Tennant T5 Floor Scrubber - Operations and Maintenance

Поделиться
HTML-код
  • Опубликовано: 9 сен 2024
  • Learn all about the Tennant T5 Auto Scrubber. This particular T5 unit features the ec-H2O Technology that eliminates the need for detergent. The unit creates its own cleaner while using, saving thousands of dollars in chemical over the life of the machine.
    For Service, Click Here: bit.ly/3d1NMk0
    For a Parts Manual, Click Here: bit.ly/2AH2a42
    Looking for a Reconditioned Model? Give us a call at 803-252-0100

Комментарии • 46

  • @KoffinKicker
    @KoffinKicker 4 года назад +4

    How do you operate the lockout? I recently started a position and one of the older employees has the pad pressure and water level locked and does not know how to unlock it. The manual doesn't say anything about it.

  • @florencenewkirk6199
    @florencenewkirk6199 3 года назад +5

    What happens when the dirty water is not pulled off the floor?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  3 года назад

      Hi Florence, the Operator's Manual lists 12 different reasons for poor water pickup. Email 'service@southeasternequipment.net' for a copy of the Manual.

    • @JohnYegres-ii8ts
      @JohnYegres-ii8ts 8 месяцев назад

      Puede ser que el tanque de aguas sucias se encuentre lleno
      O la manguera de subcion este obtruida o el scuigeen este dañado

  • @DjPyro93
    @DjPyro93 4 года назад +4

    Hello. I just replaced the batteries for new ones. 3 months in & the machine slows down & then speeds back up to regular speed again. Also when in reverse it locks itself out if I go too fast or if I suddenly stop it while in reverse. Do you know a solution for this?

  • @JohnYegres-ii8ts
    @JohnYegres-ii8ts 8 месяцев назад +1

    Por favor necesito saber donde estan ubicados y como ponerme en contacto con uds
    Muchas gracias

  • @petezsarr3918
    @petezsarr3918 4 года назад +4

    How many hours of ec2ho use on a regular super market floor before the squeegees need changing or/and flipping over?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  4 года назад +2

      Hi Pete! Most recommend a squeegee rotation between 10-20 hours of use, 3 months, or when streaks start forming behind your scrubber. On a waxed tile or polished concrete supermarket floor, it could be closer to 20 hours. Visit our blog to get the most out of your squeegee blades: blog.southeasternequipment.net/2019/12/squeegees-101-pro-tip-buying-guide.html

  • @ernestdicks6254
    @ernestdicks6254 Год назад

    What makes the water pressure gauge works

  • @jamesthurston3427
    @jamesthurston3427 3 года назад +2

    But how do you drain all of the water

  • @user-fl1jv9cv7z
    @user-fl1jv9cv7z Год назад

    I've got a leaking head. Water keeps draining where my pads go and I can't seem to find a problem. I suspect there's some debris in the line keeping a valve from shutting?

    • @user-fl1jv9cv7z
      @user-fl1jv9cv7z Год назад

      Perhaps a bad solution valve?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  Год назад

      @@user-fl1jv9cv7z Hi James, It could be a number of things. Check the troubleshooting section of your Manual, call Tennant Tech Support at 800-553-8033 or fill our a Service Request Form here: www.southeasternequipment.net/Equipment-Service-Request-s/117.htm

  • @antoniovarillas4290
    @antoniovarillas4290 6 лет назад +2

    Can the 'echo" technology be used to clean auto shop floors? that have grease etc?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  6 лет назад

      Yes it can be. Depending on the level of soil, it may be better cleaned using ECH2O combined with the severe environment option.

  • @mimiichino8426
    @mimiichino8426 2 года назад

    seems the soap pipe is turning darker and isn't lowering none of it to clean , I think its backing up into soap pipe?

  • @chubi143
    @chubi143 2 года назад +1

    When charging this machine do you need a transformer for this?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  2 года назад

      The Tennant T5 comes standard with an on-board charger and an off-board charger is an option. For more information about charging the batteries, consult page 20 of the Operator's Manual. If you need a copy, email us at 'service@southeasternequipment.net'. Thank you!

    • @chubi143
      @chubi143 5 месяцев назад

      What does it mean when only one blinking red light on the battery? Battery been charged overnight

  • @felixberrios8765
    @felixberrios8765 2 года назад +1

    how i can fixt the vacuum

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  2 года назад

      Hi Felix, according to the Operator's Manual if you're experiencing an issue with the vacuum motor not operating, it could be one of the following causes: Squeegee is raised off floor, discharged batteries, faulty control board, faulty vacuum motor or wiring, or worn carbon brushes. If you would like to have a technician come inspect your scrubber, please fill out our Service Request form here > bit.ly/3d1NMk0

  • @Ryuko-qj9rq
    @Ryuko-qj9rq 3 года назад +1

    How do I raise the brush head off the floor please?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  3 года назад

      Use the 'brush pressure decrease button' on the control panel. For a copy of the Operator's Manual, email us at service@southeasternequipment.net

  • @Michael-xl8dz
    @Michael-xl8dz 4 года назад +1

    I need a key for this machine were can I find one

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  4 года назад +2

      Hi Michael, more than likely, you would need Part# 1017696 which you can order on our site. Just to make sure we have an exact match, call us with your serial number and ask for the Parts team. Our number is 803-252-0100. We look forward to speaking with you!

  • @julioarmendariz8102
    @julioarmendariz8102 4 года назад +1

    Water is not coming out when I use the machine . Can you tell me what things to check

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  4 года назад

      Hi Julio, if there is little or no solution flow it could be a number of things including an empty solution tank, clogged solution tank filter, discharged batteries, clogged solution valve, or faulty control board. Contact us at 'service@southeasternequipment.net' for further assistance.

    • @loumason9932
      @loumason9932 Год назад

      Vacuum won't work

  • @loumason9932
    @loumason9932 Год назад

    What if vacuum is not working

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  Год назад

      Hi there, Page 38 of the T5 Operator's Manual lists four possible causes for an inoperable vacuum motor. For a copy, please email us at

  • @jrizo22
    @jrizo22 2 года назад

    Can it pick up floor stripper?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  2 года назад

      Yes, although that can ruin internal components if not done correctly. A better machine for that job is a wet/dry vacuum.

  • @awesome_one_9340
    @awesome_one_9340 3 года назад

    What happen if the battery is totally discharge

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  3 года назад

      If the scrubber is completely dead, you may need to trickle charge the individual batteries to a level that the charger can read and turn on to complete the cycle. If this doesn't work, you can fill out a service request form on our website. Thank you and good luck!

    • @awesome_one_9340
      @awesome_one_9340 3 года назад

      How do we kno battery is fully dead...??

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  3 года назад

      @@awesome_one_9340 The machine would not turn on and would not respond to charging normally.

    • @awesome_one_9340
      @awesome_one_9340 3 года назад +1

      Tnkz

  • @SRT8U1
    @SRT8U1 4 года назад

    The brushes will not spin, what could be issue? Everything else seems ok.

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  4 года назад

      Hi Gerald, if everything else seems okay, it could be something more serious like a faulty switch or control board. Please contact our Service Team at service@southeasternequipment.net for further assistance. We look forward to hearing from you.

  • @chriswilson794
    @chriswilson794 2 года назад

    Why is it leaving streaks

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  2 года назад

      The most likely reason is the squeegee blades. Try rotating them or purchasing new ones. It's also a good idea to verify you have the right type of squeegee (i.e. gum, linatex or urethane) for your floor type. If you need additional assistance, email us at

    • @JohnYegres-ii8ts
      @JohnYegres-ii8ts 8 месяцев назад

      Jefe necesito por favor conversar con ud