@@OutOfTheBasementI personally like to see the continued downfall, or to see it improve. (Not likely in black series’s case unless people start actually voting with their wallets.) but overall I really do hope star wars figures get better and more affordable someday.
Ya we need ROTS PALPATINES there are at least 3 figures they could do from the prequels without shame or re use that we would all love, I really want the arrest scene with pre and post lightning, they add a new black cloak to have that first time he puts the robe over his red dress robe boom deluxe set
Buying any of them at full price is insane. Buying them on launch isn’t worth it. I just wait until Walmart has online sales. The 33 dollar figures drop as low as 9 dollars constantly.
I posted my pictures on the discord (my post was one also complaining how my preorder placed in May 2024 was never fulfilled and I just ordered this from Amazon instead) I haven't seen 1 person say they got a good robe from this release, which means it's not just some of us. I'm really glad I got the Archive release in store... I just swapped heads and put that one in the Throne and put this floaty robe one back in his box
It's a fairly easy fix if you'd be up for it! Run the hood under a tap until it gets completely soaked, then you can "sculpt" it into shape. It will retain it's shape pretty well after it dries
Mine in particular is even worse because the cloak is just straight up broken. The hole the clasp piece goes into is way too big to actually keep it in place. Even while doing the water trick that hood doesn’t sit down. Super disappointing.
The Marvel Legends team started photoshopping out pins and the legends community who are notorious for for accepting almost any slop that legends produces called them out on their bullshit and they stopped so to see the BS team start doing it out of nowhere like they can get away with it has to stop its scummy and its blatant false advertising.
It's possible to get that signature look from the hood without the stitches. If he's sitting in his throne, using the overhang, I was able to get it to stay down, and it's stiff enough to mold the sides so that I was able to get it to look how it was supposed to. If you want him standing, I read in another comment thread that getting the hood wet will allow you to mold it the way you want, and when it dries, it'll stay that way. I haven't tried it only because I've got him perfect in his throne, and I don't wanna screw it up!
That is shocking. One tip though, I can absolutely get the hood looking just right in the chair, just push the sides into his neck a bit, and the pressure of the back and top of the throne somehow holds it like that. It looks deceptively natural and accurate. All that being said I'm off to Amazon service to get some money back for miss selling it. EDIT: Nice one chaps, Just snagged a £17 partial credit refund to buy the Archive version from amazon!! They initially offered only 20% but I said can they match the Archive price if they do amazon credit, and they did. I would suggest everyone complain so Hasbro get the goddamn message not to fkk around with customer expectation and false advertising
So you’re saying my original throne room emperor value is going to go back up and I can sell it to pay off my daughter’s college tuition? 🤪 jk..jk.. This is so f&cked up…. I’m glad I have the archive already to make the fix. Good video guys very informative as always 👍🏻
While imo we are past the dark age of Black Series (Super Battle Droid, prequel Yoda and Brutus were wins) it does feel like we’re in the age of Hasbro cutting every single possible corner upon release.
@@OutOfTheBasement Exactly! I’m holding out this ride doesn’t come off the rails at least! Fingers crossed 🤞 we get some real bangers for ROTS’s anniversary! Any speculation vids coming up?
Does Hasbro know that a lot of collectors hate their robes and cloaks and buy third-party and so they just gave up? This is a huge blunder and I would say that Hasbro needs to reissue buyers of this set with a replacement robe. Huge QC and false advertising issue!
So many people are such hasbro fan boys they just keep buying hasbro products, giving hasbro no reason to not try to cheat customers, Hasbro knows people kit bash and they are building figures with that in mind, Hasbro knows they can not do a great product and collectors will “fix it”
I lucked out. Mine was on preorder, they announced back in stock, got an email from Amazon, shipped next day and I got one of the older ones I guess, as my robe is fine, had the stitching.
Thanks for the review! After thinking about whether or not to buy this, I bought the archive version, which was on sale at a bargain price, and it turned out to be the right choice.
Brilliant. This is to help sell the ones at Ollie's (to acquire a decent robe) and ease up the litigation...😶. Next: Tarkin Deluxe figure with Death Star Bridge and wailing Leia, but no head on Tarkin.
It's not just the missing stiches that makes it look bad. Also the fabric, isn't as soft as before and it's too shinny. As for the head sculpts upgrade, I don't think they necessarily look better. They have too much red on them this time. The old bluish gray dry-brushing was probably done to simulate the light reflection from the electricity. Under studio lights it's clearly visible, but not so much in natural light, so I'm fine with my original figure. Also, I've noticed the new thrones come much more scratched out of the box than before. I had it pre-ordered just for the updated box, but I'm glad I canceled it.
Hasbro took a page out of Palpatine's playbook on this one fellas. "Masters of Evil" is a reference to Hasbros' move to deceive the masses on this rerelease! Appreciate the true perspective on this, per usual. Stay worm, brothers
Thanks for the information guys!! Super helpful! One question…. Can you switch the robes? I bought one and I already have the archive palps so I am relieved! Thank you gentleman!!
You can switch the robes but I think it would be easier just to do the head and hands! The robe has that clasp on the front that is a pain to get on and off IMO. -Nate
Gotcha that makes sense! I haven’t messed with it so I didn’t know. I appreciate the info. I just got a bamboo printer so my plan is to print the throne room window for it as soon as I can!
That's the purpose of the windowless box right there. I mean I know it all adds up but really for the price point how much could two tiny stitches cost.
I personally like the newer robe as it matches other black series robes. I bought the archive previously so I have both one for stand up and in the thrown. However this still should have been advertised properly because I know alot of people like the thicker robes
I literally cancelled my order the day before it was due to despatch, so thanks for the info. Managed to bag the original from someone selling on Facebook 😊
I needed this because the first release sold out before I tried to order. In the meantime, I have the RotJ40th Emperor, so he now has the angry head and lightning hands. The cheapass robed Emperor looks OK in the throne with the hood pulled down properly
Mine just came in the mail the other day and I haven't even opened it yet. Good thing I got two archive Emperors from Ollie's already. Good call, damn it but good call.
The only thing that would’ve made this video better is opening with “Previously on OOTB” and a compilation flashback with a clip (there are a lot!😂) of Nate saying not to backtrack and be patient because eventually everything gets re-released and you too can get your hands on the emperor on the throne and then flash forward to today
GUYS, the robe is an upgrade! --- It’s the same look he has while falling down the tube after Vader throws him in! 😆 Still happy I got it for the chair and accessories-totally worth it!
I have the Archive and a 3D printed throne, from back when the original set was up to $300 on the aftermarket. I later found a deal on one for $60 sealed and got it to keep in box on display. For hands, I’ll use Sidious, and make them fit with tack. I guess people can get an archive for $6 at Ollie’s for the robe.
Wow thanks to this vid and the livestream last week, I already had an archive one, but now I’m just 3D printing my own throne. How did they look at this and think it was ready to ship 😂
Man i was excited for this one. I mostly just want that throne. Now I'm thinking of canceling the pre-order. Do u guys think it'll be hard to get later or do u predict a price drop?
I was going to get this for the updated face paint and deco on the throne but now I’m not so sure, I do have a few spare emperor robes from discount archive and 40th figures so I can easily swap it but I shouldn’t have to
But like honestly, how much time and money did they save by NOT doing the stitching? Just a really slack way to cut corners on what should have been a 100% stellar release.
My original release throne also had a QC issue where it has a small scratch on it right out the box, but I’m still glad I didn’t commit the money for this supposed “upgrade”. At least you can re-use this cloak more effectively for a Darth Jar-Jar figure 🤣
I have the figurine in hand, the dress is a downgrade when compared to the photo, but I find that the hood is not a problem, I managed to get the right shape and it holds well, with a better rendering than the previous version
I hate this. I can't pre-order reissues anymore. They messed up Qui-Gon, photoshopping the pins out from Obi-Wan, now the Emperor... Lesson learned: we always have to keep the original figures until we get the reissues and make one good figure with combinating them. :/
Its so poetic that just when I was about to watch this video, just when I sat to play it, a mail call notify me, saying that my copy just arrived Pretty poetic, I knew from you guys, from the last lazy sunday that this version was going to be a little bit crappy, but I still needed the throne, I just went on Amazon and bought the archive version for 10$ and it's alright for me, I was going to buy it anyway for another shelf :')
Just glad I have my SHF Emperor & Royal Guards set. Spendy? Totally. But you get TWO world class Emperors and a Throne in addition to the two Royal Traffic Cones!
Exactly why I subscribe to you guys, glad I pre-ordered Unduli and Shaak Ti instead. When it comes to reissues, Hasbro keeps missing on what should be easy layups. Just another excuse to focus on the Clone Wars I suppose
I had this set pre-ordered for the throne, extra heads etc. for months but decided to cancel before it fulfilled. Glad I did. I can get a 3D printed throne somewhere for cheaper and just rock with the emperor I already have. The heads are cool, but I can only pose him with one on my shelf.
Got mine ,opened it and put it back in the box instant return, I need the throne, but I’ll wait for it to go on clearance at this point shame if the robe was the same as the archive $10 figure I would have been more than happy to keep the $50 purchase And throw my archive in a bin.
Yeah, the quality control on that is wild. I like everything else about it. The robe just makes it feel cheap with the way that it is. Will definitely be changing mine out. Other than that, I really like the figure.
I almost ordered one of these, glad I passed. We should not support this behavior from Hasbro. They can try to explain away something like this robe as a "factory miscommunication", but when you pair it with the absolutely intentional photoshopping of pinned joints, and the misrepresentation of the product, it's not a good look. Ultimately it's $45 for the chair and some accessories when you have to go get the old figure. Hasbro been taking notes from Super7? Lucasfilm definitely has some responsibility here too. When you compare the trends in Black Series Star Wars quality to the amazing value-for-price GI Joe Classified line, the impact of the licensing cost and interference from Lucasfilm starts to become glaringly obvious.
Re-releases should never be worse than the original release. A prime example of what I've been saying. Budget cuts to the line is making it worse. I also hard disagree with your recommendation that people should still buy it. No. Send Hasbro the message that they fucked up. Everyone should absolutely refuse to pay full price for this set.
Not kidding. I think I will be running by Ollie’s to get a better quality Emperor to go with this throne. Now it’s just a race between me and Hasbro to see who’s going to be done with the other first.
It’s insane they thought this was acceptable. I’m glad I got the archive for cheap but this was a figure I was looking forward to since I missed the first.
Well I just got this in, but I haven’t had the chance to open it yet. I’m glad I saw this first so I’m not so disappointed. Fortunately since I have the archive from Ollie’s, I really just bought this set for the accessories. This also marks the second throne that I’ve bought from Hasbro that came with a sub-par rerelease of an older figure. So I fully comprehend your anger concerning this.
Thank you for honest review... Yeah, this is so weird...Looks like Hasbro wants to slightly mess up, in order to launch a re-release, well...thank you for your work ! Marc
Wow Hasbro, total scumbag move. I was going to buy this too but i honestly don’t think i want it now when i can just 3D print a throne and i already own the archive figure. I suppose theres still the three head sculpts but damn, that looks awful AF.
JIC Hasbro is reading the comments……fix this and don’t let it happen again please! This was egregious . I’m very thankful this is something I didn’t need to add as I would of surely pre ordered it
I bought this cuz I sold off the force lightning hands and one of the head sculpts from original release and had regretted it ever since. So now I got 2 palpys and 2 thrones and extra heads
I gave this a one-star review on Amazon during this week's Sunday livestream. Such BS. I also reported the product on Amazon as having misleading photos.
Are you familiar with the tragedy of Darth Sidious the unstitched? I have the archive emperor. I don't have a throne. I don't need a throne. but if it goes on sale I'll get it (for the throne).
This needs to get blown up on Instagram. Unacceptable to continue to hike up prices and in return give lower quality.
Feel free to share the video around! We gotta let people know the truth about this set. -Nate
Stopped buying this crap years ago.
@@-Lycan- why are you watching this video? Lol.
@@OutOfTheBasementI personally like to see the continued downfall, or to see it improve. (Not likely in black series’s case unless people start actually voting with their wallets.) but overall I really do hope star wars figures get better and more affordable someday.
It’s the robot chicken emperor
What the hell is an aluminum falcon?!?
@ 😂
Go for Poppa Palpatine!
TOTALLY! This is EXACTLY what i thought!😂🤣
LOL
Between photoshopping old double legs to look pinless and now this, the Star Wars team at Hasbro is getting into some real scummy practices.
I meaaaaaaaaaaaan...it is ridiculous. -Justin
Marvel Legends occasionally dips into these practices as well.
Yet somehow people will say it isn't false advertising. SMH..
The soft goods being oversized makes it look like the robot chicken Palpatine
It’s actually depicting the emperor as he’s being thrown down the reactor shaft
💀💀💀
It simulates the wind around him, blowing the robe as his body is about to overload that part of the death star
😂
Screw hasbro....i went to ollies...bought emperor for 10...went to etsy..bought 3D printed thrown 10 bucks.
Smarter 😎
Ya we need ROTS PALPATINES there are at least 3 figures they could do from the prequels without shame or re use that we would all love, I really want the arrest scene with pre and post lightning, they add a new black cloak to have that first time he puts the robe over his red dress robe boom deluxe set
Exactly what I did also
Yep. Did the exact same thing.
Buying any of them at full price is insane. Buying them on launch isn’t worth it. I just wait until Walmart has online sales. The 33 dollar figures drop as low as 9 dollars constantly.
“Their attempt on my release with their lack of stitching has left me scarred and deformed.” - Emperor Palpatine
That “tuck” at the end. :-)
It's shocking the lengths that Hasbro is willing to go to cut corners. Good looking out for noticing this and telling everyone.
New scene specific Black Series figure of Don Corleone with the funeral director: "Look how they massacred my boy!"
How ironic is it that the emperor is the one figure that is deceiving everyone 🤣
Somehow Palpatine returned… again.
I posted my pictures on the discord
(my post was one also complaining how my preorder placed in May 2024 was never fulfilled and I just ordered this from Amazon instead)
I haven't seen 1 person say they got a good robe from this release, which means it's not just some of us.
I'm really glad I got the Archive release in store... I just swapped heads and put that one in the Throne and put this floaty robe one back in his box
Archive Palpatine + 3D printed throne = Problem solved!
Then you still don't have the extra heads and hands
Do u know who has those stl files? I'm down to print it. Not gonna be as good but def cheaper
I was about to pick this one up, so glad you guys posted this video before I was able to 😯
It's a fairly easy fix if you'd be up for it! Run the hood under a tap until it gets completely soaked, then you can "sculpt" it into shape. It will retain it's shape pretty well after it dries
Yeah I know it can be fixed with water but we shouldn’t have to fix the figures. -Nate
Mine in particular is even worse because the cloak is just straight up broken. The hole the clasp piece goes into is way too big to actually keep it in place.
Even while doing the water trick that hood doesn’t sit down.
Super disappointing.
Mine is pretty bad too. When I was taking the B roll shots it kept popping out of place. Super annoying! -Nate
Maybe the blue/grey wash was supposed to simulate the reflection/shadow of the force lighting on his face? Just a shot in the dark?
I've always thought the same but its a weird choice because not everyone is going to display him with the lightning hands
The Marvel Legends team started photoshopping out pins and the legends community who are notorious for for accepting almost any slop that legends produces called them out on their bullshit and they stopped so to see the BS team start doing it out of nowhere like they can get away with it has to stop its scummy and its blatant false advertising.
It's possible to get that signature look from the hood without the stitches. If he's sitting in his throne, using the overhang, I was able to get it to stay down, and it's stiff enough to mold the sides so that I was able to get it to look how it was supposed to. If you want him standing, I read in another comment thread that getting the hood wet will allow you to mold it the way you want, and when it dries, it'll stay that way. I haven't tried it only because I've got him perfect in his throne, and I don't wanna screw it up!
That is shocking. One tip though, I can absolutely get the hood looking just right in the chair, just push the sides into his neck a bit, and the pressure of the back and top of the throne somehow holds it like that. It looks deceptively natural and accurate. All that being said I'm off to Amazon service to get some money back for miss selling it. EDIT: Nice one chaps, Just snagged a £17 partial credit refund to buy the Archive version from amazon!! They initially offered only 20% but I said can they match the Archive price if they do amazon credit, and they did. I would suggest everyone complain so Hasbro get the goddamn message not to fkk around with customer expectation and false advertising
11:29. Perhaps Hasbro did this deliberately to sell all the Ollies overstock.
I don’t think Hasbro gives a shit about Ollie’s lol -Nate
This may have ruined my day. Mine is sitting at my freight forwarder. I'm contacting Amazon for a credit.
So you’re saying my original throne room emperor value is going to go back up and I can sell it to pay off my daughter’s college tuition? 🤪 jk..jk.. This is so f&cked up…. I’m glad I have the archive already to make the fix. Good video guys very informative as always 👍🏻
Buy all old red and black box palpatines now! BUY! BUY! BUY! We are investing now Brian 😂😂😂 -Nate
I *am* The Senate!
No...that's not true....that's impossible! NOOOOOO! NOOO!! 😫
The real masters of evil are the budgeting team that made this monstrosity
So should i just by the archive figure? And then like throw this figure away? Will the alternate heads work on the archive figure?
The alt heads will work. It's the same figure. -Justin
@OutOfTheBasement thank you
While imo we are past the dark age of Black Series (Super Battle Droid, prequel Yoda and Brutus were wins) it does feel like we’re in the age of Hasbro cutting every single possible corner upon release.
Yeah this just continues the wild roller coaster ride of the black series unfortunately. -Nate
@@OutOfTheBasement Exactly! I’m holding out this ride doesn’t come off the rails at least! Fingers crossed 🤞 we get some real bangers for ROTS’s anniversary! Any speculation vids coming up?
About time to sign up for one of those anger management classes! 🤬🤣
Does Hasbro know that a lot of collectors hate their robes and cloaks and buy third-party and so they just gave up? This is a huge blunder and I would say that Hasbro needs to reissue buyers of this set with a replacement robe. Huge QC and false advertising issue!
I really don’t know what could have happened here other than deceptive cost cutting! It’s BS! -Nate
So many people are such hasbro fan boys they just keep buying hasbro products, giving hasbro no reason to not try to cheat customers, Hasbro knows people kit bash and they are building figures with that in mind, Hasbro knows they can not do a great product and collectors will “fix it”
I lucked out. Mine was on preorder, they announced back in stock, got an email from Amazon, shipped next day and I got one of the older ones I guess, as my robe is fine, had the stitching.
I just got this yesterday, I'm lucky that I already have the archive version. Thanks mate, great review.
Thanks for the review!
After thinking about whether or not to buy this, I bought the archive version, which was on sale at a bargain price, and it turned out to be the right choice.
Brilliant. This is to help sell the ones at Ollie's (to acquire a decent robe) and ease up the litigation...😶.
Next: Tarkin Deluxe figure with Death Star Bridge and wailing Leia, but no head on Tarkin.
It's not just the missing stiches that makes it look bad. Also the fabric, isn't as soft as before and it's too shinny. As for the head sculpts upgrade, I don't think they necessarily look better. They have too much red on them this time. The old bluish gray dry-brushing was probably done to simulate the light reflection from the electricity. Under studio lights it's clearly visible, but not so much in natural light, so I'm fine with my original figure. Also, I've noticed the new thrones come much more scratched out of the box than before. I had it pre-ordered just for the updated box, but I'm glad I canceled it.
WOW! What the Hell Hasbro?! Glad I got the 1st release. Huge bummer
Hasbro took a page out of Palpatine's playbook on this one fellas. "Masters of Evil" is a reference to Hasbros' move to deceive the masses on this rerelease!
Appreciate the true perspective on this, per usual.
Stay worm, brothers
Thanks for the information guys!! Super helpful! One question…. Can you switch the robes? I bought one and I already have the archive palps so I am relieved! Thank you gentleman!!
You can switch the robes but I think it would be easier just to do the head and hands! The robe has that clasp on the front that is a pain to get on and off IMO. -Nate
Gotcha that makes sense! I haven’t messed with it so I didn’t know. I appreciate the info. I just got a bamboo printer so my plan is to print the throne room window for it as soon as I can!
Does the throne rotate?
That's the purpose of the windowless box right there.
I mean I know it all adds up but really for the price point how much could two tiny stitches cost.
I personally like the newer robe as it matches other black series robes. I bought the archive previously so I have both one for stand up and in the thrown. However this still should have been advertised properly because I know alot of people like the thicker robes
We're bringing out the rage bait with this one! 🗣
Buying the same thing twice is awesome
I literally cancelled my order the day before it was due to despatch, so thanks for the info. Managed to bag the original from someone selling on Facebook 😊
Nice! How’s the og price wise? Did you get a deal? -Nate
@OutOfTheBasement £40 sterling so less than retail. Unopened too!!
Wait so all of them are like this or just the second run?
This is the brand new “masters of evil” reissue NOT the original red and black box release.
Only solution glue IT to.shape otherwise ITS looking crappy
I needed this because the first release sold out before I tried to order.
In the meantime, I have the RotJ40th Emperor, so he now has the angry head and lightning hands.
The cheapass robed Emperor looks OK in the throne with the hood pulled down properly
Looks like they removed the edge stitching from the opening of the robe as well.
All of the stitching has been removed
Mine just came in the mail the other day and I haven't even opened it yet. Good thing I got two archive Emperors from Ollie's already.
Good call, damn it but good call.
Your reactions were hilarious, I can't believe this wasn't talked about earlier. Thanks for saving us 😭
The only thing that would’ve made this video better is opening with “Previously on OOTB” and a compilation flashback with a clip (there are a lot!😂) of Nate saying not to backtrack and be patient because eventually everything gets re-released and you too can get your hands on the emperor on the throne and then flash forward to today
I mean that truth does remain solid!...lol. -Justin
I'm glad it got a used one off ebay and didn't wait for the Amazon re-release. Hasbro just cheaped out... shameful.
GUYS, the robe is an upgrade! --- It’s the same look he has while falling down the tube after Vader throws him in! 😆
Still happy I got it for the chair and accessories-totally worth it!
I cancelled mine last month and now I'm curious, are they all like this or is this just a one off?
I have the Archive and a 3D printed throne, from back when the original set was up to $300 on the aftermarket.
I later found a deal on one for $60 sealed and got it to keep in box on display. For hands, I’ll use Sidious, and make them fit with tack.
I guess people can get an archive for $6 at Ollie’s for the robe.
Wow thanks to this vid and the livestream last week, I already had an archive one, but now I’m just 3D printing my own throne. How did they look at this and think it was ready to ship 😂
clone helmet from where?
It’s the Hasbro helmet customized to our made up “rebo battalion” clone trooper. One of our friends made it for us! -Nate
Black Series x Robot Chicken - Hasbro does it again folks
Man i was excited for this one. I mostly just want that throne. Now I'm thinking of canceling the pre-order. Do u guys think it'll be hard to get later or do u predict a price drop?
The original set went on sale, but these are different times. It's hard to say. -Justin
@OutOfTheBasement thanks brotha 🙏
I was going to get this for the updated face paint and deco on the throne but now I’m not so sure, I do have a few spare emperor robes from discount archive and 40th figures so I can easily swap it but I shouldn’t have to
But like honestly, how much time and money did they save by NOT doing the stitching? Just a really slack way to cut corners on what should have been a 100% stellar release.
My original release throne also had a QC issue where it has a small scratch on it right out the box, but I’m still glad I didn’t commit the money for this supposed “upgrade”. At least you can re-use this cloak more effectively for a Darth Jar-Jar figure 🤣
Lmaooo I'd love to see some Darth Jar Jar pics. -Justin
I have the figurine in hand, the dress is a downgrade when compared to the photo, but I find that the hood is not a problem, I managed to get the right shape and it holds well, with a better rendering than the previous version
I hate this. I can't pre-order reissues anymore. They messed up Qui-Gon, photoshopping the pins out from Obi-Wan, now the Emperor... Lesson learned: we always have to keep the original figures until we get the reissues and make one good figure with combinating them. :/
Yeah no kidding, I’m glad I kept my Qui-Gon and old emperor. We shouldn’t have to “fix” these figures ourselves! -Nate
The old tale from Hans Christian Andersen really fits well here... The Emperor's New Clothes
Lol!
….and they wanna know why sales have dropped. They are going to lose all of their fans. It’s crazy. 🤦🏿
glad I had 3 superior emperor robes laying around in my stash. that was an easy fix... but I would freak out completely if I didn't.
Good stuff! -Justin
Its so poetic that just when I was about to watch this video, just when I sat to play it, a mail call notify me, saying that my copy just arrived
Pretty poetic, I knew from you guys, from the last lazy sunday that this version was going to be a little bit crappy, but I still needed the throne, I just went on Amazon and bought the archive version for 10$ and it's alright for me, I was going to buy it anyway for another shelf :')
Dammit. Ignorance WAS bliss. Cannot unsee, but I’m glad I now know. Archive fig purchased. Thank you for your service guys!❤️
Glad you were able to snag the Archive figure! -Justin
Just glad I have my SHF Emperor & Royal Guards set. Spendy? Totally. But you get TWO world class Emperors and a Throne in addition to the two Royal Traffic Cones!
Exactly why I subscribe to you guys, glad I pre-ordered Unduli and Shaak Ti instead. When it comes to reissues, Hasbro keeps missing on what should be easy layups.
Just another excuse to focus on the Clone Wars I suppose
I had this set pre-ordered for the throne, extra heads etc. for months but decided to cancel before it fulfilled. Glad I did. I can get a 3D printed throne somewhere for cheaper and just rock with the emperor I already have. The heads are cool, but I can only pose him with one on my shelf.
Sounds like that worked out for you! -Justin
This went from I pre-ordered on day one to now canceling and waiting to see if it goes on discount
Got mine ,opened it and put it back in the box instant return, I need the throne, but I’ll wait for it to go on clearance at this point shame if the robe was the same as the archive $10 figure I would have been more than happy to keep the $50 purchase And throw my archive in a bin.
Yeah, the quality control on that is wild. I like everything else about it. The robe just makes it feel cheap with the way that it is. Will definitely be changing mine out. Other than that, I really like the figure.
I almost ordered one of these, glad I passed. We should not support this behavior from Hasbro. They can try to explain away something like this robe as a "factory miscommunication", but when you pair it with the absolutely intentional photoshopping of pinned joints, and the misrepresentation of the product, it's not a good look. Ultimately it's $45 for the chair and some accessories when you have to go get the old figure. Hasbro been taking notes from Super7?
Lucasfilm definitely has some responsibility here too. When you compare the trends in Black Series Star Wars quality to the amazing value-for-price GI Joe Classified line, the impact of the licensing cost and interference from Lucasfilm starts to become glaringly obvious.
The Star Wars IP is over valued now days. It's still a big brand but it's not what it used to be after Disney got their hands on it.
Re-releases should never be worse than the original release. A prime example of what I've been saying. Budget cuts to the line is making it worse. I also hard disagree with your recommendation that people should still buy it. No. Send Hasbro the message that they fucked up. Everyone should absolutely refuse to pay full price for this set.
hes got a gray face in ROTJ idk why they keep saying they like this new version. both face versions suck
Lol.
Not kidding. I think I will be running by Ollie’s to get a better quality Emperor to go with this throne. Now it’s just a race between me and Hasbro to see who’s going to be done with the other first.
I just got mine a couple days ago and I haven't opened it yet. Thanks for the warning guys, I guess this will be another one that stays sealed
I got the he Archive one, I made a new cane, larger from a coffee sticks.
It’s insane they thought this was acceptable. I’m glad I got the archive for cheap but this was a figure I was looking forward to since I missed the first.
Can you put the different heads on the 40th anniversary (Kenner card) Emperor Palpatine?
Well I just got this in, but I haven’t had the chance to open it yet. I’m glad I saw this first so I’m not so disappointed. Fortunately since I have the archive from Ollie’s, I really just bought this set for the accessories. This also marks the second throne that I’ve bought from Hasbro that came with a sub-par rerelease of an older figure. So I fully comprehend your anger concerning this.
Thank you for honest review...
Yeah, this is so weird...Looks like Hasbro wants to slightly mess up, in order to launch a re-release, well...thank you for your work !
Marc
Appreciate your support! -Justin
Wow Hasbro, total scumbag move. I was going to buy this too but i honestly don’t think i want it now when i can just 3D print a throne and i already own the archive figure. I suppose theres still the three head sculpts but damn, that looks awful AF.
This is an ALL TIME fumble
Hasbro: where profits come first, second and third.
Two steps forward three steps back. Very disappointing. Good on you guys letting people know.
JIC Hasbro is reading the comments……fix this and don’t let it happen again please! This was egregious . I’m very thankful this is something I didn’t need to add as I would of surely pre ordered it
I just find this especially odd since the Archive Palpatine has the stitching...
It really makes no sense!
This would have easily been a top figure! What were they thinking?!
Wow, they really cheaped out (glad I cancelled mine). Not only is the new one robe without stitching, I also see that the fabric is thinner.
Can the hood be stitched by someone who knows how to do stitches? That would solve the problem.
It’s possible but of course that requires knowing someone with the talent to do so.
What to do in this situation? Will you send it back? Any chance that Hasbro will make good on their swindle? What say you, Nate and Justin?
I am keeping mine because I like the heads and I need the new throne. -Nate
I bought this cuz I sold off the force lightning hands and one of the head sculpts from original release and had regretted it ever since. So now I got 2 palpys and 2 thrones and extra heads
I gave this a one-star review on Amazon during this week's Sunday livestream. Such BS. I also reported the product on Amazon as having misleading photos.
That Kalibar reference taking me way back!
Haha!
the blue on the original emperor is reflection of the force lightning effect on his face
That’s some good mental gymnastics there lol! I like it David. -Nate
I already had the archive Emperor with the better hood, so I just stuck him on the throne.
Damn. Guess I’ll be swapping robes with my archive one.
I’m so glad I saw this. I went and canceled it on Amazon. I’d have been so pissed.
Excuse my language but that’s f*ckin disgusting.
Are you familiar with the tragedy of Darth Sidious the unstitched? I have the archive emperor. I don't have a throne. I don't need a throne. but if it goes on sale I'll get it (for the throne).
You definitely need a throne! I think after this we can definitely expect a sale. -Nate