We have a plate law in Washington but I love my front plates. My challenger came with front holders that I love because it holds the plate tilted downward which with my custom U of W purple plates and custom license of the name of one of my dogs who died it looks exceptional. The tilt downward of holder makes for a very aggressive look.
I'm in NJ too. I just ordered this plate mount after viewing your great installation video. I too do not want to drill the nose of my new Hemi Scat Pack Shaker Widebody Challenger or be constantly pulled over. Thank you!
Just a heads up for those of us with Adaptive Cruise, this top mount version DOES WORK with adaptive cruise. This has been confirmed by Sto-N-Sho. The correct part number is sns1e.
Same for NJ, we have tons of petitions. The problem is the state cars have plate scanners that capture and ID plates as cars pass. It's a great system to find stolen cars, outstanding warrants, expired tags, etc. I don't see them giving up the ability to do this especially in a vary heavy traffic state like NJ.
Ordered mine yesterday from Amazon got it today. Works great looks great. You can mount the plate in the middle of the bumper or off to the side. Looks like the plate it floating. Pretty sweet. . I’ll tell you guys though. You’ll need that star shaped screwdriver head to get the screws off your car bumper. And a small socket wrench 🔧.
That’s a great option for the ability to have a front plate and not having to drip holes in the beautiful front bumper! As alway GREAT install video brother!
I bought the same model for my HC and I love it. I don't need the front plate right now but every time I go back to Texas I put it on. I also used a smoked lens cover for the front plate as well.
I had a Sto-n-Sho on my scat for 2 weeks. The metal plate that the rods slide into were soft soldered instead of welded. I hit a bump, the solder seperated from the bracket and the plate and rods fell off with me running over the plate assembly. I was fortunate to not cause damage to my tires or undercarriage. If they would switch to welding instead of solder, I'd consider re buying again, but not until then.
You dont have to worry about putting officers lives in danger, if they dont want to risk it for the high pay, they can quit. Not to mention Bergen county cops are jerks in general. I know where that picture is in the cliffs, which is part of the reason why I left the county. Mercer county cops are MUCH better. Had my scat for 2 months and so far no one has bugged me yet. Im sure a couple days at the shore will change that.
It's a nice solution. Only part I don't like is that now my plates can be stolen simply by depressing the pin. So now I have to go through the trouble of filing a stolen plate report
Thanks for the video! I only recently discovered that this device exists! Can't wait to order it for my next car :) I live in TX so 2 plates for us. Contrary to a lot of car enthusiasts I actually support front plate laws. I've seen way too many videos of ppl w/o front plates hitting and running cars. Plus, when you're driving the car, you don't see the front 😀
good move. i put the stone n show on mine, too. i just beat up my plate a little, but that's my fault bc i hadn't gotten used to it. i like being able to take it off, whenever i want.
I have a challenge and live in Alberta and thankfully I don’t have a front license plate but I will have to consider your idea when I move to Ontario. Thank you
This makes is so easy for people to steal the license plate. Somebody stole mine a couple years ago. Now, the only way to steal my license plate would be to rip apart the front bumper or steal the car.
Just discovered these mounts recently when someone with another car demonstrated it out here in California. A little pricey, but it's terrific functionality and the bracket hides away really well. Great install video. Also, discovered that these are not universal fit LOL. Looks like they cover most makes and models though.
I know this video is a year old, but I just viewed it. Last week I purchased a Challenger ScatPac and am dealing with front license plate issues. My question is; Can this mounting system be installed so the plate hangs downward and doesn’t sit in front of the bumper? My bumper has a dodge decal that’s centered and I don’t want to block the look..... Thank you for reviewing this product and showing the installation.
Yes, BUT you will need to score the oppossite rod. When inserted there are grooves on the right rod that catch in the spring pin to lock the plate in place. If you flip the sto-n-sho upside down you will need to create the grooves in the other rod. Also note this model is for the hellcat front bumper. There may be different mounting options for the scat.
NICE.. I live in TEXASS and just bought a car and I noticed today it has no front plate area. LOL so anywho. I just found your site and another person's to figure out how I'm going to fix the situation.
Glad to see someone representing for the Eastside! Most of these car videos seem to be dudes in sunny Cali or down south. Can you do a video on how the car handles in North East driving conditions? For example how does that front spoiler hold up during and after a snow storm?
was wondering if you can flip this around so it's more downward. Also mounting more off center as well. I think that would look better than in the very center. So off center pointed down.
No way! Nielsen Dodge is my local dealer too! I saw this Hellcat back in January. It was a pretty good deal. I plan on ordering a widebody Scat Pack from them soon.
Looks great wish stow n show would come up with better mount for my Scatpack scrapes alot 9 more days to Springfest cant wait at you flying out here or bringing the Kitty
Flying out on Wednesday, see you there! Mine scraped every day for about 4 years. Not many placed to install a No Drill mount other than under the lip on the scats ;/
Sadly mine had holes out of the dealers. I got a $15 ticket because it’s a “hazard” (had it in my window). But now I just have it ziptied on the lower grill and looks way better 👍🏽
Mean Green RT never thought about that! I’m coming from a state that doesn’t require front plates and have been dreading screwing holes on my front bumper
Thank you. Sam from Germany here. I got a (better 2) question(s): Are there noises while driving on this hitting the bumper f.e.? And how fast did you went on this one? (We are allowed to drive the max. of the hellcat on the Autobahn, that's why I ask.) Thank you so much, nice video! 😊🔥🤙🏻
Great review on the Sto N Sho. I have a 2020 Scat Wide on order (same front end as you) and was looking for a great solution to stay legal in CA but options for easy off. This is it! How are those simple black frames holding up to weather and wear? Was looking at something similar but in real carbon fiber. Additionally what bolts did you use?
Definitely a great product. I used the nylon bolts included with the Sto-n-sho and the frames are holding up well. (note: I don't drive the car in snow, ice)
I want to purchase this but dont know if it would fit my vehicle. I really dont want to drill directly into the bumper. What are the measurements between the bolt holes on the bracket that bolts to the bumper.
The shaft is notched on one side only, so out of the box it's not possible. Even if you notch the other side, it does look a little weird with the bars now being visible from the top down.
This guy flipped the plate 180 to hang below the bumper. He also rotated the plate mount so the release is on the correct side. instagram.com/p/BuvhTL3FMJl/ He has a few pics of it on his Instagram.
Yet another great informative video! I may see if they've got something for the Chargers. I could've sworn somebody makes something remotely. Am I crazy???
They do, they have a r/t charger one that mounts to the chin spoiler bolts. bigmikesperformanceparts.com/2015-2019-dodge-charger-se-sxt-r-t-gt-sns66/ this should fit right in front of your bad ass push bar.
@@WorkPlayDrive Ok cool! I am not a fan of having a front plate at all... BUT I'm the event that I'm driving my long road trips, I think it's a good way to not have to deal with the cops... Especially on that level. When you took it off, the bracket was barely visible...if at all! I'm gonna jump on board n get this. We will see how good that stow plate looks in between the push bar when I get it. Thanks again!
The one in this video fits all standard and widebody challengers with the Hellcat front clip (i.e. no driving lights) the one I show on my Scat Pack is for the other front clip style with lights.
That's super slick! I'm in Ontario Canada, I have a big ugly ass front plate mount drilled right into my bumper. Its definitely cringe worthy. Over the winter, I'm taking the car in to my local collision shop and having them pull the bumper, fill the holes and repaint it...I hate it that much. This plate setup is perfect. The only thing that I know will drive me nuts is that fact that the plate will shake and bounce around with every bump you hit. I'm wondering if there's any way to stiffen up the connection or even add more bumper material to have the plate rest on the bumper for more support.
I don't have any issues with rattle, even at low speed on bumpy roads. I don't feel you need any reinforcement. As you may have seen from other videos I cannot stand stray rattles or vibrations and have gone as far as removing my entire interior out to fix them ;)
I could but it’s not really relevant to everyone, because variables like age, credit score, location, marital status, education, etc. All drastically change the price from one person to the next
Work Play Drive True but it gives us a good idea of what we can expect. Only reason I asked is because I trust people like you. Not any of my business though...I’m subbed either way!
It was a pain in the butt, that method is more of a permanent solution. To remove you need to let the back end fall then remove the maintenance pan to pull it out.
Based on your video, I bought the Diablo's and Bumper Plugs from Scalia. I have a 2019 Challenger RT and the Sto and Sho site on Amazon stated it would not fit. Can you confirm that? That sounds strange to me.
If you have the 2019 R/T with the fog lights the cent bumper mount will not fit. It only works on the hellcat front clip because it have screws on the lower grill. The under the bumper one should work and if you are unsure you can always call Big Mikes performance parts to ask them.
I would say no, while it's not written into the law for NJ it is clear that the plate needs to be between 12" and 48" from the ground on the front of the vehicle. While you can assume the windshield is the front of the vehicle, friends have been ticketed for putting their plate in the windshield.
Scat Pack - it depends on what state your in. In Texas you can’t. Cops will say it’s a hazard or it obstructs the view 😑. I had to pay a $15 ticket because of that
I agree and in more recent videos I have moved to a trimmed down format and getting straight to the point. Sadly I was following the “things you must do to have a successful video”. When I should have been getting to the point”. 😏
We have a plate law in Washington but I love my front plates. My challenger came with front holders that I love because it holds the plate tilted downward which with my custom U of W purple plates and custom license of the name of one of my dogs who died it looks exceptional. The tilt downward of holder makes for a very aggressive look.
I'm in NJ too. I just ordered this plate mount after viewing your great installation video. I too do not want to drill the nose of my new Hemi Scat Pack Shaker Widebody Challenger or be constantly pulled over. Thank you!
Installed mine yesterday. What a breeze! Excellent product!
Agreed 💪
Just a heads up for those of us with Adaptive Cruise, this top mount version DOES WORK with adaptive cruise. This has been confirmed by Sto-N-Sho. The correct part number is sns1e.
Thank you! I have been trying to find confirmation on that.
Thank you! I was also looking for this.
I hate frontplates. But im in Ohio we trying to pass a law to get rid of them
Same for NJ, we have tons of petitions. The problem is the state cars have plate scanners that capture and ID plates as cars pass. It's a great system to find stolen cars, outstanding warrants, expired tags, etc. I don't see them giving up the ability to do this especially in a vary heavy traffic state like NJ.
Only a few more weeks, bud! We won't have 'em! I'm getting so excited for it. XD
That’s awesome news🙌
@@WorkPlayDrive I'm very much excited for it. Currently have my plate zip tied to the lower grille of my '12 SXT. 😁
My state does not require a front plate. Old Honda had one, new Honda does not. Thumbs up for the respect for law enforcement.
Always 👮 👍
Ordered mine yesterday from Amazon got it today. Works great looks great. You can mount the plate in the middle of the bumper or off to the side. Looks like the plate it floating. Pretty sweet. . I’ll tell you guys though. You’ll need that star shaped screwdriver head to get the screws off your car bumper. And a small socket wrench 🔧.
Ouch on both cars I was fortunate enough to buy out of state cars so my bumper was not drilled 🙏
That’s a great option for the ability to have a front plate and not having to drip holes in the beautiful front bumper! As alway GREAT install video brother!
Thanks man 🙏
That's the way to go if you have to have a front plate. I'm in the 20% 👍👍
I bought the same model for my HC and I love it. I don't need the front plate right now but every time I go back to Texas I put it on. I also used a smoked lens cover for the front plate as well.
Sadly that smoked cover is a nice ticket here in NJ.
Just put a Sto n Show on my Widebody Scat Pack because of New York laws. It was super easy to install.
what's up neighbor ;)
I had a Sto-n-Sho on my scat for 2 weeks. The metal plate that the rods slide into were soft soldered instead of welded. I hit a bump, the solder seperated from the bracket and the plate and rods fell off with me running over the plate assembly. I was fortunate to not cause damage to my tires or undercarriage. If they would switch to welding instead of solder, I'd consider re buying again, but not until then.
Sounds odd I’ve rammed the plate into the ground a few times without issue. Got pics to send to them?
You dont have to worry about putting officers lives in danger, if they dont want to risk it for the high pay, they can quit. Not to mention Bergen county cops are jerks in general. I know where that picture is in the cliffs, which is part of the reason why I left the county. Mercer county cops are MUCH better. Had my scat for 2 months and so far no one has bugged me yet. Im sure a couple days at the shore will change that.
This is fantastic. Just ordered mine. No more tickets in NJ! Lol
💪
It's a nice solution. Only part I don't like is that now my plates can be stolen simply by depressing the pin. So now I have to go through the trouble of filing a stolen plate report
Yep you need to get a solution that suits your needs. I don’t park in locations where the plate would likely be taken.
Thanks for the video! I only recently discovered that this device exists! Can't wait to order it for my next car :) I live in TX so 2 plates for us.
Contrary to a lot of car enthusiasts I actually support front plate laws. I've seen way too many videos of ppl w/o front plates hitting and running cars.
Plus, when you're driving the car, you don't see the front 😀
L
good move. i put the stone n show on mine, too. i just beat up my plate a little, but that's my fault bc i hadn't gotten used to it. i like being able to take it off, whenever i want.
I like mine. Super convenient when taking plate off. The bottoming out sucks though
I have a challenge and live in Alberta and thankfully I don’t have a front license plate but I will have to consider your idea when I move to Ontario. Thank you
It's an easy fix I live in New York state and they require it too so all you do is use 3M double-sided tape
This makes is so easy for people to steal the license plate. Somebody stole mine a couple years ago. Now, the only way to steal my license plate would be to rip apart the front bumper or steal the car.
Just discovered these mounts recently when someone with another car demonstrated it out here in California. A little pricey, but it's terrific functionality and the bracket hides away really well. Great install video. Also, discovered that these are not universal fit LOL. Looks like they cover most makes and models though.
That’s a great mounting bracket. That’s for showing everyone 👍 Going to order mine first thing tomorrow
Awesome 👍
Is it fine for 2022 Challenger redeye Jailbreak?
I know this video is a year old, but I just viewed it. Last week I purchased a Challenger ScatPac and am dealing with front license plate issues. My question is; Can this mounting system be installed so the plate hangs downward and doesn’t sit in front of the bumper? My bumper has a dodge decal that’s centered and I don’t want to block the look..... Thank you for reviewing this product and showing the installation.
Yes, BUT you will need to score the oppossite rod. When inserted there are grooves on the right rod that catch in the spring pin to lock the plate in place. If you flip the sto-n-sho upside down you will need to create the grooves in the other rod. Also note this model is for the hellcat front bumper. There may be different mounting options for the scat.
Great video thanks! I think it’ll look cool off to the side and atleast you can switch it up!
NICE.. I live in TEXASS and just bought a car and I noticed today it has no front plate area. LOL so anywho. I just found your site and another person's to figure out how I'm going to fix the situation.
In the front plate states it sucks, but the Sto-n-sho has been a great solution for me for 5 years now.
Glad to see someone representing for the Eastside!
Most of these car videos seem to be dudes in sunny Cali or down south.
Can you do a video on how the car handles in North East driving conditions? For example how does that front spoiler hold up during and after a snow storm?
Sorry I drive her all year but I won’t drive it in the snow or ice it’s not worth the risk.
was wondering if you can flip this around so it's more downward. Also mounting more off center as well. I think that would look better than in the very center. So off center pointed down.
From the looks of it and the hole spacing it appears that this can be done.
No way! Nielsen Dodge is my local dealer too! I saw this Hellcat back in January. It was a pretty good deal.
I plan on ordering a widebody Scat Pack from them soon.
Congrats in advance, Nielsen is not too close to me, but I'll be making them my dealer of choice after this experience.
Looks great wish stow n show would come up with better mount for my Scatpack scrapes alot 9 more days to Springfest cant wait at you flying out here or bringing the Kitty
Flying out on Wednesday, see you there! Mine scraped every day for about 4 years. Not many placed to install a No Drill mount other than under the lip on the scats ;/
You are rt scrapes everywhere good weather this year to for Saturday mid 70s see ya there👍
Great video great installation question, Where did you buy the kit that came with all that extra stuff
Great video ! I love mine and I have drug the crap out of it and it still holding up .
Those lower mounts take a beating
@@ll5352 you don't know he might have put some Sunoco blue in there. That stuff is like anabolic steroids for engines
definitely a better look if it allows you to flip down!
Sadly mine had holes out of the dealers. I got a $15 ticket because it’s a “hazard” (had it in my window). But now I just have it ziptied on the lower grill and looks way better 👍🏽
Mean Green RT never thought about that! I’m coming from a state that doesn’t require front plates and have been dreading screwing holes on my front bumper
thanks.. Great option, easy install.. Appreciate the video.
Thank you
I looked up this holder it won't fit The 2020 1320 challenger had to go with Mount under The splitter
Correct, the mount in this video is for the hellcat front bumper only (2015+ No foglights) The one I show at 1:33 is what you need for the 1320.
@@WorkPlayDrive got that one it's on The car so far so good
that jersey plate is pretty good lookin..like the colors better than ct where i live.
I envy Texas and CA with their sweet black plates.
@@WorkPlayDrive Delaware also has a black plate, but it looks like it's from the early 1900's
That’s funny I drove through Delaware this weekend and when I saw the first plate I thought the dude had some turn of the century plates on 😂😂😂
@@WorkPlayDrive They're fugly, but different.Look like they should be on the back of a horse and buggy instead of a car....lol.
😂😂
When i move back to NY I am keep my Florida Plates. You need in one plate in the back of your car lol
wow im really amazed and pissed i didnt think of this idea first....
Thank you. Sam from Germany here. I got a (better 2) question(s): Are there noises while driving on this hitting the bumper f.e.? And how fast did you went on this one? (We are allowed to drive the max. of the hellcat on the Autobahn, that's why I ask.) Thank you so much, nice video! 😊🔥🤙🏻
No noise noticed with this part on, and no issues with any speed I’ve done. And of course I’ve only gone the speed limit. 😏
Thank you
This is a great solution! I need to do this for my Charger.
very true, no tickets, no holes ;)
Very nice vid. What prevents this from being stolen is there something in place for this? I am interested in getting one
Sorry it has No mechanism for preventing theft.
Great video!
Thank you
Where is the link
Great review on the Sto N Sho. I have a 2020 Scat Wide on order (same front end as you) and was looking for a great solution to stay legal in CA but options for easy off. This is it! How are those simple black frames holding up to weather and wear? Was looking at something similar but in real carbon fiber. Additionally what bolts did you use?
Definitely a great product. I used the nylon bolts included with the Sto-n-sho and the frames are holding up well. (note: I don't drive the car in snow, ice)
Only color I would take over my white HC!
In europe we use 3M car tape and directly stick the plate to the bumper
It works for the long term, but I remove the plate often, up to a few times a week during peak show season.
Hey Bruh, did you ever do a ' 5 must have mods for the Scat?' Would love to know your picks...
Sounds Like a good idea, I'll see if I can squeeze it in before she's gone.
Great video. Is getting one of these!
;)
I want to purchase this but dont know if it would fit my vehicle. I really dont want to drill directly into the bumper. What are the measurements between the bolt holes on the bracket that bolts to the bumper.
Cool Stuff! Is it carwash safe?
Yes car wash will do much more damage to your paint than it will to the sto-N-sho
Where may I get one of those front plate installation kits from??
amzn.to/2FaBUOW
Did you try rotating it 180, so the plate would hang down? Just curious how it would look lower?? Thanks for the videos, always a great job!!
I'm curious about this question also
Now I'm curious as well... We will see tomorrow ;)
L, Na It looks as if the shaft is just notched, would it be possible to notch the other shaft with a dremmel?
The shaft is notched on one side only, so out of the box it's not possible. Even if you notch the other side, it does look a little weird with the bars now being visible from the top down.
This guy flipped the plate 180 to hang below the bumper. He also rotated the plate mount so the release is on the correct side. instagram.com/p/BuvhTL3FMJl/ He has a few pics of it on his Instagram.
9:22 It rattles around too much and those new flat plates (non stamped ) are the worst. Three different fonts.
Whats the difference between the ones that are meant for active cruise control and the others? They look exactly the same
The active cruise ones mount off the the side as to not block the all seeing eye.
Yet another great informative video! I may see if they've got something for the Chargers. I could've sworn somebody makes something remotely. Am I crazy???
They do, they have a r/t charger one that mounts to the chin spoiler bolts. bigmikesperformanceparts.com/2015-2019-dodge-charger-se-sxt-r-t-gt-sns66/ this should fit right in front of your bad ass push bar.
@@WorkPlayDrive Ok cool! I am not a fan of having a front plate at all... BUT I'm the event that I'm driving my long road trips, I think it's a good way to not have to deal with the cops... Especially on that level. When you took it off, the bracket was barely visible...if at all! I'm gonna jump on board n get this. We will see how good that stow plate looks in between the push bar when I get it. Thanks again!
Totally not visible so you are all good 👌
I’m awaiting delivery on my 2021 Scat Pack 1320. Will this version fit my new ride??
The one in this video fits all standard and widebody challengers with the Hellcat front clip (i.e. no driving lights) the one I show on my Scat Pack is for the other front clip style with lights.
Thank you young man. In this day and time most people don’t have any respect for the police.
Young lol 😂 I’ve past that a few years ago.
That's super slick!
I'm in Ontario Canada, I have a big ugly ass front plate mount drilled right into my bumper. Its definitely cringe worthy.
Over the winter, I'm taking the car in to my local collision shop and having them pull the bumper, fill the holes and repaint it...I hate it that much.
This plate setup is perfect. The only thing that I know will drive me nuts is that fact that the plate will shake and bounce around with every bump you hit. I'm wondering if there's any way to stiffen up the connection or even add more bumper material to have the plate rest on the bumper for more support.
I don't have any issues with rattle, even at low speed on bumpy roads. I don't feel you need any reinforcement.
As you may have seen from other videos I cannot stand stray rattles or vibrations and have gone as far as removing my entire interior out to fix them ;)
@@WorkPlayDrive Okay great. Good to know. Thanks.
Are you going to do a full video on the numbers of the Hellcat? (How much you’re leasing it for, insurance etc)
I could but it’s not really relevant to everyone, because variables like age, credit score, location, marital status, education, etc. All drastically change the price from one person to the next
Work Play Drive True but it gives us a good idea of what we can expect. Only reason I asked is because I trust people like you. Not any of my business though...I’m subbed either way!
Thank you 🙏
yeah I just got pulled over for not having a front plate (I'm in Texas)..Thanks for showing this!
Glad to help, I can't go more than a day or 2 without a plate before I get pulled over, this was a perfect solution.
Does Sto-n-Sho also ship it to Europe? I would love to have this for my Audi A5
Sorry not sure head over to their website an see if you can check out. They also have a ton of other vendors like amazon that carry their product.
@@WorkPlayDrive Okay, I'll check it. Thanks🙂
Beautiful man
Thank you
Can you flip the plate upside down so it hangs down?
Yes however you would just need to file a notch in the other leg so it locks in place.
I guess the license plate on the passenger visor inside the car isn’t legal?
Nope not here
What if you don’t want to take it off can you lock it?
The orange color that is above the nozzle of air how it worked
Are you referring to the rings? Check out this video ruclips.net/video/m3XyyTPVH-M/видео.html
Illinois is proposing a bill that will no longer require a front plate
Nice another awesome state 🥰 no bills on the dock for us NJ peeps 🫥
How were you able to remove the toggle bolts when you used that method?
It was a pain in the butt, that method is more of a permanent solution. To remove you need to let the back end fall then remove the maintenance pan to pull it out.
@@WorkPlayDrive Yikes! I really hope those toggle bolts I dropped fell off already and I don't have to get new tires soon :D
Surprised you haven't found a burnt orange anodized plate frame yet.
;)
I have one, love it.
Based on your video, I bought the Diablo's and Bumper Plugs from Scalia. I have a 2019 Challenger RT and the Sto and Sho site on Amazon stated it would not fit. Can you confirm that? That sounds strange to me.
If you have the 2019 R/T with the fog lights the cent bumper mount will not fit. It only works on the hellcat front clip because it have screws on the lower grill. The under the bumper one should work and if you are unsure you can always call Big Mikes performance parts to ask them.
@@WorkPlayDrive Thanks very much. You have become my "Go to" guy for info!
Thank you 🙏
Great share. Thanks!
Thank you 🙏
Hey guys I need your help... unfortunately I have the holes but is there any cheap way to fix it? Please let
Me know
I haven’t use them personally but a lot of people say a product called “bumper plugs” works great
Body shop and paint you won't notice you had holes at all
Does it make noise while driving ??
Nope, no sound and it does not touch the front bumper even at Mexico sanctioned speeds 👍
Is it legal to place the plate on the inside of the front windshield on lower passenger side?
I would say no, while it's not written into the law for NJ it is clear that the plate needs to be between 12" and 48" from the ground on the front of the vehicle. While you can assume the windshield is the front of the vehicle, friends have been ticketed for putting their plate in the windshield.
@@WorkPlayDrive Wow I did not know you could get a ticket for that. Thanks for the heads up.
Scat Pack - it depends on what state your in. In Texas you can’t. Cops will say it’s a hazard or it obstructs the view 😑. I had to pay a $15 ticket because of that
Scat Pack.Totally illegal.I was told in case of an accident that plate can go flying and slice you or a passenger.
Nice. Good job
Thank you!
You think itll fit on 2019 challenger gt?
The 2019 challenger GT needs the one that mounts under the front spoiler.
Does it work for the charger as well?
They have a similar one for the Charger as well..
Will this work on a 2015 challenger sxt?
The product I showed on my scat pack will work it mounts under the chin spoiler.
Can you hear it rattling when driving
It makes no noise at all
U got a hellcat? Nice man! Wat mods u gonna wrk on this new cat?
For this season I have a lot of visual stuff planned. Performance will be next year once I’ve had time to enjoy her.
@@WorkPlayDrive wow, that's dope man. Have fun n post those vids!
It is a fucking beast at 10:12
:)
Will this work on a 2015 Challenger SXT ? I would want the upper mount
No unfortunately the SXT grills do not have screws like the Hellcat grills. The SXT would require the lower mount.
I figured since I didn’t see it on the website. Thank you for the info though! Awesome car 🤟🏻
Video starts at 5:15 🤦🏽♂️
That's what she said!
will it fit a 2008 srt8?
Thanks for the vid
Mmmm? Sto-n-Sho doesn’t have one for 2021 Acura TLX TyPe-S.😡
Front plates are kinda silly. New Jersey is plenty silly...I know....I live here. :(
Yeah man and some towns are worse than others.
Bruh there's no way this needs to be an 11 minute video
I agree and in more recent videos I have moved to a trimmed down format and getting straight to the point.
Sadly I was following the “things you must do to have a successful video”. When I should have been getting to the point”. 😏
Couldn't someone take your license plates quickly by pushing that pin?
Sure, if they know it's there then it's entirely possible.
@@WorkPlayDrive oh okay thank you for the reply and your time keep up the good work man
Seen too late, i have 2 ugly holes in my bumper -.-
Sorry ;(
@@WorkPlayDrive, not for that, was my fault
Would zip ties also work?
sure they will hold the plate in place, but not something I'd be willing to show the car with...
You never hear about teslas getting pulled over for this.
Whats it called
I just got pulled over for the same thing and I’m not drilling holes in my car! fuck front license plates!
Nice 👍
great product for those that need it :-(
Agreed, Thank you.
Looks good! Still mad that you got that car though hahahahahaha
🤗
Awesome review, I follow your Instagram also 💯💯💯💯💯🔥🔥🔥🔥🔥
Thank you!