Great build guys an presanding before final assembly is the best tip as when test fitting my master sword blade did the exact same luckily I hadn't painted any but I did have to reprint the 2 guard pieces a second time at mine completely snapped
I realize this is an older video, but a much better way to use ca glue activator is to spray the opposite side of a mating part with it befor you shove them together. It's not always feasible, but it is usually preferable to slathering your surface with activator when it can't get very far into the joint because the cavity is already full of ca glue😎
That's a beauty, love it. I prefer yours over Adam savages, loved the fact you didn't do the silly looking rainbow heat scorcrches he did. And yes please full mando armour
Haha thanks! This is actually the same model he built, and yes we did opt out of the scorching to keep it a little more approachable and easier on the eye.
Awesome video! Going to print and build one myself soon. Etsy site says 27mm OD and 6mm OD tubes needed. You used a 1" pvc pipe and no size mentioned on the wooden dowel. Did you have to scale the pieces? What were the sizes you used?
We did not have to scale anything the 1 inch pvc pipe was the closest we could get to the 27mm piece in our area and for the 6mm we just used a 1/4 inch wooden dowel and everything fit great!
Hello Guys!! I've just saw your amazing video!! thanks for all the compliments to my work!! Your video is incredible, so easy to follow, I was wonder if you don't mind if I may include a link to this video on my ETSY Store? Thanks again for your infinite patience while building the files! :)
hey i'm famous! xD and also your #1 fan! Great video as always. this build looked complicated but you two made it seem easy. Not gonna lie that sanding killed me a little on the inside. The wood effect was perfect. Great job! Still waiting on that Iron Man helmet! :D Mr. Stark is displeased..
Drop a comment of something you'd like to see! If you haven't yet make sure to *subscribe* ! Lots of fun stuff coming up.
Great build guys an presanding before final assembly is the best tip as when test fitting my master sword blade did the exact same luckily I hadn't painted any but I did have to reprint the 2 guard pieces a second time at mine completely snapped
It is an unfortunate lesson to learn, but good knowledge to have haha
j'ai hâte de le réaliser ce projet avec mon imprimante 3D ! j'ai déjà réalisé mon casque mando grâce a vous merci !
Bonne chance!
Proud of you guys! That's a beautiful build and the color texturing is amazing. Keep it up!
Thanks so much! Glad to have you along for the ride!
Beautiful job, I've go these pieces printed and about to embark on it! Question - do you have a list of what colour paint to do each part with please?
I realize this is an older video, but a much better way to use ca glue activator is to spray the opposite side of a mating part with it befor you shove them together. It's not always feasible, but it is usually preferable to slathering your surface with activator when it can't get very far into the joint because the cavity is already full of ca glue😎
Thanks for the tip!
Would be awesome to see some Hextech come to life!
We'll have to consult Jayce and Viktor for that one!
That's a beauty, love it. I prefer yours over Adam savages, loved the fact you didn't do the silly looking rainbow heat scorcrches he did. And yes please full mando armour
Haha thanks! This is actually the same model he built, and yes we did opt out of the scorching to keep it a little more approachable and easier on the eye.
This is amazing! Such great content that I'm really surprised isn't bigger yet.
Thanks! We've made a lot of progress this year but still plenty to go!
Please can you tell me what you spray after applying the CA glue? What is it's purpose? Help prevent runs, and spread the glue evenly?
We are using CA glue activator - all this does is speeds up the curing process of the super glue
Man this would fit my Mando Cosplay soooo well
Halloween 2022 goals?
Great build! What is the overall length after assembly?
Thanks! The final length came in just around 63 inches (just over 5 feet)
Great video I am looking forward to making this one and seeing what more you two get up to
Good luck, we would love to see it when you are done!
@@make432 happy Christmas and new year I will send you some pictures when I done it
Great build! What was the overall weight of the model?
Thanks! It is actually really light, ours came in just under 3 lbs
The amount of work you guys did...
This time I really think about just buying the nerf Version and repainting it haha. And it shoots so that's cool
That would be amazing - grab us on one too ;)
This looks beautiful, making it exactly the same way right now. How many coats of primer did you guys use?
Awesome! We used 2 coats of primer with sanding after each coat dried. Best of Luck!
What length of pipe did you get at the hardware store? To hold the scope parts in place?
yessss
!!!!!!!!
Awesome video! Going to print and build one myself soon. Etsy site says 27mm OD and 6mm OD tubes needed. You used a 1" pvc pipe and no size mentioned on the wooden dowel. Did you have to scale the pieces? What were the sizes you used?
We did not have to scale anything the 1 inch pvc pipe was the closest we could get to the 27mm piece in our area and for the 6mm we just used a 1/4 inch wooden dowel and everything fit great!
Hello Guys!! I've just saw your amazing video!! thanks for all the compliments to my work!! Your video is incredible, so easy to follow, I was wonder if you don't mind if I may include a link to this video on my ETSY Store? Thanks again for your infinite patience while building the files! :)
Hey there! Thank you for checking out the video and for making the files, and yes you absolutely can, we'd appreciate it!! :)
What is the length of the pvc pipe...or did i miss it?
hey i'm famous! xD and also your #1 fan! Great video as always. this build looked complicated but you two made it seem easy. Not gonna lie that sanding killed me a little on the inside. The wood effect was perfect. Great job!
Still waiting on that Iron Man helmet! :D Mr. Stark is displeased..
We are honored to have you as our #1 fan - the iron man (something) is hopefully coming this year!
Where is print??? No paint ...I need print...
Here is where we got the files from! www.etsy.com/listing/749083472/the-mandalorian-pulse-rifle-3d-files