I’ve never met sobi but just from his videos I can tell he’s a down to earth guy he’s always happy it’s great to see everytime I watch his videos it puts me in a good mood
I have not read all the comments and somebody probably already said it but I will say it just in case: Do Not put the magnetic tool/hook holder anywhere near where your legs will be while you are rigging, etc. You WILL end up with a bunch of hooks in your pants, shorts, rain gear, etc. It will happen, and when it does you will be pissed! Great looking boat Bro! Oh yeah, Definitely wear your life jacket and hook up the emergency stop cord every time you start up your boat. You may never need it, but if you do... You've seen the videos. Have fun!
Sobi. Use sterlite shoe size containers from Walmart. Has two latches and is clear. Fits soft plastics perfectly. Only $1.96 per box. I have tons of different boxes for tools, garbage, trailers, senkos, tubes. All kinds of stuff
Nice Rig. I am interested in the avx 1980. Sorry to hear about the Evinrude news. At least their honoring the warranty and parts availability. You have a great boat to be proud of.
Do more research before you purchase one.. They fall apart after 1 year.. seriously,hulls splitting.. Then they won’t respond leaving you with a piece of sh*t basically
Love watching you man. So much fun. Couple things that I have noticed from running my uncle's boat: A rod locker bar can save your life. He has had people break into his boathouse and take thousands of dollars of gear, but the couldn't get into the rod lockers. Always worth it to have a few towels and an emergency blanket in the boat just in case you get stranded or cold and wet. Hypothermia can happen when its warm out. It never hurts to have a cell phone sized portable charger just in case in the little compartment next to the drivers seat. Finally, from a tournament angler, putting your most used plastics the little compartment on the step to the main deck can be a lifesaver. Instead of having to open up the big lockers when you have rods and people on the boat, you can just pop it open and change baits a lot quicker. Hope some of this helps man keep grinding! Waiting for tourney tuesday to come back... 👊 Also I'd name the boat White Lightning
Totally get the "scared" part. Iv'e added LED decking lights, LED compartment lighting to all front compartments, installed live scope system, Garmin EchoMaps on front and dual units at the console with network system to my AVX1980. By doing all of this I have discovered most if not all of the factory conduit in the boat for running wires etc. If you're thinking about doing any of this message me on FB and I can walk you through and share pics of how I did any of it. Tight Lines!
I honestly don’t see why sobi doesn’t have WAY more subs. I’ve met this guy at the 2018 Minnesota (st.paul) ice show and honestly he is one of the greatest guys I’ve ever met. I love this channel and I hope he can keep going !!
Being you’re using the center box for tackle storage already, I took a piece of foam gym flooring tile, cut it to match the front dimensions of the welded supports on the inside of the lid. Using some gorilla glue spray adhesive, I glued the foam cutout inside the lid. It works great for keeping terminal tackle and backup baits really handy. Also, all my spools of line are in a Plano spool storage tub that fits in the port rod locker in that top pocket (where the second console would mount) I’m sure lure lock has something similar for line storage solutions. Lastly, if you have any desire for lit live wells, drill a single 1/8” hole above the overflow drain, run wire from inside the livewell into the battery compartment and mount light. There is power that can be easily sourced close from the anchor light, splice in to anchor wiring and you’ve got lights already rigged on a switch. Well almost lastly, your coin box should have a hole drilled into either the bottom or back of the compartment. Installing an adhesive mounted light in there comes in super handy when getting your stuff put away before blast off. Something else for the coin box, I installed a magnet on the front corners of the box along with some steel washers on the lid. If you ever forget to lock the box after opening it, and take off either down the road or across the lake, it will fly open and the stuff you wanted to keep safe will fly out (ask me how I know!). Putting a magnetic bolt bowl inside the box also helps to keep metal things in place and from being able to fly out if the lid does fly open! Magnets on the step box also work well to keep that lid closed when running across the lake gets a little western! Great video, first time watching but subscribing now!
Always wear your PFD man no matter how uncomfortable it is while driving, my cousin got thrown out of a boat and passed away from not having a PFD on. Great video homie. 👊
Sobi you should get a tackle web for the area right under legs when you sit working on tackle. I have the 10"x12" size it's nice to throw bags of plastic into so they don't blow away and slim so it stays out of the way unlike a hook hanger.
How about all the safety gear that DNR makes you have on a boat like flares, fire extinguisher, air horns, throwable pfds, genuinely curious does nobody really do all that stuff?
I have a black tracker boat and used Mothers CMX ceramic wax. NO JOKE the best thing ever, scum and water spots literally wipe right off looks new everytime
Sobi Loving the new boat make sure your boat canopy is very secure those things do not do very good and when conditions and will blow over very easily.
The aluminum braces under each lid can be easily modded with hooks or whatever attachment method u chose to hang various things from....by the way looking to get that boat...can't wait
I’ve been considering a Vexus. Can’t decide between the 1980 and the 2080. Could you possibly give me an idea of your top end speed out of the 1980? Storage and length are pretty similar, not sure if the extra 50hp is worth the price difference. Thanks
Wowza she’s a beauty! Can’t wait to see you catch some BIG ones! For names I’m thinking.... 🤔 Vanilla ice, White lightening, the chariot, thunderbird, vanilla vex, victor, creamsicle, White rhino, albino al, the albino tiger king, white boat, more to come...
I just got a 94 bass tracker and I try to keep it as mint as possible too. I've tricked it out a bit as well. I added a lowrance ti at the front and rear linked to a motorguide xi5 and added rod storage. The best part about owning anything is making it your own. Especially boats!
Sobi have you considered Velcro to make a couple of your changes. That clam tool would be easy to do, no drilling required. But your boat is pretty sick Sobi. Those small tackle boxes are mint!
What are the interior lights like? Extra lights for night fishing would be on my list. Some color/brightness adjustable light strips under the lip on the side rails would be sweet.
Hey Sobi thanks for the great vids. Ideas for efficiency, Get a label maker. 3/8" wide and label containers on the edge, therefore easier to distinguish what you want. Especially if all containers are on there side facing up. You can buy different colors of labels also. The magnetic bars you bought will typically have 1 hole at each end. If not make one. U can drive a long skinny screw through this hole into your rug anyplace you want. You won't notice the miniature hole if the magnet is removed in the future. Just fluff the rug. Just my 2 cents.
Love the new boat Bud! Harbor Freight sells some pretty awesome Velcro. I'd try temporarily mounting those sweet Clam magnets with that till you know exactly where you want to drill permanent holes. Good luck Pal!!!
Awesome video. I’m in the middle of a boat build so I feel your struggles. Use the boat more and you will find what you like, and what works best for you. I recommend a pink steering wheel cover!
For your magnetic tool holder, instead of that get a chair for on your deck and put little cylinders around the bottom of the chair and you can put whatever you want in there. Then you don’t have to drill into your perty boat
Hey Sobi, I commented on the 1st vid you did with the boat, that I was soon getting a 1980 Center console. Got it last Friday. Had it out a couple times and banged some nice stripers on the fly. I have been operating Sheriff Patrol boats for 25 years, and like you, I was a little "puckered" the 1st couple hours behind the wheel. At least I don't have to vacuum the carpet ( I went with a SeaDek package flooring)
Amazing boat, like you it's a dream boat for me as well. Great work working your way up to your dream layout! It's awesome seeing you grow as a channel and a fisherman
Two things I would suggest trick step on the trailer front get in and out so much easier and second I’m not sure of the name but it’s a magnet strip that attaches to your center rod locker so that you can put unused jigs on.
I remember seeing this guy with peric when he burnt his hand on the oil..and when he first talked you can tell he really enjoys everything he does and the way he is on camera is just welcoming lol dude should be on tv just because the way he talks. Very in debt very informative. very Happy lol new sub for sure
Were you wiping it down with vinegar? That definitely works great to break down hard water spots, but try out Lucas slick mist. With our boats being painted it adds a layer of protection and will break up scum lines with ease.
You can install mesh netting along the walls of the seating area. Then, use that as your 'junk drawer' with all the gear you use frequently but can't find a place for.
Have been watching your works for years now. Even when you were filming for Peric. Awesome work! We can tell from your vids you maintain being a genuine good person. Keep it up. Enjoying the vids
I’m going to be in the Alexandria area May 30th through June 5th with a bunch of guys bass fishing. Would be cool to meet and maybe do a fun challenge or something loser buys the beer !
get a hold of Aaron at Intune and have him get you a Dual Pro Maine voltmeter for your boat. easy and quick way to always see you T.M. and Starting battery Power levels
I suggest taking more consideration to the weight displacement on your boat. If you notice, you have the majority of the weight on the driver side. Plus the weight of you as the driver. Maybe move all your soft plastics to the left side of the middle compartment
Sharp looking boat & love watching the videos. Myself and a couple of buddies do a podcast called The Casting Deck Podcast and it’s all fishing you had mentioned that it’s catch and release in a couple or areas. Is it only for a certain time of year or is it for the full season? Thanks
Love the vids as always Sobi! Great review of the new boat. Out of everything my favorite is definitely the seat adjuster 😂. I’ve never seen that before and it blew my mind. Stay safe out there and tight lines!
Kudos on the pledge to wear the life jacket (and hopefully the kill switch)! I wish the Googan boys and more pros made it a point to wear a life jacket when the big motor is running.
Sobi I'd get some 3m double sided tape to hang your tool holders. I would also suggest F11 ceramic coating for your boat. I use it on my 68 lund and I have no water spots it beads up nice and runs right off!
Hey Sam, what ever happened with the red rocket? I live in MN too and in need of a new boat to fish some tournaments. Unfortunately I can’t buy a brand new Vexus while paying for college lol. If you ever feel generous enough to take me out fishing in that boat let me know! I’d love to fish your lakes and show you the honey holes on my lakes!
I would for sure save up for dual power pole blades. They help help sooo much. Also hummingbird 360 would be a good investment! That or panoptix for da boat!! Love the freakin boat man it’s sick!
What’s the towing capacity on your vehicle? How does it do? Also, do you ever spear waves while fishing not running? Like Tonka on a Saturday type waves
I have the same boat. I feel like all boats are going to have that issue or a different issue. Nothing is perfect but you could always just open your lids when you park the boat like I do most of the time. The only thing I can think of that I would have liked to see in this boat it a tool holder worked into the floor or something. Other than that I love the boat. Got my first ding with in the first week in the form of a rock chip....
You need to get that 1st scratch in it and you will be okay lol sending you a message on Instagram. I have a great mod for your boat since yours and min basically have the same layout.
For plastics storage i have found that bass mafia money bags have saved me so much room in my compartments. They compress well and having those Tupperware boxes kinda suck compared to the money bags.
I’ve never met sobi but just from his videos I can tell he’s a down to earth guy he’s always happy it’s great to see everytime I watch his videos it puts me in a good mood
Hudson Flood I've met him and he's awesome!!
#fact
You are correct. One of the kindest, most considerate, polite guys you would ever meet.
I’ve said it before but this is easily the classiest channel to watch. Love watching it grow
Thanks nick!!!
I have not read all the comments and somebody probably already said it but I will say it just in case: Do Not put the magnetic tool/hook holder anywhere near where your legs will be while you are rigging, etc. You WILL end up with a bunch of hooks in your pants, shorts, rain gear, etc. It will happen, and when it does you will be pissed! Great looking boat Bro! Oh yeah, Definitely wear your life jacket and hook up the emergency stop cord every time you start up your boat. You may never need it, but if you do... You've seen the videos. Have fun!
Ken Brown thanks Ken 👊🏻👊🏻
Absolutely love your vids sobi! Keep up the amazing work. Can’t wait to see what your coming up with in the next few weeks!
Sobi. Use sterlite shoe size containers from Walmart. Has two latches and is clear. Fits soft plastics perfectly. Only $1.96 per box. I have tons of different boxes for tools, garbage, trailers, senkos, tubes. All kinds of stuff
Thanks for the help!!
Sobi hit me up if you ever want to fish. It would be a dream to colab with you. Check your DM’s
You need to put some Gruv Launch Pads inside your center locker lid for your baits. They’re the deal.
Bart barttttyyyyy ♥️♥️♥️
Nice Rig. I am interested in the avx 1980. Sorry to hear about the Evinrude news. At least their honoring the warranty and parts availability. You have a great boat to be proud of.
Do more research before you purchase one.. They fall apart after 1 year.. seriously,hulls splitting.. Then they won’t respond leaving you with a piece of sh*t basically
Love watching you man. So much fun. Couple things that I have noticed from running my uncle's boat:
A rod locker bar can save your life. He has had people break into his boathouse and take thousands of dollars of gear, but the couldn't get into the rod lockers.
Always worth it to have a few towels and an emergency blanket in the boat just in case you get stranded or cold and wet. Hypothermia can happen when its warm out.
It never hurts to have a cell phone sized portable charger just in case in the little compartment next to the drivers seat.
Finally, from a tournament angler, putting your most used plastics the little compartment on the step to the main deck can be a lifesaver. Instead of having to open up the big lockers when you have rods and people on the boat, you can just pop it open and change baits a lot quicker.
Hope some of this helps man keep grinding! Waiting for tourney tuesday to come back... 👊
Also I'd name the boat White Lightning
Awesome ideas thank you
@@sobifishing no problem man!
I have a avx2080 the boat is nice. Handles chop well and fishes good
Thanks for the video. You helped me make my decision. Going from an old 06 Ranger z20 glass boat to the Vexus avx2080. Getting it at in tune marine.
Puppy chow in the boat... 👌Mint👌😂😂😂😂
Totally get the "scared" part. Iv'e added LED decking lights, LED compartment lighting to all front compartments, installed live scope system, Garmin EchoMaps on front and dual units at the console with network system to my AVX1980. By doing all of this I have discovered most if not all of the factory conduit in the boat for running wires etc. If you're thinking about doing any of this message me on FB and I can walk you through and share pics of how I did any of it. Tight Lines!
Thanks Victor!
3m auto trim double sided adhesive tape,Mount that magnet no holes needed,check out th marine for accessories,good luck with the new rig
I honestly don’t see why sobi doesn’t have WAY more subs. I’ve met this guy at the 2018 Minnesota (st.paul) ice show and honestly he is one of the greatest guys I’ve ever met. I love this channel and I hope he can keep going !!
It was awesome meeting you Brady
Being you’re using the center box for tackle storage already, I took a piece of foam gym flooring tile, cut it to match the front dimensions of the welded supports on the inside of the lid. Using some gorilla glue spray adhesive, I glued the foam cutout inside the lid. It works great for keeping terminal tackle and backup baits really handy.
Also, all my spools of line are in a Plano spool storage tub that fits in the port rod locker in that top pocket (where the second console would mount) I’m sure lure lock has something similar for line storage solutions.
Lastly, if you have any desire for lit live wells, drill a single 1/8” hole above the overflow drain, run wire from inside the livewell into the battery compartment and mount light. There is power that can be easily sourced close from the anchor light, splice in to anchor wiring and you’ve got lights already rigged on a switch.
Well almost lastly, your coin box should have a hole drilled into either the bottom or back of the compartment. Installing an adhesive mounted light in there comes in super handy when getting your stuff put away before blast off.
Something else for the coin box, I installed a magnet on the front corners of the box along with some steel washers on the lid. If you ever forget to lock the box after opening it, and take off either down the road or across the lake, it will fly open and the stuff you wanted to keep safe will fly out (ask me how I know!). Putting a magnetic bolt bowl inside the box also helps to keep metal things in place and from being able to fly out if the lid does fly open! Magnets on the step box also work well to keep that lid closed when running across the lake gets a little western!
Great video, first time watching but subscribing now!
Keep your weight in back compartment for bow lift and speed and less used items in back
Always wear your PFD man no matter how uncomfortable it is while driving, my cousin got thrown out of a boat and passed away from not having a PFD on. Great video homie. 👊
This is a really fun video!! Good luck with that boat!
Use velcro to attach that clam jig magnet man that way you can move it around the boat with you and no drill holes needed
Thanks and awesome ideA!!
Sobi you should get a tackle web for the area right under legs when you sit working on tackle. I have the 10"x12" size it's nice to throw bags of plastic into so they don't blow away and slim so it stays out of the way unlike a hook hanger.
How about all the safety gear that DNR makes you have on a boat like flares, fire extinguisher, air horns, throwable pfds, genuinely curious does nobody really do all that stuff?
I have a black tracker boat and used Mothers CMX ceramic wax. NO JOKE the best thing ever, scum and water spots literally wipe right off looks new everytime
You should hot glue the magnet to your boat, so if it doesn’t work out, you can just peal the glue off
Yeet!
Sobi Loving the new boat make sure your boat canopy is very secure those things do not do very good and when conditions and will blow over very easily.
The aluminum braces under each lid can be easily modded with hooks or whatever attachment method u chose to hang various things from....by the way looking to get that boat...can't wait
One of the most underrated youtubers. You deserve so many more subscribers sobi! Awesome stuff!!
Beautiful boat.
My condolences on going with Evinrude
You should add some LED light strips for fishing at night! Loving the new boat!
I’ve been considering a Vexus. Can’t decide between the 1980 and the 2080. Could you possibly give me an idea of your top end speed out of the 1980? Storage and length are pretty similar, not sure if the extra 50hp is worth the price difference. Thanks
Wowza she’s a beauty! Can’t wait to see you catch some BIG ones! For names I’m thinking.... 🤔 Vanilla ice, White lightening, the chariot, thunderbird, vanilla vex, victor, creamsicle, White rhino, albino al, the albino tiger king, white boat, more to come...
I just got a 94 bass tracker and I try to keep it as mint as possible too. I've tricked it out a bit as well. I added a lowrance ti at the front and rear linked to a motorguide xi5 and added rod storage. The best part about owning anything is making it your own. Especially boats!
Absolutely thanks for sharing Josh!
KVD speed bags for plastics are great!
Sobi have you considered Velcro to make a couple of your changes. That clam tool would be easy to do, no drilling required. But your boat is pretty sick Sobi. Those small tackle boxes are mint!
Your outro always gets me pumped!! Great video Sobi
LOL! Like I say.
“Everyone wants the convenience of a boat...without the inconveniences of a boat.”
What are the interior lights like? Extra lights for night fishing would be on my list. Some color/brightness adjustable light strips under the lip on the side rails would be sweet.
How about naming it All Spice that new boats got you lookin so fresh so clean! Plus the colors match!
Hey Sobi thanks for the great vids. Ideas for efficiency,
Get a label maker. 3/8" wide and label containers on the edge, therefore easier to distinguish what you want. Especially if all containers are on there side facing up. You can buy different colors of labels also. The magnetic bars you bought will typically have 1 hole at each end. If not make one. U can drive a long skinny screw through this hole into your rug anyplace you want. You won't notice the miniature hole if the magnet is removed in the future. Just fluff the rug. Just my 2 cents.
You can use command strips maybe to hold your tool holder, so you don’t have to drill.
Love the new boat Bud! Harbor Freight sells some pretty awesome Velcro. I'd try temporarily mounting those sweet Clam magnets with that till you know exactly where you want to drill permanent holes. Good luck Pal!!!
Awesome video. I’m in the middle of a boat build so I feel your struggles. Use the boat more and you will find what you like, and what works best for you. I recommend a pink steering wheel cover!
For your magnetic tool holder, instead of that get a chair for on your deck and put little cylinders around the bottom of the chair and you can put whatever you want in there. Then you don’t have to drill into your perty boat
Thanks Will!!
Hey Sobi, I commented on the 1st vid you did with the boat, that I was soon getting a 1980 Center console. Got it last Friday. Had it out a couple times and banged some nice stripers on the fly. I have been operating Sheriff Patrol boats for 25 years, and like you, I was a little "puckered" the 1st couple hours behind the wheel. At least I don't have to vacuum the carpet ( I went with a SeaDek package flooring)
Congrats on the boat dude!!!! And the sea deck rocks I bet
Amazing boat, like you it's a dream boat for me as well. Great work working your way up to your dream layout! It's awesome seeing you grow as a channel and a fisherman
JB Outdoors thank you so much for the kind words JB!
Two things I would suggest trick step on the trailer front get in and out so much easier and second I’m not sure of the name but it’s a magnet strip that attaches to your center rod locker so that you can put unused jigs on.
I remember seeing this guy with peric when he burnt his hand on the oil..and when he first talked you can tell he really enjoys everything he does and the way he is on camera is just welcoming lol dude should be on tv just because the way he talks. Very in debt very informative. very Happy lol new sub for sure
If you don’t want to drill in just use some 3M products like tape or adhesive to hang the magnet. They have so many great options
Couple of items you still need: a small tool kit, prop wrench, and an extra prop. Great vid as always! Love the sexy Vexy 🎣
I’ll be buying lurelocks soon, seems like a great product. Keep up the great work.
There absolute shit
Were you wiping it down with vinegar? That definitely works great to break down hard water spots, but try out Lucas slick mist. With our boats being painted it adds a layer of protection and will break up scum lines with ease.
BassinWithBuck just regular exterior slick mist ? Or do they have a special one for boats ?
Anthony mahon yep just the regular blue bottle
You can install mesh netting along the walls of the seating area. Then, use that as your 'junk drawer' with all the gear you use frequently but can't find a place for.
Have been watching your works for years now. Even when you were filming for Peric. Awesome work! We can tell from your vids you maintain being a genuine good person. Keep it up. Enjoying the vids
Thanks Gary!
I’m going to be in the Alexandria area May 30th through June 5th with a bunch of guys bass fishing. Would be cool to meet and maybe do a fun challenge or something loser buys the beer !
get a hold of Aaron at Intune and have him get you a Dual Pro Maine voltmeter for your boat. easy and quick way to always see you T.M. and Starting battery Power levels
Fierro 051 good idea!!
Power poles for sure!! They are probably the best investment I’ve put on my boat.
I suggest taking more consideration to the weight displacement on your boat. If you notice, you have the majority of the weight on the driver side. Plus the weight of you as the driver. Maybe move all your soft plastics to the left side of the middle compartment
Get wire cutters and achohol their a must have if u get a hook stuck in you so it doesnt mess up your day on the water
Sharp looking boat & love watching the videos. Myself and a couple of buddies do a podcast called The Casting Deck Podcast and it’s all fishing you had mentioned that it’s catch and release in a couple or areas. Is it only for a certain time of year or is it for the full season? Thanks
Love the vids as always Sobi! Great review of the new boat. Out of everything my favorite is definitely the seat adjuster 😂. I’ve never seen that before and it blew my mind. Stay safe out there and tight lines!
Thanks Colin!!
Interior boat lights for when it gets dark during tournaments
MA Productions totally 👊🏻
Hey Sobi, for the magnetic tool holder, I would use 3M mounts on the white fiberglass strip (the first place you put it).
Good idea!
Look into TackleWebs to mount on the boat near where you sit and prep. No drilling required.
White Lightning Bro!
I'm almost locked in on a Vexus, waiting for the guy to call me back but I might be getting her in the next week or 2!!
I hope you do bro congrats
you need to get yourself a locker bar the goes across your deck. would be tasty to find a boat like with all that inside.
Kudos on the pledge to wear the life jacket (and hopefully the kill switch)! I wish the Googan boys and more pros made it a point to wear a life jacket when the big motor is running.
White rocket! Okay white lightning is good too...
Ick, don't mount that blue Clam magnet plate on the boat. It won't match! Sweet rig Sob!
should add a dry bag for the rain gear or extra clothes! Great video!
Sick looking rig bro! Is that EzCam Post still available? Not seeing a website and it doesn't look like they're active on FB anymore.
Beautiful !
Sick rig!
Sobi I'd get some 3m double sided tape to hang your tool holders. I would also suggest F11 ceramic coating for your boat. I use it on my 68 lund and I have no water spots it beads up nice and runs right off!
Thanks Cory!!!!! These are awesome ideas
I was waiting!
Put GRUV big jig pads or the crankbait holders under the latch of the main storage compartment for staging jigs or just drying them out
Hey Sam, what ever happened with the red rocket? I live in MN too and in need of a new boat to fish some tournaments. Unfortunately I can’t buy a brand new Vexus while paying for college lol.
If you ever feel generous enough to take me out fishing in that boat let me know! I’d love to fish your lakes and show you the honey holes on my lakes!
Good for you for wanting to keep it pristine. See too many guys who get nice stuff and trash it for whatever reason
I would for sure save up for dual power pole blades. They help help sooo much. Also hummingbird 360 would be a good investment! That or panoptix for da boat!! Love the freakin boat man it’s sick!
What’s the towing capacity on your vehicle? How does it do?
Also, do you ever spear waves while fishing not running? Like Tonka on a Saturday type waves
30%off that’s solid. Nice work Sobi.
Try 2way tape for your tool magnet. Nice looking rig
This man doesn’t miss!!!! All he makes is hits! Boat name:Sobis Seahorse/TheSeahorse
Love it!!! 🤘🏼
Love your vids sobi, I also bring my boat to Intune Marine when it needs to be fixed and love that place.
We have 1980 only problem in tuns wants to blow out need to trim down running Lithium batteries light in the real
B
I have one wish........ I would love to see Sobi and Murdo together fishing again. Seems all you guys have broke off and gone in different directions.
Robert Cyr murda and I are planning some trips currently
Great video!!! Love the new ride!! Pretty jealous over here lol!!!
Try the lucas speed wax spray can b used on wet boats its great used it 10 years
White Lightning 🌩
Also pumped to watch tourney Tuesday!
Awesome bud! Have you noticed any of the condensation problems others have said? Name White Lightning 🌩
I have the same boat. I feel like all boats are going to have that issue or a different issue. Nothing is perfect but you could always just open your lids when you park the boat like I do most of the time. The only thing I can think of that I would have liked to see in this boat it a tool holder worked into the floor or something. Other than that I love the boat. Got my first ding with in the first week in the form of a rock chip....
Love that boat man.
You need to get that 1st scratch in it and you will be okay lol sending you a message on Instagram. I have a great mod for your boat since yours and min basically have the same layout.
The galloping ghost
Love the video
You need some Gruv Fishing launch pads to contain some of that junk drawer stuff!
What about boat bumpers to keep dock rash off that new boat?
Good work
Ahh 150hp Thank you 😎👌👌👌
For plastics storage i have found that bass mafia money bags have saved me so much room in my compartments. They compress well and having those Tupperware boxes kinda suck compared to the money bags.
That boat is beautiful!
Sobi you might already have this but I would recommend getting some steer stoppers and transom saver
I need to order those still thank you for reminding me