Thanks for the review. Just one bit of clarification on the inductive charging - you can inductive charge through the case. It just doesn't have the magnet capability for alignment to MagSafe specific chargers. We offer a universal benchtop charger as well as inductive charge versions of our vehicle mount and armor mount, which allow the case to securely snap in. Most of our users need that secure snap in feature due to the environments they're operating in, and a magnet doesn't quite lock it in as well. 🙂
Can you please test a MagSafe charger with this case? Very curious as to if I need to sacrifice wireless charging for this. I am definitely spoiled to MagSafe. I haven’t plugged anything into my phone in months.
Thanks for the Review. I bought both the ADVNTR & ENDVR . I definitely like them both for my iPhone 15 Pro Max Plus. However I tend to like the ENDVR and use this rather than the ADVNTR.
@@BlackFlagSummitClub The ENDVR is Front Load install like most cases and a little bit more of a Slim Design than the ANDVR but still just as tough and easy to pocket, its also still compatible with the full range of mount options I have from my old one which is good. Quick access to charge port, as well as wireless charge friendly. The ADVNTR is a TOP LOAD with secure a secure latch. Just a tad bulky. I definitely like the new models better than the old tight fitting one. I always have an Invisishield glass screen protector installed on my new phones every time I buy a new phone and the older cases where so tight fitted, that the screen protector would peel off the corners when you slide it in. The new ones don't do that. The only Negative thing I have to say about both cases is some of my charging cables I bought will not fit because the hole diameter is smaller. I've been using Juggernaut cases for years back in my Military DOD years and I have been satisfied with the quality. The new models is definitely an upgrade and better than the old models. It's really a matter of personal preference and your style. I swap cases between ENDVR & ADVNTR when I'm traveling on business or when I'm outdoors Climbing , skiing, and Military Desert shooting Range time and I can use the same CLIP.MOUNT MULTI-PURPOSE STRAP, PACK, BELT
The big question I have that no one answers in reviews... How loud is the phone audio with the case on? I see it has holes in the rubber bottom cap, so the mic and speaker aren't plugged closed, but do people have issues hearing you when on phone calls? And is the speakerphone loud enough to use with the case on? Will I still be able to hear my ringtone playing? For everyday listening, I have Bluetooth speakers and earbuds, but I'm more worried about ringtones and phone call audio with that bottom cover. Also, the bottom cover-what does it protect if the phone needs to be waterproof? I'm hoping it just keeps water out of the charging port. My new S23 is waterproof, but when water gets into the charging port, I have to wait 8-12 hours before it will let me charge again. That's what I'm hoping to avoid. The mounts are why i want this case but i also want to use it every day because I am rough on phones. I just don't want my phone to be a lemon with the case on.
At least with both the iPhone 13/15pro - I did not notice any degradation in the sound quality of either the microphone input or the speaker output. The ringer was also not impacted that I noticed.
Pelican makes a lens protector for the s23 ultra that i believe fits with this case i will report back here when i get my case to confirm whether it does or not.
I seriously don't see why they're so expensive. Not much information on the case themselves on the site but they do quote tv personalities ( like I give a sh*t). They also tell you your phone is rated IP 68 already. They should go the extra mile and say the first two things that voids your warranty is water and dust. There are other better and cheaper cases out there.
What cases do you recommend. Completely genuine question. I have a S22 ultra and haven't found one case I like. Ordered at least 30 cases in the past 2 years. Had the Pelican Voyager for Samsung Active but for the Ultra the Voyager doesn't cover the edge of the screen and only comes in clear. I am in construction so clear looks good for about 10 minutes.
Ive heard good things about OtterBox if protection is your main perogative. I got the Juggernuagt for Its ability to be mounted to my chest rig with the PALs mount. There Rest is just a bonus.
Youre not wrong buy keep in mine that got the Juggernuagt specifically for Its ability to be mounted to my chest rig with the PALs mount - to make use of my drone easier, being able to flip my Phone down, use it hands free for navigation while on the move - Rest is just a bonus for me. If budget is primary deciding factor and you dont mind a “one size fits most” design - there are Phone boards like the ones made by Persec Gear that fit a large variety of phones regardless of what case you are using. If Its just a case youre after then Yeah maybe paying a premium for the Juggernugt or KAgwerks doesnt make much sense.
Yes. I have one. Any glass screen protector that is case compatible (99% are) will work just fine. Also you won't lift it up by putting the case on and off either.
@messdkilla4877 Obviously not. For $80 plus it should be. They should make their own and charge $90 just for the screenprotector. Idiots would buy. As long as they put a Mike Rowe quote in the advertising.
Great reviews, and I like your pictures on Instagram. By any chance, did you get to ask Juggernaut Case if they were going to come out with the HAHO/HALO mount for the Garmin 801 Foretrex? Thanks.
Thanks for the review. Just one bit of clarification on the inductive charging - you can inductive charge through the case. It just doesn't have the magnet capability for alignment to MagSafe specific chargers. We offer a universal benchtop charger as well as inductive charge versions of our vehicle mount and armor mount, which allow the case to securely snap in. Most of our users need that secure snap in feature due to the environments they're operating in, and a magnet doesn't quite lock it in as well. 🙂
Awesome! Thank you for providing this clarification guys!!! That is very good to know! 🙏🙂
Can you please test a MagSafe charger with this case? Very curious as to if I need to sacrifice wireless charging for this. I am definitely spoiled to MagSafe. I haven’t plugged anything into my phone in months.
Juggernuagt cases are NOT magsafe compatible
Thanks for the Review. I bought both the ADVNTR & ENDVR . I definitely like them both for my iPhone 15 Pro Max Plus. However I tend to like the ENDVR and use this rather than the ADVNTR.
What do you like about the ENDVR vs the ADVNTR?
@@BlackFlagSummitClub The ENDVR is Front Load install like most cases and a little bit more of a Slim Design than the ANDVR but still just as tough and easy to pocket, its also still compatible with the full range of mount options I have from my old one which is good. Quick access to charge port, as well as wireless charge friendly. The ADVNTR is a TOP LOAD with secure a secure latch. Just a tad bulky. I definitely like the new models better than the old tight fitting one. I always have an Invisishield glass screen protector installed on my new phones every time I buy a new phone and the older cases where so tight fitted, that the screen protector would peel off the corners when you slide it in. The new ones don't do that. The only Negative thing I have to say about both cases is some of my charging cables I bought will not fit because the hole diameter is smaller. I've been using Juggernaut cases for years back in my Military DOD years and I have been satisfied with the quality. The new models is definitely an upgrade and better than the old models. It's really a matter of personal preference and your style. I swap cases between ENDVR & ADVNTR when I'm traveling on business or when I'm outdoors Climbing , skiing, and Military Desert shooting Range time and I can use the same CLIP.MOUNT MULTI-PURPOSE STRAP, PACK, BELT
@@BlackFlagSummitClub The Accessories like the Belt Clip I had from the older model fits on the new ones.
The big question I have that no one answers in reviews... How loud is the phone audio with the case on? I see it has holes in the rubber bottom cap, so the mic and speaker aren't plugged closed, but do people have issues hearing you when on phone calls? And is the speakerphone loud enough to use with the case on? Will I still be able to hear my ringtone playing? For everyday listening, I have Bluetooth speakers and earbuds, but I'm more worried about ringtones and phone call audio with that bottom cover.
Also, the bottom cover-what does it protect if the phone needs to be waterproof? I'm hoping it just keeps water out of the charging port. My new S23 is waterproof, but when water gets into the charging port, I have to wait 8-12 hours before it will let me charge again. That's what I'm hoping to avoid.
The mounts are why i want this case but i also want to use it every day because I am rough on phones. I just don't want my phone to be a lemon with the case on.
At least with both the iPhone 13/15pro - I did not notice any degradation in the sound quality of either the microphone input or the speaker output. The ringer was also not impacted that I noticed.
Waiting for the s24 ultra case next month
Good review and it has some good upgrades.
Nate
TY, and yes I would have to agree
Pelican makes a lens protector for the s23 ultra that i believe fits with this case i will report back here when i get my case to confirm whether it does or not.
Any update?
I use this with my Juggernught on my 15pro -
a.aliexpress.com/_mMvh7ma
@didyouknow3360 the pelican lens covers do in fact fit with the juggernaut case im happy to say
Can the iPhone 13 Pro Max, fit inside the Endvr case even if it’s slightly thicker?
The cases for the 13 pro max (IMPACT) are just not it for me atm.
I have no experience with the pro max just the 13pro and the 15pro
I seriously don't see why they're so expensive. Not much information on the case themselves on the site but they do quote tv personalities ( like I give a sh*t). They also tell you your phone is rated IP 68 already. They should go the extra mile and say the first two things that voids your warranty is water and dust. There are other better and cheaper cases out there.
What cases do you recommend. Completely genuine question. I have a S22 ultra and haven't found one case I like. Ordered at least 30 cases in the past 2 years. Had the Pelican Voyager for Samsung Active but for the Ultra the Voyager doesn't cover the edge of the screen and only comes in clear. I am in construction so clear looks good for about 10 minutes.
It's been 2 weeks since these comments, still no response?
Ive heard good things about OtterBox if protection is your main perogative. I got the Juggernuagt for Its ability to be mounted to my chest rig with the PALs mount. There Rest is just a bonus.
Youre not wrong buy keep in mine that got the Juggernuagt specifically for Its ability to be mounted to my chest rig with the PALs mount - to make use of my drone easier, being able to flip my Phone down, use it hands free for navigation while on the move - Rest is just a bonus for me. If budget is primary deciding factor and you dont mind a “one size fits most” design - there are Phone boards like the ones made by Persec Gear that fit a large variety of phones regardless of what case you are using. If Its just a case youre after then Yeah maybe paying a premium for the Juggernugt or KAgwerks doesnt make much sense.
Appologies - ive been super busy with Other endeavors and Being on course.
Can you use a tampered glass screen protector with this case? Like the belkin one apple sell? Thanks
Yes. I have one. Any glass screen protector that is case compatible (99% are) will work just fine. Also you won't lift it up by putting the case on and off either.
How about the belt mount how to rotate on horizontal
I have no personal experinece with the Belt Clip unfortunatly.
Nice. Thanks
Most welcome! Hope you got something out of it 🙂
I've had my advntr case for my galaxy s24 ultra and it's 🤌🏾. Best case out there!!!
Is it compatible with Tempered Glass Screen Protectors?
@messdkilla4877 Obviously not. For $80 plus it should be. They should make their own and charge $90 just for the screenprotector. Idiots would buy. As long as they put a Mike Rowe quote in the advertising.
Does it come with a glass protector?
It does not
Good info.
Glad it was helpful!
Great reviews, and I like your pictures on Instagram. By any chance, did you get to ask Juggernaut Case if they were going to come out with the HAHO/HALO mount for the Garmin 801 Foretrex? Thanks.
Thank you! I will find out for you. Wait one.
An $85+ rugged case not having some kind of mechanical lense protection is a huge miss
They are working on such a product - it may even be available ok thier site now.
Wtf is up with that hat .