were you ableto install 'python-dev' , because i cant and i says that the packages replace it: python-dav-is-python3. So do i need to replace 'python-dev' with 'python-dav-is-python3' or something else?
Guys heres some notes to make: 1. It MIGHT work after unplugging hdmi cable, highly unlikely to because hdmi cable is a form of dev/input/ event so basically once you unplug it, it wilk work, but if you are running a robot and you run the script on startup, the events will be different and thus it wont work 2. Raspberry pi doesnt have an on/off button and needs an sd card, just reminder, unless its raspi 5, but that one can only shut down and switch on and not turn off fully 3. A lot of the commands are outdated or need sudo, if commands dont work use sudo in front, if deprecated follow the new command, and python2.7 should be swapped to python3 more than likely since this video is outdated 4. I forgot to mention, any mouses or keyboards or cables plugged in raspberry pi count as events so that can mess with your script, i dont know work arounds beside using the command to see the events and trial and error 5. GREAT VIDEO 🙏 6. (Optional) Try to use a headless setup if possible
I'm a noob but I figured I'd give my thoughts. if you find the inputs for your controller you should be able to have your py script take those inputs from the controller to an if statement that would utilize the GPIO pins on the pi to make robot go brrr
Thank you, really helpful video. I want to set up 2 SNES type controllers for 2 player pong game. How will this work for the 2nd controller, will it get its own unique values or will I need to reference the event() before the controller value?
I was following along fine until I started using python. I got a no module named evdev import error. Please Help! Also I just realized I have python 3.7 not 2. How do i get python 2 working?
I made it work for python 3 by installing it with pip3 (pip3 install evdev) then, I also got the "no module" error, which I solved by making python's path variable point towards it like this: import sys sys.path.append('/home/pi/.local/lib/python3.7/site-packages/') if your directory is something else you'd change it inside the brackets accordingly.
Great video. So straight forward. I have only just started to work on my project (Meccanum drive robot) I'll be using a xbox 360 controller, my 8bitdo NESPro30 does not want to connect no matter what I do. You mentioned button holding. Are you planning to make a second video about that or possible the other input types? Ideally I want to use the joysticks for navigation with my project.
hey Sam, I'm following your tutorial with a Raspberry pi Zero W, I want to connect a generic PS3 controller but it turns out that when I hit the Bluetooth scan my raspberry disconnects me from ssh session
awesome tutorial! thanks! I used this to get an xbox one s controller reading into python on an RPI3 perfectly. Now Im just wondering if there is a way to handle the controller going to sleep (event 40) from within that for loop...as is, this causes the program to crash... any suggestions? thanks!
Thank you! it was a really good explanation. I'm a beginner so I'm happy to find a tutorial easy to understand like this one.
Hands down the best tutorial out there, easy and straight to the point. Thanks
were you ableto install 'python-dev' , because i cant and i says that the packages replace it: python-dav-is-python3. So do i need to replace 'python-dev' with 'python-dav-is-python3' or something else?
This looks like exactly what I've been looking for...trying to control a robot over wifi and this looks like the missing link and simpler then PyGame.
thanks for the info, had to make a few modifications for my joystick, but pretty straightforward.
Guys heres some notes to make:
1. It MIGHT work after unplugging hdmi cable, highly unlikely to because hdmi cable is a form of dev/input/ event so basically once you unplug it, it wilk work, but if you are running a robot and you run the script on startup, the events will be different and thus it wont work
2. Raspberry pi doesnt have an on/off button and needs an sd card, just reminder, unless its raspi 5, but that one can only shut down and switch on and not turn off fully
3. A lot of the commands are outdated or need sudo, if commands dont work use sudo in front, if deprecated follow the new command, and python2.7 should be swapped to python3 more than likely since this video is outdated
4. I forgot to mention, any mouses or keyboards or cables plugged in raspberry pi count as events so that can mess with your script, i dont know work arounds beside using the command to see the events and trial and error
5. GREAT VIDEO 🙏
6. (Optional) Try to use a headless setup if possible
I like the video, respect from Albania
Thank you for the instructions. For me it helped me to read PS5 controller
Excellent starter Tutorial got hot with PI and Python
Very useful! Thank you very much!
i got with codes of btns .. but with the axes control i cant. can u post a python code to read axes buttons? tks
How do you do it with thumb sticks on the controller?
Hi, I was wondering if this script would work with a PS3 controller and pi, and if so how to use the inputs in writing a program for a robot? Thans
I'm a noob but I figured I'd give my thoughts. if you find the inputs for your controller you should be able to have your py script take those inputs from the controller to an if statement that would utilize the GPIO pins on the pi to make robot go brrr
Thank you, really helpful video. I want to set up 2 SNES type controllers for 2 player pong game. How will this work for the 2nd controller, will it get its own unique values or will I need to reference the event() before the controller value?
I was following along fine until I started using python. I got a no module named evdev import error. Please Help! Also I just realized I have python 3.7 not 2. How do i get python 2 working?
I made it work for python 3 by installing it with pip3 (pip3 install evdev) then,
I also got the "no module" error, which I solved by making python's path variable point towards it like this:
import sys
sys.path.append('/home/pi/.local/lib/python3.7/site-packages/')
if your directory is something else you'd change it inside the brackets accordingly.
@@jojojorisjhjosef Ohhh god, you help me a lot. thanks for the answer really help me
damn good tutorial thanks very much man
thank you
Cannot get the hold info. Should it event.value == 2? My gamepad didn't get it. Does any anyone know why?
My controller (8bitdo sf30) won't show up as an even in ls /dev/inputs. plz help
what do i change if i want to hold down the buttons on the 8bitdo?
Thanks! How to control rpi gpios via android like bluetooth controller?
Hey can we use ssh to use joystick ?
Great video. So straight forward. I have only just started to work on my project (Meccanum drive robot) I'll be using a xbox 360 controller, my 8bitdo NESPro30 does not want to connect no matter what I do.
You mentioned button holding. Are you planning to make a second video about that or possible the other input types? Ideally I want to use the joysticks for navigation with my project.
What if you want to make your pi discoverable by other devices like iOS or Android? Is it even possible?
Beauty. Thank you for this tutorial.
Thanks a lot
Happy to help
hey Sam, I'm following your tutorial with a Raspberry pi Zero W, I want to connect a generic PS3 controller but it turns out that when I hit the Bluetooth scan my raspberry disconnects me from ssh session
Thank you for the video! Good explanation! I shall try to connect the PS3 controller to my RPi :3
did this work for your ps3 controller?
can this work on mac?
awesome tutorial! thanks!
I used this to get an xbox one s controller reading into python on an RPI3 perfectly. Now Im just wondering if there is a way to handle the controller going to sleep (event 40) from within that for loop...as is, this causes the program to crash...
any suggestions?
thanks!
so where's the follow up explaining which values to use and how to write the script to test the motor control?
Oh this is a movie from 2017, ok no problem, is this usable with Pygame?
Hi hi.
[bluetooth]# power on
Failed to set power on: org.bluez.Error.Blocked
I checked the net, didnt find any solution, any idea?
I had the same problem. Use the command "sudo rfkill unblock bluetooth" , then do "sudo bluetoothctl" , "power on".
Alfred Cornflake help it’s not working
If i unplug it from the monitor
1. Will it still work?
2. When i recconect the device, will it run the code again? Prob not
If you run the code and you unplug the Pi from a display it should all keep running
@@Core-Electronics alright I'll make sure to auto run the code whenever the pi is rebooted thanks
No one will ever reply to this but how do we know which one is the controller?
I think you just need to do what he did at 5:50
Turn it on and off.
Does it work for python 3?