Firstly, I would like to congratulate them for the excellent work performed to perfection. I would also suggest them to show in their videos how each flashlight works at the end of all the work. Unfortunately we do not have such work performed with such perfection and quality here in Brazil, not that I demean my country, but here we have very serious problems with regard to skilled labor. When we find someone who is minimally qualified and able to perform certain services, they charge exorbitant amounts.
I love it! This makes the retrofit I'm doing to the lights on my 2011 XC70 T6 with mini D2S projectors look hard, which it really has been. Trimming the shrouds and aligning the projectors is not so fun.
I watched all your videos.spectacular informational videos.I made my own car looking at this video.thank you very much for your efforts.good work for you.
Hi Eric, As for now we do not have an installation video for the BI-LED projector or plan to make one, though the installation process is almost the same. If you have any questions on the installation, please dont hesitate to contact us at. info@retrofitlab.com
Hello great job question tho .. I have a s60 2014 non Hid . Now if I do this retrofit and install H.I.D will the car give me a error code ? And will the HID work with out burning the car electronics ??? Thanks
Can you please just do this for my 2010 Volvo S80? I would pay good money for projector HIDs. Unfortunately it's the worst trying to find a pair of OEM
Would you kindly refer me to a sales site that has a good quality xenon kit with a temperature around 4300K? I live in Brazil, so it would be interesting for me a website like Ebay for example. Thank you in advance for your attention!
so I've got a ford fusion with aftermarket headlights and I was just wondering if it would be possible to install bi xenon halo on them or if I'd have to revert to the oem headlights
In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time. Method 2 (this one) is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
These can be used: retrofitlab.com/products/pwy24w-led-amber?_pos=2&_sid=73e7793f3&_ss=r&variant=40348591718552 There should not be any hyperflashing with these bulbs.
+Retrofitlab yes I heard a lot of people who install xenon bulbs just like that. but as I saw your job, which is excellent, I just wanna have your opinion. thank you
Firstly, I would like to congratulate them for the excellent work performed to perfection.
I would also suggest them to show in their videos how each flashlight works at the end of all the work.
Unfortunately we do not have such work performed with such perfection and quality here in Brazil, not that I demean my country, but here we have very serious problems with regard to skilled labor.
When we find someone who is minimally qualified and able to perform certain services, they charge exorbitant amounts.
I love it! This makes the retrofit I'm doing to the lights on my 2011 XC70 T6 with mini D2S projectors look hard, which it really has been. Trimming the shrouds and aligning the projectors is not so fun.
I watched all your videos.spectacular informational videos.I made my own car looking at this video.thank you very much for your efforts.good work for you.
Hi, Great job as always! It can't get more OEM than that.
Please make a step by step video of 2012+ face lifited Mercedes C180.
Thanks in advance!
Really nice looking.
Thanks!
what is the black band which you close the lights?
thanks. really good job
could you please make a video for upgrading to bi led projector?
Hi Eric,
As for now we do not have an installation video for the BI-LED projector or plan to make one, though the installation process is almost the same.
If you have any questions on the installation, please dont hesitate to contact us at. info@retrofitlab.com
Can you made a Video to chanche the Projectors for a Volvo V50 Facelift (2008-2012)?
Hi bro , how u clear the old silicone ? Any good solution with that ???
The best way is to keep reheating it constantly and scraping it with a flat screwdriver. Patience is required as well.
@@Retrofitlab thanks for advise . Ya the old silicone gum really quite hard tough to clean….
Hello great job question tho .. I have a s60 2014 non Hid . Now if I do this retrofit and install H.I.D will the car give me a error code ? And will the HID work with out burning the car electronics ??? Thanks
Can you please make a video for the Ford Focus MK2?
When you are removing material with the dremel, what exactly are you removing? Are these raised portions or are you enlarging the opening?
Can you please just do this for my 2010 Volvo S80? I would pay good money for projector HIDs. Unfortunately it's the worst trying to find a pair of OEM
can you make one for 2008 chevy malibu LS?
And they don't leak after some time right?
Cool mod but i would do an active bending
very nice Sar
Do you have a set of headlights for 2013 xc 60???
Hi,
Unfortunately, we do not sell complete headlight assemblies, only projector upgrade kits.
Would you kindly refer me to a sales site that has a good quality xenon kit with a temperature around 4300K?
I live in Brazil, so it would be interesting for me a website like Ebay for example.
Thank you in advance for your attention!
Can you make one from Punto MK3
does this work on the 2015 headlights? I would like to buy a pair and send to you for my wifes car??
Looks easy :)
Please help me how i can install projector for jetta mk6 - 2011-2016
Please tell me the temperature of the hot air gun? Thank you in advance!
We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
nice work, i've just buy a projetor, but i need to find that glue you put on the headlight.
do you know the name?
butyl rubber glue
I live in America.....would love to do this to my 2016 Volvo V60.....let me know what I need to do?
+Retrofitlab Hi Retrofitlab.....can you give me a price to supply the parts plus shipping to Nevada
so I've got a ford fusion with aftermarket headlights and I was just wondering if it would be possible to install bi xenon halo on them or if I'd have to revert to the oem headlights
Ford Fusion......ha ha ha ha!
Hey what are those red clips called at 6:10 to splice the wires together?
Thanks
Are these still available and ship to the US?
Yes, these are still available and we ship to the USA. With UPS shipping you will receive your order within a week.
How long was the heating fan running and how high was the temperature?
In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time.
Method 2 (this one) is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
@@Retrofitlab Awesome. Thanks for the detailed response!
@@KA7Beatz Glad to help :-)
Which led bulb did you install to the turn signal socket? Is there hyperflash with led bulb there?
These can be used: retrofitlab.com/products/pwy24w-led-amber?_pos=2&_sid=73e7793f3&_ss=r&variant=40348591718552 There should not be any hyperflashing with these bulbs.
ive been trying for ages to separate my s60 2005 headlights.
Ok. Thanks. What effect dö you use on The gun?
I mean how hot do you set the heatgun when putting it in The box.
i made a wooden box (similar to yours), and set the heat to 330celcius for 15min. but it wouldnt come loose at all :(
***** at last i manage to separate them :D the glue on the volvo xenon houses from 2007 seems alot harder than any housing you have video on.
how long do you bake the lights with the heatgun?
8 to 10 minutes at 220 degrees F
Witam jaka LED żarówka do kierunkowskazów
Dziękuję
hi, the projectors of Peugeot 407 can work with bi-xenon? thank you.
+Retrofitlab yes
I heard a lot of people who install xenon bulbs just like that.
but as I saw your job, which is excellent, I just wanna have your opinion.
thank you
+Retrofitlab
The 407 projectors is OK? because they came with halogen bulbs
Yes you can use the standard reflectors if you want.
Don't look like it's worth all that trouble
OGFG....................