@@Mako19298 well first assuming you are trying to install onto Fanatec’s Shifter you’re going to need the T-nuts that came with your shifter. Once you have those (you’ll only need 2) you can install your V2 with the spacer provided with your handbrake. you will need to add one of the T-nuts on each side(shifter) of the half you’d like your new V2 handbrake to go. Once you have that done you will be able to mount your V2 in a slanted position like mine. Now if you want the handbrake lever to be straight up. If you look at the lever if held (alone without the base) it kinda looks like the letter “J” with the adjustable groves being at bottom of the letter “J”. You’ll want to install it so that if your sitting in your cockpit the lever looks like the letter “J” from where your sitting. Once your lever is in that position just put it on the last grove at the end of your lever (the grove closest to you) and that should be now in the upright position with your base slanted. I hope this helps explain it to you it was the best I could do since I couldn’t post a photo. But if you have any more questions just comment back here I’ll help you figure this thing out!
@@WilSims184 I know how to install it and I have it exactly like you, but the lever is not as straight as yours, even though I set it as straight as possible. It is slightly tilted backwards
Hello! I have a question: How did you do it that the handbrake V2 body is under the account and the stick itself is straight? I can't do that at home.
@@Mako19298 if I’m understanding your question correctly your asking how did I get my handbrake lever straight with the base slightly slanted?
@@WilSims184Yes
@@Mako19298 well first assuming you are trying to install onto Fanatec’s Shifter you’re going to need the T-nuts that came with your shifter. Once you have those (you’ll only need 2) you can install your V2 with the spacer provided with your handbrake. you will need to add one of the T-nuts on each side(shifter) of the half you’d like your new V2 handbrake to go.
Once you have that done you will be able to mount your V2 in a slanted position like mine.
Now if you want the handbrake lever to be straight up. If you look at the lever if held (alone without the base) it kinda looks like the letter “J” with the adjustable groves being at bottom of the letter “J”.
You’ll want to install it so that if your sitting in your cockpit the lever looks like the letter “J” from where your sitting.
Once your lever is in that position just put it on the last grove at the end of your lever (the grove closest to you) and that should be now in the upright position with your base slanted.
I hope this helps explain it to you it was the best I could do since I couldn’t post a photo. But if you have any more questions just comment back here I’ll help you figure this thing out!
@@WilSims184 I know how to install it and I have it exactly like you, but the lever is not as straight as yours, even though I set it as straight as possible. It is slightly tilted backwards
@@Mako19298 when looking at mine from the side it’s also slightly tilted back. And you’re sure you have it set on the last notch for the brake lever?