I have the wires that are disconnected from the airpods, it no longer works! I would like to know where to solder the blue wire and the green wire? THANKS
Thanks a lot for your video, i could repair my airpods. But your videoquality could be better for me. It was not easy to see where you stick wich cable to. But thanks again.
I don't have anything to solder, could tape work? Also where do I connect the white and blue wires? Could i send you a picture and where would I send it?
Is the outer mesh connected with wires? My left airpod fell on the ground and I can see a slight damage on the mesh. When I touch it doesn’t feels slim as the right airpod.
you may need to check the color and match it with speaker and power, only black and red goes to the battery rest goes to the mic and speaker, the best solution to find is to check the residue
First..you are amazing! few things. I've seen other videos, one on ifixit for 'authentic' Airpod pros has different components, yours is the like another for a 'clone' I've seen on youtube and not a real Apple airpod pro. Just thought I'd note that. Actually I bought a clone and one of the Airpods came apart when I was trying to change the ear insert and green (antenna) and blue (speaker) wire pulled off of the little half moon circuit board that the blue and white speaker wires are attached to came off of the speaker. I don't see that board on yours as you seem to solder the speaker wires right on to the metal speaker (correct). So I need to see where to solder the green antenna wire (might be able to figure that out), but most important I also need to understand how the speaker wires are attached in my airpods that may be different than yours. As mentioned mine are soldered to a little half moon shaped plastic board that is not longer attached to the speaker. Is this plastic board that my speaker wires are soldered to to speaker too or just just glued to the speaker back or some other connection that cannot be repaired. Your video is so excellent (whether its for an authentic airpods pro or a clone...you can see an authentic on on ifixit) it would be great to have this additional detail...perhaps mine is a little different in that the speaker wires are not soldered on to the speaker directly but onto a little moon shaped board...You can also see black fabric that is adhesive to the speaker and may have been under or over the moon shaped board. Can I uplaod a picture here or can I sent you one via email in case you may be interested in helping provided additional expertise. Be well. and Thanks.
oh..i relooked at your video and think I can see where the green antenna wire goes on the little board. I also see you do have the half moon board (with white and blue wires) on the speaker too, i just don't know if you can or if or how you can reattach it to the speaker. If not I can't fix it..but if so, you are a miracle worker and I'll put it back together with gratitude!
I see mine is a little different in that it has round magnet...but still not clear how the speaker wires are attached (via a board?) to the speaker...what i need to know:)
@@riskyamanullah7251 did you mean the rectangle board that is in the other airpod stem (my speaker wires are still attached there) or the half moon board that is on the speaker? my half moon board came off the speaker but wires are still attached and I'm trying to figure out if its just adhesived to the speaker or some other connection. Glad to email a picture if you have figured this out:) Peace.
Jo magnet se issue aaya wo mera airpod girne se aa reha h apple airpod wo case me sahi se fir nehi ho reha jisse na charge ho pa reha plz ispe video banye
Yeah, Same, my right Airpod disconnected from Both this red n black wires and now idk really know what else to do to on how to fix it cause I was always used both sides of my Airpods and now I don't even know how anymore now :(
Hello Mohan Sir, I am too much happy that I found your video to connect all wires While removing buds my wire gots broken now I want to connect wires can I get your gelp
I agree, but I have some like it for free...there are videos of authentic (ifixit) and clones like this one (youtube) just search and see...I'd still like to fix the clone, it was working really well..even spacial sound and noise cancellation worked well...but I couldn't change the ear plug and that's how I broke a few wires and the board came off the speaker which I'm trying to figure out how its attached...any info appreciated:) love projects like this but need some more info:) see above if you like.
I fixed mine. You have no idea how much i appreciate you thanks very much
Thank you and wish you all the best
For me my white wire is disconnected is this the wire which provides sound because I’m unable to hear sound from my right AirPod
Hi, Kindly try to connect with the speaker after the visual inspection.
Exactly what happened to me right now smh
How did you fix it?
I have the wires that are disconnected from the airpods, it no longer works! I would like to know where to solder the blue wire and the green wire? THANKS
is there a pic? so easy to refer
Thanks a lot for your video, i could repair my airpods. But your videoquality could be better for me. It was not easy to see where you stick wich cable to. But thanks again.
Thank you for the feedback
I don't have anything to solder, could tape work? Also where do I connect the white and blue wires? Could i send you a picture and where would I send it?
Tape will come out easily use of hot glue
What If you dont have a soldering thing
That helped so much thank you!
more welcome Thank you
Is the outer mesh connected with wires? My left airpod fell on the ground and I can see a slight damage on the mesh. When I touch it doesn’t feels slim as the right airpod.
Hi, there was no connection to the mesh, may be the speakers would got damaged
How to solde them i mean there are three wires so which wire shoul solde to it
you may need to check the color and match it with speaker and power, only black and red goes to the battery rest goes to the mic and speaker, the best solution to find is to check the residue
My antena wire breakdown and its not working and sound flickers will the problem be resolved after shoulding the wire with antena
Same Question here
Bhai mera bhi green wire break hua h kaise thik hoga
First..you are amazing! few things. I've seen other videos, one on ifixit for 'authentic' Airpod pros has different components, yours is the like another for a 'clone' I've seen on youtube and not a real Apple airpod pro. Just thought I'd note that. Actually I bought a clone and one of the Airpods came apart when I was trying to change the ear insert and green (antenna) and blue (speaker) wire pulled off of the little half moon circuit board that the blue and white speaker wires are attached to came off of the speaker. I don't see that board on yours as you seem to solder the speaker wires right on to the metal speaker (correct). So I need to see where to solder the green antenna wire (might be able to figure that out), but most important I also need to understand how the speaker wires are attached in my airpods that may be different than yours. As mentioned mine are soldered to a little half moon shaped plastic board that is not longer attached to the speaker. Is this plastic board that my speaker wires are soldered to to speaker too or just just glued to the speaker back or some other connection that cannot be repaired. Your video is so excellent (whether its for an authentic airpods pro or a clone...you can see an authentic on on ifixit) it would be great to have this additional detail...perhaps mine is a little different in that the speaker wires are not soldered on to the speaker directly but onto a little moon shaped board...You can also see black fabric that is adhesive to the speaker and may have been under or over the moon shaped board. Can I uplaod a picture here or can I sent you one via email in case you may be interested in helping provided additional expertise. Be well. and Thanks.
oh..i relooked at your video and think I can see where the green antenna wire goes on the little board. I also see you do have the half moon board (with white and blue wires) on the speaker too, i just don't know if you can or if or how you can reattach it to the speaker. If not I can't fix it..but if so, you are a miracle worker and I'll put it back together with gratitude!
I see mine is a little different in that it has round magnet...but still not clear how the speaker wires are attached (via a board?) to the speaker...what i need to know:)
Hello, i think we have the same problem. Mine is the green wire thats disconnected. Did you manage to fix yours?
Can some one put a close up picture of the circuit. I wanna see where exactly the green wire is fixed in the circuit 🥲
no fr
My green wire is still with the speaker and i dont know how i can reconnect it because its so small in there
use a small soldring
how do i connect the green white and blue wires? i know where to connect it but i dont know HOW
do you have some micro tools? using small solider you can.
Hi i am trying to solder my blue and white wires, can you advice where i should solder them? Thanks a lot!
Please use low temp solider with 60:40 lead
Can you tell me the exact location where i should solder the wire on the pcb?
@@DIZ1988Mohan i have the exact same question😢
@@riskyamanullah7251 did you mean the rectangle board that is in the other airpod stem (my speaker wires are still attached there) or the half moon board that is on the speaker? my half moon board came off the speaker but wires are still attached and I'm trying to figure out if its just adhesived to the speaker or some other connection. Glad to email a picture if you have figured this out:) Peace.
Do i need solder wire
Yeah you need to have.
Sir, can i use superglue to connected the blue wire??I don’t have that thing to connect the wire😢please help
Super glue will not work
Could you please help me, I need to know where the green wire is attached on the ic so that I can fix it up by soldering
I dont have the copper on my airpod
I need help my white blue and green wires are disconnected with the green on the top side idk how to fix it without taking it apart
disconnect from battery | black and red then you can easily figure out
@@DIZ1988Mohan ok thank you
How much would it cost me to repair it?
Depends mostly less than 500INR
@@DIZ1988Mohan what kind/type of wire should i buy?
@@lily-ot5lt ask for small copper project wire
Jo magnet se issue aaya wo mera airpod girne se aa reha h apple airpod wo case me sahi se fir nehi ho reha jisse na charge ho pa reha plz ispe video banye
Thank you
My airpods fell on the ground and the left speaker disconnected with the wires
Same bro
Same bro and now idk what to do D: ):
Same here
This happened to me yesterday , my right one broke and I can’t do anything , I literally use both of them everyday. Idk what to do :(
Yeah, Same, my right Airpod disconnected from Both this red n black wires and now idk really know what else to do to on how to fix it cause I was always used both sides of my Airpods and now I don't even know how anymore now :(
Kya airpods k bottom connector mil jayega
yes
Can I use a hot glue gun?
Do green wire need to be connected?
i dont think so 0 tis an antena
Does the wire be available in stores?
Yes
Also, can you repair mine😞
@@noopurakkalkotkar3500 your location? if from Chennai i can help.
@@DIZ1988Mohan it would really be great if you help me with it.
@@noopurakkalkotkar3500 You may try with local mobile repair shop they might have all the tools.
I tried to glue the wire back like an idiot
omg
May I give this to fix to my near electronic shop
Getting a reply will be beneficial and will be appreciated
yeah
Hello Mohan Sir,
I am too much happy that I found your video to connect all wires
While removing buds my wire gots broken now I want to connect wires can I get your gelp
Thank you, yes
Super mohn
Thank you Sir
How do we know which wire goes where?
Blue and White go to speakers, Green to Antana, Red and Black to battery + - (once we check the PCB its mentioned + - S+- and a)
Where is green wire to go my friend
green is + left
Can you help me repair airpods pro
Sure, how can i help you?
❤
I think those are fake
@salingstuff80 What makes you think that?
I agree, but I have some like it for free...there are videos of authentic (ifixit) and clones like this one (youtube) just search and see...I'd still like to fix the clone, it was working really well..even spacial sound and noise cancellation worked well...but I couldn't change the ear plug and that's how I broke a few wires and the board came off the speaker which I'm trying to figure out how its attached...any info appreciated:) love projects like this but need some more info:) see above if you like.
lmao wtf these are fake 😂
Bhaag bey
Broo plz how can i contact you helpnme
to what u have to connect green cable?