Transform your Raptor from sick, to FULLY SICK!! TurboSmart BOV install Next Gen Ford Ranger Raptor
HTML-код
- Опубликовано: 13 сен 2024
- Hey legends!
Check out our Turbosmart Blow Off Valve BOV Kompact EM Dual Port VR19 install on our Next Gen Ford Ranger Raptor.
If you were like us and are currently waiting months and months for the Raptor (worth it BTW!!) and you'd like to see some additional content about the Raptor, please leave a comment below!
As always, thanks heaps for watching!!
Eddie
-----------------
Turbosmart BOV amazon affilate link with 15% off currently
amzn.to/44lPd7z
-----------------
Bluetti AC60 + B80 review
• Bluetti AC60 and B80, ...
For more into check out bluetti and use code: EDDIETURBO for discount
www.bluettipow...
-----------------
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/q...
License code: GK36DTZS5FCUSDGU
-----------------
#ford #offroad #raptor #uppbeat #bluetti #nextgen #fordraptor #fordranger #bluetti #lithium
Legends: Turbosmart BOV amazon affilate link with 15% off currently
amzn.to/44lPd7z
New subscriber to you channel, amazing intro😂😂 love love kove the range raptor, can't wait to get mine, place this bov definitely.
Thanks mate! They are worth the wait.
Kickboxing 24 hours a day! Loved the vid, thanks Eddie!
Thanks for tuning in sentinel!
I loved how you expressed yourself. I’d like to see more please 🙏
Thank you Hunt Down under ❤️❤️
Awesome video. Car is looking good with so many mods done.
Thank you!
Great stuff bro. I've ordered my BOV
Yewwww prepare to smile even more each time you drive!
Please do some drive by shots so we can hear what it sounds like on the road going through those gears 🙏
Good idea! I'll make a short for you!
Have to drive it to build boost and hear it
Awesome video, keep it up!
Thank you!!
Looking tough mate! The car not you. 😂
Hahaha not eshay enough
Installed mine on thursday. Sounds good. Will sound even better with the twin air intake i bought.
How good! Which intake did u go for man?
@@Eddie_Turbo Fabulous Fabrications twin filter air intake. I chose to go no snorkel. Drops right into place of the oem intake and they say the air increase is huge, lower temps and about 8hp gain so all around better. It was $1950. Just waiting on it to be delivered
@@Eddie_Turbo looks awesome too
@Eddie_Turbo I also booked mine in for the Herrod performance power pack. Gotta take it down to Vic in October. With everything I'm doing myself coupled with the Herrod upgrades I should be making about 500hp.
@@rebelrob9637 that is going to be a weapon!! I'd love to roll with no snorkel but here in the Vic high country plenty of rivers crossings! Actually waiting for arb/safari to release there's
What canopy are you using? Looks very clean on the raptor ❤
Thanks mate! It's the Maxliner Venture canopy. I'll make a quick vid of it shortly!
So that is all this gadget does is change the sound of the exhaust?
Nah mate, it doesn't change the sound of the exhaust at all, the raptor can do that from factory. This is a replacement BOV so it vents to atmosphere, a couple of benifits, it should help reduce turbo lag when you get back on the loud pedal, and allows you to run more boost in the future.
HEY! Nice truck. what's the canopy? looks good!
Hey thanks man! It's a Maxliner Venture canopy! Stay tuned, a video for that is on its way!
@@Eddie_Turbo thanks! Can't wait for the video to come out
How would you go about getting the turbo flutter?
You'd have to block the BOV off completely, remove the 3 factory bolts and make up a plate. Not quite sure what to do with the plug/sensor... Might throw some codes
@@Eddie_Turbo would an adjustable bov that you just tighten right up work?
@@jblaas2 yeah mate that would also work. Not sure what else is out there to be honest, maybe a GFB one? Let me know how you go!
just curious, does that work with 2.0 diesel too?
Not too sure mate, but I don't think so.. Modern Turbo diesels are a complex setup.
Can y introduce all mods y made. And walkaround video of monster.
I will mate, I'm making a video of the electrical system next, then the canopy. Maybe I'll make a quick short with the mods for far!
How do you satisfied with maxliner venture canopy so far. Any squeaking. Do you sealed tailgate. Is there any dust/water leakage. Thanks
@@andrej9476 very satisfied so far! No water mate but a little dust. It's not the canopy that let's it in, it's all the holes and gaps in the factory tub.
Does it void the warranty?
No, not unless the product fails and Ford can directly link the failure to a ford issue. This goes for all mods, for example, if you put on a 5" lift and 35s, and then break some CVs or steering rods, yeah you will have no warranty of those suspension items, but say your head lights stop working, well that's got nothing to do with the lift/tyres.
I bought and installed the exact same vented bov, i have less of a psssssh than the standard one and a lag down low, mine definitely doesnt make a sound while revving at idle like yours… suggestions?
@@peterlucas4800 make sure it's not leaking mate, it only goes on one way, make sure the plug is in properly and not damaged at all.
@@Eddie_Turbo everything is in correctly i followed the turbosmart install video it definitely makes noise while driving but no louder than the standard one but my standard one and the turbosmart dont make any noise at all if i rev while idling, im in New Zealand and i have read a few places the ones we get down here and oz are different in someways, not sure if the bov setup if different but ive quite a noticeable lag down low now to
Bro, what roof rack is it, is it with the integrated light bar looks cool, any directions?
Hey bro it's the Front Runner Slimsport roof rack, I used a kings light bar instead of theirs ($79 vs $550) and it does the job for the small out of night driving we do!
Sweet bro, the factory battery setup will just handle the light load? thanks for your reply man.
@@Eddie_Turbo
@@bstutt6960 yeah it's fine while driving no problems. I don't use it as a camping light though!
Mad video wish they made blow off valve for the bi turbo
I have heard some of the bi-turbos 'flutter'. Not sure if its a stainless snorkel thing or if guys have done something to make it do it!
@@Eddie_Turbo ohh wow that’s awesome I don’t have the snorkel but I would love love that flutter
@@seanlabrooy5664 100%!! Might be worth looking into! Our old 3.2 ranger would flutter, just when it was working hard in low ranger climbing hills and stuff. But it was rare and I could never make it do it when I wanted to!
@@Eddie_Turbo I’ll have to look into it I reckon there must be a way maybe with new filter setup and some other stuff