Thanks bro, it's definitely an improvement over the original bumpers, now I will have to do a Victor's testing to see if the approach and departure angle has improved. Really appreciate you watching and commenting thank you 🤜💥🤛
I actually haven't done anything to them yet as I still want to do a comparison video between the two, but I have got a lot of parts sitting out to go on So very soon I will get onto the high Trails 😅 Glad you like the video and I really appreciate the feedback and support 😊 Thanks bro
Olá e muito obrigado António 🤜🤛 Agora é que já não falta mesmo nada para ela ser só Injora 😅 Mas até agora as peças todas foram feitas com boa qualidade Comparando a quando começaram a empresa a qualidade melhorou bastante. Como sempre amigo Antônio muito obrigado por assistir e comentar no vídeo 🙏😁
I have the same bumpers and I am thinking of adding a ramp extension so the front clip can slide into position instead of sticking your finger under to manipulate the clip. Also, would love to add a power switch. Keep up the great content!
Hi bro 👋 Awesome I do like those bumpers it's just a pity because of the clip system!! It really doesn't make it that easy to get it on and off. But I guess sometimes you go to sacrifice functionality for the looks 😅 I put a power switch on my Bronco to be able to turn off the bumper lights and light bar on the roof. I truly appreciate it bro thank you very much for watching and commenting ✌️😉
Great video! Yes, it's a bit tricky before you figure out how to get the clip in the front. But once you get the hang of it, it works fine. As we stated earlier, we chose the same bumpers, and I am very happy with mine. Love your Defender! It looks really great
Thank you my friend I really appreciate it 👍👍👍 Definitely it's a bit tricky but like you say once you get the hang of it it's not that bad. At least the body is not unclipping like it did with the original bumpers! It's a little beast of the machine and I'm really happy with the way it's turned out. Thank you very much for watching and commenting 😄
@@martinwinterman3891 You can push the locking clip forward at the same time as putting the body on. Start by putting it there at the front, and have the rear end of the body raised a bit.
I ended up putting two springs in the back-right shock! As soon as I get a chance I will make a video on it. I have been so busy working on my real vehicles as they all decided to break down. Just finishing off the last one today hopefully tomorrow I'll start on some more videos and I'll start with this video that you want 😅
I was wondering whether you ever installed the injora 4M-88 bumper on a defender. after mounting can't seem to fit the body shell on it anymore due to the fake winch and not sure how to get around it.
The bumper you see in this video has the same problem that you mentioned. It is very difficult to get the body on especially the front clip due to the design of the bumper. It's definitely difficult and it takes a little bit of getting used to how to get it to clip in the front! I have been looking for a solution for this and have just ordered a grill to replace the grill on the defender with the winch. I will do a video on it soon, hopefully that will sort this issue out because it is very annoying. So stay tuned I will be working on that video next 😉
Ik thx for the answer was also looking into this now as a solution but is a bit sad. For the moment I was also going to remove the bullbar part of the bumper untill I find a workable solution. So looking forward to the new movie
Thank you, and yes definitely better approach angles with these bumpers! I see they also got another one available that's recently available on there site.
Congrats on 3000k subs man👊 Have you done anything to your f150 ranger high trail else? I've done a few things to mine. Light kit, rollbar led lights, and ess dual sound system will be here shortly. Hey, whatever you do to celebrate 3000 subs, I'll watch. Continued success brother.
Thank you so much bro! No I haven't done anything to the F-150 High Trail I've got lots of parts sitting here waiting to go on Going to see if I make time to get stuck in! I really appreciate you watching and commenting 🤜💥🤛 Thank you very much.
Yes bro I am South African! But I left when I was 8 years old, and never had a chance to learn how to read and write Afrikaanse But I was still able to read your message 😁🇿🇦 I have finally gotten to the Last stages of my Defender build, so check out the playlist for the Traxxas TRX4m Defender, you might find quite a few things there that's interesting. It is so awesome to see that my videos are reaching my home country! Thank you for watching bro and I really appreciate the comment! I definitely hope to see you again 🤜💥🤛
Thank you so much for the support bro 🤜🤛 I'm trying my best so I appreciate your comments very much 😊 And yes you quite right my cockatiels don't let me do anything without them telling me have been not happy with my attention being off them😅 🤣
Super vidéo comme d'habitude 👌
Thank you so much my friend😊
I truly appreciate your support
🤜💥🤛
Great job. These bumpers suit very well.
Thanks bro, it's definitely an improvement over the original bumpers, now I will have to do a Victor's testing to see if the approach and departure angle has improved.
Really appreciate you watching and commenting thank you 🤜💥🤛
Just bought the front bumper. Your tips and install videos will help. Thanks.
I would love to see what you have done with the TRX4 High Trails!
I actually haven't done anything to them yet as I still want to do a comparison video between the two, but I have got a lot of parts sitting out to go on
So very soon I will get onto the high Trails 😅
Glad you like the video and I really appreciate the feedback and support 😊
Thanks bro
Hello,
Looks good, is already a piece of jewelry!👍
Greetings Seven🖖
Hi my friend 🤜🤛
Definitely! 😅
Thank you for always watching and commenting on my videos Seven
Greetings Ryan 🖖
@@rcfungames 😃🤩👍
Always enjoy watching your videos very informative and everything love the bumpers they look nice and sleek
Thank you I really appreciate the support, I definitely think the front bumper will have a better approach angle.
🤜💥🤛
Saw that Injora sells aluminum brackets for the bumpers now.
Thanks, will go check them out🤝
Awesome video brother! And an awesome way to give instruction on completing the installation! ❤❤❤💯
Thank you brother 🤜🤛 I really appreciate it 👍👍
🇵🇹🤜💥🤛🇺🇲
Mais uns belos up-grades da Injora!!! E ficam mesmo muito bem!!!
Olá e muito obrigado António 🤜🤛
Agora é que já não falta mesmo nada para ela ser só Injora 😅
Mas até agora as peças todas foram feitas com boa qualidade
Comparando a quando começaram a empresa a qualidade melhorou bastante.
Como sempre amigo Antônio muito obrigado por assistir e comentar no vídeo 🙏😁
@@rcfungames 🐼A Marca está a mostrar um bom trabalho sem duvidas, eu estou muito satisfeito com as Jantes!
I have the same bumpers and I am thinking of adding a ramp extension so the front clip can slide into position instead of sticking your finger under to manipulate the clip.
Also, would love to add a power switch.
Keep up the great content!
Hi bro 👋
Awesome I do like those bumpers it's just a pity because of the clip system!! It really doesn't make it that easy to get it on and off.
But I guess sometimes you go to sacrifice functionality for the looks 😅
I put a power switch on my Bronco to be able to turn off the bumper lights and light bar on the roof.
I truly appreciate it bro thank you very much for watching and commenting ✌️😉
Great video! Yes, it's a bit tricky before you figure out how to get the clip in the front. But once you get the hang of it, it works fine. As we stated earlier, we chose the same bumpers, and I am very happy with mine. Love your Defender! It looks really great
Thank you my friend I really appreciate it 👍👍👍
Definitely it's a bit tricky but like you say once you get the hang of it it's not that bad.
At least the body is not unclipping like it did with the original bumpers!
It's a little beast of the machine and I'm really happy with the way it's turned out.
Thank you very much for watching and commenting 😄
Can you tell what the way is? Because my front doesn’.t clip in because the winch that is on the body rests on the new bumper
@@martinwinterman3891 You can push the locking clip forward at the same time as putting the body on. Start by putting it there at the front, and have the rear end of the body raised a bit.
@@T.M.J.N thanks i’m gonna try that
I can know what you did about the torque twist on the shocks ? Nice video
I ended up putting two springs in the back-right shock! As soon as I get a chance I will make a video on it.
I have been so busy working on my real vehicles as they all decided to break down.
Just finishing off the last one today hopefully tomorrow I'll start on some more videos and I'll start with this video that you want 😅
Where did you get all of those sponsor decals/stickers? I'm only finding the 1/10th scale ones online.
Hi
I get them custom-made from hello cool guy that has business on Facebook here in Portugal
Here is a link.
facebook.com/VH1980Grafics
I was wondering whether you ever installed the injora 4M-88 bumper on a defender. after mounting can't seem to fit the body shell on it anymore due to the fake winch and not sure how to get around it.
The bumper you see in this video has the same problem that you mentioned.
It is very difficult to get the body on especially the front clip due to the design of the bumper.
It's definitely difficult and it takes a little bit of getting used to how to get it to clip in the front!
I have been looking for a solution for this and have just ordered a grill to replace the grill on the defender with the winch.
I will do a video on it soon, hopefully that will sort this issue out because it is very annoying.
So stay tuned I will be working on that video next 😉
Ik thx for the answer was also looking into this now as a solution but is a bit sad. For the moment I was also going to remove the bullbar part of the bumper untill I find a workable solution. So looking forward to the new movie
Hi Ryan what size did you use for you defender? I think my tires is too big that is why I am having rubbing issue with the tires and fender
Hello, yes the arches on the defender aren't very large, so the biggest size you can run is 58mm
Thanks for watching 🤜💥🤛
Thank you Ryan keep uploading your defender helps me with your informative videos about RC@@rcfungames
Nice vid, does the front bumper gives a better approach angle?
Thank you, and yes definitely better approach angles with these bumpers! I see they also got another one available that's recently available on there site.
@@rcfungames thank you!
Congrats on 3000k subs man👊 Have you done anything to your f150 ranger high trail else? I've done a few things to mine. Light kit, rollbar led lights, and ess dual sound system will be here shortly. Hey, whatever you do to celebrate 3000 subs, I'll watch. Continued success brother.
Thank you so much bro! No I haven't done anything to the F-150 High Trail I've got lots of parts sitting here waiting to go on
Going to see if I make time to get stuck in!
I really appreciate you watching and commenting 🤜💥🤛
Thank you very much.
Is jy n Suid Afrikaner. Ek begin nou my Defender bou.
Yes bro I am South African! But I left when I was 8 years old, and never had a chance to learn how to read and write Afrikaanse
But I was still able to read your message 😁🇿🇦
I have finally gotten to the Last stages of my Defender build, so check out the playlist for the Traxxas TRX4m Defender, you might find quite a few things there that's interesting.
It is so awesome to see that my videos are reaching my home country!
Thank you for watching bro and I really appreciate the comment!
I definitely hope to see you again
🤜💥🤛
Diggin your channel quality. Good job.🎉 keep up the good work for Us in the RC community. ( tweet goes the bird😮🕊🦜)
Thank you so much for the support bro 🤜🤛
I'm trying my best so I appreciate your comments very much 😊
And yes you quite right my cockatiels don't let me do anything without them telling me have been not happy with my attention being off them😅 🤣