it works for me. the brightness setting of my loptop has gone useless. I cant decrease the full brightness until the battery often drained quickly. Just turned it off and removed the battery, pressed the power button for 15 times before switching on. It was restored then. Thanks!
Thank you for this video! My screen brightness dropped very low and all my settings were still at 100%. I did each step in the video until it was fixed. Ultimately it was the bios update that fixed it. I fixed my computer and learned a few things in the process!
Hi there, thanks for contacting HP Global Social Media Support! I understand that you are experiencing an issue with the brightness of your notebook. I will do my best to assist you. As the issue persist in bios, this seems to be a hardware issue. In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty. Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html Binu_HP Social Media Tech Support
+Muhammad Nur Faiq Shamsuddin Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
So the Function key brightness overrides the Windows display parameters which were at 100%.. I suppose that makes sense in retrospect as a desktop can't adjust brightness controls on an external monitor. Pointing those out was a big help.
+Stuart Currie Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
+Mohamed Tousif Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
My problem was, when i disconnected the power, the brightness would drop significantly on battery mode, even when everything was set to high. Here's my solution: The option not mentioned in the video is to check the settings on your integrated graphics, which is possibly Intel or AMD. Just right click on your desktop and you should see a selection for Intel//AMD settings. Hunt all the options, its buried in there somewhere. Mine turned out to be AMD's Vari-Bright which was turned on by default. After disabling the Vari-Bright the brightness shot up to maximum immediately. Others will Intel graphics have reported similar success.
+Jas C Yes. This seems to be a hardware issue. Please contact our phone support team to fix this. Please follow these steps to reach them. Step 1. Open link: support.hp.com/us-en/contact-hp Step 2. Select the product type. Step 3. Enter the serial number of your device or select let HP detect your product option. Step 4. Select the country from the drop-down. Step 5. You should see the HP phone support number.
+Tanika Naik This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
Hi there, thanks for contacting! I understand that you are experiencing an issue with the screen and disc space of your computer. I will do my best to assist you. Please refer to the instructions mentioned under these documents to fix this issue: bit.ly/3umNZID and bit.ly/2OY4tXf Binu - Social Media Tech Support
HP Support Assistant doesnt show any uninstalled updates, but the homepage mentioned in the video does. Should I install all the updates for my device? THX for your help!
+Florian Kleinhans Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
+abutterflypost Go to Start -> Settings -> Update & security, then Check for updates and install any available updates. You might need to update the display driver from the manufacturer of your computers website
Hi, I have a HP probook, when I click the fn and the brightness key, it doesn't work. But it does work for the volume buttons. How do I reduce/increase brightness with the keyboard keys?
+Aishwarya M Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
Hi Bengt, thanks for contacting HP Global Social Media Support! Thanks for sharing the steps that helped you! If you need any help in the future, you can always get back to us. Thank you for being a valuable HP customer. Have a wonderful day! Cheers! Binu - Social Media Tech Support
+Soft Finger If you're having trouble with your screen's brightness, use the function keys F2 and F3. The F3 key will be the one to raise the brightness, so press the F3 key until you reach your desired brightness. If this doesn't work, check to see that the F3 key is working by pressing F3 while holding down the FN key.
Thanks! Very helpful. My function keys had been turned off, and I accidentally turned them on, which made the keyboard and brightness all wonky. Simple matter of hitting FN F10. Cheers.
+Nilutpal Das Learn how to change icon size, screen saver, desktop background, text size, and other desktop or display settings in Windows 10 and Windows 7 as mentioned here: hp.care/2rKFmua
Hi Lauren, thanks for contacting HP Global Social Media Support! We are delighted to hear that the video has helped you fix the issue! If you need any help in the future, you can always get back to us. Thank you for being a valuable HP customer. Have a wonderful day! Cheers! Binu - Social Media Tech Support
+Bapon This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
Hi James, thanks for contacting HP Global Social Media Support! I understand that you are experiencing an issue with the screen of your notebook. I will do my best to assist you. Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3iTLkov Binu_HP Social Media Tech Support
+JosefTV Goku Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
Hi, my brightness is dimming automatically when playing video on full screen, (if I'm playing a video in youtube with full screen my brightness gets dimmed) all other times I have full brightness, please give me a solution for this problem, it's very annoying when you're trying to watch a movie or something.
+sooraj s Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
I purched HP15s GR0500au RYZEN 5 model from hp world on 01.08.2021 and I realised after bringing it home that the brightness of this model is very high. I tried to fix the brightness level by adjusting the bar handle in settings but it was of no help. I tired to turn on the dark mode but it is lighter as compared to my other hp laptop gr0012au RYZEN 5, purchased last month. The brightness of gr0500au model is very bright and when I dim the brightness it gets very hard to read anything on the screen.
+Swasti Shree This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
+Anatolij Sergejev Go to Control Panel, Hardware and Sound, Power Options. Click on Change plan settings next to your active power plan. Click on Change advanced power settings. Scroll down to Display, then under Enable adaptive brightness, switch it off for both the battery and plugged in modes.
So I bought HP 250 G7 notebook two months ago and since then m dealing with a screen that keeps getting dim and bright on its own!! I ve installed OS all over again and drivers are up to date
+candy kiran Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
My Hp laptop screen dims when any kind of interface with Black or Grey Image comes. I have been facing this issue for the past two months. And no one could resolve the problem. what to do?
+Explore World Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
@@HPSupport I have done all things you mentioned. My last step was Reinstalling the window from HP recovery. I hope you did not get my question. *I said Whenever Dark image comes then it dims.* Which is called *"AMBIENT DISPLAY SENSOR" in laptop,* how to fix that please let me know. Hope I have explained you well to resolve my problem.
@explore world No worries😂😂 its a normal thing and happens with all laptops to correct this, just go to intel settings, power option and disable the downside option
+kumararaja kingkumararaja Try reinstalling the HP Hotkey driver on the following link. h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_156452_1&swEnvOid=419... When the reinstallation has completed, restart the notebook.
+Sharan Shetty This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
+sayanjit adak Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
I was tried to search on youtube about this...but the old hp laptops video..this This is new..and I also knew about it... I just forget..thank for the video...
DUDE THANK YOU BRO I set my bright ness in 0 now it’s black screen and it’s not my laptop and I watched this video and 12 seconds in it lighted bro thank you ima like and subscribe!
Hi Eugenio, thanks for contacting! We are delighted to hear that it is working! If you need any help in the future, you can always get back to us. Thank you for being a valuable HP customer. Have a wonderful day! Cheers! Binu - Social Media Tech Support
+Vidya Praveen This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
+mahmoud abd elkarem In the BIOS there is an option under the "Advanced" tab, Scroll down to the "Hybrid Graphics" checkbox, and UNCHCEK that box. If you are having this issue, this simple thing could fix it for you. What that does is enable the AMD graphics chip, and when that is enabled it will interfere with the fn-f9/fn-f10 options to dim the screen. If you don't have that option then you don't have dual video chips, and your issue is probably drivers with the video and/or hotkey software.
Hi Mandela, thanks for contacting! I understand that you are experiencing a dim display issue on your notebook. In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty. Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html Binu - Social Media Tech Support
My laptop has a bluish tint to it and the colors from it look very different from my iphone. While this is typical for every gadget, is there anyway to fix this? Digital art is my work, I couldn't work with faded out and or colors that are too contrasted.
+Vermin Meridas Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
Hi there, thanks for contacting HP Global Social Media Support! I understand that you are experiencing an issue with the display as it is dim. I will do my best to assist you. Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3GVtoTL Binu_HP Social Media Tech Support
+Vivek Choudhary Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
My laptop is hp pavilion 360 degrees convertible laptop. I bought it 5 months back. After i updated laptop iam facing a dim screen issue, when i put flash light on the screen iam able to see the screen. But no mouse pointer is available. I can only see my lock screen. Some days i can see the screen full bright and after working for 2 to 3 hrs its automatically turning off. Whats the main issue with these?
+E Jeethendrinee This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
+Elelwani Makhuvha This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
Hi there, thanks for contacting HP Global Social Media Support! I am here to help! What seems to be the issue? Could you please elaborate? Are you facing any technical issues with your HP computer? May I know the computer you are using? Let me know! Regards, HP Support
hey thanks for the tips, but I've got a question not sure if it's related to the matter or not but it is something weird and I need your guide on it if possible. problem is that when I do a photoshop project the output exposure is quiet satisfying but when I send that image to anyone else's device such as mobile devices or other newer model pcs and laptops it's so dark less exposure than it is on my laptop sony vaio f12Hfx 16.4 2010.
None of these helped. Windows 10 in battery mode has a much lower "max" brightness than it is on AC adapter mode. This settings cannot be changed anywhere. Drivers are all up to date and Windows 10 is fully updated. How do I force the screen to be as bright on battery mode as it is on AC adapter mode? Both mode has the screen brightness set to 100%, but battery mode is still much dimmer.
+Mika Norén This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
+Hawkins This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
From the BIOS menu, check the brightness of the screen? What if at this step your screen brightness is dim? what do you do then? I wouldn't have bought this laptop is If knew the screen quality was this low. I did purchase this during lockdown so wasn't able to get my hands on one and test it in the shop. Disapointing
+Mike Ashcroft Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
@@HPSupport Yeah I have done all of that but the screen is still incredibly dim. What i am asking is what do if, after the BIOS stage, the screen is still dim. This implies it is now an issue with windows but the laptop itself. Is it an issue with my laptop covered under warranty?
How do i change the brightness on a external monitor? Mine is blindingly bright and there is no brightness slider in settings. The one in the notification menu is greyed out
+Jillian On the Start screen move the cursor to the upper right corner to open the Charms menu. Click Settings. Figure : Charms menu. Click Brightness. ... Click the slider and drag it up or down to adjust the brightness of the screen.
+Cyber Data channel Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
+SyZy Gy Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
+Ãñjãñ shrêsthâ Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
Hello,this didn't help me out. When I increase brightness of my hp laptop, it gets whiter,and the colours get darker.please help me out,it's very annoying
+Shashwat Mishra Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
Hi Jay, thanks for contacting HP Global Social Media Support! We are delighted to hear that the video has helped you fix the issue! If you need any help in the future, you can always get back to us. Thank you for being a valuable HP customer. Have a wonderful day! Cheers! Binu_HP Social Media Tech Support
+SAAD JETHAVA HP does not recommend upgrading or downgrading hardware parts or software that is bundled with the product as It may affect the manufacturer's warranty and performance, however, you could change the configuration at your own discretion.
+Bybo This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
i just want a moderate display brightness but the issue is that it won't make any difference in display to low(0) or high(100%) the slider. the brightness is so high , what's the issue?
+us official Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
My problem is not reaolved 😓 Actually when is connect power,the little bit of bottom right part of screen goes bright, otherwise when i disconnect power,whole screen goess veryyy dimmm,hardly i can see the display.... please suggest me the solution !!!
+Shinzaku This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
my laptop isnt so much struggling with dimity, its just whenever i put the brightness up, the whites on the screen get too bright and its like the shadowing and certain details dont show up and the colour seems to be more washed. i dont know what to do about this. ive tried calibrating my colours but when it comes to the gamma part, i cant get it to a place where its not either too high or too low. i have the HP pavilion g6 notebook (maroon), processor is AMD E2-1800 APU with Radeon(tm) HD Graphics 1.70 GHz System Type x64-based PC. I'm also apparently up-to-date with all updates, i thought itd maybe be the driver but apparently not.
+S U J I N X Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
+Mt346 Minecraft Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
Hello, just got my HP AMD A10 and opened my gmail using this device, unfortunately the status indicator button (Green-for available) can't be changed to this status "Set as away". I can't click it. Hope you can help me with this.Thank you!
Hi there, thanks for contacting! I understand that you are experiencing an issue in setting away status in Gmail. I will do my best to assist you. On your computer, open Gmail. At the top right, next to your status indicator, click the Down arrow . Choose: Automatic, Do not disturb, or Set as away. Binu - Social Media Tech Support
This doesnt fix my problem, whenever i open a different application the screen synchronizes the brightness, light, shadows and everything to the application i am running. Say if i run a movie and the scene is dark, screen changes colors gets darker and if i instantly switch tab to example google sheets, the letters seem very bright and the whole screen. I have changed 4 different laptops so far and i have never had this problem. There is some sort of Auto brightness/gamma/color setting running in the background which i cannot find. Please advise, it is very annoying to my eyes. Thanks
Hi Petar, thanks for contacting! I understand that you are experiencing an issue with the screen of your notebook. I will do my best to assist you. Please refer to the instructions mentioned under this document to fix the issue: hp.care/2oPxHcG Binu - Social Media Tech Support
@@HPSupport downloading graphic driver from your website helped a lot!! Colors are a little brighter but its better than before thank you EDIT: after calibrating my screen to the darkest now the image is amazing thank you !!!!
We are delighted to hear that it is working! If you need any help in the future, you can always get back to us. Thank you for being a valuable HP customer. Have a wonderful day! Cheers! Binu - Social Media Tech Support
Can you help me? My laptop screen brightness is too low even i am increase brightness using fn shortcut, i am hardly see what's in my monitor, i am using Flashlight on my phone to see it, but still its too dark to see, my laptop is hp omen dh-0105tx
+Reza This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
+Mohit Shetty Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
+Alseam Onoy This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: bit.ly/3822cjQ
Hi Ali, thanks for contacting! I understand that you are unable to find brightness control option in windows. I will do my best to assist you. Please try the below mentioned steps to fix the issue: 1) Search for Device Manager in Start Menu 2) Expand the Monitors section 3) Right click on Generic PnP Monitor and 4) Click on Enable and you are good! Let us know how it goes. Binu - Social Media Tech Support
@@HPSupport 1.) screen brightness changes auto. there is no option of turning the auto brightness ... 2.) Wifi drivers are not useful. they do not capture wifi signals.. please tell the solutions
Thanks for the reply. Let's start off by performing Bios Defaults: Turn off the computer and wait five seconds. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings. Press F10 to Save and Exit. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes? Follow the prompts to restart your computer. Here is a link that will help: bit.ly/3OrkJtv Go into your power options. Select Balanced and click Change plan settings. Click Change advanced power settings. Then save setting changes. Binu - Social Media Tech Support
+Anandu Ms This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
My Laptop Model is HP 14-cf3001nx. I don't know what's problem with it. Whenever I use it,my eyes are tired and it turns to headache.😓 It's happening with my sister too whenever she works on my laptop. So we cannot use it frequently just becoz of this issue. Eyes are tired and headache remains till next day.😓 Please help me to overcome this issue. Thanks!
+Muslimah This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
Hi there, thanks for contacting! I understand that you are experiencing a dim display issue on your notebook. In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty. Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html Binu - Social Media Tech Support
Hi Morris, thanks for contacting HP Global Social Media Support! I understand that you are experiencing an issue with the screen of your notebook. I will do my best to assist you. Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3GVtoTL Binu_HP Social Media Tech Support
Hi there, thanks for contacting! I understand that you are experiencing an issue with your computer as you accidently turned the brightness all the way off and now you don't know how to turn it on. I will do my best to assist you. If your brightness does not work with the FN key or your brightness key just doesn't work . Take your phone's flashlight or a normal flashlight . Turn your laptop on and shine the light form different directions until you can see the screen a bit . Then find your cursor and go to the settings to adjust the brightness :) Binu - Social Media Tech Support
We are delighted to hear that it is working! If you need any help in the future, you can always get back to us. Thank you for being a valuable HP customer. Have a wonderful day! Cheers! Binu - Social Media Tech Support
+Techie Rocky Videos Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
+DigitalDevil This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
+sharanya bhandary Follow these steps to fix a dim display on HP laptops with Windows 10: - On the laptop keyboard, press the Increase Brightness function key repeatedly. - If the display is still dim, continue to the next step. - Select Start, type Change display settings, and then select Change display settings or Display settings from the results. - Move the brightness slider to increase the brightness level. - If the display is still dim, continue to the next step. - With the computer on and using the battery for power, plug in the AC adapter. - If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray. - If available, select the brightness button until the desired brightness is achieved. - If your display is still dim, continue to the next step. - In Windows, open HP Support Assistant. - Select your laptop, and then check for and install any updates. - If the display is still dim, continue to the next step. - Perform a hard reset on your laptop. - If the display is still dim, continue to the next step. - Check the BIOS to see if the display is dim before Windows loads. - Turn off the laptop. - Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays. - Press the down arrow key to go to F10 BIOS Setup, and then press Enter. - From the BIOS menu, check the brightness of the screen. - If the display is bright, the issue might be with Windows. - Perform a system recovery or reinstall Windows to resolve the issue.
hi sir i have hp moniter pro display p201 and my problem is that when i play games like among us etc on fullscreen then my game screen become yellow when i play on widowed my game screen fixed i dont know why i cant play games on fullscreen
it works for me. the brightness setting of my loptop has gone useless. I cant decrease the full brightness until the battery often drained quickly. Just turned it off and removed the battery, pressed the power button for 15 times before switching on. It was restored then. Thanks!
+Lloyd Belz Glad to know that your issue is fixed.
I tried a lot but in my case it doesn't work ... My laptop still having high brightness. so please suggest me.
Thank you for this video! My screen brightness dropped very low and all my settings were still at 100%. I did each step in the video until it was fixed. Ultimately it was the bios update that fixed it. I fixed my computer and learned a few things in the process!
+Anita K. Glad to know that the video has helped you fix the issue.
What bios did you check the windows update or go to the hp support thingy
The same with me. Thanks!
what if the briness is not good even in bios?
How to I "overclock" the brightness?
Hi there, thanks for contacting HP Global Social Media Support!
I understand that you are experiencing an issue with the brightness of your notebook.
I will do my best to assist you.
As the issue persist in bios, this seems to be a hardware issue.
In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty.
Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Binu_HP Social Media Tech Support
hye, my laptop brightness keep going up even i decrease the brightness. can i know the solution? model pavilion notebook (15-au103TX)
+Muhammad Nur Faiq Shamsuddin Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
So the Function key brightness overrides the Windows display parameters which were at 100%.. I suppose that makes sense in retrospect as a desktop can't adjust brightness controls on an external monitor. Pointing those out was a big help.
+Stuart Currie Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
My brightness changes according to color of screen for example if I have black screen it decreases and when I open white screen it increases
+Mohamed Tousif Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
Please help!! how do i make the Hp windown 10 deskptop even dimmer, even the lowest brightness is bright for me at night. Thank you!!
+Qilin Xie Please follow the guidelines under this document to fix this issue: hp.care/2rKFmua
There is a night mode you can switch that on.
My problem was, when i disconnected the power, the brightness would drop significantly on battery mode, even when everything was set to high. Here's my solution:
The option not mentioned in the video is to check the settings on your integrated graphics, which is possibly Intel or AMD. Just right click on your desktop and you should see a selection for Intel//AMD settings. Hunt all the options, its buried in there somewhere.
Mine turned out to be AMD's Vari-Bright which was turned on by default. After disabling the Vari-Bright the brightness shot up to maximum immediately. Others will Intel graphics have reported similar success.
Thank you so much :D
This helped me, thankyou!
Thank you soo much bro.. searching for last 2 hours and finally your comment help me.
+PaperGlazed Thanks for sharing the steps that helped you!!
Thank you!
Hello there. Even when I boot into the BIOS of my laptop the screen is still dim, is this a hardware issue?
+Jas C Yes. This seems to be a hardware issue. Please contact our phone support team to fix this. Please follow these steps to reach them.
Step 1. Open link: support.hp.com/us-en/contact-hp
Step 2. Select the product type.
Step 3. Enter the serial number of your device or select let HP detect your product option.
Step 4. Select the country from the drop-down.
Step 5. You should see the HP phone support number.
@@HPSupport wwawcool
my brightness remains same when i press increase or decrease buton and it has no any update what can i do (please reply)
+Tanika Naik This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
And how do you free up disk space because I don't have enough disk space
Hi there, thanks for contacting!
I understand that you are experiencing an issue with the screen and disc space of your computer.
I will do my best to assist you.
Please refer to the instructions mentioned under these documents to fix this issue:
bit.ly/3umNZID and bit.ly/2OY4tXf
Binu - Social Media Tech Support
Well idk what's going on because with my brightness slide it's gray
HP Support Assistant doesnt show any uninstalled updates, but the homepage mentioned in the video does. Should I install all the updates for my device? THX for your help!
+Florian Kleinhans Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue:
Step 1 Windows Updates -
1) In the search box, type and open Windows Updates.
2) Check for updates.
3) If the updates are available, click on install and restart the computer.
Step 2 HP Support Assistant Updates -
1) In the search box, type and open HP Support Assistant.
2) Check for updates.
3) If the updates are available, click on install and restart the computer.
my brightness remains the same no matter what I do, degrees or increases its still the same level of brightness on my screen...
+abutterflypost Go to Start -> Settings -> Update & security, then Check for updates and install any available updates. You might need to update the display driver from the manufacturer of your computers website
Even i was facing the same issue but after restarting my laptop, boom issue is solved.
Thanks. Removing battery for reset did the trick. Not sure what happened?
+Helios Glad to know that the video has helped you fix the issue.
14 seconds in the video and already, I knew how to fix this. The hallmark of a great video: to the point and quick info. Thanks for posting :)
+Melissa Rainchild Glad to know that the video was so useful to you.
Omg thank u so much man I got it thank u so much
For anyone all those steps didnt work for them, i just unistalled my graphic card driver and everything got good again!
+Aymen Haddache I am glad to know that your issue is fixed.
only this worked for me
Is it safe to uninstall the graphics driver?
@@user-bd7xm3ig9q of course
@@peermohamed.m8914 well i uninstall and its dark and i try to fix it
Hi, I have a HP probook, when I click the fn and the brightness key, it doesn't work. But it does work for the volume buttons. How do I reduce/increase brightness with the keyboard keys?
+Aishwarya M Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
At last I did fix it (HP Assistant graphic drivers update worked out). Thank you! My problem emerged when I replaced my SSD with more advanced SSD.
+Denys Zhadiaiev Glad to know that your issue is fixed!!
The screen 0.50 in the video has an extra option on my computer and it helped to uncheck it: "Change brightness automatically when lighting changes"
Hi Bengt, thanks for contacting HP Global Social Media Support!
Thanks for sharing the steps that helped you!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
I Couldn't understand why everything got so pale. Wow. I wasn't connected to the HP assist on the laptop. There was a driver graphics update needed.
+Mel On Demand Glad to know that your issue is fixed.
I’ve got a HP Stream and I can’t find the Brightness on setting and It won’t work even if I pressed the brightness Keyboard
+Soft Finger If you're having trouble with your screen's brightness, use the function keys F2 and F3. The F3 key will be the one to raise the brightness, so press the F3 key until you reach your desired brightness. If this doesn't work, check to see that the F3 key is working by pressing F3 while holding down the FN key.
@@HPSupport i dont have a fn key and i dont see a brightness setting i just see night mode and thats it and it hurt my eye when i turn that on
Do we have the backlight option in hp laptop (intel CORE i3 10th GEN)?
+DILJOT KAUR May I know the complete model number of your notebook so that we can check the details for you?
@@HPSupport HP Laptop 15s-fr1xxx
Product no. 3J105PA#ACJ
Serial no. 5CD032LFFD
Thanks a lot!! Hard reset worked for me!!!
+siddhesh pai I am glad to know that the video has helped you fix the issue.
Thanks! Very helpful. My function keys had been turned off, and I accidentally turned them on, which made the keyboard and brightness all wonky. Simple matter of hitting FN F10. Cheers.
+A F Glad to know that the video has helped you fix the issue!!
How to decrease contrast and saturation in tx0103.. In control panel there is no adjustment colour option
+Nilutpal Das Learn how to change icon size, screen saver, desktop background, text size, and other desktop or display settings in Windows 10 and Windows 7 as mentioned here: hp.care/2rKFmua
It worked after a hard reboot! Thank you! 🎉
Hi Lauren, thanks for contacting HP Global Social Media Support!
We are delighted to hear that the video has helped you fix the issue!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
Thank you for your help, it was killing my eyes!😂
Nice video
But my laptop's do not show brightness icon on the taskbar and do not work brightness switch... How can I solve my problem?
Please help me
+Bapon This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
My screen has a bright circular area in the middle of the screen and the outer part is way darker/shaded?! Any advice?
Hi James, thanks for contacting HP Global Social Media Support!
I understand that you are experiencing an issue with the screen of your notebook.
I will do my best to assist you.
Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3iTLkov
Binu_HP Social Media Tech Support
Hi, How do I keep my brightness at 100% even when unplugged from power?
+JosefTV Goku Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
Min 1:08
Hi, my brightness is dimming automatically when playing video on full screen, (if I'm playing a video in youtube with full screen my brightness gets dimmed) all other times I have full brightness, please give me a solution for this problem, it's very annoying when you're trying to watch a movie or something.
+sooraj s Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
I purched HP15s GR0500au RYZEN 5 model from hp world on 01.08.2021 and I realised after bringing it home that the brightness of this model is very high. I tried to fix the brightness level by adjusting the bar handle in settings but it was of no help.
I tired to turn on the dark mode but it is lighter as compared to my other hp laptop gr0012au RYZEN 5, purchased last month.
The brightness of gr0500au model is very bright and when I dim the brightness it gets very hard to read anything on the screen.
+Swasti Shree This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
Yep it was the power setting all along. Thanks for this vid!
+Trains, Bangs, and Automobiles I am glad to know that the video has helped you fix the issue.
You saved my life bro, I accidentally put it on the lowest so it was pitch black, so thanks!
+Togroz I am glad to know that the video has helped you fix the issue.
Brightness doesn't change when I unplug the power cable. help. win10 6460b
+Anatolij Sergejev Go to Control Panel, Hardware and Sound, Power Options. Click on Change plan settings next to your active power plan. Click on Change advanced power settings. Scroll down to Display, then under Enable adaptive brightness, switch it off for both the battery and plugged in modes.
the best video, Ive watched so many videos and nothisng, this helped me so much
+adrian Glad to know that the video has helped you fix the issue!!
So I bought HP 250 G7 notebook two months ago and since then m dealing with a screen that keeps getting dim and bright on its own!! I ve installed OS all over again and drivers are up to date
+candy kiran Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
My Hp laptop screen dims when any kind of interface with Black or Grey Image comes. I have been facing this issue for the past two months. And no one could resolve the problem. what to do?
+Explore World Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
@@HPSupport I have done all things you mentioned. My last step was Reinstalling the window from HP recovery. I hope you did not get my question. *I said Whenever Dark image comes then it dims.* Which is called *"AMBIENT DISPLAY SENSOR" in laptop,* how to fix that please let me know. Hope I have explained you well to resolve my problem.
@explore world
No worries😂😂
its a normal thing and happens with all laptops
to correct this, just go to intel settings, power option and disable the downside option
@@user-bd7xm3ig9q what is downside option in power option.? And how to disable that?
@@exploreworld07 ok
Hp elitebook folio 9480 brightness key not working problem solutions
+kumararaja kingkumararaja Try reinstalling the HP Hotkey driver on the following link.
h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7089928&swItemId=ob_156452_1&swEnvOid=419...
When the reinstallation has completed, restart the notebook.
Hi I need help...I can't find the brightness slider in my setting as well as in my action centre
+Sharan Shetty This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
When I see any RUclips videos my hp 15s display automatically brightness, please reply how to fix
+sayanjit adak Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
I was tried to search on youtube about this...but the old hp laptops video..this This is new..and I also knew about it... I just forget..thank for the video...
+RENUKA GEEVARETNAM I am glad to know that the video was very useful to you.
DUDE THANK YOU BRO I set my bright ness in 0 now it’s black screen and it’s not my laptop and I watched this video and 12 seconds in it lighted bro thank you ima like and subscribe!
+Ziel M. Macadangdang Glad to know that your issue is fixed.
Thank you! This worked for me 😁
Hi Eugenio, thanks for contacting!
We are delighted to hear that it is working!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
Updated the video driver and it worked. AMD
My laptop screen is very dim. What to do in keyboard sir. Pls reply
+Vidya Praveen This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
Brightness working from display settings well but i want to know why f9 and f10 stop working even i click on fn button
+mahmoud abd elkarem In the BIOS there is an option under the "Advanced" tab, Scroll down to the "Hybrid Graphics" checkbox, and UNCHCEK that box. If you are having this issue, this simple thing could fix it for you. What that does is enable the AMD graphics chip, and when that is enabled it will interfere with the fn-f9/fn-f10 options to dim the screen. If you don't have that option then you don't have dual video chips, and your issue is probably drivers with the video and/or hotkey software.
I've done almost all and problem still hasn't been resolved. My BIOS is dim. I have an in-built battery. Nothing has worked. What should I do?
Hi Mandela, thanks for contacting!
I understand that you are experiencing a dim display issue on your notebook.
In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty.
Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Binu - Social Media Tech Support
Thanks for the help . It is done ❤️
+Hrishikesh Das I am glad to know that the video has helped you fix the issue.
My laptop has a bluish tint to it and the colors from it look very different from my iphone. While this is typical for every gadget, is there anyway to fix this? Digital art is my work, I couldn't work with faded out and or colors that are too contrasted.
+Vermin Meridas Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
PLEASE it didn't work for me..
When I increase or decrease the brightness, the cusor moved but no effect
Hi there, thanks for contacting HP Global Social Media Support!
I understand that you are experiencing an issue with the display as it is dim.
I will do my best to assist you.
Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3GVtoTL
Binu_HP Social Media Tech Support
I can't see the settings plz help i have the photo also which may help you
+Vivek Choudhary Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
My laptop is hp pavilion 360 degrees convertible laptop. I bought it 5 months back. After i updated laptop iam facing a dim screen issue, when i put flash light on the screen iam able to see the screen. But no mouse pointer is available. I can only see my lock screen. Some days i can see the screen full bright and after working for 2 to 3 hrs its automatically turning off. Whats the main issue with these?
+E Jeethendrinee This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
Mine is pitch black i can't see where the mouse is going please assist 🙏🏾
+Elelwani Makhuvha This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
How do I get out of the start up menu
Hi there, thanks for contacting HP Global Social Media Support!
I am here to help!
What seems to be the issue? Could you please elaborate? Are you facing any technical issues with your HP computer?
May I know the computer you are using?
Let me know!
Regards,
HP Support
hey thanks for the tips, but I've got a question not sure if it's related to the matter or not but it is something weird and I need your guide on it if possible. problem is that when I do a photoshop project the output exposure is quiet satisfying but when I send that image to anyone else's device such as mobile devices or other newer model pcs and laptops it's so dark less exposure than it is on my laptop sony vaio f12Hfx 16.4 2010.
+Arses A.R. The steps mentioned under the video are tested on HP computers. We would not be able to comment whether it would work on other brands.
None of these helped. Windows 10 in battery mode has a much lower "max" brightness than it is on AC adapter mode. This settings cannot be changed anywhere. Drivers are all up to date and Windows 10 is fully updated.
How do I force the screen to be as bright on battery mode as it is on AC adapter mode? Both mode has the screen brightness set to 100%, but battery mode is still much dimmer.
+Mika Norén This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
How can adjust colour ful display ?
My display so much white.
+PORASHONA ACADEMY Please refer to the instructions under this document to fix this issue: hp.care/2rKFmua
I face problem immediately after bios update... What to do now
+Asif Khan Please try restoring default in bios as mentioned here to fix this issue: bit.ly/32glFMl
Thanks. I solved my problem by this video.
+Yusuf Glad to know that the video has helped you fix the issue!!
Which way to fix this problem below? :My laptop has max brightness but for some reason it looks like it’s on 68% brightness.
+Hawkins This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
thanks you solve my problem though my laptop is lenova..
+FYK's Information We have tested the steps mentioned under the video on HP notebooks. Glad it worked on your notebook.
From the BIOS menu, check the brightness of the screen?
What if at this step your screen brightness is dim? what do you do then? I wouldn't have bought this laptop is If knew the screen quality was this low. I did purchase this during lockdown so wasn't able to get my hands on one and test it in the shop. Disapointing
+Mike Ashcroft Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
@@HPSupport Yeah I have done all of that but the screen is still incredibly dim. What i am asking is what do if, after the BIOS stage, the screen is still dim. This implies it is now an issue with windows but the laptop itself. Is it an issue with my laptop covered under warranty?
How do i change the brightness on a external monitor? Mine is blindingly bright and there is no brightness slider in settings. The one in the notification menu is greyed out
+Jillian On the Start screen move the cursor to the upper right corner to open the Charms menu.
Click Settings. Figure : Charms menu.
Click Brightness. ...
Click the slider and drag it up or down to adjust the brightness of the screen.
I have low brightness with HP elitebook 6930p
+Cyber Data channel Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
I have HP notebook. Every time I disconnect it from the AC, it dims the display. I could not find the options to get the brightness back. Please help.
+SyZy Gy Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
It automatically change brightness all the time in my case. how to fix it.
+Ãñjãñ shrêsthâ Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
Hello,this didn't help me out.
When I increase brightness of my hp laptop, it gets whiter,and the colours get darker.please help me out,it's very annoying
+Shashwat Mishra Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
Thank you,display settings worked
Hi Jay, thanks for contacting HP Global Social Media Support!
We are delighted to hear that the video has helped you fix the issue!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu_HP Social Media Tech Support
We can upgrade genration of hp laptop Or not plzz reply. Like 4 genration to 5 gen or 10
+SAAD JETHAVA HP does not recommend upgrading or downgrading hardware parts or software that is bundled with the product as It may affect the manufacturer's warranty and performance, however, you could change the configuration at your own discretion.
At a brightness level below 10% my screen turns pitchblack...
+Bybo This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
i just want a moderate display brightness but the issue is that it won't make any difference in display to low(0) or high(100%) the slider. the brightness is so high , what's the issue?
+us official Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
Thank you very much Sir. I have benefited.
+Syed Montasir Hossain I am glad to know that the video has helped you fix the issue.
My problem is not reaolved 😓
Actually when is connect power,the little bit of bottom right part of screen goes bright, otherwise when i disconnect power,whole screen goess veryyy dimmm,hardly i can see the display.... please suggest me the solution !!!
+Shoaib Malik Please refer to the instructions mentioned under this document to fix the issue: hp.care/2oPxHcG
i acidentally turned my brightness to 0 and now I can’t turn it back up. Im panicking, what should I do?
+Shinzaku This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
my laptop isnt so much struggling with dimity, its just whenever i put the brightness up, the whites on the screen get too bright and its like the shadowing and certain details dont show up and the colour seems to be more washed. i dont know what to do about this. ive tried calibrating my colours but when it comes to the gamma part, i cant get it to a place where its not either too high or too low. i have the HP pavilion g6 notebook (maroon), processor is AMD E2-1800 APU with Radeon(tm) HD Graphics 1.70 GHz System Type x64-based PC. I'm also apparently up-to-date with all updates, i thought itd maybe be the driver but apparently not.
+S U J I N X Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
Plz help my computer was flickering before when I moved the screen in a certain position and now it's just dark with brightness fully high
+Mt346 Minecraft Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
@@HPSupport my computer is Lenovo ideapad
verrryy helpful videa. God bless you
+Blue Bird Glad to know that the video has helped you fix the issue!!
Thank you sooooo much for this video. Worked for me
+nancy nnaji Glad to know that the video has helped you fix the issue.
Hello, just got my HP AMD A10 and opened my gmail using this device, unfortunately the status indicator button (Green-for available) can't be changed to this status "Set as away". I can't click it. Hope you can help me with this.Thank you!
Hi there, thanks for contacting!
I understand that you are experiencing an issue in setting away status in Gmail.
I will do my best to assist you.
On your computer, open Gmail. At the top right, next to your status indicator, click the Down arrow . Choose: Automatic, Do not disturb, or Set as away.
Binu - Social Media Tech Support
It's works... thanks for resloving my problem.
+Aman verma Glad to know that the video has helped you fix the issue.
This doesnt fix my problem, whenever i open a different application the screen synchronizes the brightness, light, shadows and everything to the application i am running. Say if i run a movie and the scene is dark, screen changes colors gets darker and if i instantly switch tab to example google sheets, the letters seem very bright and the whole screen. I have changed 4 different laptops so far and i have never had this problem. There is some sort of Auto brightness/gamma/color setting running in the background which i cannot find. Please advise, it is very annoying to my eyes. Thanks
Hi Petar, thanks for contacting!
I understand that you are experiencing an issue with the screen of your notebook.
I will do my best to assist you.
Please refer to the instructions mentioned under this document to fix the issue: hp.care/2oPxHcG
Binu - Social Media Tech Support
@@HPSupport downloading graphic driver from your website helped a lot!! Colors are a little brighter but its better than before thank you
EDIT: after calibrating my screen to the darkest now the image is amazing thank you !!!!
We are delighted to hear that it is working!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
Can you help me? My laptop screen brightness is too low even i am increase brightness using fn shortcut, i am hardly see what's in my monitor, i am using Flashlight on my phone to see it, but still its too dark to see, my laptop is hp omen dh-0105tx
+Reza This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
HP please help me my HP ProBook 4540s screen is showing different colours and the display colours is not proper
+Mohit Shetty Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates -
1) In the search box, type and open Windows Updates.
2) Check for updates.
3) If the updates are available, click on install and restart the computer.
Step 2 HP Support Assistant Updates -
1) In the search box, type and open HP Support Assistant.
2) Check for updates.
3) If the updates are available, click on install and restart the computer.
THANK YOU HP SUPPORT.
+Jonathan Ugege You're welcome.
TNX SO SO SO SOOOOO MUCH
Love ya'll
+TheStefa1991 Glad to know that the video has helped you fix the issue.
Please some one help me. My laptop display brightness is not increase and decrease after installation my windows. What can i do now?
+Alseam Onoy This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: bit.ly/3822cjQ
i have elitebook8570p and there is no brightness control option in windows. updated drivers but no solution
Hi Ali, thanks for contacting!
I understand that you are unable to find brightness control option in windows.
I will do my best to assist you.
Please try the below mentioned steps to fix the issue:
1) Search for Device Manager in Start Menu
2) Expand the Monitors section
3) Right click on Generic PnP Monitor and
4) Click on Enable and you are good!
Let us know how it goes.
Binu - Social Media Tech Support
@@HPSupport 1.) screen brightness changes auto. there is no option of turning the auto brightness ... 2.) Wifi drivers are not useful. they do not capture wifi signals.. please tell the solutions
Thanks for the reply.
Let's start off by performing Bios Defaults:
Turn off the computer and wait five seconds.
Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
Press F10 to Save and Exit.
Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
Follow the prompts to restart your computer.
Here is a link that will help: bit.ly/3OrkJtv
Go into your power options.
Select Balanced and click Change plan settings. Click Change advanced power settings. Then save setting changes.
Binu - Social Media Tech Support
My hp lap half display screen became dim what to do and white spots are appearing in the screen😭 plzzz reply🙄
+Anandu Ms This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
My Laptop Model is HP 14-cf3001nx. I don't know what's problem with it. Whenever I use it,my eyes are tired and it turns to headache.😓 It's happening with my sister too whenever she works on my laptop. So we cannot use it frequently just becoz of this issue. Eyes are tired and headache remains till next day.😓
Please help me to overcome this issue.
Thanks!
+Muslimah This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
@@HPSupport okkk...
Thank You Sir...
Very very help full dear great❤❤
+VERTICAL VIDEOS You're most welcome.
My laptop turned off and then when it rebooted, it looked dim to the point I cant see it. I tried everything and even even the bios is dim :/
Hi there, thanks for contacting!
I understand that you are experiencing a dim display issue on your notebook.
In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty.
Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Binu - Social Media Tech Support
i did all these but it doesn't work. i desperately need help
Hi Morris, thanks for contacting HP Global Social Media Support!
I understand that you are experiencing an issue with the screen of your notebook.
I will do my best to assist you.
Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3GVtoTL
Binu_HP Social Media Tech Support
i need help plz i accidently turned my brightness all the way off and idk how to turn it on because the screen is black
Hi there, thanks for contacting!
I understand that you are experiencing an issue with your computer as you accidently turned the brightness all the way off and now you don't know how to turn it on.
I will do my best to assist you.
If your brightness does not work with the FN key or your brightness key just doesn't work . Take your phone's flashlight or a normal flashlight . Turn your laptop on and shine the light form different directions until you can see the screen a bit . Then find your cursor and go to the settings to adjust the brightness :)
Binu - Social Media Tech Support
@@HPSupport thank u sm!! lifesaver
We are delighted to hear that it is working!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
Unable to fix auto brightness option
+Techie Rocky Videos Please perform updates via Windows and HP Support Assistant as mentioned below to fix this issue: Step 1 Windows Updates - 1) In the search box, type and open Windows Updates. 2) Check for updates. 3) If the updates are available, click on install and restart the computer. Step 2 HP Support Assistant Updates - 1) In the search box, type and open HP Support Assistant. 2) Check for updates. 3) If the updates are available, click on install and restart the computer.
Hey hp I really need help my computer screen is kinda to light even if I go darker
+DigitalDevil This document provides solutions to a variety of problems that can occur with notebook and All-in-One displays such as blurry text, poor video performance, black or white screens, or damaged hardware. Find a section below that matches the problem with your display, and then follow the steps to resolve the issue: hp.care/2oPxHcG
My laptop have dim display I can't display clearly my laptop is hp elitebook 8470p intel core i5vpro is this will work for me shall I try this
+sharanya bhandary Follow these steps to fix a dim display on HP laptops with Windows 10:
- On the laptop keyboard, press the Increase Brightness function key repeatedly.
- If the display is still dim, continue to the next step.
- Select Start, type Change display settings, and then select Change display settings or Display settings from the results.
- Move the brightness slider to increase the brightness level.
- If the display is still dim, continue to the next step.
- With the computer on and using the battery for power, plug in the AC adapter.
- If the brightness increases automatically to an adequate level, unplug the AC adapter, and then click the battery icon in the system tray.
- If available, select the brightness button until the desired brightness is achieved.
- If your display is still dim, continue to the next step.
- In Windows, open HP Support Assistant.
- Select your laptop, and then check for and install any updates.
- If the display is still dim, continue to the next step.
- Perform a hard reset on your laptop.
- If the display is still dim, continue to the next step.
- Check the BIOS to see if the display is dim before Windows loads.
- Turn off the laptop.
- Turn on the laptop, and then immediately press the Esc key repeatedly until the Startup Menu displays.
- Press the down arrow key to go to F10 BIOS Setup, and then press Enter.
- From the BIOS menu, check the brightness of the screen.
- If the display is bright, the issue might be with Windows.
- Perform a system recovery or reinstall Windows to resolve the issue.
thank you my cat keeps sitting on my laptop x
+shelagh ocallaghan Glad to know that the video was useful to you!!
hi sir i have hp moniter pro display p201 and my problem is that when i play games like among us etc on fullscreen then my game screen become yellow when i play on widowed my game screen fixed i dont know why i cant play games on fullscreen
+abdullah waseer Please refer to the instructions under this document to fix this issue: bit.ly/39IhuvW