I have to disagree with you. Three reasons to start. 1) the power is not moot. This is the top of the line in a battery power ratchet. 60ft/lb of torque and 350 rpm. 2) three different size anvils. That’s three battery, powered ratchets in one. 3) the ability to use the ratchet with the lever on top or bottom. If you’re in a tight space, all you have to do is flip it around and now you have power lever on the backside. It also has LEDs on both sides to light the workspace. Other companies have tried however, Milwaukee has perfected it. Plus, it’s a Milwaukee !!
You're just like every other Milwaukee fan boy. You made 0 valid points. Milwaukee didn't do anything different than anybody else. That's the funny part, and they're charging you more money they are the least innovative tool company on the planet.
@@CPthetooladdict a lot of people are bringing up the same points I did. I think this is gonna be a great tool for people who don’t want to buy three or four battery powered ratchets.
Bro comparing 2003 tech to 2023 tech, never has used the ratchet and already bashing on it. You can use extensions with the 3/8 or 1/4 anvil adapters that come with it. For 299 you’re getting an extended reach 1/4 ratchet AND a 3/8 extended reach ratchet AND a 1/4 hex bit extended reach ratchet. At the end of the day right tool for the right job this is meant to help in tight spaces the fact it can do anything else is a plus… 60ft lbs, 350 rpm’s, extended reach, 1/4 compatible, 3/8 compatible, AND 1/4 hex bjt compatible. This is a good tool. I have it and it’s already been more useful to me then my 3/8 extended reach high speed ratchet ever was and that was my most used tool
It's junk it is a waste of money, and multiple people already have confirmed it, so please enjoy wasting your money. Go watch the torque test channels' latest video as well. Thanks for being offended. Ps the design could only be built one way which is almost identical to the old versions and it did not disappoint it does exactly like the old ones it skips doesn't make the torque and even worse yet it doesn't actually pass thru above 15mm lmao JUNK!!
I feel like people are missing the point on this. Incredible clearance for tight spaces, such as between tires and fender liners, and the ability to use a 1/4 anvil, low clearance milwaukee pass through box sockets, and 1/4 bit adapter. I have been dying for a solution to use my torx 1/4 bits on a ratchet like this. For Collision Repair, this tool looks like it's gonna be a game changer (for me). I probably use my 1/4 milwaukee torx bits more than any other tool, aside from my 10mm grey pnuematic 1/4 deep magnetic impact socket.
I’m not saying your wrong about the ratchet I’m just pointing out that I have a pass through set and it has a 3” and 6” hollow extension. When I used to work mobile it was my go to set as its essentially standard and deep sockets in a smaller package
it has the piece tho for just turning into a 1/4,3/8, or 1/2 also i usually agree with you cp but this seems like a great tool. definitly for someone like me that has short 3/8 and 1/4 but not a extended one. or any 1/2 one which ive had times i wish i had a 1/2 electric ratchet for special tools. you would be 100% right if it didnt have the anvils in the kit and if the alternative wasnt buying 3 electric ratchets to make up the one and still not have the pass through feature. another tech always uses his mac air ratchet swapping anvils and its great
Yeah I was going to comment the same thing, they have the piece so it has an anvil for the extensions if needed. Definitely grabbing this and the normal ratchet
Yea I think what he’s saying is that if you already have a reach ratchet then it’s a waste of money, but if you DONT have one then I see this being the better choice that a standard 3/8” or 1/2” reach. I myself already have the Milwaukee 1/2” reach, but I love buying new tools so eventually i’ll be gettin one of these bad boys!
@@Juggernaut365It is truly an all in one ratchet if it works out. 1/2, 3/8 and 1/4 with high torq and speed. I will be getting one. The reviews should be fun
Just food for thought, if you need an extension why would you use this ratchet? This ratchet is for tight fasteners, not deep areas, my standard electric ratchet does that just fine, just wish this one was in 1/4 form so it was a little smaller.
I totally disagree with your reasoning why they won’t work in the automotive industry. I’ve been wrenching for 15+ yrs, there has been several times where I couldn’t use my electric ratchet because they are to bulky or they have room with a shallow just to have the bolt protrude to far out and can’t reach the nut.
Good luck you clearly have never used these and I have so waste your money and we will see who's right in the end I've been there and done it you haven't your giving a opinion I'm stating facts.
@@CPthetooladdict I have used them. I own a gear wrench set. Not electric but for same purpose. And you are not giving a fact, it’s your opinion on how it worked for you. Others will disagree with you because it works for them, like it has for me.
How is it a opinion that matco and craftsman both had a Pneumatic and cordless version that failed please explain that do you know the difference between facts and opinions or do you just try to make excuses for junk tools to waste money on? Lmao
like you said in an automotive application they aren't that useful, but the auto pipe cutter wouldn't be useful in the automotive trade either... I guess I don't see the point in shitting on a specialty tool just because your trade doesn't use them. It'd be like me calling a high torque impact worthless because I don't use it in hvac, chill out with the negativity my dude
Seems like you named a few applications that it could be useful for tight spaces, all thread, fencing…. Stats are good and it does what the snap on does… what’s the problem? Maybe don’t go buy this if you already have an extended reach battery ratchet and don’t need to spend 400 on those few instances. But it seems like a great tool for a lot of people.
I have the Gearwrench pass thru sets, and don’t use them much, but I have used them. I use the 1/2” size the most, for taking nuts off the top of struts when you have to put a hex or torx in the shaft. And I’ve used it on harmonic balancer installers. The nice thing about those sets is they do have an extension or two!
When does it release? I want it for the 60 foot pounds and the speed. I've waited long enough for Dewalt to release that sealed head cordless ratchet but it doesnt look like it's coming. I think the people who make that design of ratchet head have Matco barking at them not to sell them to dewalt or make the ratchet because people will just buy the dewalt one over theirs.
I have the cheap Pittsburgh pass-through ratchet. In the automotive world, rarely do you need it, but there are times where it's handy, if not necessary. I think i paid like $20, the kit is now $25, but it does come with an extension. I use it maybe twice a year, but it's useful in those moments. If you have a nice set ot ratcheting box end wrenches, there is virtually 0 need to get a pass through ratchet.
Got a craftsman universal max axess 85 piece set back when sears was going out of business. Still the widest range pass through set I've seen to date. Routinely see them go for 4x-5x on the used market what I paid for it new. When you need them, they're amazing to have.
I had a craftsman pass through that I got in the late 80s early 90s range. I have an Armstrong set that I got at a garage sell. I put it in the my truck and have used it a few times. Both those sets had one extension, 3 inches long or so.
I'm not going to defend this electric ratchet, but I have found the passthrough stuff to be useful when youre working with some suspension parts. Off the top of my head is balljointish style swaybar links where you need to hold the stud in place while you tighten the nut, these are nice when you think of them. You can usually get away with using a ratching wrench and a socket+ratchet/breaker bar, but some applications the wrench head is a tight fit. GM pitman and idler arms are also like this, but the pinch nut is usually so tight that you need much more leverage than a normal passthrough ratchet gives. Suppose you can also always just hold the nut in place while you impact the stud reverse wise, but wheres the fun in that?
This tool would be a game changer for me as an Hvac commercial installer building duct hangers and hanging equipments with threaded rod. Currently I use the klein pass through 9/16 nut driver but this brings it up a notch and the productivity would be unmatched!
I have the craftsman hand pass through ratchet set i got it for Christmas years ago I find it pretty useful for stuff around the farm but I could see in automotive where it wouldn’t be that useful
u could just use 3/8anvil socket that goes in it , it just the new highspeed modfied , most defnitely coud use on automotive , better have thannot have kind of thing, wich half of my toolbox is ,,, id still prefer the 3/8 high speed over this the head is smaller, could get short sockets and be even smaller than that tool , i see ur point but its not a complete waste, it could come in handy on automotive actually, like the battery holders with thread and 10mm nut, this would be perfect for, maybe not ton of uses, but not worthless n my opinion, its cool idea
@@brettwalkom948 has same bottom end, same neck,just different head, the specs are gonna be different , given the size of the head, different anvil.geared more toward torque, the 1/2 ratchet makes 60lbs, it just looks very similar , looks like extended high speed with different head on it to me idk,
I don't know how it is in other places but in the UK anti roll links and strut top mounts this would come in handy. I don't think it's necessarily for everything but we do alot of spring/shock absorbers and drop links with the pass through is useful
I work at a PVC pipe manufacturing facility, there’s alot of stuff that is in tight quarters that doesn’t require an extension. I couldn’t count the times where the socket was just long enough that I couldn’t get it over the bolt. Ratchet wrench usually does, but time = money! It is fun though when you tighten a bolt and bolt sticks out enough to capture the ratchet and you can’t get it off Lol, good times!
Being an industrial mechanic, I have used pass through sockets and ratchets often. All- thread and hydraulic jacks is the way we remove parts. I would love to get my hands of an electric ratchet to fit my Gearwrench stuff, but there is no way I would invest in a new format of socket.
I always just use a ratchet wrench instead of a pass through. But I could see it being very useful in construction where you would have all thread and then just put a normal anvil adapter in for most things. Means only have to carry one tool around. Could be useful in automotive too because you would have both but not something I would add to my collection since I already have a normal m12 ratchet from Milwaukee.
I can honestly say I've never had a issue with a extra deep socket or a offset wrench both I own and I bought that tool back in the day for the same reason pass thru is a total gimmick it has existed for nearly 2 decades and never been a must have tool.
"You still need extensions"?! I've had a Kobalt set for at LEAST 15 years and it came with extensions. They have held up EXTREMELY well. Best set I've ever had.
Well it’s good that I watched this video because I was thinking about getting this one as my first cordless ratchet. I didn’t even think about throwing extensions on there. What do you think about the atomic 20v dewalt cordless ratchet?
i do building mechanical work. the pass through works because i need to run nuts up entire lengths of threaded rod all day. if a 3/8 rod can pass through while I run up the nut this is EXACTLY what I need.
Here’s an unrelated question. Are the Cornwell 9 way 5 lb slide hammer kits manufactured by the same factory putting out the gear wrench and hazard fart Maddox versions? They look identical and I am curious because I have an opportunity to pick one up used for $60 might even be able to wiggle it down to $50
I agree CP, stupid idea? How do you extend the sockets, you don't have any way to? I've lived and worked 30 years without it, so I don't think I'm missing much? Maybe if your building frames or structural steel bolted components, but a deep socket will do the job fine, plus they make extra deep sockets? new hardware will not need to be run down with power or hand tools, just by your fingers, so I don't see the need for this type of tool, myself? Maybe reusing rusted ass fasteners or something?
CP, there's likely many practical uses for this in automotive. No one has done every job so some will find great uses for it. Personally, im not interested in it but someone who is heavily invested in the M12 platform would probably jump on it and find a use for it. Just curious, would you say the same thing if it was yellow and said Dewalt?? No hate, still love ya brother!!!
Only thing I can think of to use a pass through for is strut or sway bar link nuts with the hex on the rods inside. But u can just use a wrench. Thanks for sharing cp!!!
It could be used in situations where you need a deep well socket, but there's not enough clearance above the bolt to access without a shallow set up. Much like the patented double box end ratcheting wrenches that everyone rebrands. Or all thread applications. @@CPthetooladdict
These would be very helpful in aviation. I deal with a lot of v-band clamps and having a pass through ratchet to take nuts off would be very helpful. At the moment you have to use a ratcheting wrench to get the nut off far enough to switch to a deep socket
@@CPthetooladdict it would also be useful in tight spots too instead of using extensions and wobbly sockets too. Aviation is strange, engineers have all the space in the world to put stuff, but they choose to bunch it up as tight as possible
@@CPthetooladdict it doesn't revolutionize anything, it's a tool that would be useful in my situation. I already have the batteries and charging systems to use it. Not everything has to be the new end all be all of tools, but if it works great for what you need and makes your job easier, why not use it. A set of the extra deep sockets is already almost $300, why not spend a little more and get something that does a lot more
I have a hand set made by crescent. For construction they come in handy for a few things when working with threaded rod but I still don’t use them near as much as I thought I would. A cheap hand set for just in case is all a person needs for the amount it’ll get used
Idk about y’all but I use my flex head ratcheting wrenches all the time. Saves me the hassle from switching sockets back and fourth on my hand ratchet. This tool is all about being the most compact wrench, what does it matter if it’s pass through you guys act like your bolt is going to fall out the other side. If you don’t like it then put the anvil on it and use it that way. For someone who’s in the market for a extended reach ratchet I’d 100% buy this.
An older tech i know echoed your sentiment. He has a similar set with pass thru extensions and he has it at the bottom of the box cause it's never been exclusively useful. He did mention "maybe they'll give it away as a free tool in the starter sets or the tool trucks could raffle it". 😂
I disagree they work great in the trades. Love your channel CP but we tradesman use them all the time but i get your a mechanic and might not have a need for it
Go into the ag world where you have 6"+ long tensioner bolts. I bought the KRC Cyclone ratchet for that reason, and it comes with pass through extensions. They're the only one I would recommend.
I am happy with my astro nano sockets and gearwrench pass through set. Depends on your trade, and I can see carpenters using it a lot. You're looking at it only through automotive eyes, what you need, and not considering the bigger picture. There are many markets for Milwaukee to push this tool and save time over manual pass through sets. You like rum, another likes vodka. .....Milwaukee will do fine with this product.
@vancamper7650 I suppose you're right. Given that this is a comment on a primarily automotive tool channel. Just like the scanners, oil filter wrenches, etc. I tend to only evaluate its usefulness or lack there of, in an automotive capacity. I'd imagine if I was commenting or viewing this on a carpenter equipment channel, I would think differently about it. Or I would let the automotive guys have their own discussions and opinions without shoehorning every other industry into the conversation. Since when does every single thing in existence have to be all inclusive. It's super easy to find a channel where you can talk about claw hammers and whatever else you want.
I would not by the pass thru ratchet myself. I want one of the 3/8 drive units tho..I'm a serious diy guy and already am into the milwaukee eco system..i
I agree with your thoughts on this ratchet. It’s been tried before and failed but you slap a Milwaukee sticker on a tool and it will sell like hot cakes.
Of course you could. You would need an adapter to fill in the open head, like the non electric ones have or like the ones for wrenches. It’s a specialty tool, though overall.
@@bigpicturethinking5620 it comes with the passthrough sockets that are just anvils 1/4,3/8 and 1/2 its literally just giving you all 3 of them for 1 and you have the added bonus of the pass through in the rare times you need that
Great video as usual what do you think of the extended reach quarter m12 fuel. I have the older bulkier version of the 3/8 extended fuel I do like it just wish they had snap-on style trigger. Just looking for something with less profile for 1/4 work.
Your boy Mr stubaru Is losing his mind over how great this is. And making it seem like Milwaukee reinvented the thing with this thanks for the info about all the other companies that have had it
I got a craftsman pass thru set years ago. It sits in my box taking up space. I also got a kobalt set for $2.97 on the clearance rack of lowes years ago. I did use it once, when i put a new toilet in my house. Works great for the nuts on the toilet base. Other than that, fucking useless lol.
Also, if anyone wants to buy a craftsman complete set in blow molded case - $40 i got you fam. Will even throw in a milwaukee sticker for the case for an extra $5 lol.
So could you with the original design the pass thru portion is useless then mac and dewalt as well as makita already have the interchangeable anvils for less money than the Milwaukee so I guess if you still don't understand it's because you lack the information and experience.
@@CPthetooladdict this is Milwaukee though. They are known for being one of the best. I would expect this set to be better than the ones you mentioned. Milwaukee is known for its high torque, reliability, durability, and speed. This tool just about replaced their entire cordless ratchet line-up. We have to wait till we get it to see how it compares. It be sweet if it had the speed of the high speed line up and torque of the m12 fuel ratchet. Guess we have to wait and see. I'm anxious 😬
Electricians , industrial maintenance is the market for these . People that have to wrench on all thread . Can't see mechanics whether small engine or heavy equipment/ Marine diesel being interested or needing pass thru much
All you said is all hate and not even one real comment of why not to buy it, it is practical, it gives you an extra option, but the regular ones they just don't, and also gives you almost twice the torque as the regular one, I don't see any cons of getting this one compare to the other old style besides the length that's all, the length...
@CPthetooladdict in 3 years, I'll be retired and no more wrenching! For now, that ratchet will save me time when I have 76 nut and bolt air modules to remove. I already have the sockets from a discounted Kobalt set.
This is great for those Milwaukee users that came before mechanics started using them. The electricians and plumber and tradesman's. Those are the only people I can see buying this tool and thinking it's "awesome"
nah im a tech and this tool looks great, it comes with the 1/4,3/8,and 1/2 anvils for it beats buying all 3 of the ratchets and itd be my first extended one which ive been wanting
@@bstamand1985 for sure i am, but if your trying to use my age as a way to discredit my opinion i could also say your just a dinosaur or a fossil. all techs do different jobs and a large variety of jobs having a tool that does more jobs for less coin is how you decide if a tool is worth buying. itd be dumb to defend buying 3 ratchets over one especially since you probably arent using the extended one all the time anyways
@@shaunclancey1107 but it's clear you're part of the red army bro. To each his own. I've never ran into a spot this tool would make me more money than what's already out there. And I've worked on everything from cars to trains to gps guided cranes and CNC equipment.
@ADHD Workshop I use everything matco snap on mostly Mac and I've had issues with some milwaukee stuff for example there sockets were so hard it sheared the corners off my snap on extensions I don't have brand loyalty I just think this is a cost saving tool at least for me who just works on passenger vehicles and some diesels where space is limited and range from some wild sizes and special tools
It's still better than a stubby socket stubby doesn't work on nut with a few threads! Think about tons of places Just cause it doesn't work on sparkplugs for u plenty of jobs it will!!
they have extensions for them. IMO still not a tool you use. cp is right there is a reason why the matco ones are no longer sold have a set and it been used once or twice in the past ten years. a good low pro setup will do better not every bolt and nut has to go on as fast as possible sometimes hand tools are the right call.
![How To Fix Milwaukee M12 FUEL Ratchets [Cordless Ratchet Repair]](http://i.ytimg.com/vi/R2f96gKe1XQ/mqdefault.jpg)
I have to disagree with you. Three reasons to start.
1) the power is not moot. This is the top of the line in a battery power ratchet. 60ft/lb of torque and 350 rpm.
2) three different size anvils.
That’s three battery, powered ratchets in one.
3) the ability to use the ratchet with the lever on top or bottom. If you’re in a tight space, all you have to do is flip it around and now you have power lever on the backside. It also has LEDs on both sides to light the workspace.
Other companies have tried however, Milwaukee has perfected it.
Plus, it’s a Milwaukee !!
You're just like every other Milwaukee fan boy. You made 0 valid points. Milwaukee didn't do anything different than anybody else. That's the funny part, and they're charging you more money they are the least innovative tool company on the planet.
@@CPthetooladdict a lot of people are bringing up the same points I did. I think this is gonna be a great tool for people who don’t want to buy three or four battery powered ratchets.
I also disagree...This tool fits every application that I need, so rather than buy 3 different ones, I actually saved money.
Bro comparing 2003 tech to 2023 tech, never has used the ratchet and already bashing on it. You can use extensions with the 3/8 or 1/4 anvil adapters that come with it. For 299 you’re getting an extended reach 1/4 ratchet AND a 3/8 extended reach ratchet AND a 1/4 hex bit extended reach ratchet. At the end of the day right tool for the right job this is meant to help in tight spaces the fact it can do anything else is a plus… 60ft lbs, 350 rpm’s, extended reach, 1/4 compatible, 3/8 compatible, AND 1/4 hex bjt compatible. This is a good tool. I have it and it’s already been more useful to me then my 3/8 extended reach high speed ratchet ever was and that was my most used tool
It's junk it is a waste of money, and multiple people already have confirmed it, so please enjoy wasting your money. Go watch the torque test channels' latest video as well. Thanks for being offended. Ps the design could only be built one way which is almost identical to the old versions and it did not disappoint it does exactly like the old ones it skips doesn't make the torque and even worse yet it doesn't actually pass thru above 15mm lmao JUNK!!
I feel like people are missing the point on this. Incredible clearance for tight spaces, such as between tires and fender liners, and the ability to use a 1/4 anvil, low clearance milwaukee pass through box sockets, and 1/4 bit adapter. I have been dying for a solution to use my torx 1/4 bits on a ratchet like this. For Collision Repair, this tool looks like it's gonna be a game changer (for me). I probably use my 1/4 milwaukee torx bits more than any other tool, aside from my 10mm grey pnuematic 1/4 deep magnetic impact socket.
Amen. Yust got mine for that aswell
I’m not saying your wrong about the ratchet I’m just pointing out that I have a pass through set and it has a 3” and 6” hollow extension. When I used to work mobile it was my go to set as its essentially standard and deep sockets in a smaller package
it has the piece tho for just turning into a 1/4,3/8, or 1/2 also i usually agree with you cp but this seems like a great tool. definitly for someone like me that has short 3/8 and 1/4 but not a extended one. or any 1/2 one which ive had times i wish i had a 1/2 electric ratchet for special tools. you would be 100% right if it didnt have the anvils in the kit and if the alternative wasnt buying 3 electric ratchets to make up the one and still not have the pass through feature. another tech always uses his mac air ratchet swapping anvils and its great
Yeah I was going to comment the same thing, they have the piece so it has an anvil for the extensions if needed. Definitely grabbing this and the normal ratchet
Grab yourself a low profile ⅜ to half adapter,
Yea I think what he’s saying is that if you already have a reach ratchet then it’s a waste of money, but if you DONT have one then I see this being the better choice that a standard 3/8” or 1/2” reach. I myself already have the Milwaukee 1/2” reach, but I love buying new tools so eventually i’ll be gettin one of these bad boys!
@@Juggernaut365 spot on rod
@@Juggernaut365It is truly an all in one ratchet if it works out. 1/2, 3/8 and 1/4 with high torq and speed. I will be getting one. The reviews should be fun
Just food for thought, if you need an extension why would you use this ratchet? This ratchet is for tight fasteners, not deep areas, my standard electric ratchet does that just fine, just wish this one was in 1/4 form so it was a little smaller.
There are extensions for passthrough
This would be awesome for agricultural work especially combines with long tensioners but it needs to pass thru up to 15/16 sockets
I totally disagree with your reasoning why they won’t work in the automotive industry. I’ve been wrenching for 15+ yrs, there has been several times where I couldn’t use my electric ratchet because they are to bulky or they have room with a shallow just to have the bolt protrude to far out and can’t reach the nut.
Good luck you clearly have never used these and I have so waste your money and we will see who's right in the end I've been there and done it you haven't your giving a opinion I'm stating facts.
@@CPthetooladdict I have used them. I own a gear wrench set. Not electric but for same purpose. And you are not giving a fact, it’s your opinion on how it worked for you. Others will disagree with you because it works for them, like it has for me.
How is it a opinion that matco and craftsman both had a Pneumatic and cordless version that failed please explain that do you know the difference between facts and opinions or do you just try to make excuses for junk tools to waste money on? Lmao
@@CPthetooladdict 🤣👍
🤔
like you said in an automotive application they aren't that useful, but the auto pipe cutter wouldn't be useful in the automotive trade either... I guess I don't see the point in shitting on a specialty tool just because your trade doesn't use them. It'd be like me calling a high torque impact worthless because I don't use it in hvac, chill out with the negativity my dude
Seems like you named a few applications that it could be useful for tight spaces, all thread, fencing…. Stats are good and it does what the snap on does… what’s the problem? Maybe don’t go buy this if you already have an extended reach battery ratchet and don’t need to spend 400 on those few instances. But it seems like a great tool for a lot of people.
I have the Gearwrench pass thru sets, and don’t use them much, but I have used them. I use the 1/2” size the most, for taking nuts off the top of struts when you have to put a hex or torx in the shaft. And I’ve used it on harmonic balancer installers. The nice thing about those sets is they do have an extension or two!
I could see this being used to run bolts up all thread in my trade. Kinda want it
I definitely could see it for use for other trades not for automotive
@@CPthetooladdict like if I were to buy one electric ratchet for work it would be that one. Seems like it has the most utility
I have the snap on pass through air ratchet, I use it ever day, I do have an extension for it as well, it's amazing for under dashs
What for?
@CP The Tool Addict I use it for under dash, boost clamps,, then the attachment for a normal ⅜ to do everything else
@@beekerscustoms so basically what a ratchet wrench can do or a extra deep socket gotcha
@@CPthetooladdict I don't think you could get an extra deep socket under the dash ever, but hey you do you bro
A year later, and so many people have called this ratchet useless funny people try to defend it when it's hot garbage. Lol
Work in Aviation and I would love to have something like this for all the tight spots forward of the firewall.
Thinking the same thing!
When does it release? I want it for the 60 foot pounds and the speed. I've waited long enough for Dewalt to release that sealed head cordless ratchet but it doesnt look like it's coming. I think the people who make that design of ratchet head have Matco barking at them not to sell them to dewalt or make the ratchet because people will just buy the dewalt one over theirs.
Dude!!! Thanks for sharing this I totally forgot about that craftsman one! That was such a nostalgic ratchet for me, my craftsman stereo still works!
Mine too! I love my 19.2 craftsman radio I will fight someone if they try to take it from me.
@@CPthetooladdict 😂😂😂
I have the cheap Pittsburgh pass-through ratchet. In the automotive world, rarely do you need it, but there are times where it's handy, if not necessary. I think i paid like $20, the kit is now $25, but it does come with an extension.
I use it maybe twice a year, but it's useful in those moments.
If you have a nice set ot ratcheting box end wrenches, there is virtually 0 need to get a pass through ratchet.
Got a craftsman universal max axess 85 piece set back when sears was going out of business. Still the widest range pass through set I've seen to date. Routinely see them go for 4x-5x on the used market what I paid for it new. When you need them, they're amazing to have.
Craftsman set has extensions !
I had a craftsman pass through that I got in the late 80s early 90s range. I have an Armstrong set that I got at a garage sell. I put it in the my truck and have used it a few times. Both those sets had one extension, 3 inches long or so.
I'm not going to defend this electric ratchet, but I have found the passthrough stuff to be useful when youre working with some suspension parts. Off the top of my head is balljointish style swaybar links where you need to hold the stud in place while you tighten the nut, these are nice when you think of them. You can usually get away with using a ratching wrench and a socket+ratchet/breaker bar, but some applications the wrench head is a tight fit. GM pitman and idler arms are also like this, but the pinch nut is usually so tight that you need much more leverage than a normal passthrough ratchet gives. Suppose you can also always just hold the nut in place while you impact the stud reverse wise, but wheres the fun in that?
This tool would be a game changer for me as an Hvac commercial installer building duct hangers and hanging equipments with threaded rod. Currently I use the klein pass through 9/16 nut driver but this brings it up a notch and the productivity would be unmatched!
I have the craftsman hand pass through ratchet set i got it for Christmas years ago I find it pretty useful for stuff around the farm but I could see in automotive where it wouldn’t be that useful
u could just use 3/8anvil socket that goes in it , it just the new highspeed modfied , most defnitely coud use on automotive , better have thannot have kind of thing, wich half of my toolbox is ,,, id still prefer the 3/8 high speed over this the head is smaller, could get short sockets and be even smaller than that tool , i see ur point but its not a complete waste, it could come in handy on automotive actually, like the battery holders with thread and 10mm nut, this would be perfect for, maybe not ton of uses, but not worthless n my opinion, its cool idea
With 60ftlbs it definitely isn't just a high speed modified
@@brettwalkom948 has same bottom end, same neck,just different head, the specs are gonna be different , given the size of the head, different anvil.geared more toward torque, the 1/2 ratchet makes 60lbs, it just looks very similar , looks like extended high speed with different head on it to me idk,
@@bestblackoutvideos I'd say the outside plastic housing is probably the same but the gearing has to be different and the head
I don't know how it is in other places but in the UK anti roll links and strut top mounts this would come in handy. I don't think it's necessarily for everything but we do alot of spring/shock absorbers and drop links with the pass through is useful
Ya well I thought that back in the day but without the the extensions they don't work
I work at a PVC pipe manufacturing facility, there’s alot of stuff that is in tight quarters that doesn’t require an extension. I couldn’t count the times where the socket was just long enough that I couldn’t get it over the bolt. Ratchet wrench usually does, but time = money! It is fun though when you tighten a bolt and bolt sticks out enough to capture the ratchet and you can’t get it off Lol, good times!
Being an industrial mechanic, I have used pass through sockets and ratchets often. All- thread and hydraulic jacks is the way we remove parts. I would love to get my hands of an electric ratchet to fit my Gearwrench stuff, but there is no way I would invest in a new format of socket.
Klein makes a right angle cordless impact but it is designed for linemen so looks like pass thru is set for square nuts and 3/4 and 13/16 sockets
I always just use a ratchet wrench instead of a pass through. But I could see it being very useful in construction where you would have all thread and then just put a normal anvil adapter in for most things. Means only have to carry one tool around. Could be useful in automotive too because you would have both but not something I would add to my collection since I already have a normal m12 ratchet from Milwaukee.
Only time I can see a pass through ratchet would be of any use is taking apart shocks/struts
How many times do you do that a year? Lol
@@CPthetooladdict been a while at my current place but back at BMW did it quite a bit
I can honestly say I've never had a issue with a extra deep socket or a offset wrench both I own and I bought that tool back in the day for the same reason pass thru is a total gimmick it has existed for nearly 2 decades and never been a must have tool.
"You still need extensions"?! I've had a Kobalt set for at LEAST 15 years and it came with extensions. They have held up EXTREMELY well. Best set I've ever had.
Seems more of a tool for contruction trades, not automotive. When i actually need something "pass through", a ratcheting wrench works just fine.
Well it’s good that I watched this video because I was thinking about getting this one as my first cordless ratchet. I didn’t even think about throwing extensions on there. What do you think about the atomic 20v dewalt cordless ratchet?
Awesome 👌 I'd rock it
i do building mechanical work. the pass through works because i need to run nuts up entire lengths of threaded rod all day. if a 3/8 rod can pass through while I run up the nut this is EXACTLY what I need.
It may not be super useful in automotive but there are other fields of work that would find this very useful
I have Gearwrench all the kits (1/4, 3/8, and 1/2) , all of them come with extensions.
I bought blue point pass thru cause they looked cool but I never used them once haha 😅😅😅
Here’s an unrelated question. Are the Cornwell 9 way 5 lb slide hammer kits manufactured by the same factory putting out the gear wrench and hazard fart Maddox versions? They look identical and I am curious because I have an opportunity to pick one up used for $60 might even be able to wiggle it down to $50
In all of my years of working on stuff I have never needed a pass-through tool that couldn’t be easily done with a standard ratcheting wrench.
Exactly 💯
They need to market it to new commercial construction vs mechanics. That'd be awesome to use vs box end ratcheting on hanger rods for the jam nuts.
A mate of mine does rural fencing, he has to run nuts down 4-6foot of threaded rod sometimes, he'd love this tool.
the only thing about this that has me interested is that you can put the socket the opposite direction so the paddle is out of the way.
Hello again, CP
Thank you for another Great Video 👍 And thank you for the advice. I almost bought one of these ratchets. Again thank you 😊
Glad to help
I agree CP, stupid idea? How do you extend the sockets, you don't have any way to? I've lived and worked 30 years without it, so I don't think I'm missing much? Maybe if your building frames or structural steel bolted components, but a deep socket will do the job fine, plus they make extra deep sockets? new hardware will not need to be run down with power or hand tools, just by your fingers, so I don't see the need for this type of tool, myself? Maybe reusing rusted ass fasteners or something?
I've had the extension they're like a tube with the internal hex on one end and internal on the other
CP, there's likely many practical uses for this in automotive. No one has done every job so some will find great uses for it. Personally, im not interested in it but someone who is heavily invested in the M12 platform would probably jump on it and find a use for it. Just curious, would you say the same thing if it was yellow and said Dewalt?? No hate, still love ya brother!!!
Might be useful for air to air clamps and turbo clamps on trucks but i just use extra deep socks...much cheaper that way
Lol 400 for the set I don't think so lol
Only thing I can think of to use a pass through for is strut or sway bar link nuts with the hex on the rods inside. But u can just use a wrench. Thanks for sharing cp!!!
Cool idea
I've got a pass thru ratchet set that I use once and a blue moon
.top of a strut or exaust stud or something odd like that....js
Love the pass through sockets. I use them daily. I’ll def be adding this to my travel box.
What for I'd like to here the applications
It could be used in situations where you need a deep well socket, but there's not enough clearance above the bolt to access without a shallow set up. Much like the patented double box end ratcheting wrenches that everyone rebrands. Or all thread applications. @@CPthetooladdict
These would be very helpful in aviation. I deal with a lot of v-band clamps and having a pass through ratchet to take nuts off would be very helpful. At the moment you have to use a ratcheting wrench to get the nut off far enough to switch to a deep socket
Why don't you buy an extra deep socket? Don't get me wrong. Spending four hundred dollars on a ratchet seems more practical.
@@CPthetooladdict it would also be useful in tight spots too instead of using extensions and wobbly sockets too. Aviation is strange, engineers have all the space in the world to put stuff, but they choose to bunch it up as tight as possible
So you're telling me that a tool that's been out for 2 decades Is going to improve the industry because it says Milwaukee on it now? Lmao 👌 🤣
@@CPthetooladdict it doesn't revolutionize anything, it's a tool that would be useful in my situation. I already have the batteries and charging systems to use it. Not everything has to be the new end all be all of tools, but if it works great for what you need and makes your job easier, why not use it. A set of the extra deep sockets is already almost $300, why not spend a little more and get something that does a lot more
Cp, this ratchet is amazing for timing covers and brake jobs on Hondas.
I think this is for all thread and such for fire sprinkler, fence and deck roughing in rafters etc. Not so much aimed at automotive.
I have a hand set made by crescent. For construction they come in handy for a few things when working with threaded rod but I still don’t use them near as much as I thought I would. A cheap hand set for just in case is all a person needs for the amount it’ll get used
I agree have a kobalt pass thru and hardy ever use it. Good for all thread that is about it. Keep the videos coming.
Thanks, will do!
Idk about y’all but I use my flex head ratcheting wrenches all the time. Saves me the hassle from switching sockets back and fourth on my hand ratchet. This tool is all about being the most compact wrench, what does it matter if it’s pass through you guys act like your bolt is going to fall out the other side. If you don’t like it then put the anvil on it and use it that way. For someone who’s in the market for a extended reach ratchet I’d 100% buy this.
Cool story
Well, boy, I ordered mine about six hours ago lol so I guess we’ll just have to see how it goes🔧😃🔧
Can't wait to hear your thoughts after having one I been down this road before so my wallet is out lol
Gearwrench, cobalt, craftsman....they all also made pass-through extensions to fit.
To fit their ratchet which is pointless damn near because a deep socket will work on pretty much all auto applications so it's useless.
Interesting take CP, I always enjoy your opinion on many tools. Made me think of this ratchet a completely different way.
Good to hear!! The Milwaukee influencers all lied through their teeth, not to mention its only pass tru is up to like 14mm or something dumb lol
An older tech i know echoed your sentiment. He has a similar set with pass thru extensions and he has it at the bottom of the box cause it's never been exclusively useful. He did mention "maybe they'll give it away as a free tool in the starter sets or the tool trucks could raffle it". 😂
I disagree they work great in the trades. Love your channel CP but we tradesman use them all the time but i get your a mechanic and might not have a need for it
Fair enough
So does it have a thinner head with the 3/8th anvil, than the 2569? It also have 50% more torque than the 2569.
No
Go into the ag world where you have 6"+ long tensioner bolts. I bought the KRC Cyclone ratchet for that reason, and it comes with pass through extensions. They're the only one I would recommend.
I live in iowa grew up on a dairy farm been fixing tractors since I was 10 bud.
Excellent points for the would be buyer! 😃👍
Thanks! 👍
will my craftsman pass through sockets fit?
No
@@CPthetooladdict so you’ve tried this?
For the rare cases I could use this, I'll stick with my astro nano sockets and a ratcheting wrench 😉
I am happy with my astro nano sockets and gearwrench pass through set. Depends on your trade, and I can see carpenters using it a lot. You're looking at it only through automotive eyes, what you need, and not considering the bigger picture. There are many markets for Milwaukee to push this tool and save time over manual pass through sets. You like rum, another likes vodka. .....Milwaukee will do fine with this product.
@vancamper7650 I suppose you're right. Given that this is a comment on a primarily automotive tool channel. Just like the scanners, oil filter wrenches, etc. I tend to only evaluate its usefulness or lack there of, in an automotive capacity. I'd imagine if I was commenting or viewing this on a carpenter equipment channel, I would think differently about it. Or I would let the automotive guys have their own discussions and opinions without shoehorning every other industry into the conversation. Since when does every single thing in existence have to be all inclusive. It's super easy to find a channel where you can talk about claw hammers and whatever else you want.
I would not by the pass thru ratchet myself.
I want one of the 3/8 drive units tho..I'm a serious diy guy and already am into the milwaukee eco system..i
Agreed. I tried the pass thru idea when it came out years ago. It's just not practical in most applications.
"Special Needs Ratchet" lol
Nailed it!
I agree with your thoughts on this ratchet. It’s been tried before and failed but you slap a Milwaukee sticker on a tool and it will sell like hot cakes.
Hey cp so u cant use extension on this ratchet?
Of course you could. You would need an adapter to fill in the open head, like the non electric ones have or like the ones for wrenches. It’s a specialty tool, though overall.
@@bigpicturethinking5620 it comes with the passthrough sockets that are just anvils 1/4,3/8 and 1/2 its literally just giving you all 3 of them for 1 and you have the added bonus of the pass through in the rare times you need that
you can see the 1/4 one behind the tool in the pictures
Yes, the adapter is included in the socket set. I primarily find that to be conter productive if you already own any cordless ratchet, though.
@@CPthetooladdict I had a pass through set with extensions.. they're like a tube with internal hex one end and external the other
I use to have the craftsman before any other cordless ratchet. Too fun to see this come out
It will be great in the Agricultural industry.
Great video as usual what do you think of the extended reach quarter m12 fuel. I have the older bulkier version of the 3/8 extended fuel I do like it just wish they had snap-on style trigger. Just looking for something with less profile for 1/4 work.
Not bad
More construction then automotive.
Your boy Mr stubaru Is losing his mind over how great this is. And making it seem like Milwaukee reinvented the thing with this thanks for the info about all the other companies that have had it
My thoughts exactly
I can see myself using it on struts with a hex bit through the middle and on sway bar end links
Didn't black and decker try this year's ago
Yep
I got a craftsman pass thru set years ago. It sits in my box taking up space. I also got a kobalt set for $2.97 on the clearance rack of lowes years ago. I did use it once, when i put a new toilet in my house. Works great for the nuts on the toilet base. Other than that, fucking useless lol.
Also, if anyone wants to buy a craftsman complete set in blow molded case - $40 i got you fam. Will even throw in a milwaukee sticker for the case for an extra $5 lol.
I'm confused because you actually can attach an extension with the 1/4 and 3/8 anvil included in the kit. This is like 3 ratchets in one.
So could you with the original design the pass thru portion is useless then mac and dewalt as well as makita already have the interchangeable anvils for less money than the Milwaukee so I guess if you still don't understand it's because you lack the information and experience.
@@CPthetooladdict this is Milwaukee though. They are known for being one of the best. I would expect this set to be better than the ones you mentioned. Milwaukee is known for its high torque, reliability, durability, and speed. This tool just about replaced their entire cordless ratchet line-up. We have to wait till we get it to see how it compares. It be sweet if it had the speed of the high speed line up and torque of the m12 fuel ratchet. Guess we have to wait and see. I'm anxious 😬
Electricians , industrial maintenance is the market for these . People that have to wrench on all thread . Can't see mechanics whether small engine or heavy equipment/ Marine diesel being interested or needing pass thru much
Expensive tool to remove rear struts and old bicycle wheels.
All you said is all hate and not even one real comment of why not to buy it, it is practical, it gives you an extra option, but the regular ones they just don't, and also gives you almost twice the torque as the regular one, I don't see any cons of getting this one compare to the other old style besides the length that's all, the length...
As an electrician. It’d be sweet for all thread.
I will buy one for aviation work, it will be perfect for me! I use my pass-through sockets every day!
Good for you, when they are discontinued in 3yrs you can say the same thing. I did just remember that I told you so in advance.
@CPthetooladdict in 3 years, I'll be retired and no more wrenching! For now, that ratchet will save me time when I have 76 nut and bolt air modules to remove. I already have the sockets from a discounted Kobalt set.
passthru kits have always had extensions.
No they didn't
i got it for the 1/4 3/8 and 1/2 inch anvil on one ratchet. I really did not want to buy three different ratchets,
How did I know he was gonna hate on Milwaukee. If a steak said Milwaukee on it CP would hate it automatically
It's because of idiots like you so take a bow.
Still has a flapper paddle that catches on things
Ugh
Thanks for the warning. I bought so many things that you recommended. I’m glad you saved me from buying this one.
Glad I could help!
I got a I think Gearwrench pass through set like 25 years ago. Thought it was pretty cool. Came with extensions too. Never used it once.
Thanks for sharing!
I'm still waiting for the ratchet that will do the job for me 😉
You and me both! Lol
I'm gonna be buying it to run nuts up a 3/8 rod, right now I use a ratchet wrench and it takes forever.
Good luck they aren't released yet !
@@CPthetooladdict I know, they don't come out till August I think. If the 9/16 sockets are not a feed thru I'll have to skip it.
pass through is more useful for construction worker. Not for auto. Well said CP.
This is great for those Milwaukee users that came before mechanics started using them. The electricians and plumber and tradesman's. Those are the only people I can see buying this tool and thinking it's "awesome"
nah im a tech and this tool looks great, it comes with the 1/4,3/8,and 1/2 anvils for it beats buying all 3 of the ratchets and itd be my first extended one which ive been wanting
@@shaunclancey1107 😂😂 I bet you're in your twenties.
@@bstamand1985 for sure i am, but if your trying to use my age as a way to discredit my opinion i could also say your just a dinosaur or a fossil. all techs do different jobs and a large variety of jobs having a tool that does more jobs for less coin is how you decide if a tool is worth buying. itd be dumb to defend buying 3 ratchets over one especially since you probably arent using the extended one all the time anyways
@@shaunclancey1107 but it's clear you're part of the red army bro. To each his own. I've never ran into a spot this tool would make me more money than what's already out there. And I've worked on everything from cars to trains to gps guided cranes and CNC equipment.
@ADHD Workshop I use everything matco snap on mostly Mac and I've had issues with some milwaukee stuff for example there sockets were so hard it sheared the corners off my snap on extensions I don't have brand loyalty I just think this is a cost saving tool at least for me who just works on passenger vehicles and some diesels where space is limited and range from some wild sizes and special tools
Not really a good tool for automotive but some other trades good.
Awesome review CP!
📣Woooooooooo!
Thank you kindly
It's still better than a stubby socket stubby doesn't work on nut with a few threads! Think about tons of places Just cause it doesn't work on sparkplugs for u plenty of jobs it will!!
Stick a super stubby socket on the snap on be same width 🤦🏻♂️
just say its not a car repair guy. works for construction tool
your argument on needing extensions is mute because you can still use standard sockets. The point is to be low profile.
Lmao
they have extensions for them. IMO still not a tool you use. cp is right there is a reason why the matco ones are no longer sold have a set and it been used once or twice in the past ten years. a good low pro setup will do better not every bolt and nut has to go on as fast as possible sometimes hand tools are the right call.
Not the Milwaukee they don't