I did that too, but then my whole entire board fried when I tried to start it again so I just pulled it back out, bought an MSD81, then got it cloned. No issues since
@@ktb_e92 couldn’t be bothered to send my DME out to get cloned. I just went to this Taiwanese electronic shop and I watched the guy do it. Bought the more powerful mosfets for like $14, and paid $50 to get them soldered on. He tested to make sure they all worked, no issues at all. Upgraded twins DAW flow max plus, tuned through doc.
VTT makes a nice crank case breather that I run. It has a nylon ball in so when driving without boost the vacuum sucks the nylon ball down the the engine can maintain proper vacuum. But when boost comes on it blows the ball up & lets the crank case/valve cover breath.
@@Chefn54Yeah I didn’t even notice you were running a breather the first time I watched, I was listening while I was on my phone at the same time & I must of missed seeing your breather. Tonight I was watching misc. videos & your video came on again & this time I wasn’t on my phone, so I said, he has a breather, so I came back on to tell you I seen you were running one. Then I seen you messaged me. My bell on RUclips isn’t showing I have messages? Anyways sorry about that….😂✌🏻🏁
Could’ve got a g80. But i like the aftermarket and capability’s of this platform. N54 manual is also bmws strongest manual trans. E46 manual trans is also good
“No filter cuz I’m not soft” 😂
Shit had me rollin haha. Then the motor blows 🤣it's like car Karma.
🔥🔥
Clean build from under the hood to all around this monster 👍🔥
Sweet build 🙏🏼 I’m beyond surprised your MSD80 has held up as long as it has
May have replaced MOSFETs on it. I did it for peace of mind
I did that too, but then my whole entire board fried when I tried to start it again so I just pulled it back out, bought an MSD81, then got it cloned. No issues since
@@ktb_e92 couldn’t be bothered to send my DME out to get cloned. I just went to this Taiwanese electronic shop and I watched the guy do it. Bought the more powerful mosfets for like $14, and paid $50 to get them soldered on. He tested to make sure they all worked, no issues at all. Upgraded twins DAW flow max plus, tuned through doc.
Simple setup when it wants to work 😭😂
This is wonderful, me in my dead stock 335i.Ill get there someday, first I must address these injectors and gaskets.
Nice build. Looking forward to seeing more content with new setup.
seen this thing alll over tiktok sick seeing it on youtube !
“No filter cuz I’m not soft”😂😂😂
Just saw the race against Dom, really good stuff man. Way to show what these n54’s can do with a little love. Keep it up! 💪💪
That wasn’t my car lol
@@Chefn54 bruh no way the guy in the video had the same sticker and everything 😭😭
@@andrewlitt1591😭😭 nah that’s too funny bro. fr the sticker
Bro i appreciate the amount of time you put into this vehicle, someone needs to give you your flowers now💙🫡💪🏾
Awesome build bro, cheers from Brazil!
VTT makes a nice crank case breather that I run. It has a nylon ball in so when driving without boost the vacuum sucks the nylon ball down the the engine can maintain proper vacuum. But when boost comes on it blows the ball up & lets the crank case/valve cover breath.
Yep i run the m18 breather (has one way flapper) with m18 valve cover and custom can setup
@@Chefn54Yeah I didn’t even notice you were running a breather the first time I watched, I was listening while I was on my phone at the same time & I must of missed seeing your breather. Tonight I was watching misc. videos & your video came on again & this time I wasn’t on my phone, so I said, he has a breather, so I came back on to tell you I seen you were running one. Then I seen you messaged me. My bell on RUclips isn’t showing I have messages? Anyways sorry about that….😂✌🏻🏁
Yea bro please upload more would love to see you drive it maybe a few pulls maybe a quick roll or 2
That hood 😮talk about a powerdome
How has the rear end held up? Any issues?
So clean
Came from Instagram. Clean brotha 🤙🏾
Glad you starting the YT channel 🔥 Got hella potential on here 💪🏾
Awesome build!
Wood trim god💯
nice! what size, brand are the front tires? are you using any spacers? wheel offset? looks perfect
Awesome build... Love it ❤️❤️❤️
You are running no filter or even guard with an upward facing intake pipe? Good luck.
This build is sick
Nice job man with all that done you’re probably above M4 prices though 😅
Could’ve got a g80. But i like the aftermarket and capability’s of this platform. N54 manual is also bmws strongest manual trans. E46 manual trans is also good
Good work bro 🤙🏾🔥
How do you run your oil catch cans?
800whp is crazy. I wonder what your 60-130 time is..
Amazing build! What made you choose reflex light over reflex plus? I’m currently trying to decide how to run e85 for my pure twins.
I already had the gfb for boost control. But now i use mhd dme controlled boost
@@Chefn54 so you don’t use reflex anymore? Just dme/gfb and stock dme to control port? Who’s your tuner?
@@illwil1005 no no. Reflex controls port and dme controls boost. The gfb is just being used as a boost gauge
Where you got them rims from
What failed? How did the motor blow up?
Let’s goooooooooooooooo
Your car is fucken nutssssss , I’m trynna get the same front end as you can you attach a link for your headlights ?
Jdm headlights e90 on ebay
swear i just saw this race the dude in the supra no?
A 6266 making 800 wheel? And weren't you upgrading to a bigger one?
I recorded this video a few months ago this is old setup
@@Chefn54 shitttt what're your goals for the next one?
@@Chefn54 also ported heads would help a ton
@@ak3687😂😂😂ikr like damn
What happened to the motor, where was the failure point?
38psi and leaky injectors
@@Chefn54 Damn man, hope it comes back stronger!
@@JAydUBr6 we back. Check out my instagram Chefn54
We want the s it up crazy driving vid again not this!😡🤣
Stock trans???
yes he said that in the video
No filter cause you’re not soft??? Is that a joke?
Looks slow 🤥
I’m from jersey too bro what’s ur ig ?
Chefn54