When he pulled the string I thought "wouldn't that strap need those magnet buttons or something" and then he tied the string around the strap and the shape makes sense now. Brilliant! 😭
I am beyond happy this popped up in my feed! It was incredibly satisfying to watch and the urge to make a fleet of these with my old bags is now very high.
I totally learned something new today. I've been doing leather work for years AND Dremel work for years, and never thought for a second about combining the two to drill threading holes. Thank you for that tip.
Thanks and love the calm music behind it, makes me feel like I was there watching you do it, for me is the best way to learn, looking at someone doing and enjoying the process.
Thanks for your feedback my friend 🤗 I’m glad you enjoyed my video and found it interesting as well 👍🏻 Now I hope you’ll be inspired to make such a purse yourself 🏕🔥🌲 Tom
That's really nice - and a clear presentation too. I don't really need one...but I sure as heck am going to make one...or two...now!I just had a thought, I have an old leather belt (with stitching holes already along the edge) that should work fine for the spine.
Thank you so much for showing this! I have been searching for someone to show how to make this and I found some, but no measurements were given. I am so green on leather working and you have given me the best instructions.
I’m glad you could use my video 😁👍🏻 and I appreciate your feedback very much. Hope you’ll consider subscribing to this and my main RUclips channel 🤗🏕🔥Tom
10:00 If I can offer one bit of advice... use 2 needles and thread. Start one on the bottom, working up and the second on the top, in the same hole, working down. This way you have complete stitches all the way from beginning to end, instead of every other stitch. Just a thought.
I just made this today! I worked 11 hours straight(3 A.m till 2 P.m.) on it, I made it out of deco vinyl since I didn't have any leather and wanna get at least decent at it before I comit to purchaing the leather, it turned out a bit wonky due to my misplacement of the strip over the lacing holes, its by no means my best leather type craft that I've done but overall I'm really happy with it!
That is so cool 😎 I think it’s awesome that you can use an alternative material for the pouch 😁👍🏻 and made it 💪🏻 And I’m sure you’ll make it just perfect next time 🏕🔥 Tom
Thank you so much Jenny 🤗 I’m glad you found my channel and like my DIY videos 😁👍🏻 and I hope you’ll enjoy my other videos on my other RUclips channel Cimbrer Bushcraft Viking Heritage 😉🏕🔥🌲🐕Tom
This is very cool! Thank you. I really like the music you played during this. A lot of videos have annoying percussion but this was nice and soothing and set th emood.
Just stumbled a crossed your video this morning, and WOW sure glad I did. What a wonderful pouch and well done video. I also enjoyed the music, very fitting. Will be watching more of your vids. ( fyi, from USA)
@@diycimbrer Thank you, I will watch those videos also. Have a Viking Fine Day, ( " Stand by your own trial and not by what others say.") - Gudmundur Jonsson
Thank you for your channel and great videos. I have also started viking reneactment and i have enjoyed your videos and DIY videos lot. I actually now started to make similar bag using your instructions or tutorials as guide.
Thank you so much for your feedback Sami 🤗 I’m so glad you can use my DIY videos for making your own Viking gear and think it’s wonderful that you are beginning reenactment like me 🏕🔥 Tom
@@diycimbrer Your welcome and thanks again for great content. Your great DIY tutorial videos were kind of reason i also bought leather workshop kit and i have also plans to make DIY frame pack like you did (from birch wood i belive).
I saw on your website you’re an ornithologist. That’s awesome. I am a birdwatching enthusiast. I know all of my native birds and their calls. When I’m out doing anything I will stop dead in my tracks to observe interesting birds, especially ones I’ve never seen. It’s fun to catch birds as they migrate and see birds that are not supposed to be in your area. Did you know in Maryland USA we have a bird called the cow bird who is kind of similar to the cuckoo of Europe? They lay an egg in another bird’s nest for them to raise. They are very ugly though and have an unpleasant call. Still it’s part of nature. 😅
I was having a little trouble making the holes around the circumrerence come out even. First I drew a line through the center and used a protractor and marked every 20 degrees around one side of the protractor. Then I drew a line from each of those marks through the center to the other side of the circle. 20 degrees each - 18 holes came out perfect. With this method the size of the circle can be adjusted to make a larger or smaller bags.
I love the music, the everyday tools you've used - such as a crappy pair of scissors and biro - and of course the fanbloodytastic pouch. I'm in the process of making a lady's Victorian hat for the races but I now NEED a viking/Norse belt pouch to go with it. Subscribed!
Would it be possible to use an oval instead of circle to create a deeper pouch? I have a hard time visualising what would happen to the sides and if it'd close properly. I feel it would work but the bellows "mouth" would be curved.
Hey this looks greatt i was wondering though why didn't you leave out a space for the belt in the thick strap down the center instead of sewing the whole thing across and opting to put an extra loop on it for belt insertion?
@@diycimbrer you're welcome. I wasnt suggesting i honestly was asking.. like if it was for structural purposes... i just wanted to know not undermining your work or anything....honestly.
Kool... I'm thinking about trying out your template for a DIY coin bag. I'm using one of my mom's old leather bags and an old shirlt for the inner lining. Burundi polyester, should be good with the brown leather right? I probably gonna have to press out a fork to make the punch tool though. I just don't have that kind of thread to sew the leather. Can you tell me what kind of thread you use? Size and make (material)? Thanks
I’m glad you like my little pouch 🤗 and are going to make one for yourself 👍🏻 and I’m sure it’ll work with the material you have. I use waxed linen 🧵 thread Size I don’t know 🤔 but you can use ordinary sewing thread Let me know how it turns out 😁🏕🌲🐕 Tom
This is great and I'm deciding to make it with my leather but is it okay if the measurements of the first big circle are 9.3 cm? then the second circle will be 8 cm? then same for the belt thing.... it will be about 23.3 cm in length and 4 cm in width? then how small would it be now ?
Hi Tom! Nice to see your channel expanding over here! I was worried at first someone was stealing your ideas. I’ve subscribed here, and of course your other channel years ago lol.
Nicely done, but wouldn't you save time and work just using a prong punch? I use the dremel for burnishing, but I feel that a drillbit would damage the leather. And as for the running stich... I haven't seen good results, usually the leather gets this "wavy" shape
Translation for all us nerdy people out here: how to make a Norse style dice bag to hold your D&D gear.
Exactly! LOL!
Dude, I play D&D AND dress as a Viking.
@@Shadowmib , this is a mach made in Valhalla for you then good buddy. Skól to you and your gaming group.
You had me at Norse...
That's for nerd's I'm making a utility belt 😉
When he pulled the string I thought "wouldn't that strap need those magnet buttons or something" and then he tied the string around the strap and the shape makes sense now. Brilliant! 😭
Ha ha thanks Chi 🤗 I’m glad you like my video and pouch and grateful that you came along and joined me 🏕🔥
Tom
Thanks a lot my friend 😁👍🏻
I am beyond happy this popped up in my feed! It was incredibly satisfying to watch and the urge to make a fleet of these with my old bags is now very high.
I’m glad you like my video Julia 😉👍🏻 and appreciate your feedback very much
Tom
I totally learned something new today. I've been doing leather work for years AND Dremel work for years, and never thought for a second about combining the two to drill threading holes. Thank you for that tip.
Your welcome my friend 🤗 and I’m glad you like my tip and Viking pouch. 🏕🔥🌲
Tom
That is a beautiful leather belt pouch. You are a true craftsman. That was a wonderful video. Thank you.
Vikings were one of the most feared and respected peoples we know, and they had purses, high heels and wore skirts
🟥🍁🟥
Ha ha thanks for your feedback my friend 😆🏕🔥
Tom
Thanks and love the calm music behind it, makes me feel like I was there watching you do it, for me is the best way to learn, looking at someone doing and enjoying the process.
Thanks for your feedback my friend 🤗 I’m glad you enjoyed my video and found it interesting as well 👍🏻
Now I hope you’ll be inspired to make such a purse yourself 🏕🔥🌲
Tom
That's really nice - and a clear presentation too. I don't really need one...but I sure as heck am going to make one...or two...now!I just had a thought, I have an old leather belt (with stitching holes already along the edge) that should work fine for the spine.
What a great upcycling idea!
lost me for most of the project until the last part have to said amazing how simple it is
Thank you so much for showing this! I have been searching for someone to show how to make this and I found some, but no measurements were given. I am so green on leather working and you have given me the best instructions.
I’m glad you could use my video 😁👍🏻 and I appreciate your feedback very much. Hope you’ll consider subscribing to this and my main RUclips channel 🤗🏕🔥Tom
Лайк за золотые руки!!!
I just made one of these and it's great! Awesome instructions!
Thanks a lot my friend 😁👍🏻 and I’m glad you made one yourself 🔥
Tom
I like the contrast of the stitching on the flap vs the band around the bad. Pretty work.
Great project!
Yet another beautiful job, you truly are an inspiration Tom,, 👍
Thanks John 🙏🏻😉
Hello Tom, this is a nice little Pouch. I made one myself after I see it in your Video.
That’s great Uwe 😁👍🏻 and appreciate your feedback very much 🏕🔥🌲🐕Tom
Weich ein Kunstwerk, danke für das großartige Video...:)....liebe Grüße aus Wien
Your welcome my friend and thanks for your feedback 🤗
Tom
Great Work Tom.👍LG Christine
Thanks a lot my friend 🤗 I m glad you like it my friend 🏕
Tom
Great piece of leather craft 👍
10:00 If I can offer one bit of advice... use 2 needles and thread. Start one on the bottom, working up and the second on the top, in the same hole, working down. This way you have complete stitches all the way from beginning to end, instead of every other stitch. Just a thought.
Thank you so much Timothy for your great advice 😁👍🏻 I appreciate that very much and glad you are watching my DIY videos 🤗🏕🔥🌲Tom
Wonderful
Thank you so much 🤗 I’m glad you liked it 🏕🔥🌲🐕
Tom
Nice work it's very gratifying to see the leather taking shape with each step, it's a shame not to see more so often👏👏👏
I just made this today! I worked 11 hours straight(3 A.m till 2 P.m.) on it, I made it out of deco vinyl since I didn't have any leather and wanna get at least decent at it before I comit to purchaing the leather, it turned out a bit wonky due to my misplacement of the strip over the lacing holes, its by no means my best leather type craft that I've done but overall I'm really happy with it!
That is so cool 😎 I think it’s awesome that you can use an alternative material for the pouch 😁👍🏻 and made it 💪🏻
And I’m sure you’ll make it just perfect next time 🏕🔥
Tom
Very good job Tom. Great!
What a wonderful piece!
I just love the craftsmanship!
Pure art...
Thanks for watching my videos and for your kind feedback 🤗🏕🔥🌲Tom 🇩🇰
That looks pretty good :D Also, glad to see more leatherworkers from DK
Thank you so much 😁I’m glad you like it👍🏻🇩🇰
Tom
Buen día desde Cali valle Colombia 🇨🇴 soy nueva en tu canal mil Gracias es hermoso lo que enseñas bellísimo este bolsito ❤🙏👍
Thank you so much Jenny 🤗 I’m glad you found my channel and like my DIY videos 😁👍🏻 and I hope you’ll enjoy my other videos on my other RUclips channel
Cimbrer Bushcraft Viking Heritage 😉🏕🔥🌲🐕Tom
Great piece of gear you made there Tom , and love the mjolnir you carved on the buitiful chest too thank you great vid again
Your skill is amazing!!! ✂️⚒️
Deadly little pouch I will give it a go. Thanks for sharing it
I like this type of videos. New sub. Hugs from México.
Thank you so much Manuel 😁👍🏻 I’m glad you like my videos and hope you’ll subscribe to my other channel Cimbrer Bushcraft Viking Heritage 🏕🔥Tom🇩🇰
this is so amazing! i am completely blown away at this gorgeous work
Thanks a lot my friend 🤗 I’m glad you like my video and the pouch I make. Appreciate your feedback very much 🏕
Tom
This is very cool! Thank you. I really like the music you played during this. A lot of videos have annoying percussion but this was nice and soothing and set th emood.
I’m glad you like my video and the music I chose for it
😁👍🏻 Thanks for your kind feedback my friend 🏕🔥🇩🇰
Tom
Try saddle stitch. A sliding bone/horn toggle would be nice too.
Beautiful Tom, now I will make one myself 😊
Just stumbled a crossed your video this morning, and WOW sure glad I did. What a wonderful pouch and well done video. I also enjoyed the music, very fitting. Will be watching more of your vids. ( fyi, from USA)
Appreciate that very much and hope you’ll enjoy the videos on my other channel Cimbrer Bushcraft Viking Heritage 🤗🏕🔥🌲🐕🇩🇰
Tom
@@diycimbrer Thank you, I will watch those videos also. Have a Viking Fine Day, ( " Stand by your own trial and not by what others say.") - Gudmundur Jonsson
WOW! Very nice!!!
Thanks 😁👍🏻 glad you like it 🏕️🔥🌲 Tom
I learn so much, Thanks Tom, keep it coming
Thank you for your channel and great videos. I have also started viking reneactment and i have enjoyed your videos and DIY videos lot. I actually now started to make similar bag using your instructions or tutorials as guide.
Thank you so much for your feedback Sami 🤗 I’m so glad you can use my DIY videos for making your own Viking gear and think it’s wonderful that you are beginning reenactment like me 🏕🔥
Tom
@@diycimbrer Your welcome and thanks again for great content. Your great DIY tutorial videos were kind of reason i also bought leather workshop kit and i have also plans to make DIY frame pack like you did (from birch wood i belive).
That’s great my friend 😉👍🏻 and I hope you’ll make a great pack frame and in birch wood like mine 🏕🔥🌲Tom
Cool video . Sincerest thanks for sharing😁
Дуже гарно! І музика прекрасно підходить до відео.
Please in English 🤗🏕🔥🇩🇰
Tom
Very nice!
A nice mellow video loved the content
Thank you so much Susann 🤗 I’m glad you enjoyed it
Tom
That is a great project!
Thanks a lot my friend 😁👍🏻I’m glad you like my little pouch 🏕🌲
Tom
Super. Amazing master work.
Thank you so much for your kind words 🤗🏕🔥🌲Tom
Thank you Tom for sharing your belt pouch. I will be making one
Great job!!! Congratulations !!
Thank you so much Cecilia 🤗 I’m so glad you like my video and belt pouch 👍🏻 and I appreciate your feedback very much 🏕🔥🌲🐕Tom
i love it!
i might just have to make a couple that are a little bit bigger. they would look great with my kilts.
you got me to subscribe
That’s great 😁👍🏻 and thanks for the feedback
Tom 🏕️🔥
Simplemente maravilloso trabajo amigo saludos
Thank you so much 🤗 I’m glad you like it 👍🏻
Tom
I'm use this to make holders for my 6 tone ocrina and my mini steel tounge drum this be great for ren fair
That’s great 😁👍🏻and I’m glad if I could inspire you 🤗🏕🔥🌲
Tom
So nice,Tak
Job well done
awesome share
I’m glad you like it 😁👍🏻 and appreciate your feedback very much 🏕🔥🌲Tom 🇩🇰
Beautifully made work.
I’m glad you like it and I appreciate your feedback very much 😁👍🏻🏕🔥Tom
I saw on your website you’re an ornithologist. That’s awesome. I am a birdwatching enthusiast. I know all of my native birds and their calls. When I’m out doing anything I will stop dead in my tracks to observe interesting birds, especially ones I’ve never seen.
It’s fun to catch birds as they migrate and see birds that are not supposed to be in your area. Did you know in Maryland USA we have a bird called the cow bird who is kind of similar to the cuckoo of Europe? They lay an egg in another bird’s nest for them to raise. They are very ugly though and have an unpleasant call. Still it’s part of nature. 😅
No I didn’t know that 😁 but very interesting 👍🏻 and thanks for sharing this with me and for watching my DIY channel as well 🏕🔥🌲Tom
Wowww I adore this 😊
Very good job!
Thanks a lot my friend 😁👍🏻 I’m glad you like it and I appreciate your feedback very much 🤗🏕🔥🌲Tom
excellent pouch for my possibles.
That’s great 😁👍🏻 and thanks for your feedback 🔥
Tom
Well done.
Thanks Dave 🤗👍🏻 I’m glad you like it my friend 🏕🤗🌲
Tom
You may want to think about having your ring resized....Love the video!
Which one? They all look ok to me.
I thought the same thing... made my finger hurt just looking at it! 😮😂
Es una preciosidad !! Me encanta ....hay posibilidad de conseguir patrón aunque sea pagandolo ????....me encantaria hacerla .....gracias 😘😘
Go to my website: cimbrerbushcraft.com and I have a template for it then 😁👍🏻🏕🌲
Tom
I was having a little trouble making the holes around the circumrerence come out even. First I drew a line through the center and used a protractor and marked every 20 degrees around one side of the protractor. Then I drew a line from each of those marks through the center to the other side of the circle. 20 degrees each - 18 holes came out perfect. With this method the size of the circle can be adjusted to make a larger or smaller bags.
That sounds like a great way to do it Terry 😁👍🏻 and thanks for sharing this with us. I appreciate that 🏕🔥🌲
Tom
Absolutely beautiful build!! Probably going to make one of these tonight. Thanks for the simple instructions!!
Your welcome Joshua 😉👍🏻 I’m glad you like my diy video and appreciate if you want to make a Viking pouch yourself
See you again soon 🏕🔥🌲
Tom
Excellent! I have made two so far and they look great! Thank you so much !!!
That’s great Renita 🤗 and I’m grateful for your feedback my friend 🏕🔥🌲
Tom
Beautiful work Thanks you
Your welcome 😁👍🏻 and thanks for watching my video
Tom 🏕🔥🌲🐕🇩🇰
I love the music, the everyday tools you've used - such as a crappy pair of scissors and biro - and of course the fanbloodytastic pouch.
I'm in the process of making a lady's Victorian hat for the races but I now NEED a viking/Norse belt pouch to go with it. Subscribed!
Ha ha that’s great Julie 😁👍🏻 I’m glad you like the pouch and want to make one yourself. Thanks for subscribing to my channel🤗
Tom
Awesome Workmanship looks cool 😎 👌
Thanks a lot 😁👍🏻 I’m glad you like it 🏕🔥
Tom
Simple, beautiful, awesome!
It’s so beautiful! Thank you very much! 🌸💕🌸😄👍
Beauty!
Very nice, thanks Tom. I just subscribed , I almost forgot that you had started this other channel .
Me too. Don't even know how I missed the announcement.
Tom. You should give it another push from your main channel.
Very nice 👌, I'll definitely be trying to make one using your ideas 💡. Thank you my friend 😍 excellent video. Keep them coming 🤩
Very interesting and informative instructional video. Thank you
Nice. Some people are just sooooo talented! 💛 💙
Thanks for your kind words my friend 🤗🏕🔥🌲 Tom
really nice gonna give this a go tyfs
That’s great 😁👍🏻 and thanks for your feedback 🏕
Tom
Super Design I will try it 🙂👍👍
Thank you so much this was so helpful!!
Glad you like it John 😁and find it interesting
Thanks for watching my DIY videos 🏕🔥🌲
Tom
It's beautiful!
I am very impressed 👌👌
Great work.
Thank you so much for your kind words 😁👍🏻 I’m glad you like my little Viking pouch video 😁🏕🔥🌲🐕 Tom🇩🇰
Beautiful !!!!
I really like the video, thank you I enjoyed it very much.
New subscriber 😉👍🏼
Thanks a lot Milton 😁👍🏻 appreciate your support and kindness very much 🏕🔥🇩🇰
Tom
Nice one Tom 😉
always wondered how🤷♂🤷♂ now i know TY👍🏻
Nice.Thanks
Your welcome 😁👍🏻and glad you found it interesting 🏕️🔥Tom
Lovely!
I’m glad you like it 😁👍🏻and appreciate your feedback very much 🤗🏕🔥🌲Tom
This looks A M A Z I N G.
Thank you so much Sun 🤗 I’m glad you like it 🏕🔥🇩🇰
Tom
Would it be possible to use an oval instead of circle to create a deeper pouch? I have a hard time visualising what would happen to the sides and if it'd close properly. I feel it would work but the bellows "mouth" would be curved.
Hmmm 🤔 never tried that but I would give it a try if I were you 😁👍🏻 My guess is that it would work great 😉
Tom
Belissimo trabalho
Thank you so much 😁and grateful that you are watching my DIY videos 😉👍🏻🏕🔥🐕
Tom
TIL: you can use a drill to make holes 😭😭😭 in leather work the only part I find enjoyable is the sewing part. So what an absolute game changer! 😊
Thanks for your tip 😉 and sometimes I also use a drill for making holes in leather 👍🏻😁
Tom
It's great but I don't use the metric system, so I worked it out into inches. I do like it.
So cool the nordic vikings of old had new age glue
Ha ha That’s right isn’t that amazing 😆😂🤣👍🏻🏕🔥
Tom
@@diycimbrer They probably used rabbit glue
Hey this looks greatt i was wondering though why didn't you leave out a space for the belt in the thick strap down the center instead of sewing the whole thing across and opting to put an extra loop on it for belt insertion?
That would probably work too 😉👍🏻 and I appreciate your suggestion very much
Thanks for watching my videos 🤗🏕🌲🔥
Tom
@@diycimbrer you're welcome. I wasnt suggesting i honestly was asking.. like if it was for structural purposes... i just wanted to know not undermining your work or anything....honestly.
I understand 😁👍🏻 and I just say it can be done in different ways 🤗
Kool... I'm thinking about trying out your template for a DIY coin bag. I'm using one of my mom's old leather bags and an old shirlt for the inner lining. Burundi polyester, should be good with the brown leather right? I probably gonna have to press out a fork to make the punch tool though. I just don't have that kind of thread to sew the leather. Can you tell me what kind of thread you use? Size and make (material)? Thanks
I’m glad you like my little pouch 🤗 and are going to make one for yourself 👍🏻 and I’m sure it’ll work with the material you have. I use waxed linen 🧵 thread
Size I don’t know 🤔 but you can use ordinary sewing thread
Let me know how it turns out 😁🏕🌲🐕
Tom
Pretty nice but small😉
It was mostly used for coins and hacksilver😉 so great for that 😁👍🏻
Tom
This is great and I'm deciding to make it with my leather but is it okay if the measurements of the first big circle are 9.3 cm? then the second circle will be 8 cm? then same for the belt thing.... it will be about 23.3 cm in length and 4 cm in width? then how small would it be now ?
Ahh I’m not good at math 🥴 but make a template first in paper and see if it fits 😉👍🏻
Tom
@@diycimbrer thanks, i'm wondering what color you used for your dye? 😀😀
So cute, but would never hold all of my treasures. Might try a bigger one.
Yeah you can definitely do that Pamela 😉👍🏻 and I hope it’ll work for you 🏕🔥Tom
Hi Tom! Nice to see your channel expanding over here! I was worried at first someone was stealing your ideas. I’ve subscribed here, and of course your other channel years ago lol.
Yeah and I appreciate that very much my friend 🤗🇩🇰 Tom
Thank you so much 😁👍🏻
Tom
Nicely done, but wouldn't you save time and work just using a prong punch? I use the dremel for burnishing, but I feel that a drillbit would damage the leather. And as for the running stich... I haven't seen good results, usually the leather gets this "wavy" shape
Yeah I guess that could work too 😉👍🏻 But there’s many ways and techniques you can use for leather work and just use what you are used to 🔥
Tom
Is there a reason both glue and stitching are used? Is the stitching not strong enough by itself? Thank you for the pouch-making inspiration!
Yes 👍🏻 😄 it is but the glue helps when doing the stitching … keeps it in place
Tom