I think they are well designed and constructed. Poor maintenance is what leads to the problems you see in this video. The filters are supposed to be cleaned @ certain intervals but because they are hidden they are neglected until the machine breaks down 😂.
@@green-crocs-fixes1520 I can believe that. I vacuum my filters every couple of weeks. It keeps the appliance working at optimum & I really look after my stuff try to keep it like new. I love learning how to maintain things properly too.... it's a great video with tedious parts speeded up in just right places. I watched one where the guy filmed removing all the transit bolts in real time. I skimmed along the video. Your's are very well filmed and edited with perfect commentary. You are a great teacher. 🙂
Ready excellent run through how to access the workings of the dryer. I can start on mine. Two pointe, no mention of the screws being hex headed. No list of diagnostic settings, but 5 * anyway.
pink stuff is great. I used the cream to quickly remove 2 clash marks on new plastic casing on my dehumidifier/ air purifier. I tried everything but only the pink stuff cream removed them in seconds.
Hi. My Elektrolux dryer heats but does not cool. The problem is that the laundry is hot and the water tank is empty. The compressor gets very hot. I would be grateful for a hint
Hi; Very eell job, eell done 👍👍 ı got reservoir fault problem, the reservoir lamp is on even it is empty. I realized that the hot water doesnt go to reservoir, i opened the under filter and it was there. Could you pleade point me an idea? Thank you
Hi HollanData, sounds like an issue with the Pump, possibly a blockage or malfunction. Check the Red and Clear popes are not blocked.You can see these at 5:20. Otherwise remove the Pump as it is probably clogged up. Regards.
Hi again, İ willl try to clean this red pope as you did, first i will start the test mode and mode 3, than put pink thing to clear. İ will trey this first time :) wish me good luck. Do i need to pay attention anything in thisnprocess?
Great video, our AEG tumble dryer is also not drying properly and we clean and vacuum the filters very often. Is it also an option to blow through the condensor with compressed air?
I have an Electrolux dryer that is not heating properly. I see the heating unit of the condensor (those metal plates) are lined with lint. Can I clean it the same way as you do on the unit in your video?
Hi Amirthaa, you can try Vacuuming the lint with your Hoover with the brush attachment when the unit is dry. My method is not recommend and only executed as this machine had been heavily not maintained and discarded. Regards.
Hi i have heatpump dryer and its not condensing not collecting any water gets warm in drum compressor is working evaporator isnt getting cold anything i can do to get it working all filters and evaporator fins are clean too, could do with some help thanks
@@green-crocs-fixes1520same problem here. If the moister sensor was faulty, and the compressor is running. Than the copper tubing should get hot and other side cold anyway right? Here it stays all same temp and compressor motor gets over 60deg.
@@arthurganz Hi Arthur, no the motor unit got warm because of the heat from the Condenser sent to it, but because it was not spinning hot air was not blown into the Drum, initially I was not aware of this until I removed the Motor assembly and visibly saw that it was not turning.
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
You would think these dryers would be constructed so as not to allow all that build up inside. Thank you for showing us this.
I think they are well designed and constructed. Poor maintenance is what leads to the problems you see in this video. The filters are supposed to be cleaned @ certain intervals but because they are hidden they are neglected until the machine breaks down 😂.
@@green-crocs-fixes1520 I can believe that. I vacuum my filters every couple of weeks. It keeps the appliance working at optimum & I really look after my stuff try to keep it like new. I love learning how to maintain things properly too.... it's a great video with tedious parts speeded up in just right places. I watched one where the guy filmed removing all the transit bolts in real time. I skimmed along the video. Your's are very well filmed and edited with perfect commentary. You are a great teacher. 🙂
@@FLOSSYTREADWELL flattered, thanks 🙏🏿
Ready excellent run through how to access the workings of the dryer. I can start on mine. Two pointe, no mention of the screws being hex headed. No list of diagnostic settings, but 5 * anyway.
Thanks John,
the screw are Torx head and the Test Mode was is a method I obtained from another RUclipsr 😎.
pink stuff is great. I used the cream to quickly remove 2 clash marks on new plastic casing on my dehumidifier/ air purifier. I tried everything but only the pink stuff cream removed them in seconds.
Totally agree Janet,
Pink Stuff is an odd name for an excellent household cleaner.
BLOODY GOOD JOB!!
Thanks Janet 😀.
great job sir.. thank you
Thanks Mehmet,
happy to help 😀.
Hi. My Elektrolux dryer heats but does not cool. The problem is that the laundry is hot and the water tank is empty. The compressor gets very hot. I would be grateful for a hint
Hi Maciej,
sounds like a blockage in the Pump or it’s Pipes, also a major build up of Lint/Fluff within the Condenser unit will obstruct the drainage.
Hi;
Very eell job, eell done 👍👍
ı got reservoir fault problem, the reservoir lamp is on even it is empty. I realized that the hot water doesnt go to reservoir, i opened the under filter and it was there. Could you pleade point me an idea?
Thank you
Hi HollanData,
sounds like an issue with the Pump, possibly a blockage or malfunction. Check the Red and Clear popes are not blocked.You can see these at 5:20. Otherwise remove the Pump as it is probably clogged up.
Regards.
@@green-crocs-fixes1520 thank you 🙏
@@hollandata Thanks,
happy to help 😀.
Hi again,
İ willl try to clean this red pope as you did, first i will start the test mode and mode 3, than put pink thing to clear.
İ will trey this first time :) wish me good luck.
Do i need to pay attention anything in thisnprocess?
thank you for your video.
Thanks Tiger,
happy to help 😀
Great video, our AEG tumble dryer is also not drying properly and we clean and vacuum the filters very often.
Is it also an option to blow through the condensor with compressed air?
Hi Bostel,
yes try cleaning with compressed air.
i the unit warm to the touch at the back where the Fan is located ?
@@green-crocs-fixes1520 I didn't check the temperature of the back side of the machine yet.
@@Bostel83 OK suggest letting it run for about 15 minutes then check. Could be the Dan not spinning due to a Capacitor 😀.
Hope that's not the wife's best tea towels..
Just a couple of cleanings clothes (ex tea towels) used to test the machine Janet 😀.
I have an Electrolux dryer that is not heating properly. I see the heating unit of the condensor (those metal plates) are lined with lint. Can I clean it the same way as you do on the unit in your video?
Hi Amirthaa,
you can try Vacuuming the lint with your Hoover with the brush attachment when the unit is dry. My method is not recommend and only executed as this machine had been heavily not maintained and discarded.
Regards.
Hi i have heatpump dryer and its not condensing not collecting any water gets warm in drum compressor is working evaporator isnt getting cold anything i can do to get it working all filters and evaporator fins are clean too, could do with some help thanks
Hi Mohammed,
possibly a Moisture Sensor or the unit may require a Gas refill.
@green-crocs-fixes1520 thanks
@@green-crocs-fixes1520same problem here. If the moister sensor was faulty, and the compressor is running. Than the copper tubing should get hot and other side cold anyway right? Here it stays all same temp and compressor motor gets over 60deg.
@@arthurganz Hi Arthur,
no the motor unit got warm because of the heat from the Condenser sent to it, but because it was not spinning hot air was not blown into the Drum, initially I was not aware of this until I removed the Motor assembly and visibly saw that it was not turning.
Can u give me an idea, why my dryer machine does not complete the cycle? Only spin for a second, then stop(finished)
Hi Alan,
if you place the machine into test mode ( see; 22:47 ) this should display an error code which should point you toward the error.
Regards 😀.
Hi Alan,
maybe your Motors stop/start Capacitor
Like like like!! Thanks
Thanks H 😎.
👍👍👍
Thanks Jony 😎.