I've just adjusted the tension and I feel a huge improvement. I don't know why I didn't do it earlier 😅 Thank you for the tutorial. I'll order some magnets next
I'm new to cubing and I want to get a little faster at solving. The cube I have has crappy corner cuts so I did some research. I ended up buying this cube because it seems to be a favorite among experienced cubers, and it's only $13. It's a win win.
Thank you so much man! I actually just bought this cube with magnets and lube, and as a beginner I had no idea how to set it up, so this is exactly what I’m looking for. Really nice video quality too. You earned yourself a sub!
This cube is actually amazing, i tried customising it based on your recommendations but had to make do with the lube, because id din’t have the same lube as you. It instantly replaced my gan 356m My rs3m’s setup is: - 2 - 3 drops dnm 37 - 2 drops of gan lube, or any other silicone lube - 1 and a half 360 degree turn on screw to loosen tensions - 3 clicks on spring tension - added n40 magnets in the edges (no glue needed) - 2 drops of gan lube around the screw to stop spring noise
Just got this cube yesterday and I'm absolutely loving it. It was really fast and I had no extra magnets so I just set the spring compression as high as possible and added a ton of silk and now its godly. I will hopefully get extra magnets soon though.
pro tip about washers!! the washers have a rough and smooth side from the manufacturing process. If the springs are making a lot of noise, they're against the rough side. Flip the washer over and presto! no more spring noise.
@@RofICopters what would happen if you used some of the gravitos (SP?) on the washer instead of the black whatchamacallit in the video? Wouldn't it just let the spring slide a little and thus not causing the spring sound?
They're ingredients are fundamentally different. Each has their own intended application. lubricating metal to metal surfaces isn't the same as plastic to plastic. It might get rid of the spring sound, but at a cost. The sound comes from the rough surface vibrating the spring enough to make sound. If you put in enough non-metallic lube to stop the sound, it could just gum up the workings. OR it'll just be a temporary fix as the lube goes away. turning over the washer without any lube at all will get rid of the spring sound.
Thanks I really needed an in depth guide on cube set up, how would the cube turn out if I only used the dignitas and gravitas? I only have silicone weight 5 currently and I don't really have a big enough budget to spend on lubes. I would love to see a set up tutorial on a gan lite as that's the cube I am maining. also, im really curios what is the second part of your shirt (intellectuals solve problems;)
5:02 can't believe that after millions of cubing videos I finally found a guide to tension a cube that does not require advanced mathematics or relying on my eyes to tell which of the two sides is freaking TIGHTER BUT THEY LOOK THE SAMEEEE TO MEEEE EVENTHOUGH ONE SCREW IS NEXT TO THE CORE AND THE OTHER JUST CAME OFFFFFFF@#$%^%^*()!!!!!!
I like slower cubes so what i did is to tighten the cube a little bit to where it corner cuts efforlessly but put the spring compression to the max so I have a nice stable cube that is the right speed for me but has amazing corner cutting. I just put 2 drops of M-Lube (bc that's all I have) and that's how I setup my cube.
joe lei I only got it late yesterday so it’s not quite broken in yet but I think it should be really great. I actually don’t mind the frosted plastic that much either.
I had RS3M 2020 for the longest time and I also bought the extra magnets. However, I was too lazy to install the magnets and don't want too strong of a magnet. This is the reason that I didn't like my RS3M 2020 over MeiLong 3M. Reason being that RS3M 2020 is a heavy cube. It requires those extra magnets. I finally installed the magnet after months. That makes the biggest difference. It's very stable now and I'm going to make it my main. Lesson learned: those extra magnets are required for this to be S-Tier cube. No, the extra magnets are not making it too strong.
I wouldn't use the extra magnets because I have set this up to be slower but because the magnets are weak it makes slices great. Which makes it really good for Roux OH
Probably would use DMN instead of compound x if I put angstrom lubes in an RS3 2020 (partly because I have it already, and partly because I like faster cubes). Generally I would still use calvin's high viscosity as my default for most of my cubes, but my Meilong 4M, Aoshi GTSM and MF8 M all use dignitas+gravitas+DMN, and they are definitely my 4, 6 and 8 mains.
This 2020 cyoubx is back and firing of GAN's Cubes Rubik's have signed and sponsoring some big main Cubers and planning to release speedcubes And Chinese Cube Manufacturers😱
Use weight 5 in core and drop 2 drops of lunar on the middle edge where you should turn 45° before that. Then take the upper layer, lift it up with your hand slightly above the edge piece and then scramble. If you can buy both weight 5 and a lunar (or better dnm 37) follow this. If not buy a weight 3 silicon based tube and and it to both the core and the center piece. My rs3m is set up with weight 3 on both core and pieces. It works perfect it's been months and I just lube 2 times.
plz answer to this.i already commented so i hope u see it this time. for the lube, could i maybe use lunar and weight 5 instead? if yes, how would i lube it with lunar and weight 5? Edit: also, the lunar is for the core, and the weight 5 is for the pieces. good tutorial tho. have a nice day
@@cyoubx ok! jperm recommends lunar for the core, so thats why im asking. im not very familiar with the angstrom lubes and max command, so yea. thx for replying! good tutorial! this was very useful considering that this is the cube im going to be buying soon, and this will help make this awesome cube even better! have a good day! Edit: i mean compound 10, not max command. im new to lubes, so im not sure how everything works. suggestion: maybe u could make a guide to lube, telling about all the popular ones. just a suggestion. mattress out
안녕하세요 한국인은 제가 처음같지만.. 헤헤 좋은 영상 감사합니다☺️ 그 혹시 윤활류?? 윤활제? 는 어디서 구매하셧는지 궁금합니다 아 또한 스프링 소리를 안나게 하시는게 잘이해가 가지않아서.. 시간이 되신다면 작은답변 기다리겠습니다 오늘도 좋은 하루 되시길 바라겠습니다 감사합니다🪖☺️
I havent seen any of your solves, but what mostly works is: - Keep working on your cross to f2l transision - work on cross+1 try to find your first pair while inspecting and when you start solving try looking at the second pair (Thats damn hard, but practice makes perfect!) - work on f2l lookahead - work on f2l efficiency You can train that while doing slow/untimed solves - work on your algorithms and perfect them to a point where you can just spam TPS on LL If your algs sucks, try switching to better ones (If you don't know full PLL, learn it) And the best tip ever: - record your solves! Do a avg5, and analyse the solves in slomo You will find your weaknesses and then you gotta work on them! That should bring you sub 12 fairly fast =)
Thx for all the tips but what is the other blue thing that comes in the accessories box? Not the screw driver or tension adjuster but the smaller one that kinda looks like the tension adjuster? How do you use it?
What is the default spring compression, i was messing around with it and I don't know what it is, can someone please tell me that would be much appreciated.
bro i dont recommended lubing the core to fix spring noise, a lot of people get a issue called "stripped core" what happens here is that the scre unscrews itself due to this sometimes in mid solve a whole layer of cube comes out when ur turning from my experience this happens due to lube in core slowly lossening the screw so just bear with the noise its a 9 dollar cube afterall what do u expect?
Cool setup! Quick question- Would weight 5 reduce spring noise, and is it an overall good cube lubricant? I know it is nowhere close to lucbicle black, but just wondering (:
What kind magnet did you put in to the cube? I don't wanna order at the cubicle just to order magnets thats only a dollar to be shipped all the way to the Phillipines. And I looked up in the cubicle and there is no specific magnet name (e.g. N45, N50, etc.). Thanks!
Even cyoubx does not know what extra magnets he added but my recommendation is n42 or even n45 . Some people even use n50 but I think that is too strong.
I was going to get the RS3M 2020, but have none of those lubes. Would it be worth it to get the Cubicle Custom edition setup as shown, or should I just get the RS3M and put what little lube I have in it?
would this setup make the cube slow and gummy or slow without the gummy feel? I personally like a slower more controllable feel without the gummy feeling.
Links and timestamps are in the description! What other cube should I do a setup tutorial for?
Gan x v2. Pls make a setup. I have Dnm silk and mystic
Can you do a setup tutorial for Valk cubes. I can never get them to be fast enough or their cornercutting good
Xs
Mgc elite
Valk elite
The sound that the spring tensioner makes is new cubing “asmr”
G perm lol nice name
G perm with diagonal corner swap in the pfp xD
Cyoubx is way too underrated, if not for his break in RUclips he would probably have like 50K already
Yeah, he left in the past two years which was the boom for cubing
Yeah underrated... Like u too so many RUclipsrs have just not blown up yet
Do you know where to get cube magnets? I have no idea where to get them but I have a cube coming
@@coltondenham9533 It'll be easily available in most cube stores.
I've just adjusted the tension and I feel a huge improvement. I don't know why I didn't do it earlier 😅 Thank you for the tutorial. I'll order some magnets next
3:17 holy carp that turning was like sonic on crack
Watch it 2x speed
My head exploded
I'm new to cubing and I want to get a little faster at solving. The cube I have has crappy corner cuts so I did some research. I ended up buying this cube because it seems to be a favorite among experienced cubers, and it's only $13. It's a win win.
Yep it is isn’t it?
Its 9 dollars for me plus 1 dollar for delivery fee
It's 20 for me :(
its 4$ for me
I got mine for 7$ and 1$ shipping fee. Its price to performance ratio is wild. The best cube in market rn
Thank you so much man! I actually just bought this cube with magnets and lube, and as a beginner I had no idea how to set it up, so this is exactly what I’m looking for. Really nice video quality too. You earned yourself a sub!
hey add time stamp 0:00 intro . it will be auto add in timeline
When you're so early that RUclips hasn't registered the 1 other person who's seen this video as a view
This cube is actually amazing, i tried customising it based on your recommendations but had to make do with the lube, because id din’t have the same lube as you. It instantly replaced my gan 356m
My rs3m’s setup is:
- 2 - 3 drops dnm 37
- 2 drops of gan lube, or any other silicone lube
- 1 and a half 360 degree turn on screw to loosen tensions
- 3 clicks on spring tension
- added n40 magnets in the edges (no glue needed)
- 2 drops of gan lube around the screw to stop spring noise
What's the size of your magnets?
What's the size of your magnets?
4x1.5?
4x 2
@@a.b5263 but 4x1.5 should be fine right?
•Serkoid• yeh not kuch of a difference
Just got this cube yesterday and I'm absolutely loving it. It was really fast and I had no extra magnets so I just set the spring compression as high as possible and added a ton of silk and now its godly. I will hopefully get extra magnets soon though.
Im waiting for this cube for my birthday so excited
Happy birthday!
@@cyoubx Omg thank you
So now I just need to figure out the SCS lube equivalents to try this setup haha. Thanks for the guide, def trying this today.
I actually liked for the logo to stay, it feels premium
Thank you so much for making this! I recently got the RS3 2020 and I've wanted to set it up!
the tip on looking at the corner and edge when tensioning is brilliant
THANK YOU SOOOO MUCH it made my rs3m SOOOO much better
I will sub now. This is the first video I saw of your channel and it is very appealing. I will watch everyone single video.
Thank you and welcome!
cyoubx thank you for the awesome content and should I buy the Ms 5x5 or ylm 5x5.
@@sarikasawhney2278 mgc 5x5
@@kashyapkarthik3578 I am the same person.The mgc is more expensive
@@naveensawhney4989 but is is sooo worth it if you can spare the extra couple of bucks, it will honestly blow you away
We want you back...
Please start uploading again !
Definitely the best video for this, cheers!
Great video! I just got mine, and I'm thinking of making the magnets stronger
Do it!!! Makes the cube way better.
@@cyoubx what strenght are your magnets? Should I use n50?
Damn. 6:45. You can tell by him turning it that this cube is a winner. Possibly budget cube of the year. Hell decade even.
This cube has a feeling that reminds me of a new batch guhong with that smooth feeling with a bit of bumpiness during the turn
Ok just found me maybe my favorite channel in cubing
Thank you so much for that tensioning guide!
Very detailed instructions, exactly what im looking for. Thx and keep it up!
Your one of my fav you tubers, man you are so underrated
Great idea, setting tension by testing corner cutting. Helped me fine tune one side that was a little off.
Very helpful video. Thanks!
The Moyu screwdriver got some Lubicle black lol. You are very smart.
I love your videos man, so glad your back.
Thank you for this video. I just received my first speed cube. The rs3m 2020. Thanks!!!!
I loved ur speaking style and just subbed😎
pro tip about washers!!
the washers have a rough and smooth side from the manufacturing process.
If the springs are making a lot of noise, they're against the rough side. Flip the washer over and presto! no more spring noise.
I dont know hot to thank a god like you
Great tip! Smooth side goes up.
😁
@@RofICopters what would happen if you used some of the gravitos (SP?) on the washer instead of the black whatchamacallit in the video? Wouldn't it just let the spring slide a little and thus not causing the spring sound?
They're ingredients are fundamentally different. Each has their own intended application. lubricating metal to metal surfaces isn't the same as plastic to plastic.
It might get rid of the spring sound, but at a cost. The sound comes from the rough surface vibrating the spring enough to make sound. If you put in enough non-metallic lube to stop the sound, it could just gum up the workings. OR it'll just be a temporary fix as the lube goes away.
turning over the washer without any lube at all will get rid of the spring sound.
Thanks I really needed an in depth guide on cube set up, how would the cube turn out if I only used the dignitas and gravitas? I only have silicone weight 5 currently and I don't really have a big enough budget to spend on lubes. I would love to see a set up tutorial on a gan lite as that's the cube I am maining.
also, im really curios what is the second part of your shirt (intellectuals solve problems;)
5:02 can't believe that after millions of cubing videos I finally found a guide to tension a cube that does not require advanced mathematics or relying on my eyes to tell which of the two sides is freaking TIGHTER BUT THEY LOOK THE SAMEEEE TO MEEEE EVENTHOUGH ONE SCREW IS NEXT TO THE CORE AND THE OTHER JUST CAME OFFFFFFF@#$%^%^*()!!!!!!
I like slower cubes so what i did is to tighten the cube a little bit to where it corner cuts efforlessly but put the spring compression to the max so I have a nice stable cube that is the right speed for me but has amazing corner cutting. I just put 2 drops of M-Lube (bc that's all I have) and that's how I setup my cube.
It's like he is a cube doctor . He is doing operations by putting the gloves .😄😄
Hey Cyoubx, if you see this, what’s the best lube setup for a buttery and semi fast turning experience on the Gan XS?
Dignitas/Gravitas. Add Silk and DNM-37.
I just got a Gan XS and was wondering the same exact thing 😂
GemGem32 I’m really liking this cube, getting really good times on it.
joe lei I only got it late yesterday so it’s not quite broken in yet but I think it should be really great. I actually don’t mind the frosted plastic that much either.
@@cyoubx basically "The Angstrom Setup"
Thank you so much!!! After your set-up cube is awesome!!!
Thanks from India
I had the same reaction to the sticker. I wouldn't have minded a 魔域文化 logo printed on the white center but that misaligned sticker had to go
Earned my sub.
Damn been waiting for this
I had RS3M 2020 for the longest time and I also bought the extra magnets. However, I was too lazy to install the magnets and don't want too strong of a magnet. This is the reason that I didn't like my RS3M 2020 over MeiLong 3M. Reason being that RS3M 2020 is a heavy cube. It requires those extra magnets. I finally installed the magnet after months. That makes the biggest difference. It's very stable now and I'm going to make it my main.
Lesson learned: those extra magnets are required for this to be S-Tier cube. No, the extra magnets are not making it too strong.
just found out your channel keep it up! I'll try and catch up to your videos :D
We got a new cube solve hero here
This helped me a lot.thanks bro.
I wouldn't use the extra magnets because I have set this up to be slower but because the magnets are weak it makes slices great. Which makes it really good for Roux OH
That is so funny that we basically lubed this cube the exact same! I don’t use compound X tho
Probably would use DMN instead of compound x if I put angstrom lubes in an RS3 2020 (partly because I have it already, and partly because I like faster cubes). Generally I would still use calvin's high viscosity as my default for most of my cubes, but my Meilong 4M, Aoshi GTSM and MF8 M all use dignitas+gravitas+DMN, and they are definitely my 4, 6 and 8 mains.
I've ordered extra magnets, medium strength. Can I just pop extra ones on even if they are stronger than the default ones?
Great video!
What magnet strength do you add in? N35, N38 or N42?
I want to know this, too
Honestly doesn't matter. Anything is better than nothing. I used strong ones. I'm going to guess they were N42's.
@@cyoubx
thank you very much!
@@cyoubx Thanks!! I'm going to use N40 magnets :D
@@Serkoid Did the n40 worked on your cube??
ty for this video cyoubx love yeahhh
How does spring compression affect the cube?
wtf dude the logo in this cube is fukin lit
Great video
Such a good video
This 2020
cyoubx is back and firing of GAN's Cubes
Rubik's have signed and sponsoring some big main Cubers and planning to release speedcubes
And Chinese Cube Manufacturers😱
I should probably find this vid before fucking up my cube
Very very good video... thank you
for the lube, could i maybe use lunar and weight 5 instead? if yes, how would i lube it with lunar and weight 5?
hello? r u there? can u answer plz
Use weight 5 in core and drop 2 drops of lunar on the middle edge where you should turn 45° before that. Then take the upper layer, lift it up with your hand slightly above the edge piece and then scramble. If you can buy both weight 5 and a lunar (or better dnm 37) follow this. If not buy a weight 3 silicon based tube and and it to both the core and the center piece. My rs3m is set up with weight 3 on both core and pieces. It works perfect it's been months and I just lube 2 times.
Really helpful! I subbed
0:49 it's funny and it is also true
would weight 5 and dnm 37 be good for this cube?
Did you apply gravitas and dignitas to all the pieces? Or just one piece? Great vids btw, always excited to watch them.
Just one edge piece!
Wow now I feel like my cube is crap after watching this
plz answer to this.i already commented so i hope u see it this time. for the lube, could i maybe use lunar and weight 5 instead? if yes, how would i lube it with lunar and weight 5?
Edit: also, the lunar is for the core, and the weight 5 is for the pieces. good tutorial tho. have a nice day
I don't have lunar, so I'm not sure. But weight 5 should work well!
@@cyoubx ok! jperm recommends lunar for the core, so thats why im asking. im not very familiar with the angstrom lubes and max command, so yea. thx for replying! good tutorial! this was very useful considering that this is the cube im going to be buying soon, and this will help make this awesome cube even better! have a good day!
Edit: i mean compound 10, not max command. im new to lubes, so im not sure how everything works. suggestion: maybe u could make a guide to lube, telling about all the popular ones. just a suggestion. mattress out
bro you insane
Watched your video. Do you lube every piece or just the last 2? You put a liberal amount on the last two. Just wanted to try myself. Thanks!
안녕하세요 한국인은 제가 처음같지만.. 헤헤
좋은 영상 감사합니다☺️ 그 혹시 윤활류?? 윤활제? 는 어디서 구매하셧는지 궁금합니다
아 또한 스프링 소리를 안나게 하시는게 잘이해가 가지않아서.. 시간이 되신다면 작은답변 기다리겠습니다 오늘도 좋은 하루 되시길 바라겠습니다 감사합니다🪖☺️
Wait, this cube isn’t available in black? Guess I’m not getting it after all.
I am avg 15-16 secs, should i start learning coll or winter variation or work on something else?
Winter Variation is not worth learning at all except for a select few good cases. COLL is only worth it if you do OH.
I havent seen any of your solves, but what mostly works is:
- Keep working on your cross to f2l transision
- work on cross+1
try to find your first pair while inspecting and when you start solving try looking at the second pair
(Thats damn hard, but practice makes perfect!)
- work on f2l lookahead
- work on f2l efficiency
You can train that while doing slow/untimed solves
- work on your algorithms and perfect them to a point where you can just spam TPS on LL
If your algs sucks, try switching to better ones
(If you don't know full PLL, learn it)
And the best tip ever:
- record your solves!
Do a avg5, and analyse the solves in slomo
You will find your weaknesses and then you gotta work on them!
That should bring you sub 12 fairly fast =)
@@crateer oke ty
instead of lubicle black in the core you can use weight 5 also to get rid of spring noises
Thx for all the tips but what is the other blue thing that comes in the accessories box? Not the screw driver or tension adjuster but the smaller one that kinda looks like the tension adjuster? How do you use it?
What is the default spring compression, i was messing around with it and I don't know what it is, can someone please tell me that would be much appreciated.
The lowest setting. Keep twisting untill you hear a big click 😊
How to polish a cube?
Cyoubx, is your cube fast, slow, smooth, quiet or anything?
Would you add magnets to the corner pieces?
bro i dont recommended lubing the core to fix spring noise, a lot of people get a issue called "stripped core" what happens here is that the scre unscrews itself due to this sometimes in mid solve a whole layer of cube comes out when ur turning from my experience this happens due to lube in core slowly lossening the screw so just bear with the noise its a 9 dollar cube afterall what do u expect?
What are the screws and the compressions for? Is the screw “ center travel” and compression is “tension?”
I will subbed
What does "3 clicks" mean? Is it from the max clockwise or max counter-clockwise position?
what magnet strength would you recommend for the rs3m 2020?
N38 or N42
THANK YOU!
In the video was 42 I guess
@@rayyanferoz7746 Ok thanks
Mar Jose Enopia welcome :)
Great video! One dumb question, did you only lube one edge piece or all of them?
one is usually enough, what I like to do is lubing two opposite edges
Cool setup! Quick question- Would weight 5 reduce spring noise, and is it an overall good cube lubricant? I know it is nowhere close to lucbicle black, but just wondering (:
I really like weight 5! Should be fine
@@cyoubx Ok Thanks! I know chris olson LOVES weight 5 so I'll take you and cyo's advice to heart (:
What kind magnet did you put in to the cube? I don't wanna order at the cubicle just to order magnets thats only a dollar to be shipped all the way to the Phillipines. And I looked up in the cubicle and there is no specific magnet name (e.g. N45, N50, etc.). Thanks!
Be careful with that spring compression, my cube just popped an entire layer. (Exploded).
is ur core too loose?
What is the magnets you used in the RS3M 2020?
How much of time the cube keeps lubed? After this the recomendation is clean everything and setup again?
Why does it feel like the spring settings barely make a difference? Please reply
Is the rs3m 2020 Moyu? Or mfjs (moyu sub brand) ? Because on the center cap there is the mfjs logo, so is it moyu or mfjs? I mean witch brand is it
Hello, i just want to know what magnets would be nice for the cube, im going to buy the cube and magnet, what magnet works nice with it?
just take cubicle pro shop they set up for you,not perfect,but its really² good
How strong are those extra magnets, cause I cant find anywhere here, are those n42?
Even cyoubx does not know what extra magnets he added but my recommendation is n42 or even n45 . Some people even use n50 but I think that is too strong.
@@Usha_Prasanna yeah, i added extra magnets too, they are n42 and I think they are great but if you want it to be more stable i would recommenf n45
I was going to get the RS3M 2020, but have none of those lubes. Would it be worth it to get the Cubicle Custom edition setup as shown, or should I just get the RS3M and put what little lube I have in it?
Where can you find additional magnets and all of the lube products used here ??
would this setup make the cube slow and gummy or slow without the gummy feel? I personally like a slower more controllable feel without the gummy feeling.
@JBYCuber Haha thx. Also, I was just wondering because the only premium cubes I've gotten were cubicle pro shop
Does the cube come pre-lubed? I want to know if I need to clean it out when I get it.
Nope
I just wanted to ask since I am getting this cube soon I wondered how many magnets do I need? (pls respond if you know)
It already has magnets. So you can just buy strong magnets to upgrade it.
There’s 12 edges and each edge needs 2 magnets so... in total get 24 magnets
@@1976kanthi thankyouu!