2015-2023 Mustang GT/GT350/GT350R Mishimoto Performance Radiator 3-Row Aluminum Installation
HTML-код
- Опубликовано: 26 июл 2024
- Bill shows you how to install a Mishimoto 3-Row Aluminum Performance Radiator on your 2015-2023 GT, GT350 or GT350R Mustang.
Purchase Product Here:
www.cjponyparts.com/mishimoto...
When you keep a cool engine you're going to maintain the proper performance on your 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, or 2023 GT, GT350 or GT350R Mustang. Mishimoto offers a way to do just that. Enhancing your coolant capacity by one hundred and twenty nine percent over your stock radiator!
Accompanying the radiator is all the required mounting hardware, an already installed rubber trim seal and a magnetic drain plug. This three row aluminum performance radiator is a direct replacement for your factory original and easily install in around two to three hours.
Check out more Mustang Heating & Cooling parts from CJ's here:
www.cjponyparts.com/mustang-ai...
Subscribe to CJ Pony Parts on RUclips here:
ruclips.net/user/subscription_c... 
Авто/Мото
Just done this install on my 2016 GT. Mine is an automatic. Be careful with the transmission cooler as the 2 factory 6mm bolts are a bit too long which came so close to piercing the radiator. Get 2 replacement bolts about 5mm shorter. Also I found it much easier to install the fans on the radiator then install the whole lot into the car. Just tie some hoses away for clearance then all good. The biggest pain in the arse was hooking up the air conditioning condenser to the radiator. After all that it's happy days. Hope this helps out. Good work Bill👍
Paul Gunovich how much coolant did it take to fill up?
@@adrieleckart3509 I used about 12 litres of coolant. Also if you have an automatic transmission, the cooler is secured by 2 6mm bolts on one side whilst on the opposite side it just sits within a bracket. This needs to be secured with some rubber or something similar to keep it from rubbing on the radiator cooling fins. All in all the install went well, cheers
thanks Bill. You have the best install vids.
Nice straight forward install!!
Guess whos back! Back again! Bill is back! Tell a friend!
Thank you for this video! I have to replace the Fan Assembly. I was scared to do it and now I see how easy it is.
Perfect👌🏾
How much coolant Needs after radiator drain ?
I have an issue with installing AC condenser on radiator brackets on the left. Pipes coming out from AC condenser are not allowing to aline radiator bracket.
For whipple 2.9L can we use this instead of buying a heat exchanger?
Is this the same size as the factory non performance pack? Will it work with the hellion street sleeper turbo kit intercooler?
Tim Andrews I believe itsjust6 is running a twin turbo kit like hellion but a hellhorse kit with this radiator setup on a gt350
If I were to change the radiator to a high horse power radiator before the engine mods will the radiator adjust to the heat once the engine mods are done or would I have flash the ECU again after the engine mod.
I need help with my 2015 Eco boost 2.3 mustang
Vacuum fill cooling system best way don't have to run it to get air out. Besides exactly way factory does it too.
pdmustgt d agreed but most do it yourself owners won’t have the tool
Is that intake AIRAID the best one ?
From what I’ve seen, the best CAI is the JLT, and makes on average 10-12 hp more than the AIRAID. The Steeda also seems good, but it isn’t as proven.
Can you replace the fan only? Without taking the radiator off?
I never tried but it looks like there would be enough room.
CJ Pony Parts awesome thank you!
I ever here about eco boost 2.3 turbo mustang 2015 premium to make it 400-600 horsepower
Description says 15-21 but in the video you said 15-16 I have a 17 auto 5.0 will this work ?
We did the video in 2016, it will fit up to 2021 so yes it will fit your 2017.
Does it fit roush stage 3 cars ?
Get rid of the music!