Hello, the binding button has a reserved hole, just use tweezers or toothpicks to easily press the button. ruclips.net/video/LkkEtJFXelw/видео.html&ab_channel=flywoofpv
Not really starting from scratch I do fly drones started around the same time as you except wanna do a little bit of exploring with FPV and being that it’s raining can’t really fly my drone outside. I have a total of seven DJI drones but lately the wind is been anywhere between 45 and 75 mph and raining hard in the Bay Area.
Hi Sir! Thanks for your videos! Do you think this drone is more wind resistant than the cinelog20? I was going to get the cinelog20 but it’s advertised as inside drone! That was a dealbreaker for me! Cinelog20 VS Cinerace20? 🤔🥴🥴 I can’t decide
would be nice if DJI would provide a right-angle USB connector with the Avata. I'm using a pair of bent-tip tweezers to get the micro-usb out of the drone.
Hi captain this is about a similar drone. Could you please do a video on jjrc h36 and how to set it up on the radiomaster tx16 s please. Seen alot of people has done it but not telling the set up to bind it. Please please
Just got one and waiting for delivery from China. I recently purchased the GEPRC CineBot30 and wasn't impressed with it. Hopefully this one is better. Any metal screw to metal?
In FPV you have unrestricted flight thus you have full control of every axis and are free to fly however you wish, just like a bird, this drone flights are no longer boring stabilized GPS flights.
How much time have you spent in sims? Also which sims have you been using? I’m looking to start the FPV journey soon. Definitely going to start with sims.
Hello Captain ! I am very hesitant between the cinerace20 and the cinelog20. From what I understand, the cinelog20 is more powerful and certainly more at ease in freestyle but with a shorter autonomy. I have the impression that both offer a very stable flight. The cinelog seems to me to be better built with the camera that can tilt. The cinerace has the advantage of a GPS, a led banner and a buzzer. Which one is less sensitive to wind and more solid? I would like to use my batteries which are tattu 750 mah and GNB HV 1100 mah which are the same weight. Would they be compatible with both drones ? I know this is not the purpose of these drones but I like to do some freestyle. Thanks for your help !
@@lucianoabf I bought the cinerace but it was a disappointment and if I had to do it all over again, I'd go for the cinelog. In fact, the RTH function caused the drone to fall (it flipped over) the first time without breaking anything and then a second time, breaking a duct. It took me at least two hours to change the duct. The assembly was of poor quality and everything had to be taken apart. I managed to put it back together, but one of the motors doesn't work any more, even though the welds look fine. Flywoo's after-sales service is not up to Geprc's standard, they respond when they have time without any real help. In short, I'm going to have to undo everything and try to change the motor. The flying qualities aren't bad, although in my opinion it's more sensitive to wind than the Cinelog. The range, on the other hand, is very good. You can't tilt the camera but I didn't feel the need to do so because it's really a proximity drone. In this sense, the GPS isn't necessarily useful, although the latest coordinates did help me find it because I'd had fun going a bit far. I think the Cinelog is much better built and easier to repair. So much for my opinion, which is based on a comparison with the Cinelog 30 I used to have, and the Cinelog 25 should be close.
I mean cinelog 20 should be close to my experience with cinelog 30. I also think that cinelog 20 is more powerful thant the cinerace but with less flying time. So Cinerace is not a bad drone but intervening on it is complicated...
@@alexiscoutier7682 thanks! Cinelog is sounding better than. This will be my first drone. Still need to buy the controller and practice on the simulator. Thanks again!
Like this one, here that you’re reviewing, how much would it cost the whole set up like I said this is not my first rodeo look at my video on this channel and you will see actually what I do. I’m a retired Marine now I am an injured postal worker bored out of my mind. It’s raining in San Francisco. It’s been raining late. The winds are running anywhere between I don’t know 35 to about 71 miles an hour. Can’t fly drone top there whatsoever and when it’s not raining, it’s crazy with the wind so brother I just don’t know how to buy the stuff or do you have a use set up like this one that you would like to get rid of or somebody out there that you know that may
Hello captain drone, i know im late like 4 days but can i use that battery from geprc that can fly 28 minutes (with this lil cinewhoop maybe even more) and if its under 249g?
If I may ask, how much did you pay for your the whole set up ready to fly. I’m a retired Marine vet that works for the United States Postal Service. I was injured on the job over this rain. There’s not very much to do can’t fly my drone outdoors. I was thinking something like this to fly indoors so if you could tell me how much something like this would set me back.
I’ve been in the RC hobby since 2013 so I have tons of gear over time so no great expense for this item. For you as a newbie, this is not the drone for you to start from scratch. You need plenty of knowledge of the RC hobby and ever more skills to fly. I suggest you look at the BetaFPV cetus X all in one ready to fly kit.
Hi Captain, quick question. Which do u like more for cinematic in exterior and a bit of acro. The cinerace, the defender 25 or the Geprc cinelog 20? thx a lot!
I noticed that the image quality is very bad away from the center, blurry. Wonder if this is because of ND or because there is so much vibration going on. You can see a lot of vibration in the corners. That would make it useless... or need to find a fix. Only the center is crisp. Might look into that?
@@CAPTAINDRONE798 I just started to lookup other youtubers and dootage, Drone Supremacy mentions the jello/vibrations on all his footage and he was flying in the woods, no wind. Sad :(
@@Photonees ok, now I’m confused. Are you new to drones? I’m not putting you down, but I’m so very confused at your response. The reason I ask is because you don’t sound like an FPV guy but rather a camera drone guy… like a MAVIC pilot. You see in the FPV world, there is no camera gimbal, so if you don’t want JELLO, you modify the two braces that hold the camera in place to stop motor vibrations. In addition you then use a configurable stabilization software, such as gyro flow. If 10 people buy this drone, only a few will show any sign of Jello due to motor vibration and camera bracing (all 10 drones will be different).
@@CAPTAINDRONE798 I'm a technical guy, I have many hobbies,Photography, RC, FPV, I dont fly mavics ,well, thats a lie, I have a Avata, but dont trust it for commercial use, so hardly fly it anymore, im into FPV for about a year now and I know gimbals would smooth out footage. What I look for and IS a known issue, is jello of the O3 might occur, perhaps because of a loose lens (several had to glue it down) and how well a drone/frame handles it. Why? because when I dont want to use a gopro to record footage, I want to use the O3. And there is a problem with the O3 (wich I already own on my nazgul) that might popup and might be because of a loose lens (after crashes or just out of the box?) For now, I dont have a problem with it that I noticed yet. But it's something I keep my eye on. And i'm looking for a smaller O3 cinewhoop for safer flying on commercial jobs at events. This one looks great, with the nice big soft guards. But depending on budget, I would like to use the O3 only. Seems that the jello on this unit might be a factor and make it useless for commercial use, so on reviews, i always pay close attention to this and start to watch more reviews what other say. The more info gained, the better. But form Drone Supremacy, it seems to be a dealbreaker. I know perhaps he can fix it by changing the PWM on the ESC to 48khz, but not sure if it fixes it. You might test it :) As the O3 IS a good alternative for a gopro, i want to have it as an option. Perhaps a better soft-mount could fix it? Who knows.. But if it has the problem, then recording 4K is useless and its just a VTX with useless footage and only good for flying. Btw, no offense taken :)
I have the walksnail one. It has the same issue as the DJI one where the bind button is obstructed by the prop guards. It's not a huge deal since you only really need to bind once. The worst part is having to update the firmware. Basically have to take the entire drone apart to plug in the firmware update cable. I even ended up accidently breaking the frame because it's an extremely tight fit putting it back together. Thankfully a replacement frame isn't too expensive. The LED strip doesn't like to stick again once you peel it off though. It is fun to fly. Very loud. Easily pushed around by the wind. With the huge prop protection, I'll fly it almost anywhere.
will the dji unit put me under the restrictions? I live just inside airport no fly (literally 100ft if i go next door its ok.lol) looking at a cinewhoop i can fly in doors (INDOORS!! lol) to keep skills moving wihtout having to leave the house... but my Avata wont let me fly even in doors
I have shown GPS rescue in action on many other drones so I don't bother to show it on the new drones. Perhaps on the next drone I review that has GPS rescue, I'll show it in action in a very quick segment.
I’ve got the Dji controler on the website I’m buying this from it says (PNP(built-in DJI receiver) not included) sooooo does that mean I can use my Dji controller or do I have to buy something else? Sorry I’m new to this lol!
@@CAPTAINDRONE798 that’s perfect ordering this tonight thank you so much it was your video that made me decide to go for this one so thank you and thank you for replying!
....well, we can't all fly like Nick Burns :). Decent under 250G but it does have that high-pitched whine that would be upsetting to anyone that I flew by in a park or urban area, which somewhat defeats the under 250 G category. Ducts are too big for outdoor work unless it's calm. The camera is out front and not protected very well; 3D printed camera mount looks kind'a cheap. Niche is best for indoor real estate work. ND filters + 03 + Gyroflow = really nice footage... so much better than using a heavy GoPro unless you are shooting commercially.
Nick Burns flys the exact same pattern indoors and outdoors for every drone... he could do it in his sleep. I try to fly in different locations which causes viewers to stick around longer just watching to see if I'll crash into something new! :-)
@@CAPTAINDRONE798 I was just trolling 'ya touch; Nick never flies anything larger than 75mm in the house, and yes, I'm sure he tells his wife exactly where to place their living room furniture so that he can flay faster :). Still waiting for an 03 toothpick drone (or slightly larger) that's both aerobatic and gets in just under 250G. We are getting close.
I’m having trouble with this drone I got my dji fpv controller bound and goggles 2 bound. I can see the o3 in camera ect. But in betaflight I have no controller movement or the when I move drone around. I used one of ur old vids to bind ect but I stuck now cause I have no movement and assigning buttons in beta flight. Plus useing the new betaflight. The control we bound cause I can turn light on and off with button but that it. Any help be appreciated. Thanks.
@@CAPTAINDRONE798 it was bnf dji. I going threw josh barwell walk threw now on beta flight to learn everything. I didn’t see stick movement or drone move cause I had to find the right usb cable. It micro usb so has to dig and try a couple tell I found one. I think once I get threw the walk threw I should be all set I hopeing. Also ep 12 was what I was going off and how got everything binded. I mite go back to it since I can see stuff now with the usb. Only problem I have been having now is radio seems to disconnect after awhile or something I not sure mite be since don’t have everything setup. Also control same as ur ep 12. Thanks
How's the penetration through walls, good enough to fly throughout a house with 3 floors or even just 2 floors and still get good quality video to record? Love your videos, very unbiased and informative.
Could you have flown from inside your truck ? We're it's warm . I don't know how you Canadians do it. I think I'm going to start with that last 30 dollar drone though.
Some fly in their vehicles in the winter but only in locations where there are not other cars parked. I like to fly outside as my brain wants to hear the motors and I other fly 360 around me which doesn’t work sitting in a vehicle.
I am so curious, are there any TRUE ducted whoops on the market? And if the ducts on those hit something will they deform enough to contact the prop tips and bring the whole quad down?
@@Finnv893 Do you mean like in EDF RC planes? In the drone hobby the prop is certainly milimeters from the duct, but not as precisely as a high end EDF RC plane motor where the volume of air on intake/output is set for maximum thrust.
Reminds me of the DJI Avata that am thinking to buy, the combo kit which includes the Goggles which look like the one you have am not sure. I own a Phantom 3 pro that hasn’t been used in 5 years, so the 4 batteries are dead, but one strangely enough charged as it had some power left. I heard that it is possible to revive the bricked batteries, let’s see.
@@CAPTAINDRONE798 I did consider getting the FPV remote 2, as the other that comes in the kit would feel a little strange with only ever using the common remote design, thanks for your advice. Have a nice day, Colin 👍
If it has a DJI Video system in it, then it only connects to DJI. Same as if it had WALKSNAIL, it would only connect to WALKSNAIL type goggles, and if it had ANALOG, then it would connect to any ANALOG type goggles.
You suffer in vain !!! Get yourself some electric/battery heated clothing, and a propane big buddy heater to keep your hands warm while you fly !!!! Come on Captain Drone...what kind of a techie gadget guy are you? lol
![☀ 15 минут на вупе - как это возможно? [Flywoo CineRace20]](http://i.ytimg.com/vi/3WdW_P-DxCs/mqdefault.jpg)
![☀ 15 минут на вупе - как это возможно? [Flywoo CineRace20]](/img/tr.png)
![☀ Братишка большого синелога, но смысл тот же. [GepRC Cinelog25 V2 O3]](http://i.ytimg.com/vi/sxW1ygJ9Soc/mqdefault.jpg)
Hello, the binding button has a reserved hole, just use tweezers or toothpicks to easily press the button.
ruclips.net/video/LkkEtJFXelw/видео.html&ab_channel=flywoofpv
marvelous! Thanks Flywoo for the explanation. Looking forward to my CineRace20 O3
I totally missed this. Well that certainly makes binding to FPV Goggles and Remote, so much easier. Thank you!
Not really starting from scratch I do fly drones started around the same time as you except wanna do a little bit of exploring with FPV and being that it’s raining can’t really fly my drone outside. I have a total of seven DJI drones but lately the wind is been anywhere between 45 and 75 mph and raining hard in the Bay Area.
I hope this is as easy as in vid to bind to goggles. Not sure if I gotta root them and betaflight. Then switching back and forth to my dji fpv.
Very nice! Happy flying.
Fun video !
Keep ‘em coming,
Thanks Steve!
😃
Good review and video Steve.
Excellent Tutorial Video. Nice FPV Drone. Thank You Steve.
I just got the analog version (ELRS), absolutely love it
Hi Steve.....Thats a fun little FPV..........👍
Love all of your videos, captain. Cool demo.
Thank you
Really great footage
Really nice set up
Love your videos, Captain!
Thank you kindly!
Wow, that thing sounds LOUD!!! It whines louder than my cat-LOL! 🐱🐱🐱 Thx for the great review!
Another cool little drone. go get warm
Sounds really good
❤️ that hat! Almost as cool as your GoPro hat. 👍 as always
Me like drone! 😂😂 I like most everything you review, because you make things look easy to fly and fun. Great job 👍
awsome captain.
11:00 that's a quite impressive flight time in the cold.
Hey Cappy……i found a hand warmer made for us droners. No more gloves! I got a video up on it. One big hand warming glove!
*Great video mate, could you add a GoPro?*
Thank you ... i love all your videos and god bless you Captain.❣❣
Thank you!
Great review
💙🙏👊
Your drone reviews are amazing!
Glad you like them!
Awesome review Thanks
A clear pop up 1 person shelter and a small propane heater would make things more enjoyable on the really cold days.
Very good drone capitan.👍
Would you prefer The GerpRc Cinelog 20 or this
It all depends what the use is for
Great job on the way make these videos, very clever :)
Thank you very much!
That's absolutely great and awesome drone sir
Hi Sir! Thanks for your videos! Do you think this drone is more wind resistant than the cinelog20? I was going to get the cinelog20 but it’s advertised as inside drone! That was a dealbreaker for me! Cinelog20 VS Cinerace20? 🤔🥴🥴 I can’t decide
If you start from scratch, which is the most advisable Receiver system? I just think to go simple with the dji pnp..🤔
Good evening captain really nice drone cool review always great information
Thanks 👍
would be nice if DJI would provide a right-angle USB connector with the Avata. I'm using a pair of bent-tip tweezers to get the micro-usb out of the drone.
Hi captain this is about a similar drone.
Could you please do a video on jjrc h36 and how to set it up on the radiomaster tx16 s please.
Seen alot of people has done it but not telling the set up to bind it.
Please please
I like the lights
Nice little drone! What version of betaflight is used for this drone?
Just got one and waiting for delivery from China. I recently purchased the GEPRC CineBot30 and wasn't impressed with it. Hopefully this one is better.
Any metal screw to metal?
can you review the QWinOut F4 X1 175mm RTF kit
thanke you for this video. I thought that this woop can't fly freestyle
Whoops can do Freestyle for sure, but not as good as an X-Frame FPV drone.
I like the finder beeper and the tracker - Still don't quite get the fascination with flips - whats that all about?
In FPV you have unrestricted flight thus you have full control of every axis and are free to fly however you wish, just like a bird, this drone flights are no longer boring stabilized GPS flights.
Cinelog20 O3 or CineRace20 O3 ??
Both good so you can't lose
Hi Steve.. nice bit if kit... Quick question.... Unrelated but what is your outro music called?😊
Loud & Clear
It's gonna be so cool flying a fpv. I'm tired of flying a sim. But I have got good
How much time have you spent in sims? Also which sims have you been using? I’m looking to start the FPV journey soon. Definitely going to start with sims.
Hello Captain ! I am very hesitant between the cinerace20 and the cinelog20. From what I understand, the cinelog20 is more powerful and certainly more at ease in freestyle but with a shorter autonomy. I have the impression that both offer a very stable flight. The cinelog seems to me to be better built with the camera that can tilt. The cinerace has the advantage of a GPS, a led banner and a buzzer. Which one is less sensitive to wind and more solid? I would like to use my batteries which are tattu 750 mah and GNB HV 1100 mah which are the same weight. Would they be compatible with both drones ? I know this is not the purpose of these drones but I like to do some freestyle. Thanks for your help !
I am thinking about those 2 as well. Which one did you end up buying? How is it?
@@lucianoabf I bought the cinerace but it was a disappointment and if I had to do it all over again, I'd go for the cinelog. In fact, the RTH function caused the drone to fall (it flipped over) the first time without breaking anything and then a second time, breaking a duct. It took me at least two hours to change the duct. The assembly was of poor quality and everything had to be taken apart. I managed to put it back together, but one of the motors doesn't work any more, even though the welds look fine. Flywoo's after-sales service is not up to Geprc's standard, they respond when they have time without any real help. In short, I'm going to have to undo everything and try to change the motor. The flying qualities aren't bad, although in my opinion it's more sensitive to wind than the Cinelog. The range, on the other hand, is very good. You can't tilt the camera but I didn't feel the need to do so because it's really a proximity drone. In this sense, the GPS isn't necessarily useful, although the latest coordinates did help me find it because I'd had fun going a bit far. I think the Cinelog is much better built and easier to repair. So much for my opinion, which is based on a comparison with the Cinelog 30 I used to have, and the Cinelog 25 should be close.
I mean cinelog 20 should be close to my experience with cinelog 30. I also think that cinelog 20 is more powerful thant the cinerace but with less flying time. So Cinerace is not a bad drone but intervening on it is complicated...
@@alexiscoutier7682 thanks! Cinelog is sounding better than. This will be my first drone. Still need to buy the controller and practice on the simulator. Thanks again!
@@lucianoabf Should be a perfect drone to practise with a good video quality !
Can you please do a review of cfly faith mini?
Like this one, here that you’re reviewing, how much would it cost the whole set up like I said this is not my first rodeo look at my video on this channel and you will see actually what I do. I’m a retired Marine now I am an injured postal worker bored out of my mind. It’s raining in San Francisco. It’s been raining late. The winds are running anywhere between I don’t know 35 to about 71 miles an hour. Can’t fly drone top there whatsoever and when it’s not raining, it’s crazy with the wind so brother I just don’t know how to buy the stuff or do you have a use set up like this one that you would like to get rid of or somebody out there that you know that may
Hello captain drone, i know im late like 4 days but can i use that battery from geprc that can fly 28 minutes (with this lil cinewhoop maybe even more) and if its under 249g?
Yes and No. that battery is heavy so some small drones may not fly well.
Many thanks for posting Captain; quick question; can the prop guards be removed?
Not really on this drone
Cool 🤝🤝
Very very thx your conseil
Commander 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Bring back the analog FPV
If I may ask, how much did you pay for your the whole set up ready to fly. I’m a retired Marine vet that works for the United States Postal Service. I was injured on the job over this rain. There’s not very much to do can’t fly my drone outdoors. I was thinking something like this to fly indoors so if you could tell me how much something like this would set me back.
I’ve been in the RC hobby since 2013 so I have tons of gear over time so no great expense for this item. For you as a newbie, this is not the drone for you to start from scratch. You need plenty of knowledge of the RC hobby and ever more skills to fly. I suggest you look at the BetaFPV cetus X all in one ready to fly kit.
Hi Captain, quick question. Which do u like more for cinematic in exterior and a bit of acro. The cinerace, the defender 25 or the Geprc cinelog 20? thx a lot!
The differences are not massive between the 3 to pick.
Hi. Please tell me how to configure the backlight on the remote control?
Lights on FPV drones are usually controlled by one of the USER or AUX modes in Betaflight Configurator that you can assign to a switch on your radio.
I noticed that the image quality is very bad away from the center, blurry. Wonder if this is because of ND or because there is so much vibration going on. You can see a lot of vibration in the corners. That would make it useless... or need to find a fix. Only the center is crisp. Might look into that?
Wind baby, wind! That should answer your question.
@@CAPTAINDRONE798 I just started to lookup other youtubers and dootage,
Drone Supremacy
mentions the jello/vibrations on all his footage and he was flying in the woods, no wind. Sad :(
@@Photonees ok, now I’m confused. Are you new to drones? I’m not putting you down, but I’m so very confused at your response. The reason I ask is because you don’t sound like an FPV guy but rather a camera drone guy… like a MAVIC pilot. You see in the FPV world, there is no camera gimbal, so if you don’t want JELLO, you modify the two braces that hold the camera in place to stop motor vibrations. In addition you then use a configurable stabilization software, such as gyro flow. If 10 people buy this drone, only a few will show any sign of Jello due to motor vibration and camera bracing (all 10 drones will be different).
@@CAPTAINDRONE798 I'm a technical guy, I have many hobbies,Photography, RC, FPV, I dont fly mavics ,well, thats a lie, I have a Avata, but dont trust it for commercial use, so hardly fly it anymore, im into FPV for about a year now and I know gimbals would smooth out footage. What I look for and IS a known issue, is jello of the O3 might occur, perhaps because of a loose lens (several had to glue it down) and how well a drone/frame handles it. Why? because when I dont want to use a gopro to record footage, I want to use the O3. And there is a problem with the O3 (wich I already own on my nazgul) that might popup and might be because of a loose lens (after crashes or just out of the box?) For now, I dont have a problem with it that I noticed yet. But it's something I keep my eye on. And i'm looking for a smaller O3 cinewhoop for safer flying on commercial jobs at events. This one looks great, with the nice big soft guards. But depending on budget, I would like to use the O3 only. Seems that the jello on this unit might be a factor and make it useless for commercial use, so on reviews, i always pay close attention to this and start to watch more reviews what other say. The more info gained, the better. But form Drone Supremacy, it seems to be a dealbreaker. I know perhaps he can fix it by changing the PWM on the ESC to 48khz, but not sure if it fixes it. You might test it :) As the O3 IS a good alternative for a gopro, i want to have it as an option. Perhaps a better soft-mount could fix it? Who knows.. But if it has the problem, then recording 4K is useless and its just a VTX with useless footage and only good for flying. Btw, no offense taken :)
@@Photonees I think you better option is Cinelog20. I bought recently and 0 jello :)
I have the walksnail one. It has the same issue as the DJI one where the bind button is obstructed by the prop guards. It's not a huge deal since you only really need to bind once. The worst part is having to update the firmware. Basically have to take the entire drone apart to plug in the firmware update cable. I even ended up accidently breaking the frame because it's an extremely tight fit putting it back together. Thankfully a replacement frame isn't too expensive. The LED strip doesn't like to stick again once you peel it off though.
It is fun to fly. Very loud. Easily pushed around by the wind. With the huge prop protection, I'll fly it almost anywhere.
will the dji unit put me under the restrictions? I live just inside airport no fly (literally 100ft if i go next door its ok.lol) looking at a cinewhoop i can fly in doors (INDOORS!! lol) to keep skills moving wihtout having to leave the house... but my Avata wont let me fly even in doors
In the FPV hobby, drones are not beginner GPS drones (that DJI makes) with built in flight restrictions.
Can you show the GPS rescue in action on a future video? Thanks!
I have shown GPS rescue in action on many other drones so I don't bother to show it on the new drones. Perhaps on the next drone I review that has GPS rescue, I'll show it in action in a very quick segment.
@@CAPTAINDRONE798 That would be great. I used it a few years ago but it ended in disaster lol
I’ve got the Dji controler on the website I’m buying this from it says (PNP(built-in DJI receiver) not included) sooooo does that mean I can use my Dji controller or do I have to buy something else? Sorry I’m new to this lol!
In the CHINA world, PNP for drones with the DJI 03 system, usually means you can use your DJI FPV REMOTE 2.
@@CAPTAINDRONE798 that’s perfect ordering this tonight thank you so much it was your video that made me decide to go for this one so thank you and thank you for replying!
Cost for the entire kit? Close to $700 US?
Will the tbs tango 2 work with this drone?
If you get the model with CROSS FIRE it probably would
Hey Cappy, what do you think the max size of battery this cinerace can handle? Thanks! 👊👍👍
Probably 850 to 1100 mAh batteries that don’t weigh much.
Hi,I noticed that at some points I could see jello effect.Why was that? Wind was causing it?
Wind, Wind, Wind
is there anything similar with hdzero ?
....well, we can't all fly like Nick Burns :).
Decent under 250G but it does have that high-pitched whine that would be upsetting to anyone that I flew by in a park or urban area, which somewhat defeats the under 250 G category. Ducts are too big for outdoor work unless it's calm. The camera is out front and not protected very well; 3D printed camera mount looks kind'a cheap.
Niche is best for indoor real estate work. ND filters + 03 + Gyroflow = really nice footage... so much better than using a heavy GoPro unless you are shooting commercially.
Nick Burns flys the exact same pattern indoors and outdoors for every drone... he could do it in his sleep. I try to fly in different locations which causes viewers to stick around longer just watching to see if I'll crash into something new! :-)
@@CAPTAINDRONE798 I was just trolling 'ya touch; Nick never flies anything larger than 75mm in the house, and yes, I'm sure he tells his wife exactly where to place their living room furniture so that he can flay faster :). Still waiting for an 03 toothpick drone (or slightly larger) that's both aerobatic and gets in just under 250G. We are getting close.
I’m having trouble with this drone I got my dji fpv controller bound and goggles 2 bound. I can see the o3 in camera ect. But in betaflight I have no controller movement or the when I move drone around. I used one of ur old vids to bind ect but I stuck now cause I have no movement and assigning buttons in beta flight. Plus useing the new betaflight. The control we bound cause I can turn light on and off with button but that it. Any help be appreciated. Thanks.
Did you get the PNP version of the drone? Did you also watch episode 12 of my FPV FOR BEGINNERS video series?
@@CAPTAINDRONE798 it was bnf dji. I going threw josh barwell walk threw now on beta flight to learn everything. I didn’t see stick movement or drone move cause I had to find the right usb cable. It micro usb so has to dig and try a couple tell I found one. I think once I get threw the walk threw I should be all set I hopeing. Also ep 12 was what I was going off and how got everything binded. I mite go back to it since I can see stuff now with the usb. Only problem I have been having now is radio seems to disconnect after awhile or something I not sure mite be since don’t have everything setup. Also control same as ur ep 12. Thanks
How's the penetration through walls, good enough to fly throughout a house with 3 floors or even just 2 floors and still get good quality video to record?
Love your videos, very unbiased and informative.
Outstanding wall penetration of 3 floors easily
Is there a walksnail version of this or will there be in the future ?
Not yet
Could you have flown from inside your truck ? We're it's warm . I don't know how you Canadians do it.
I think I'm going to start with that last 30 dollar drone though.
Some fly in their vehicles in the winter but only in locations where there are not other cars parked. I like to fly outside as my brain wants to hear the motors and I other fly 360 around me which doesn’t work sitting in a vehicle.
got the frame only. will put ratel 2 and bigger motors on it löl
I am so curious, are there any TRUE ducted whoops on the market? And if the ducts on those hit something will they deform enough to contact the prop tips and bring the whole quad down?
Not really, I've never had that occur. You can crazy large ducted whoops, but they sound LOUD and speed suffers.
@@CAPTAINDRONE798 I just imagine that they would because true ducting means the air gap can be measured in fraction of a milimeter😅
@@Finnv893 Do you mean like in EDF RC planes? In the drone hobby the prop is certainly milimeters from the duct, but not as precisely as a high end EDF RC plane motor where the volume of air on intake/output is set for maximum thrust.
Hello from Indonesian. How to change the led to switch mode. Thx
Go in Betaflight Configurator and look for USER1 and assign switch
@@CAPTAINDRONE798 thx captain
Can it display different colours?
Possibly but not directly out of the box
I wish the camera was better protected, otherwise great drone!
Would this be OK to use 850 mah battery
Yes
Did you notice any jello in the footage?
None noticed
Reminds me of the DJI Avata that am thinking to buy, the combo kit which includes the Goggles which look like the one you have am not sure. I own a Phantom 3 pro that hasn’t been used in 5 years, so the 4 batteries are dead, but one strangely enough charged as it had some power left. I heard that it is possible to revive the bricked batteries, let’s see.
Avata is a good kit to get to get you into the FPV hobby from a beginner level. Just be certain to also purchase the DJI FPV remote 2
@@CAPTAINDRONE798 I did consider getting the FPV remote 2, as the other that comes in the kit would feel a little strange with only ever using the common remote design, thanks for your advice. Have a nice day, Colin 👍
everything seemed nice till I got to the price tag... YIKES! welp that's DJI for ya... lets just see how deep our customers pockets are
Can this drone connect to any goggles or just DJI goggles?
If it has a DJI Video system in it, then it only connects to DJI. Same as if it had WALKSNAIL, it would only connect to WALKSNAIL type goggles, and if it had ANALOG, then it would connect to any ANALOG type goggles.
👍
You suffer in vain !!! Get yourself some electric/battery heated clothing, and a propane big buddy heater to keep your hands warm while you fly !!!! Come on Captain Drone...what kind of a techie gadget guy are you? lol
A complete nerd
Seems a silly idea to have the leds the same colour front to back
You have FPV Goggles on, hence you don't look at the drone. I believe you are confusing an FPV drone with a GPS Camera Drone, like a DJI Mavic.
@@CAPTAINDRONE798 I'm not confusing anything. If you want to fly it line of sight, all the same colour makes it unnecessarily harder.
@@TheRattleSnake3145 But again… humans don’t fly FPV drones one of sight.
@@CAPTAINDRONE798 I do and I'm human. The guys at the club do and they are human. Even you did in the video.
Pls do a collab with ken heron or joshua bardwell 🥺🥺🙏🙏
They won’t have anything to do with this guy.