2 EazyPod Koi Ponds in One Video!!
HTML-код
- Опубликовано: 27 авг 2024
- The first pond is a 1200 gallon system running a EvolutionAqua EazyPod. The Pod is run from a 4" Bottom drain and returns via a 55w EVO55 into a single return. The pump is a Varipump 10,000L
Then there is a skimmer which feeds 3 blades.
The second pond is 800 gallons and run on a 10,000 Varipump and a EVO55UV and again, 4' drain to an EazyPod.
Excellent systems! Excellent Koi keepers.
qualitynishiki...
Very impressed with the first Koi pond. Being able to see the Koi pond viewing window from inside the house is a really nice.
Evening Tim, 2 nice Ponds with some cracking Koi in them :) thanks for sharing
Two very nice small ponds nice vidio Tim
Just goes to show that you dont need a massive pond to keep some stunning koi and get them to 2ft, very nice!
Two stunning ponds, the Eazy Pods are excellent filters.
Love the wood one just love the natural look to it
Is it just me or anyone else not in love with the viewing glass window? IDK but watching Koi from the top of the water feature isn’t the same as from the side.
Nice couple of pond there. Decent to see some smaller ones aswell. Love the channel mate wish I done this as my job be decent
Fantastic job 👍
Thanks Tim look forward to it 🍻👍
Great video as always look forward to your uploads 👌🏻
Absolutely loved the 1st pond 👍
Thsr first pond was stunning some great ideas there 👍👍.. looking forward too part 2 of the pond in Kent any idea when we will be seeing it Tim ...stsy safe 🌈🌈
Will be next week, I messed the video up.
Quality Nishikigoi I live in the us florida I have a 10ftx6ftx3ft deep with a viewing window it was all the space I had and I couldn’t dig down florida is all coral , I’m planning to buy an eazypod complete and was thinking to go gravity fed with a varipump for return also a slimmer filter and filter spillway , since it is an above ground pond do I drill the feed line as close to the bottom as possible or is there a formula I need to go by please help much thinks any ideas will help
3 showers ! That's just greedy 😄
I'm looking forward to what happens!
probably get a lot better water quality if they turn those air pumps down a bit, not sure how anything is supposed to settle and end up in the drain
Lovely pond but yeah too much splashing going on. Needs slowing down to make it a calmer more relaxing pond
@@yasinrashid probably right mate 👍 imo theres too much going on less waterfalls and aeration more relaxing slow it all down
My Friend can you show us how they put the glass windows in these ponds ? They are beautiful and want to know how the glass windows are installed or explain by getting a better shot of the glass next to the walls and explanation and point out the tips for perfect glass installation, thank you so much !!!
I am using Hose tail Elbow polyprop ( plastic ) bsp Female Thread. They don't seem to thread properly on my jesbo pump properly. I could see a leak on them If I am honest while they are supposed to fit 32mm ID pipe my pvc flexi pipe feels loose in order to get the pipe to fit I used some ptfe tape and some silicone. Then used a strong jubilee clip. This seems to give me a seal. But when I screwed the elbows onto the pumps they dont seem to screw onto the pumps right they seem tight but i have noticed a leak in the elbow whats your thoughts? The leak comes from the round tightening ring you screw onto the pump. In the future I may need to upgrade the pumps to some thing better perhaps.
The first one has never been 1200 gallons. Mines bigger than that and it's only 4000 litres.
Okay then
Hi Tim, great video showing the two Easypod setups! On the first pond, could you tell me how the skimmer runs the three blades? is there a (second) separate pump for this or does the Varipump 10,000 do all the work but with a two connections?
All best
Darren
I have the same question
I didn’t know you could fibreglass a sleeper pond, presumed the wood expanding and contracting could damage it.
Both bottom drains are chucking out a lot of air. Makes me think I shoukd turn up the air on mine?
Great video Tim question if I may can I put k1 micro in my nexus 200 as in just put it in the original Eazy ?
Would an easy pod manage a 1800 gallon pond?
I don’t think so
Hi, Where does the skimmer connect to the eazy pod?
Have an easy pod on my pond . Just considering replacing the K1 with the micro version . Would this improve the fines removal . Notice micro is used on the bigger nexus filters 👍
I've replaced the K1 with K1 Micro, definite improvement with fines and water clarity.
what phone do you use to go under water.
What are Eazy pod like on the biological side of filtration? Or are they mainly mechanical 👍
As long as you don’t overstock they are good for both.
woow 😍👍
Hi mate how much does it cost roughly to fibre glass the second pond thinking of doing a sleeper pond ours would be 10 x5 x4 cheers
As a rough guide mine came in at around £50 per square metre , to have it done professionally . That was 5 years ago 👍
hippo cheers buddy 👍🏻
Hi mate weres the kent pond bye the way lovl the pond
Hi Tim, could you tell me where I can get the glass surrounds for my pond?
You should be able to sort toughened glass from a local supplier, Google glass suppliers in your area....... The glass clamps are used on glass staircases or balconies so search these also, they are also for sale on Ebay and Amazon but make sure that you get 316 stainless steel (316 is the grade) as they will not rust......
Patrick Sheringham thanks ever so much for the info 👍
Hi Tim need your help buddy I’m building 2 ponds doing small one first for growing Then the bigger pond .for the smaller pond could you give me a price for a EazyPod and everything else needed with it and for you to install it cheers mike we are only on the Wirral pal
Give me a bell at shop mate
Quality Nishikigoi will do pal cheers