM as the CNC Breakout Board. I want to control the Spindle Speed with PWM. What is the appropriate connection between NVBDL+ and NVEM?
hello, thank you for your nice video!!! I have the problem that I can't setup the Velocity in the motor tuning setup it always jumps back to zero. My Y Axis value is only for 0 to 1 and I can't set it to a higher value. Can you help me? Thank you!
So I have to say, this NVEM Novus is full of mysteries. I'm beginning to think its a huge piece of wasted money. So I connected all drives, everything 100% certain correctly wired. My X axis with a slaved motor (Dual drive) would only move one direction (either arrow key drives it the same direction). So I took Y and Z drives, and wired them to the X dual drive - the X drive would work perfectly (Moves both directions depending on the key pressed). Now, I wired an additional motor - Y - it moves only 1 direction now. Did the same thing with Z - moves only one direction. I have no idea what this means but if anyone has an idea please let me know. Otherwise, I'm just buying a smoothieboard and let this be my last mistake when buying garbage with terrible information.
Hello, I am Maurizio from Italy, I used 2 Novusum for my cnc, by ethernet card, every think OK, I use inverter Mitshibishi 700/220 and work very well no others problem finded
Hallo!!! Super Video!!! Ich habe aber trotzdem Probleme!!!!, Gemacht habe ich wie du, aber motor X,Y,Z sind tot!!!!. Ich habe 2 nema 24 motoren für x,y und nema 34 für Z, Habe nvem und nvum ausprobiert, die wollen einfach nicht drehen!!!! Und mein MPG MIT BILDSCHIRM leuchtet aber auch ohne Funktion!!! Bitte, bitte ,bitte ich habe keine Ahnung!!!!! Wer weißt besser, ist herzliche willkommen
![Как устроены швейные машинки? [Veritasium]](/img/1.gif)
The firewall tip was golden! My NVEM did not make contact. I tried everything, even reinstalled mach (noob). Thanks.
very very no doubt! :)) save a lot of money
can you help me? my problem is that when ich choose the novusun plugin during the start of mach3 , the motortuning will not running an an error accures the software and the the software ist not running.
Make a folder in the plugins Mach3 folder named OFF. Move all Novusun drivers to the off folder. Restart mach3 make all changes and save. Then pull out the drivers from the off folder and drop them back into the plugins folder. It isn't a pretty solution but it works.
Did you ever get the servos working? Found out my jmc servos will not work without a firmware debugging tool to calibrate them. The download isn’t available anywhere atm.
Здравствуйте! У вас брали этот контроллер, но он имеет множество проблем: таких как невозврат домой, выход за пределы допустимого, не работают soft limits, частые зависания и другие проблемы. Пришлите ссылку на обновлённый и исправленный файл Novusun.dll.
I have massive problems with the G31 command and the NVEM V2 controller. The controller will not stop the movement in 50% of the cases when probe ist triggered. Do you have a suggestion to fix this.
what is index, pin and port number, thank you. " the information sheet says port 1, pin 0 but it's not correct "
I'm struggling with the index, I can't seem to get it to light up. If I short it with another input it will but otherwise I can't seem to trip it. I tried using port 1 and pin 0 and nothing. It detects rpm, but that doesn't help for indexing lol. Any ideas?
As far as i know the index is only for rpm display. The manual doesn't tell anything else.
good afternoon my friend what is the difference of this NVUM controller for the other models which would be the advantages could help me pos i will assemble a cnc milling machine and wanted to know which would be the best choice for the controller.
Hi, the NVUM is connected via USB, NVEM is the Ethernet version. Other versions have different wiring options and other pulse rates.
@@Rudysbluesguitars
In your opinion which would be the best cnc controlar
Could you give me one please.
device not ready.sometimes works sometimes lost comunications and motors lost control
nvum i choose bin, can i fix it?
Can it be used for 6 axis robotic arms?
Can I use this card WITHOUT Mack3, writing my ow app using Visual Studio C# ??
The device is only delivered with a compiled driver dll for Mach3. I have not found any source code or programming specification on www.nvcnc.net/nvem.html.
. Sir please can you let me know to enable output ports in nvum V2 bcz it's cannot trig my relay 12v bcz the output amp is 250ma max
Hi, the output ports can not trigger a relay by it self. You can think of the output port as a digital switch, that can enable a relay by using an external power source.
i would imagine that running this via a powerline cable adapter and via a switch and a pfsense firewall would work, instead of direct ethernet cable pc->stepper?
Thanks for the video. One question what makes mach3 connect enable 1 to th X axis? I do not understand how to assign it to a specific axis. I am getting the same JMC servo (200w version) and from the diagram I see you need to connect an enable signal for each axis. If you activate 3 enable outputs, how Mach3 assign them to the axis? Are the Enable signal always the same so if you have 3 activatede will be the same signal across whole of them? Thanks
The enable don't has to be connected. It is needed if the machine has to be enabled after switching the power on. In this case the enable signal loop's to the servos, so a fault or power loss can prevent the enable state of the machine. Most mach3 machines are enabled by default after reset.
@@Rudysbluesguitars Thanks a lot! Indeed I am not using it with my current motors, but your explanation makes a lot of sense. Thanks again
Those wire labels though.
Thanks for the video. How you have connect the output? Do you have schematic?
Hi how are you?
I'm having problems installing this controller, when I add the Novusun plugin in the C:\Mach3\PlugIns folder, Mach3 doesn't accept commands on XYZ axes. Could you provide the Novusun.dll plugin that mr. are you using?
do you have email
@@TouChA0 RUclips does not allow you to write the email. On my RUclips page, in the about tab, there are my contacts. Thanks for your help
@@Wellinton-Impressao-3D check your email and if you want to know about cnc genre follow this channel
corvette guy 50
@@Wellinton-Impressao-3D check your email
@@Wellinton-Impressao-3D check your email
Does this come with a smooth stepper built into the board? Also are smooth steppers and CNC control boards the same thing?
This is a Mach3 only controller with stepper engine. The NVEM is ethernet connected. There is the NVUM verion for USB to. 12 input and 10 output signals including spindle, e-stop and length sensor. I have the 4-axis version of this product (www.nvcnc.net/nvem.html ).
Essa controladora tem entrada para encoder incremental
Hi! is this Novusun board is suitable for plasma cutter?
It is only for Mach3. I don't know the spezial needs for plasma cutter on IO ports, but Mach3 should support plasma cutters.
Perfeito! Ajudou um brasileiro!!
Do you check RUclips? Did you ever get yours working? I’ve had my servos a year and still can’t get them working. Apparently they require a special firmware tool and rs232 adapter of some type. Nobody anywhere says how to do it or where to download the software. Anyone want to buy 3 servos for $200? That’s half price.
You can get the Software for tuning on seller sites like JMC-Konfigurationssoftware V1.7.6 (Firmware V600-V603) The site is in German. USB to RS232 adapter you can finde almost everywhere you can by a computer. To connect the Servo you will have to make a Plug with wires to the terminals on the Servo. You can ask your seller for the document to the servos or go to the manufacturer www.jmc-motor.com/file/1806082788.pdf. There you find out how to wire the RS232 Plug on page 13 chapter 6.4.
this board works on 64 bit
would really like to see a video of hooking up the 3-10 outputs to relays cant seem to get it to work, and alot ofh other people too. and mice video by the way
I Keep getting! Device is not ready with this thing and its a V2
Heya anyone who can help, I just recently wired up the newly created electronics package with the NVEM NOVUS however i've hit an impasse. All of my motors work. My configuration uses 4 motors, X axis is controlled by two motors. After I "slaved"the secondary motor to the "A"connection, the axis only moves one direction. It never switches when I press to go left or right - just moves the same direction. All the others run well in both directions perfectly.
Have you had this problem? Any idea what may be a cause?
Thank you in advance!
maybe the values in step puls and dir puls of the Mach3 Motor Tuning can be an issue.
@@Rudysbluesguitars thanks for the suggestion, I'll take a look and see what happens. Would you mind sharing your values for the dual motor drive set up? Does it work fine with your NOVUS?
Fyi also, switched from the 'A' connection to a 'B' connection on the NOVUS which didn't fix the issue. It persists. I have a 6 axis NVEM NOVUS V2
Make mach3 changes only when the drivers are all removed temporarily
Hello! This controller was taken from you, but it has a lot of problems: such as not returning home, out of tolerance, soft limits not working, frequent freezes and other problems. Send a link to the updated and corrected file Novusun.dll.
A Little narration would be nice???
Quite easy to do what you explain. The real deal is when you try to use this board in real world. Have try to do some Zeroing of your axis with this board? None of script work. Like the board doesn't do what you expect. Please share some just simple script of zeroing the Z. Should be this hard to do simple thing like that but it is . I think the firmware is not compatible at all with Mach3.
is that copy of windows 10 32 or 64 bit??
Hi, it is 64 bit Windows 10 on a HP ProBook 470 G5.
Hello, I am thinking of using a DC Motor Spindle.
I want to use NVBDL+ as the Spindle Driver and NVEM as the CNC Breakout Board. I want to control the Spindle Speed with PWM.
What is the appropriate connection between NVBDL+ and NVEM?
Hi, on www.nvcnc.net/ are documentation for both devices. You need the right version of each device to work with PWM. Hope thad helps.
hello,
thank you for your nice video!!!
I have the problem that I can't setup the Velocity in the motor tuning setup it always jumps back to zero.
My Y Axis value is only for 0 to 1 and I can't set it to a higher value.
Can you help me?
Thank you!
Check your firewall settings. I had the same problem.. problem solved thanks to this video.
See answer above about removing the Novusun drivers temporarily whilst making mach3 adjustments.
create a complete connection scheme.
Thanks its working:)
создайте польную схему соединения.
So I have to say, this NVEM Novus is full of mysteries. I'm beginning to think its a huge piece of wasted money.
So I connected all drives, everything 100% certain correctly wired. My X axis with a slaved motor (Dual drive) would only move one direction (either arrow key drives it the same direction). So I took Y and Z drives, and wired them to the X dual drive - the X drive would work perfectly (Moves both directions depending on the key pressed).
Now, I wired an additional motor - Y - it moves only 1 direction now. Did the same thing with Z - moves only one direction.
I have no idea what this means but if anyone has an idea please let me know.
Otherwise, I'm just buying a smoothieboard and let this be my last mistake when buying garbage with terrible information.
Are your keys mapped correctly ?
Hello, I am Maurizio from Italy, I used 2 Novusum for my cnc, by ethernet card, every think OK, I use inverter Mitshibishi 700/220 and work very well no others problem finded
Здравствуйте, Я Камран из Баку, Novusun2 для моего ЧПУ, по карте Ethernet, делаю все по монуалу но результатов ноль. Можете помочь?
when conect with router to control by WIFI check that the router assigns ip 192.168.1.X being X is 2-199 otherwise it will not work
Btw I have not been able to get any responses from the manufacturer.....glad I gave them a low rating.
Да они и мне тоже не отвечають.
@@kamran.veliyev.60veliyev49 yep and no-one has found how to control VFD and spindle speed - caused me a fire = i moved on to a better system
@@trondwell13 я перешел обратно в систему USB.
Hallo!!! Super Video!!!
Ich habe aber trotzdem Probleme!!!!,
Gemacht habe ich wie du, aber motor X,Y,Z sind tot!!!!.
Ich habe 2 nema 24 motoren für x,y und nema 34 für Z,
Habe nvem und nvum ausprobiert, die wollen einfach nicht drehen!!!!
Und mein MPG MIT BILDSCHIRM leuchtet aber auch ohne Funktion!!!
Bitte, bitte ,bitte ich habe keine Ahnung!!!!!
Wer weißt besser, ist herzliche willkommen
how to i connect my spindles to this nvemv2 ? can you email me?
Hewgant86@gmail.com
keren
Hi. I need help wiring the servo driver with the ALM + / ALM- connection and my controller card. Leave me your email to send you my scheme. Thank you
В РФ только у меня такой конфиг с такой платой управления? Или остальным впадлу комменты писать?
plug in
des Scheiß Ding funkioniert nicht richtig!!!! Es verfährt sich nach 2 bis3 mal fahren
Bei mir auch..ales versucht, schade das Geld weg ist😅
Would have been good if you had of talked instead of playing your favorite music.
the music was played by himself, i think both was well done....... ; -)
lieg am Programm.
Hallo, kann an Step Puls und Dir Puls im Motortuning von MACH3 liegen.
get a 7 pin cable lol
Groso