HYUNDAI GENESIS COUPE WHEEL BEARING REPLACEMENT
HTML-код
- Опубликовано: 3 окт 2021
- my steering wheel was shaking at higher speeds and seemed to me like the wheel bearing was to blame so decided to replace them along with the end links.
WHEEL BEARINGS: amzn.to/3KVXSoK
END LINKS: amzn.to/33XFgUN
Thanks for watching
DON'T FORGET TO LIKE, COMMENT AND SUBSCRIBE!!
KEEP PUSHING
FOLLOW ME ON IG: IG: loni101?igshid=... Авто/Мото
Going to be doing mine this weekend. Is it the same process for the rear hubs? I'm doing all 4 regardless but any guidance goes a long way. You said 15mm or 17mm for the 4 bolts on the back of the hub?
It's not the exact same because you will have to remove the axle nut other than that it's basically the same.
@@LoniVlogZ Any source to remove the axle nuts? I'm looking and barely see anything.
@@_ZeRAuJ it's a 36mm nut at the end of the axel if I am not mistaken and you just take it odd then there should be 4 bolts in the back just like the front might be tight back the plus the handbrake shoes won't make it easy but it can be done without taking it apart.
@@LoniVlogZ It was a struggle but I did it. I'll try to create a video about it but I did end up getting abs lights. 😅Guess the speed sensor went out
@@_ZeRAuJ good stuff 👏🏾 👏🏾👏🏾... and that most likely is because of the speed sensor. They are fragile especially when they have been on there for sometime.
Thank god bro, I needed this video ! Came in clutch
Glad I could help 🙏🏽
Just had to replace my wheel hub. Connection went bad and corroded my wire and connection behind the wheel hub. Helped out lots! Thanks ! Btw i live in Ontario too so it was cool seeing a familiar plate👌
Happy the video helped and hope to see you around some time 👌🏾
love the work, keep up the work
Thanks will do
Nice, but i would suggest jacking up on front cross member using a length of 4x4 to spread the load. Pinch welds are for scissor jacks and easily damaged.
Elloni the Mechanic lool🔥🔥🔥🔥🔥
Lol something like that
Great job brother
Thanks broski 🙏🏽
Showing love, jokes, just mamaguyin he for free oil changes in the future lmao
Lol 🤣 😆 🙏🏽
Just ordered the same wheelhub part you used (WH513278T), how has it held up so far (one year later) still good?
It is still good so far no problems at all
@@LoniVlogZ Thank you for the update, good to hear :) Will be getting them on tuesday next week, bit of a delay to get them shipped from the states to my country.
@@123krill oh nice which country do you live in?
Front is easy....rear takes some time......236k 15 Coupe.....love my 3.8....but plastic peeling now on paint
The rear takes more time because you have to deal with the parking brake
Did you Loctite them?
Yes I did
Bro the bearing need grease or not?
You don't need to grease these if you look at it there is nowhere to add any
Did it fix the shakiness?
It did for me.....make sure to check your control arms as well and also make sure your wheels are balanced.
@@LoniVlogZ what was the main reason you replaced the front hubs bro? I’m just having trouble with my 16 3.8 rspec, I hear a loud clicking noise everytime I’m on 1st gear and I’m around 1500rpms, any thoughts on that ?
@@anthonylopez9727 no idea what it could be without hearing it and where it's actually coming from it could be anything even a transmission problem
@@anthonylopez9727 and the main reason I changed it was because of the shaking and as you can see in the video they were bad
@@LoniVlogZ sounds good appreciate the reply/help brotha, stay safe 🙏
How big do the MM bolt removers have to be to remove the nuts from the front driver's side?
Which part if it's the bolts holdout the wheel bearing it's 17MM
@@LoniVlogZ the 4 bolts holding the wheel bearing is 17MM?
@@ketchapchuuu7756 if I remember correctly it's been over a year since I did them