55 Chevy 4 link final assembly and motor mount and transmission crossmember install!
HTML-код
- Опубликовано: 18 окт 2024
- #55chevy #badbolt #elcamino #caballero #tbucket #roadster #350sbc #project #beginner #satisfying #teaching #student #beast #vroomvroom
santasworkshop64@gmail.com for merchandise!!
T Shirts Xsmall-XL$25 2X up $28 Shipping $5 per item
3" sticker $5
Hats $25
Shipping $5 per item
It's time to hire Santa!!!
www.northpolecalling.com
Santa's Workshop
P.O. Box 514
Stratford, Ok 74872
www.rockabillygoatmilksoap.com
Music:
Twin Musicom-We Wish You A Merry Christmas
Midnight North-Jack's Garage
Ethan Meixsell-In The Shadows
Dan Lebowitz-Get Yer Glow
Dan Lebowitz-Still Want It
RKVC-Burlesque Heartache
Your face when your grandkid tells you stuff, priceless. Keep on going with you projects, once they are finished I suggest to do 'built in minutes' cuts, they will gain views in the 6 digits range. 🏆
I always know it's a good day when I watch the Santa at work AKA Master Craftsman
all ways good to see a Santa that no how to work on cars from ground up, thanks 😁😁😁.
I like how you made the motor mounts and the trans mount look factory stock mounted
61 days until Xmas wooo. Great video Santa Michael. Can't wait to see you as Santa.
Good Seeing You Michael With Your Amazing Work Good Sir..
Good to see the new rear end bolted in place, motor mounts located and reinforced, and the transmission cross member in place. Mr. Jim is going to have a very sorted ride when you get done Santa. I understand completely about the videos and the season. Looking forward to seeing Santa in action. Take care and thanks for the videos.
Thanks for the updates,great video.Be safe Mike!!!
the face on your grandkid, reminds me of my grandson.
W😳W! Mr. Jim is going to get one ho Ho HOT present when you Get Er Done👍 It’s great to see you getting better Mike😊 Just a shout-out: “C’mon people, let’s get this channel over 20K subscribers by the end of the year‼️”
👍😁👍
You should have made the T-bucket into Santa's sleigh 😉
A lot of projects, Michael 🥵 But most of us are patient, and we'll be here when you're able to share. 👍🇺🇸
Always great to check in and see what Santa is up to.
Enjoy the Christmas Season Santa Be Safe and MEERY !!!
This channel is getting to be my favorite. Michael does it all and does it well and you will always learn something from his videos. I am looking forward to the next one.
The 1955 is coming together like coffee and cream. Love the, "It was in my hand, hammer." There isn't one person watching that didn't understand that. Happy Christmas Season to you and your family.
Hey Mike Of Santa's Workshop
These vehicles are going to be TREASURES when you get done with them. The Cabellaro is going to be a modern day Santa's Sleigh when you are done with it !!!
You do very amazing work Mike at Santa work shop .
Hello Mike aka Santa's Workshop. I'm sorry that I'm just now watching your video because I missed seeing the notification on my phone. I'm glad to see you doing good. Also getting things done on some of your projects.
Awesome video, always waiting for the next one. Santa in jeans 🤔, and then the shorts was back on 👍. Me myself using shorts from April to November. It's 50 degrees Fahrenheit in the part of Sweden we're I'm living right now. 👍❤👍
My kind of weather!
@@SantasWorkshop 👍🎅
This is awesome! It's the only channel that I know of that does everything, bodywork, mechanical work, restorations, rebuilds, etc. I feel that I learn something new from every video that I watch on this channel and the man behind it all is Santa himself! Ya just gotta love that! :-)
WE understand Santa Mike! This time of the year is very busy for you! You put in a lot of hard work in. I am glad you have a elves to help! Your videos are always great! Thanks so much for entertaining us all! Merry Christmas to you all in Oklahoma! And God Bless!
Gifted and talented to be sure !!! Always a joy to watch.
That flowmaster setup sounds amazing! I have the same on my 95 gmc Sierra. Its slow but it sounds fast! Love the videos Santa. Keep them coming!
Looking good Mike.
KEEP ON KEEPING ON !!!!!
@Santa's workshop much support as always
Look at that 1st .. good job santa that's going to be one sweet ride when she's all done. Good job 😁
4 link is looking good. 😎👍🇨🇦
Hi I’m cash one of mr hames students love your videos
Hello Cash! Welcome to the channel! Tell Jeff hi for me!!!
You’re doing an awesome job!
VERY GOOD WORK THERE IMPRESSIVE...
Nice job, Mike. That's a ton of grueling work most can't or won't do. And still have the drivetrain to go. Maybe get to do the suspension one of these weeks. Need a camera operator.
Good video Micheal, your the man
Thanks for the update Mike. It still looks like you've got too many balls in the air at one time. But it's your life and $$. Take care.
Got to have enough to keep the content going! With the way parts are getting I would be sitting more than working with only one or two!
Great video. I understand the one bolt thing, I had the same thing happen with my power steering line off my parts car twisting off. Delayed the engine getting its front dress lol. I am shocked that they didnt include grade 8 bolts for something so critical.
I agree with you on the higher gears. They cruise so much better. My 86 Dodge pickup daily driver has 2.94s and a simple lockup 3 speed. She cruises right on down the road and it comfortably can go cross country without hesitation.
Looks like it's coming along good
Doing a great job
Back in the day I found that reamers worked best for holes in frames, you want the bolt shoulder to fit snugly in the hole. That may not be as critical for automobiles as big trucks, the reamers will not catch. Just a little know how from an old guy.
I used those many time when I worked for Freightliner!
You should do a special Christmas cars and cocoa dressed as Santa and have a sleigh I think it would make an awesome event You guys dont really get snow anyways do you?
No worse feeling in the world for a mechanic than the feeling of tight tight tight loose...lol
Sad but true.
What was sad about it it never got tight!
😁👍
Hello Mike
👋
Hey Mike great channel
been watching since the
start.Great videos. Hope
your channel keeps growing.
Thank You!
Where do I find out about santa's costs and what he will do
Email me at santasworkshop64@gmail.com and tell me location and what you have in mind and we can discuss it!
🎅👏👍👊🙏
The bolt passed the drop test eh? didn't break
No but it dented!🙄
Man you look like my wife's dad are you kin to the many family
Not that I know of, I do have many evil twins out there!!😜
You better not. We just rebuilt that turbo for my diesel.
🤣🤣🤣
No Mike that is not normal on any trans
I didn’t think so but when unsure ask!
Not normal on the trans,and the intake is pronounced Why-and NOT WEE-AND just saying
Being in Oklahoma the only way I ever heard it said was weeand.
Ok this really makes Zero Sense.. Taking off a nice Dual plane Manifold and installing a single. Instantly killing your low end torque and with the rear in the truck now its a total waste... The truck the engine came out of was built purposefully.. 4 speed od trans with higher gears. If anything you should also be swapping in the other rear if its not busted... Single plane and a highway gear... A kid on a tricycle can beat you at the stop sign...
No 4 speed and dual plane has a couple of stripped holes. Both tear axles have the same ratio. Going to be a nice sounding cruiser not a racer.