How To Install Truck Lettering - Slicks Graphics
HTML-код
- Опубликовано: 19 фев 2020
- Learn to install custom vinyl lettering on your commercial vehicle. Slicks Graphics is an industry leader excelling in designing, building and installing custom high performance fleet graphics. This video provides an opportunity for customer too far from our shop to take advantage of our nationwide service and great pricing to get your graphics for your next fleet graphics project. Check us out online at www.slicksgraphics.com for more information.
- Авто/Мото
Pretty nicely explained, though it's dangerous to lead people to think that level is correct. Sure you can adjust a laser level to be parallel with body lines, but the average viewer won't know that you meant that. Lining up graphics on a vehicle can be simple, but more often than not, it's the difference between a professional looking job and a poorly installed decal.
But I don't mean to be negative. Honestly it's one of the best explanations of the center hinge technique I've seen on RUclips. I'm sharing it with my brother-in-law who purchased some decals from me.
By far, THE best and most straightforward instruction. Thank you for your time.
Hi Tony,
In this application we used a self leveling green laser to set our level line. Stabilo chalk pencils are typically our go to for quick registration points.
Great video. Good to also note that if using a self levelling laser, the truck needs to be on a level surface. Thanks.
Only was I was shown, works great even on 6' window graphics.👍
push pin type thumbtacks work great, if you get a bubble.
Thank you! This was very helpful 💪🏽
Thank you
Helpful. Thanks! 🙏
What type of vinyl do you recommend for dump trucks that carry hot asphalt? I need decals on the body
How long does something like this last??
is an application fluid necessary? i noticed you did not use one.
What is the name of the tape you used?
Is there a preferred temp to make sure the graphic will stick properly, I have to do this outdoors? It felt like summer last week but today feels like winter lol.
The desired temperature is between 60-75 degrees Fahrenheit, however you can preheat the surface if too cold to avoid adhesion issues.
what do you mean when you say 70/30 isopropyl
@@scrapin2010 It is isopropyl alcohol, I just used cheap rubbing alcohol for the final clean in a spray bottle, worked really well too!
That’s correct we use the 70 percent alcohol 30 percent water ratio…down to 50/50 to cut the oils to maximize the adhesive bond to the paint.
I’m trying to do this. It’s 28 degrees and not sticking.
Which vinyl is that? Oracle 651? Thanks 😊
Hello, this is the 751 series, we find it much more convenient for both installations and overall durability.
I'm surprised a video had to be made to do this job of installing a decal. I did this in early '70's and it seems and looks like nothings changed so far
What was the name of the pencil you used?
Chalk pencil
stabilo...they are the best at erasing when you are finished installing the kit.
His flat top is old school 😂
😂😂😂
Is he single?
He have a ring 😅