you’re the GOAT thank u! followed someone else’s tutorial who was going too fast and making it hella complicated this was soo easy to follow!!! I appreciate u!
First of these are the quickest, cutest little cuffs to make!!! So easy to customize as well. Was able to finish one within an hour despite a few set backs. Towards the second half of crosses I swear I wasn’t able to follow along but I just needed to trust u. 😂
this was very fun and easy to do it was a bit confusing when i didnt know where to pull the string to start a new part but i figured it out. these always look so cool when i see them and im glad i could finally make one!!
Yes. just tie a peice of string to the top row. Or you can string back through other beads to get to the same place if you don't want to cut your string.
We are making a V pattern by zig zagging through our connector beads. Add 3 beads, string through the middle point, add 3 beads string up to our connector bead.
@@GingerCandEhi! when i'm looking at your cuff compared to mine, at the end ur string is at a higher point than mine, ive spent 5 minutes trying to figure out, do i string through beads then add on 3 beads or just see how it goes
@punkauto I took my string and went through a few beads in the cuff until I reached the top and was coming out of one of the green accent beads. I just realized the clip is edited out. 🫣 sorry
I started making kandi around almost 2 months ago and I’m pretty good at making most base cuffs (peyote, multi stitch, 3d, x stitch) do any of you have a favorite cuff or thing to make out of kandi? If so tell me I want more ideas!
I've watched so many tutorials on how to make cuffs, but I have such a awful time trying to make the x bace. Is there a easier way to make the x bace? ( I'm sorry if this question is dumb)
![3D Cube Cuff - [Kandi Tutorial] | @GingerCandE](http://i.ytimg.com/vi/s--FHBSzFao/mqdefault.jpg)
![3D Cube Cuff - [Kandi Tutorial] | @GingerCandE](/img/tr.png)
![X-Base Cuff - [Kandi Tutorial] | @GingerCandE](http://i.ytimg.com/vi/UZUCfXi--6Q/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
![Supernova Cuff - [Kandi Tutorial] | @GingerCandE](/img/1.gif)
These are awesome. Saving them so I can sit down and make Kandies while camping at lost lands!
I'll be there. We're having a kandi meetup at 2pm on Saturday in the Village Marketplace.
I JUST CAME FROM UR X CUFF TUT FROM 11 YEARS AGO, IT WASS SOOOOOO GOOD AND EASY TO FOLLOW TYSM!!!
This was so much easier than it looked, thank you for making this!
you’re the GOAT thank u! followed someone else’s tutorial who was going too fast and making it hella complicated this was soo easy to follow!!! I appreciate u!
Just used up all my pink beads but it looks amazing
First of these are the quickest, cutest little cuffs to make!!! So easy to customize as well. Was able to finish one within an hour despite a few set backs. Towards the second half of crosses I swear I wasn’t able to follow along but I just needed to trust u. 😂
this was very fun and easy to do it was a bit confusing when i didnt know where to pull the string to start a new part but i figured it out. these always look so cool when i see them and im glad i could finally make one!!
I made the coolest cuff! Could not have done it without your awesome tutorial! Thank you!!
this is so cool X3! i used your colors and i love it! totally reminds me of a minecraft creeper ^_^
Omg it does look like a creeper! NOW I LOVE IT EVEN MORE! (Creepers are my fav mobs)
Thank you for posting !! Ive been wondering how to make these for so damn long 😭😭😭😭
i’m getting monster energy vibes and i’m loving it
I made a very colourful one of these for my friend! Thanks for the tutorial :’ )
Bless you for making this so simple 🥺
Loved making this... And love how it turned out. Thanx so much!!!! ❤️❤️❤️❤️❤️
omg im so doing this
After you formed the points along the middle, it looks like you went back to the top of the cuff. Did you?
Yes. just tie a peice of string to the top row. Or you can string back through other beads to get to the same place if you don't want to cut your string.
I made my first UFO cuff with this tutorial and it turned out amazing! Alll your videos are so easy to understand!
I just made this but without the special beads at the end I had a lot of fun
thank you! ive been wanting to make one forever since im still in quarantine ._.
I had to use different beads for the end but it still turned out great ❤
love it
im kinda confused about the bit at 1:30
We are making a V pattern by zig zagging through our connector beads. Add 3 beads, string through the middle point, add 3 beads string up to our connector bead.
@@GingerCandEhi! when i'm looking at your cuff compared to mine, at the end ur string is at a higher point than mine, ive spent 5 minutes trying to figure out, do i string through beads then add on 3 beads or just see how it goes
@punkauto I took my string and went through a few beads in the cuff until I reached the top and was coming out of one of the green accent beads. I just realized the clip is edited out. 🫣 sorry
does it have to be 30 beads? i love your videos sm theyre so helpful
No you can use whatever size you like for the x cuff. It shouldn't change the structure for this cuff.
This was so fun to make but I have one question how do I tye it at the end
How can I add a perler bead piece onto the cuff?
I like to loop the string around the last layer with the specialty beads. I usually use at least 2 places to tie it off.
How do I tie off the spikes..?
Your videos are very very helpful!
I'm so glad you like them 😊
This is so easy! Thank you!
Thank you so much! I love this! It was a little bit difficult to follow 😅 but I figured it out 👍🏼
I love ur videos❤
I watch you from México 🥰
OMG I love anything alien or horror so I am so making this :0
love this!
how do u tie the knot.into the needle?? I'm sorry I'm just confused on that part
I just double knot it.
I started making kandi around almost 2 months ago and I’m pretty good at making most base cuffs (peyote, multi stitch, 3d, x stitch) do any of you have a favorite cuff or thing to make out of kandi? If so tell me I want more ideas!
I like singles or small bracelets 🥰
my favorite thing to make is probably a rotator cuff (i have only been doing kandi for a couple weeks so this is my favorite thing to make so far)
Such a quick and to the point tutorial. Thanks so much, it was so easy to follow!
I miss your tutorials!! when will u be coming back to yt?
I am currently posting on TikTok. After July I will have more free time available.
@@GingerCandE oh cool!!!!!! I'll def follow u
This is 4 years old so you probably won’t respond but how many x high is this 0:53
2
Just finished mine using this tutorial!!
instead of pony beads, seed beads arrived if i follow te tutorial but with them will it work?
You would have to adjust for size since the beads are smaller.
Thanks! This was really helpful!
Thanks so much im so happy!
this is sick , how many beads does it take?
A lot. 😂 I'm not entirely sure.
Can you add perlers to this? I'm sorry if this is dumb, but this'll be my first 3D cuff!
You can add anything your heart desires.
OMG !! tysm this was so helpful :D
How do you tie it off?
Future me is it easy?
I hope so 😋
I love your videos and tutorials, could you be a but more clear with steps next tine? I had to guess some of them. Thanks for another great video!
Hi there, I’ve started making cuffs and I’m so in love!! I was just wondering, what needle do you use to thread the beads? Thank you so much!
1mm fabric covered elastic. Plastic needle.
@@GingerCandE thank you so much, I appreciate it!
I’m confused on the part at 2:08 can you explain how to string it more thoroughly in a comment?
How did you tie it off? Also love you vids
Put the string in between 2 beads. This makes a loop. Put the end of the string into the loop and pull tightly. Repeat a few times.
@@GingerCandE ok thx’s!
How did u go back up to the top did u js string it thro the x’s or?
Yes
@@GingerCandE ok Ty ^^
I've watched so many tutorials on how to make cuffs, but I have such a awful time trying to make the x bace. Is there a easier way to make the x bace? ( I'm sorry if this question is dumb)
I have a tutorial on how to make it. If you search X-base cuff and gingercande it should pop up
@@GingerCandE Thank you!
i know im suuuuper late but i always love turbo beads tutorials!! they go super in depth on everything and are very easy to follow
This is possible to do with just 1x tall cuff? Or does it HAVE to be 2x?
Nvm I'm doing it with 1x 😈😈
😂 Let me know how it goes!
How did it go?
I just made one and it’s so cute ! I’m totally going to make more !!! :D
Do you need the smaller beads or could i just use star beads?
No stars would work
do you have to use those bigger and smaller beads? or could you just use kandi beads
,
No you do not. Use any bead you like.
1:45
how many connecter beads long does the x base have to be?(like- how big is the bracelet)
is there a certain number so that the middles all line up?
2 x high!
where do i tie off the spikes at the first part?? i’m so confused and i’ve had an unfinished UFO cuff just sitting in my room for about a week now.
Anywhere you think it needs a knot. I tie mine usually at the end of a row.
@@GingerCandE thank you!! i figured it out today!! sorry if i sounded a bit salty 😅😅
Does this work on a thinner x-base cuff?
No
1:41 time stamp for myself lol
i modified mine in the strangest way possible
We love strange kandi here 👽
Bru why can’t they make the first part in the same videooo
I’m still confused but it helped a lot!
Checkpoint for me :) 1:53
im almost finished but i ran out of beads :(
Oh no that's the worst. You can always add a clothes pin to the end of the string until you get more.
I ran out of beads 🥰
I already cutt my my string cuz didn’t teach the first part
Just tie it back on 😊
Too fast and confusing
Fr! I just made what I could do and made my own kind!