Tank looks amazing. Any chance you know the measurements WxLxH. Besides pick up and return line. What you do with the 2 on the right of tank. And top extra ones on the sending unit.
I don't remember off the top my head. Of ypu check rock auto can get dimensions. The 2 lines feed is 3/8 and return is 5/16. The lines I didn't use go to a evap canister but I dont have sp I capped them off
Nice work Joe. I am about to do the same to my C10 but am using a strap as I don't think that the flange on the tank is is going to be strong enough to support nearly 70lb of fuel when full. How are you getting ion with the set up so far? Bald Paul
Everything is working good still. The trickest part was filler neck. The jeeps has a 1in fill so I used a 98 camaro fill neck cause it reduced down from 2in to a 1in and bought some 1in pipe to run it to the inside of the bed behind the rear fender. I been debating on putting straps on it but I haven't seen a need for it yet.
@@Joe_Jackstands I am looking at adapting the Wrangler filler neck to the bedside on mine - really tricky trying to the right parts as when searching Google seems to only be able to bring up 20gallon! Good work, am following along.
@@thegrandpumbaa I think the 20 gallon filler will work. Its the same size hoses. I was looking at them but had a camaro filler setting around so I used that.
Very useful straight to the point video 📹. Thanks
Great video
Tank looks amazing. Any chance you know the measurements WxLxH. Besides pick up and return line. What you do with the 2 on the right of tank. And top extra ones on the sending unit.
I don't remember off the top my head. Of ypu check rock auto can get dimensions. The 2 lines feed is 3/8 and return is 5/16. The lines I didn't use go to a evap canister but I dont have sp I capped them off
Oh ok. Thanks for the reply
I see there are a few different parts numbers for the Kemso. Do you remember which Kemso pump you ran?
Kemso 10912-119 . It's under kemso 1985-1995 chevy blazer on ebay
Nice work Joe. I am about to do the same to my C10 but am using a strap as I don't think that the flange on the tank is is going to be strong enough to support nearly 70lb of fuel when full. How are you getting ion with the set up so far? Bald Paul
Everything is working good still. The trickest part was filler neck. The jeeps has a 1in fill so I used a 98 camaro fill neck cause it reduced down from 2in to a 1in and bought some 1in pipe to run it to the inside of the bed behind the rear fender. I been debating on putting straps on it but I haven't seen a need for it yet.
@@Joe_Jackstands I am looking at adapting the Wrangler filler neck to the bedside on mine - really tricky trying to the right parts as when searching Google seems to only be able to bring up 20gallon! Good work, am following along.
@@thegrandpumbaa I think the 20 gallon filler will work. Its the same size hoses. I was looking at them but had a camaro filler setting around so I used that.