I’m not a mechanic. I followed this video to the letter. Total success. I will say that the rotor did not come off nearly as easily as this. I had to tap it off as there was some rust and tap the new hub in place as the specs for the size were not exact. All is well. The ABS lights went off as soon as I hit the accelerator leaving the driveway. Great video.
Great video, i’m sitting here at the dealership and they said it was $900 parts included, I wanted to have an idea of exactly what it took to do this work, I only wish I had the time to complete it myself. Exxon presentation to what it would take to complete thank you!!!
So if I replace the hub inside the hub is another speed sensor that will make my dash lights turn off because I have the (abs,cliff control,and the car with the skid mark like image) on will all turn off I already scanned my kia and said read left speed sensor faulty will this fix my issue will this fix this issue ??
My dashboard lights are again. I’ve changed the left rear couple of months ago. I’m in doubt, is the rights side now or there are front wheels sensors too ? Can anybody tell me for sure ? I looked under the car and didn’t see any front ones, but also i’m not mechanic nor do i pretend i know what i’m doing
LOL 2:10 The sensor cable was never plugged back into the new hub. To my understanding the sensor is supposed to be programmed to the car is it not what the?
That’s correct, if it’s a all wheel drive then you’ll probably have to change the wheel bearing itself which will have to be pressed out and the new one pressed in
@@eze1987ful they ;pop right off with a flathead screwdriver. When installing the new pone, use a hammer and a block of wood to seat it properly. I know this is late, but it may help someone. Cheers.
That sure looked super easy!! Your music selection is perfect. Nice work
Thank you! Took me only 15min to do the whole job
I’m not a mechanic. I followed this video to the letter. Total success. I will say that the rotor did not come off nearly as easily as this. I had to tap it off as there was some rust and tap the new hub in place as the specs for the size were not exact. All is well. The ABS lights went off as soon as I hit the accelerator leaving the driveway. Great video.
Awesome!! This wheel hub is probably the easiest wheel hub I’ve ever replaced. Im happy this video helped you 👍
Great video, i’m sitting here at the dealership and they said it was $900 parts included, I wanted to have an idea of exactly what it took to do this work, I only wish I had the time to complete it myself. Exxon presentation to what it would take to complete thank you!!!
Great freaking video dude!
Thank you 👍
Questions would the speed sensor cause the car not to run good , I have 2 codes that it's giving me , with the rear speed sensor.
good day to you. Is it possible to change the abs sensors without changing the whole hub assembly?
It’s possible but it’s so much easier and faster to just change the whole thing
So if I replace the hub inside the hub is another speed sensor that will make my dash lights turn off because I have the (abs,cliff control,and the car with the skid mark like image) on will all turn off I already scanned my kia and said read left speed sensor faulty will this fix my issue will this fix this issue ??
Yes just replace the hub and all the lights will reset when you start driving again
Will do thank's a billion have a great one 👍🏻👍🏻🙌🏻🙌🏻🙏🏻🙏🏻
My dashboard lights are again. I’ve changed the left rear couple of months ago. I’m in doubt, is the rights side now or there are front wheels sensors too ? Can anybody tell me for sure ?
I looked under the car and didn’t see any front ones, but also i’m not mechanic nor do i pretend i know what i’m doing
Hey, you’ll need someone to do a diagnostic on all the speed sensors, that should pin point which sensor is bad
@@eze1987ful where are the front ones ? They’re not integrated in the hub just like the rear ones
What are the torque specs on the 4 bolts holding the hub in place ?
About 87 ft-lbs
Correct me if I'm wrong but is that drum brakes and pads? To me it looks like two different brakes system at the back.
It has drum brakes and pads. The brake pads sits right on top of the rotors and the drums brakes sits inside the rotors
The main brakes are disc brakes. However, it also has a small set of drum brakes inside the disc hub on the rear for the parking brake.
LOL 2:10 The sensor cable was never plugged back into the new hub. To my understanding the sensor is supposed to be programmed to the car is it not what the?
Good catch lol I plugged it after the video. No need to program, just plug and play
Okay this is the Front Wheel drive only vehicle. Mine won’t work this way..😢
That’s correct, if it’s a all wheel drive then you’ll probably have to change the wheel bearing itself which will have to be pressed out and the new one pressed in
You didn’t include the most important part………. How to do the actual replacement of the sensor. That sucks
It’s best to just replace the wheel hub with sensor
@@eze1987ful they ;pop right off with a flathead screwdriver. When installing the new pone, use a hammer and a block of wood to seat it properly. I know this is late, but it may help someone. Cheers.