Furitek Olympus Bouncer! SCX24 Ryft?!
HTML-код
- Опубликовано: 17 сен 2024
- Finally got the Olympus together and took it for a rip! This thing is a BLAST!
***If you’re looking for someone to give an honest review and honest opinion on a new product or just need someone to test it to the max contact me at
2fastmattracing@gmail.com
BUILD SPECIFIC LINKS BELOW
Furitek Olympus cage available here
furitek.com/pr...
Furitek Godzilla Motor and Rocketman Transmission found here
bit.ly/3HlSwl5
Furitek Lizard Pro here
bit.ly/39jhrtc
Oil Filled Carisma shocks MSA-1E found here
bit.ly/33j9kde
Hobbyplus CR24 shocks found here
bit.ly/3Hn4RFL
Tires found here
amzn.to/39kM9Cd
Phone Clamp I’m using here (will need GoPro style adapters and phone clamp also)
amzn.to/3mMLooy
HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Amainhobbies affiliate link
bit.ly/3CcTUCN
Amazon affiliate link
amzn.to/3aY2lK7
RCAWD
Don’t forget to use the DISCOUNT CODES BELOW
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora Crawl Master
www.injora.com...
Power Hobby Trail Warriors found here
www.powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
Proline Hyrax found here
bit.ly/35umXXv
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/i...
SHOCKS I USE BELOW
FRONT SHOCKS
Injora internal spring shocks (40mm) running on the gray Injora body truck found here
amzn.to/3LR4yDH
amzn.to/3Qgszri
REAR SHOCKS I usually use some sort of long travel shock like these
bit.ly/33j9kde
WHEEL HEX AND WEIGHTS I USE BELOW
Treal +5mm hex extenders found here
amzn.to/3aR7uDs
Fullsendrc wheel weights here (Treal type b & Rc4wd stamped steel)
fullsendrc.com...
OVERDRIVE GEARS I USE FOUND HERE
www.amazon.com...
MY FAVORITE WHEELS BELOW
Treal 1.0 22.4g beadlocks found here (select your color)
amzn.to/3OdTimH
Injora 1.0 wheels found here
amzn.to/3aS4zL5
Hard Park Crawlers 1.0 wheels
hardparkrc.com...
BRASS PARTS I USE BELOW
Treal Brass Steering Knuckles found here
amzn.to/3MYMQit
Injora brass wheel rings
amzn.to/3xom4Kp
Injora brass kit including steering links!
amzn.to/3MKOKmr
Cheap Brass Kit with all parts I change found here
amzn.to/3zGoOW6
HIGH CLEARANCE LINKS HERE
Injora links (select your length)
amzn.to/3zsUTkm
STEERING LINKS HERE
Injora Aluminum Steering links here
amzn.to/39hOzlb
My favorite chassis available here
Hard Park Crawlers Goblin XL chassis here
hardparkrc.com...
MofoRC Ugly AF chassis found here
www.moforc.com...
TRANSMITTERS I USE BELOW
Flysky Noble here
amzn.to/3OcdhCc
Flysky GT5 here (great budget transmitter)
amzn.to/3mJFTqJ
Flysky g7p here
amzn.to/3xKGaQD
Flysky micro receiver I’m using here
www.ebay.com/i...
Scx24 Bronco found here
Bronco available here
bit.ly/3LQBduc
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~
Definitely go with powder coating. It gives it a much more "realistic" look. I did mine just for the video but glad I did😅.
Really cool seeing it being driven like a bouncer rather then a crawler.
That looks awesome Matt! Only thing I hate about those cages is the electronics bouncing around in them. Probably the best looking micro bouncer around though!
Powder Coat!!!! NOOOOOOOO!!!!! Love the anodized purple!!!! But that's my inner 80's mountain biker voice! LOL!
Yeah dude, that is sweet love the color. Appreciate your sharing I’m waiting on There monster truck got the blue one from CCXRC
So did I! Should be here this wk I guess.
That thing is so sick!
Great video, Those Injora tires are a perfect size. Awesome rig! Bravo brother, can't wait to see more of this rig.
Breathtaking crawling spot and video .
That's my idea of a bad ass bouncer and allot of fun !
I hear ya about the heat! Was actually thinking the heat would shut my phone down if I went out to film a run! Hate the color choices of this chassis, but love the look. Nice overview of it!
Matt, do you have any info on your GT-5 phone holder?
Yeah I’m gonna pull mine apart at some point and powder it. I had 2 phones out with me and they both shut down at one point lol
@@bcochener I’ll try to find the pieces for ya. I just made it with some different phone holders and clamps lol
@@bcochener here’s the main ingredient. I clamp this on the controller base. Then adapt a phone holder off of that with some GoPro fittings and phone clamp
amzn.to/3mMLooy
@@2fmrc Thanks! The clamping mechanism is what I have been struggling with. This looks perfect! Cheers!
Really cool ! And crazy hot , it's like 100 out today too
This is so beautiful I love love the rock bouncer
Awesome rig! Looks like it is a LOT of fun. The purple is a great look!
Prototypes are quick and dirty, so the welds aren't surprising. You wouldn't want to waste time and money making them Gucci. Something that small would be TIG welded in a purge tent. And has to be super clean.
Would you mind getting a caliper measurement of the cage tubes(rod) diameter?
I would LOVE one of those!!!
The tubes are 2mm on my calipers. I’m definitely used to getting the dirty ugly looking prototypes. Just making sure everyone else knows that’s probably not how they are being produced lol
@@2fmrc Yep. Pointing that out is good as people these days like to jump on the whine wagon real fast! LOL!
awesome crawling spot! hope youre staying hydrated :)
This is a absolute banger! Only makes me want to start my prerunner build even more!
Pretty cool looking bouncer 👍
Super awesome place & video Matt! Sweet new rig too! Just epic my man!
What a build!!
Also quite jealous you have such a nice spot so close to home :D
For the size those are totally badass, can't wait to get one. Thanks for posting!!
Hitting like before even watching! Thanks for the video so soon after I asked about it! 🤣
I try lol. Thanks for the like!
Very cool! Lot’s of torque! 👍🏻🍻
Definitely going to build one thanks for the motivation love ur videos
I wish they would make some cheaper versions in aluminum or steel even, i would almost feel bad bashing that beautiful thing. Love it
I kove that chassis. I just switched my buggy to the injora nylon buggy and absolutely love it. I was running the aluminum buggy ans it was awesome but too heavy. I have same set up but i run 4ws and the new 68mm super sticky tires there off rhe hook. She will bounce up anything.
What pinion are you using with the Godzilla??
I believe it’s a 12t
That 1/24 Bouncer rocks!
That thing sick I’m probably gonna build one
Fantastic video and spot!
I hope you used bug repellent.. see all this mosquitoes flying. Nice video cute Little Rock bouncer. Hobby wing 1/18 esc and brushless Hobby wing motor with furytek motor mount would be cheaper option?
Yeah I definitely always spray before heading down there lol. That would definitely be a cheaper option. Or even one of the cheapo systems I’m running in my monster truck would work well I’d say. It’s not quite as smooth.
Yes nothing smooth as furytek, but for fast rock bouncer 1/24 maybe? Thanks nice video good to see you’re outside testing them! Cheers!
How long are the shocks you are running? That is a little ripper! I may have to build one
Matt, what did you use for your battery tray? I started building one for a friend last night. There isn't any hardware for mounting anything.
What foams were you running? I v-notched the foams in the 62’s and it helped them a lot. Still would pro’ly make a bouncer bounce too much, but they crawl pretty darn well when I’ve taken it out, especially on the gladiator. Thanks for a great video, Matt! Great to see your face!
Actually just the stock foams the way they came. I may try cutting them also. Or run a smaller foam. Just a little firm and I even have them vented. The face is what happened to the camera. Broke it! 😆
@@2fmrc
Aaahahaha! The foams are really firm. I’d like to see how they did with a softer/smaller foam or some slime balls or something. I know I put the NHX brass wheels and between the weight/being so narrow, the lugs just folded over and lost grip, crawling anyway. Btw, rim width is something I just started thinking about and how that effects these tires. Now I have to go back and try a few with the ddp’s I have coming in.
@@2fmrc
Are you using the stock foam in the injora 58’s?
@@texomarc yeah I install all of them with stock foams first to test. Then I’ll sometimes cut or go smaller
@@2fmrc
This is the first time I didn’t run the stock foams and I regret it. Still doing good but the cut foams were trash and the ones I’m running are a little too soft/small. Grip nice and take bumps super smooth but sacrificed stability and incline due to grip flip. Dangit! Thanks! Hope you have a great night.
I absolutely love it and even a little jealous.. Great job man
Nice. I have been wanting to build the gold one with all purple stuff on it.
Great video that rig is well done
Thanks!
Very nice 👍👍👍
Hey Matt, That things is awsome i wanna build something similar but do you know if the Furitek Godzilla Motor and Rocketman Transmission with work on an Ugly AG Chassis as i remember hearing somewhere that you may have issues fitting bushless into the Chassis? Or is that for the original wider Komodo where you would have issues? Cheers!
Loved watching this lil ripper running around. Thanks for sharing! I just bought a built brushless deadbolt. It's got brass knuckles/wheel weight/weighted wheels. I was considering getting some high clearance links for it, but don't know if I should get brass ones or aluminum. Is it possible to go too heavy with these little things? This one has the lizard v1 and the surpass motor.
Need one of these! What chassis did you use as a base for your build?
Started with Scx24 parts and the Furitek Olympus cage. It now has the fcx24 axles which run much quicker that they Scx24 axles with worm gears.
NICE...
Sick looking rig! What length shocks are on there?
What length of links did you use for your build? This looks so much fun.
What did you use for the floor pan? I'm trying to use the treal skid plate and it's not working
Mine has a stock skid
I hate that these injora tires were a let down they look sick but just lack the grip
Yeah they aren’t as good as the crawler masters imo. I just love the look of these so much I wanted to use them lol
@@2fmrc I love the way they look also I just vented mine with leather punch and trimmed the foams hope it helps some
OH MY GOD YOU'RE NOT JUST FLOATING HANDS
😆 I just try to keep you guys from seeing my ugly mug as much as possible!
Excellent video.
Thanks!
Awesome rig! I could use a little advice on my setup (apparently I suck at searching) I have the Bronco hardbody with Micro Komodo 3450KV brushless motor and Lizard pro ESC. Everything else is stock. The thing is definitely still slow as crap....without getting too crazy, what can I do to get some decent speed out of this thing? Don't really want to change the trans out and prefer not having to go with a bigger motor (or too much bigger, already had to hack a bit to get the micro komodo in). Gearing suggestions? or will I really need to contemplate a trans/motor swap?
First thing I would try is get the 2/13 overdrive gears for front and rear. That should help some. If that’s not enough maybe look at swapping the pinion.
No the first thing if you want speed is simply slap a 3s battery in there and then you can go for the overdrive and yadda yadda. I am running an injora buggy stretched links gladiator rear dead bolt front with 4mm wide 4ws with 30% overdrive oh and the biggest pinion gear that would fit my Godzilla motor rocket man trans lizard pro all on 3s and I'll tell you right now the largest increase of all the upgrades was the 3s .Huge 68mm super sticky tires with lots of brass and metal axles however I was running the metal injora and as soon as I switched to the nylon buggy less weight and I put smallest spring it was awesome. You will snap dog bones every run if not careful. Set end points very narrow. I am gonna try the new cvc axles shaft then I really want to dump the worm gear for some fcx24 axles or something like that. My rig is a MF Beast and will do flips pop wheelies and climb anything but all that torque and speed breaks something every run. Also if you get metal parts use lock tight with that speed you'll lose bolts often. Party on my 24er gang!
I really want to use this chasis in my first build, but I have the Komodo on the way, so it wouldn't really be a bouncer. Is there a way to raise the CG a bit to make this more of a crawler?
Oh yeah. This thing actually crawls really well the way I have it now so I’m sure it would be a great crawler if set up for that.
@@2fmrc Awesome! I think I'll pull the trigger on it then. Thanks for the reply man!
@@jstriker90 anytime! Don’t forget to use the discount code 2fmrc if going through Furitek! Save ya some cash!
@@2fmrc Good looking out!
Can you run a stock skid plate or do you need special furitek skid? Thanks
You can run a stock skid. No issues
@@2fmrc thank you Amazon here I come!
Hello from southeast alaska how's your day going bro
Good so far! Yours?
@@2fmrc good just got back from walking to the post office to check see what kinda upgrades I got in today for scx24s. Got some good stuff sofar
What transmission skid is the motor and transmission mounted to and is it flipped?
Looking to build something similar. Is there any you would change now given new stuff out?
Honestly if I was building one now I would go with the Furitek Hiroyama for a bouncer. It’s based off a build I did with this truck but using fcx24 axles which runs so much better. It comes artr so the hard part of sorting parts and building is over lol. It also has the new mini Rocketman. I have a video on it as well. Definitely worth checking out. I highly recommend the scx24 transmission with fcx24 axles though. You don’t get the resistance you have with the worm gears of the scx24 axles so it runs much better.
@@2fmrc I wondered. Is there anything you would add/change with that kit? Keep both shocks? Something lower and more bouncer than crawler…. Not wanting a monster truck feel.
@@clint_thayer it’s pretty good like it is. You could always do some oil shocks and it would probably be even better. Tire choice changes up a lot of the feel on these small bouncers I think also.
@@2fmrc thank you and merry Christmas
@@2fmrc one last question… is there a difference in the cages between the Olympus/digger/hiro?
What wheel base is it?
🥰🤩💥💯👍👏
Would have been better if it was not $100
No doubt!
and like most rc videos it is unwatchable because of the awful edm sound track
😆 I rarely ever use music but some of the audio was lost on this one so I hated to just have nothing. Then I’d have people complaining about dead silence. Can’t win but I try 🤷🏻♂️ No matter what someone will always complain. I just keep moving!
Really cool ! And crazy hot , it's like 100 out today too