Yeah, some of whatever he used to make it seem more dirty wasn't even completely dry yet. Plus anything that accumulated that amount of gunk naturally would be an absolute mess on the inside, but when he opened it up, it was nearly pristine. I don't know why he decided to do that, if it was just a video on restoring a broken drill it would have been great still.
Heh, yeah. Rather peculiar that he didn't just keep the original blue color. I mean, after cleaning and then sanding it with 400+1000 grit sandpaper he didn't really need to paint it afaik. 🙂
Hi, not many people have this skill nor interest, you take pride in your work and the finish product is outstanding, excellent quality video ty so much, regards, Bob,
Почистил новую залитую дрель или нет, но так залитый инструмент даже новый не каждый сможет привести в порядок. Зачетное видео. По крайней мере видно что делал и как. Перемотка статора, чистка, отмывка, замена подшипников и провода. У многих даже усидчивости нет, не то что ума сложить все так как здесь показано. Лайк однозначно.
The copper looked good---Why cut it? Why cut the power cord? I have cleaned them off fine. Why not buff the outside, instead of painting it? A lot of unnecessary work, IMHO.
This channel was better when it restored actual old items... this one is staged as the inner parts are completely clean even the screws... mr tool do not loose your credibility dont follow fake channels you are an incredible person
Lots of criticism in these comments suggesting he fouled the drill just to make a video. I don’t care if he did or didn’t. I have a similar drill, (not Makita) that if I ever want to refurbish it I now have a reference to help me. I’m not an expert, just a Joe Sixpack who likes tools. Thanks Mr. Tool!
Your not only good at what you do but patient as well. One look at all the glup stuck on that drill I would have tossed it. That took some time to get it all off.
Oh look, 2 empty Seven Up bottles, best have a look under them (as you do) "wow,a gunged up drill,ideal item for a restoration video. My luck continues, even though externally drill is covered in what looks like resin. Even all over cooling vents, it must have dried instantly. As inside of drill is near spotless" Moral of story, Never ignore seemingly abandoned Seven Up bottles, who knows what treasures lurk beneath. I myself spotted a mound of Seven Up bottles, seemingly been there for years. But knowing what I do through the unfortunately named Mr Tool. I cleared bottles, underneath was a 1985 Delorean. What a find!. Okay, only slightly less plausible than the drill video.
I use to enjoy this videos now I believe before restoring they owner actually make the product look ten times diertier than then restore it, and here I am watching.
Мне одному кажется что он дрель специально испортил перед роликом ? Любой может взять заведомо рабочий инструмент залить его эпоксидкой ну или обосрать а потом отмыть и покрасить и тип збс реставрация. Чёт херня какая то
Ага, чтоб макиту кто-то в говно случайно выбросил, а он такой красавчик нашёл. Весь ютуб такой. Один годные вещи марает, другой делает псевдо ремонт, покрасив старую рухлядь. При этом на износ механизмов закрывая глаза. Третий восстанавливает с оригинальными запчастями, вероятно разбирая другую такую вещь, т. к хрен ты где такие найдёшь. Всё для просмотров.
Its surprising to see that the inner parts are still in very good condition... which seems impossible when looking at the outer condition of the drill.... :-O
Very interesting to see the motor rewinding. There are lots of Tool restorations on RUclips, but this is the first I've seen that includes motor rewind. Not a fan of the "transition" from makita to dewalt!
Great Job Mr Tool, Your Work is Very Nice, i like this video, You have changed the drill machine condition.
Tf lol
جديد
جاخىتخةكنامن
ماكو
نمةمنو
Makita is my favorite brand of small power tools. I can't believe you painted it the Dewalt color!
Oh kool, another drill restoration video.................
I got that same Makita, great drill, found it for 5 bucks on offer up, fixed it up and it is powerful.
This seems fake.... wasnt that just resin on that Drill? Easily cleaned with some nice soap and water... you do great work, but this seems fabricated.
Yeah, some of whatever he used to make it seem more dirty wasn't even completely dry yet. Plus anything that accumulated that amount of gunk naturally would be an absolute mess on the inside, but when he opened it up, it was nearly pristine. I don't know why he decided to do that, if it was just a video on restoring a broken drill it would have been great still.
@@waynedas873 so true.
like all asians restorations...
seemed that way to me too
@@radiotoho Just a bit racist, and a huge generalisation of Asians. Do you know them all??
Gran trabajo!!!
Creo que yo no me hubiese atrevido a meter las manos ahí, se veia realmente asqueroso.
Te quedó bastante bien. Felicidades👍👍
Good job bhai...
Sare angrezo ko preshan kr dia aap ne...
Not many people willing to take the time to clean their tools properly...look after your tool - it will look after you.
Great restoration.
Really enjoyed this! Even like how you transformed the drill from Makita to Dewalt!! Great Job
or Stanley XD
I think it shoulda been left makita because it's still a great brand I've got old Nikita stuff that's outrun my brand new dewalt stuff just saying
Makita not Nikita
Heh, yeah. Rather peculiar that he didn't just keep the original blue color. I mean, after cleaning and then sanding it with 400+1000 grit sandpaper he didn't really need to paint it afaik. 🙂
@@brandoncaldwell4872 Nakita 🤣🤣
Very nice ideal work👍
Hi, not many people have this skill nor interest, you take pride in your work and the finish product is outstanding, excellent quality video ty so much, regards, Bob,
Great job 👍
Bravo ! Respect for your patience...
Makita debranded into dewalt lol. Nice restoration work. 😊
Honestly...it looks like the drill has been covered in dirt by purpose.....looks in good condition
Yeah, I think that too
Почистил новую залитую дрель или нет, но так залитый инструмент даже новый не каждый сможет привести в порядок. Зачетное видео. По крайней мере видно что делал и как. Перемотка статора, чистка, отмывка, замена подшипников и провода. У многих даже усидчивости нет, не то что ума сложить все так как здесь показано. Лайк однозначно.
And the Makita turned into De Walt 😁, can’t be better than that .
wow great staged tool fix..loved it...
Great job, I’d rather have this one than a brand new one off the production line!
Exelente restauración , pero me hubiese gustado con el color original del plástico y las gomas sin pintar
There's just something very relaxing about silent resteration videos👍👍☺
I shuddered when he cut the copper, mad respect that you rewound the whole thing. Never see that in other videos
The copper looked good---Why cut it? Why cut the power cord? I have cleaned them off fine. Why not buff the outside, instead of painting it? A lot of unnecessary work, IMHO.
Old MAKITA to new DeWalt
Congratulations. .
Verderamente buen trabajo, quedo hermoso felicitaciones amigo gracias por compartir, sigue adelante
Did a good job taking that new drill and making it look old 😂
Руки у человека с правильного места растут. Мужик молоток !
Outstandingly excellent
Wow 🤩 a new Drill machine Fantastic
this tool was intentionally dirty, this drill was never used before, the interior didn't have any wood, steel or material...
Maybe someone just bought it use it only a few times and accidentally spilled this resin onto it and preferred throw it instead of trying to clean it
@@Francefire Most likely some one shitted it up to make a video
My first thought too when he opened it up
Its totally new
It is defenetly use if u closly examin it you will see that where the brushes rube its defenetly black
За перемотку трансформатора лайк 👍
Never thought in my wildest dreams that a drill in that kind of condition could be fixed. You are the best!!👍
This channel was better when it restored actual old items... this one is staged as the inner parts are completely clean even the screws... mr tool do not loose your credibility dont follow fake channels you are an incredible person
You are a magician
From india
Good job, I have never seen any Indian doing such nice work. Thumbs-up
Labor increible ha quedado mejor que nuevo
Lots of criticism in these comments suggesting he fouled the drill just to make a video. I don’t care if he did or didn’t. I have a similar drill, (not Makita) that if I ever want to refurbish it I now have a reference to help me. I’m not an expert, just a Joe Sixpack who likes tools. Thanks Mr. Tool!
Your not only good at what you do but patient as well. One look at all the glup stuck on that drill I would have tossed it. That took some time to get it all off.
Stop faking man. Find some real vintage broken stuff and fix them instead of faking videos. Maybe then i'll consider subscribing
I could have taken it apart But got it babk togeather again.. Thank you for all you skills. I lik to see more like this.. granny90
Amazing job buddy!!!
Oh look, 2 empty Seven Up bottles, best have a look under them (as you do) "wow,a gunged up drill,ideal item for a restoration video. My luck continues, even though externally drill is covered in what looks like resin. Even all over cooling vents, it must have dried instantly. As inside of drill is near spotless"
Moral of story, Never ignore seemingly abandoned Seven Up bottles, who knows what treasures lurk beneath. I myself spotted a mound of Seven Up bottles, seemingly been there for years. But knowing what I do through the unfortunately named Mr Tool. I cleared bottles, underneath was a 1985 Delorean. What a find!. Okay, only slightly less plausible than the drill video.
Yeah. I noticed that too. Inside of the drill is spotless, unlike the drill I found, which had all sorts of dust, rust and spider webs.
Amazing restoration Done 👍
Thumbs up 👍
👏 👏
Very good works
Well done sir! Your video is exactly what I need to repair my Makita... Thank you.
Excellent work
I use to enjoy this videos now I believe before restoring they owner actually make the product look ten times diertier than then restore it, and here I am watching.
No kidding. 100% bullshit!
Very nice work. You even made new coils. Excellent!
“How to turn a Makita into a DeWalt”
And, for future reference...
NEVER turn a Makita into a DeWalt.
I was going to ask the same thing
Haha. My thoughts exactly after he painted it yellow.
Hahahah man believe me, I was going to comment the same thing, then I saw your comment
Ni siquiera judas se animaría a tanto
what a new one! I even spilled glue on it.
Great work Mr. Tool. I like your work.
Please mention in your video item use for cleaning purpose etc.
Wonderful reassemble
Great
Мне одному кажется что он дрель специально испортил перед роликом ? Любой может взять заведомо рабочий инструмент залить его эпоксидкой ну или обосрать а потом отмыть и покрасить и тип збс реставрация. Чёт херня какая то
Надо видео про что-то снимать, вот и изголяются ребяты юго-восточные по полной.
Да по любому она в нутри как новенькая
Перемотка статора, замена подшипников и щёток не считается?
точно облил какой-то парашей новую дрель и делает вид что восстанавливает. уже не первое видео такое.
Ага, чтоб макиту кто-то в говно случайно выбросил, а он такой красавчик нашёл. Весь ютуб такой. Один годные вещи марает, другой делает псевдо ремонт, покрасив старую рухлядь. При этом на износ механизмов закрывая глаза. Третий восстанавливает с оригинальными запчастями, вероятно разбирая другую такую вещь, т. к хрен ты где такие найдёшь. Всё для просмотров.
Good job 👍👌,
Great job.. welden
It's excellent work, perfect restoration
Gran restauración de un humilde taladro,una máquina que tanto nos ayuda
See this is why you don't let Big Foot borrow your Tools ,one sneeze and your tool is ruined, great job on fixing it up
Nice quality drill - well worth the repair
Well Done.
Great job ! But yellow !
Its surprising to see that the inner parts are still in very good condition... which seems impossible when looking at the outer condition of the drill.... :-O
This is the Primitive Teknology vs Primitive Technology channel of the restoration community
Good Job .
wery nıce here is the big art thanksi
Great job 😍😍😍😍
GREAT JOB!!!!! nice Drill Machine restoration!!!!.
Hi Mr.Tool👋👋👋 very good restoration drill 👍👍👍🔥👌🏽
At least you give hope to people who wants to repair tools.
Very interesting to see the motor rewinding. There are lots of Tool restorations on RUclips, but this is the first I've seen that includes motor rewind. Not a fan of the "transition" from makita to dewalt!
Excelente maestro, quedo nueva.
Saludos desde Iquique Chile.
Wonderful !!!
Congratulations on your work! You also did a new motor winding
والله تستحقه.... ومبروك عليك...
Good job !
Nice work
wow! unbelivable!
the insides are real clean man
Really nice job, kind of weird the DeWalt color choice but is not less impressive because of that
Makita to dewalt 😅
Nice job
An excellent restoration. Nice paint color too... WELL DONE!!! 10/10
اكتر من ررررررررائع
Enjoyed watching you rewire the motor. Thanks for another great restoration.
Sky King same here I don’t think I have seen anyone onRUclips do this yet
💯
Even new coils. Nice work.
Incredible transformation! I couldn’t believe when you re-wound the stator!
Yes it was impressive that he was able to fix what he broke.
Camera parson so good
Ay pobre qué pena da verlo! Y que gran trabajo has hecho Mr.Tool, fantástico, me parece poco un like solo quiero darte muchos likes!!
Someone had a fun time with the drill 😂😂
Haha real funny guy aren't you
4:15 I was thinking next he gonna throw some salt and pepper into it XD
Real Chinese Makita!!! Great!
After the core "rewinding" the "done" shot looks like the original before. A lot of reverse aging here.
Very very very good
Тоже ищешь русский коммент?! ❤️
ага)
Роман Адамчук да
Я ищу ответ- нахрена он из Makita сделал мой любимый DeWalt🤣🤗
Нет не руський!Украинский или европейский толковый
@@СлавкоПолевой да
I was iffy on the yellow, but it looks really good. Great job.
It now a De-kita looking at the colur choice good job tho I clean all my second hand power tools like this
That is amazing how you restored the drill to working order. It looks much better than before and it works like a charm as well. Excellent work.
Your job is great we liked your job very much
Chistes para niños
INCREDIBLE!!!😮😮😮
Hey....you found my drill. Awesome and you cleaned it for me :)
Impressive work!👍👍
Иду заливать свою дрель цементом потом реставрирую , никак провод не поменяю , а так хоть повод будет .
Точняк) рабочую дрель разобрал