Welcome to RUclips. I have several Taurus revolvers as well as S&W, Colt, Ruger and others. I'm 74 retired Army NCO and I have been shooting and accumulating guns my entire life. My Taurus revolvers run from 22LR/22WMR to 454 Casul. For years my EDC was a Taurus 85CH (DAO) 357 magnum I loaded with 38 Spl 158 gr Semi Wadcutter Hollow Point +Ps. I have always been satisfied with my Taurus revolvers. Are they equal to S&W in fit and finish? No. But for me they have been serviceable and dependable. Keep posting and I will keep viewing.
Doug, Thank you for the warm welcome. All my comments have been very complimentary and encouraging. While this is my first Taurus, I too collect and shoot many handguns. When I do carry the Taurus, as I mentioned in the video, I use 125 gr jacketed hollow points in 357. I am not sensitive to recoil and 125 gr shouldn't over penetrate. I can tell you are not sensitive to recoil either. The 454 Casull was a dead giveaway! It is still winter here in Wisconsin. I don't feel like shooting a video in the snow. Spring is coming soon. I am looking for suggestions for the next video. Any suggestions?
I started out with Taurus guns when I got serious about guns. I have not been disappointed with any of mine. I have since gone on to get a Rugar 380 and Walther as well. I love my 605.
Very nice, comprehensive review. I will be acquiring a Taurus 605/3", as I have carried an 856/2" for many years. Very reliable! Thanks. T.S. Pennsylvania
@@ths414 When you decide to buy check with 702 Lab there in PA. I have had good experience with them. Am down here in Texas. I also use gubroker, and have came away with some steals lol. Got a Rossi 44 magnum rifle for 500 and it was in my local sporting goods store for 730. Good luck with your purchase. One thing I must tell you at times you will need to check the screws on your gun to make sure they are not getting lose. I found that problem with my snubby when I had one.
Bought the same gun for the exact same reasons. Was hiking with my family a few weeks ago and had a run-in with a large black bear. Wanted something cheap, stainless, and with sufficient knock down power. Chose the 3inch barrel because there's too much velocity drop off on the snub. I'll have to look into some hard cast ammo.
You will not be disappointed with the revolver! The Buffalo Bore 180 gr flat nose hard cast seems to be the proper medicine. This is from my research; I haven't used it on any game. Unfortunately, I couldn't find any on the shelves. I had to purchase directly from Buffalo Bore $$. If the coupon for the laser grip was in the box, I highly suggest you get it. Hard to pass up for the price. I like the third finger tactical activation.
Thank you, Jesse. I love 357's, but mine and my wife's were all 6" barrels. I needed something handier. I had a 2" and it was too loud and a flame thrower, (powder burned outside the barrel), I sold it. Now that was a short barrel. The three inch has a better sight radius than I thought. The laser grips removed any issue. I don't think it to be too deceptive, but I did take the best of two strings. However, The Buffalo Bore was only one string. I didn't want to do that a second time. I am not that sensitive to recoil, but it was powerful. The recoil slammed the cylinder release latch into my thumb, hence the bandage on my thumb after that string. I thought I cleaned the revolver well. but I kept finding blood in the checkering on the latch. I even used the weave stance and grip, push slightly with your dominant hand and pull slightly with your off hand. This helps reduce muzzle jump. Thanks again Jesse, stay safe.
I`ve never owned a Taurus, but was looking at the 605 as my first, because I`m looking for a 357 Magnum. I currently own mostly S&W and Ruger, from 38, 9mm, & 44 Magnum. I`ve never owned a 357. After watching your video, I`m gonna give this Taurus a try. Thanks.
Bryan, you won't be disappointed. I bought my first and only, (so far), despite many negative reviews. Actually, I was surprised how inaccurate the reviews were. I was pleasantly surprised with its quality for < $400, (I got it wrong in my video, S/B < $400 not, < $300). The inaccurate reviews are what prompted me to do this video review. I am not affiliated with Taurus.
Bought mine today, the taurus felt alot better then the Smith in the same size and barrel length... don't sleep on the brand ive owned a 4" Taurus and it was my favorite revolver
I looked at one of these today at the gun shop. This particular model had a matte black finish and a standard blackout front sight. The list price was 369. It was also drilled and tapped for a Red Dot optics plate. You're a video has got me thinking I should probably go back and pick it up. Thanks for a very informative video.
You will be pleasantly surprised like I was! FYI - I misspoke in the video. I paid < $400, (not < $300), for the SS / tritium sight model and that was a year ago. I recall the black models were a little less money. But, with one year of Bidenomics, yours is a good price. My brother gave me a Vortex Venom he didn't need, (what a brother!). I don't need it either. I'm selling it and the proceeds will go to my brother. I'm asking a mere $125 + shipping. Check out the web site link. vortexoptics.com/vortex-venom-red-dot+reticle-3~MOA~Dot
A lot of you tube videos are made by those don't speak clearly, ramble about almost anything & leave out important info - I have a Taurus 656 defender ordered in .38 spl 3" & was very pleased to see your video: clear, concise & no off-the-subject gibberish. On one other review the guy was even cleaning his during the review!
Alfred, I concur. I am a man of few words. It surprised me the video was 15 minutes. That's very long for me. Your 656 is a good choice too. Six rounds in the same cylinder diameter as my 5 shot 357. Did you find a good holster? Is the laser grip coupon still offered? If so, do get it. You mentioned cleaning. I just got some Flitz bore cleaner. Do get some also. The barrel will be spotless. Added plus, if your 656 is SS it will remove the cylinder ring easily. Any suggestions for my second video?
Thank you, Tom for an excellent post! I just bought this Taurus and found your info very helpful...clear, concise, and very good explanation and demonstration!
@@NotAllEngineersAreBoring Haven't looked for a holster yet. The one you have looks good. I've had my taurus for a week and haven't fired it yet, so I'm ready to go to the range!
Great job Tom. Very informative and well presented. Thanks so much for your efforts and attention to detail. The video production was clean and well produced. Thanks!
Thank you, James Bond. I did take the best of two strings. However, the Buffalo Bore I only took one string. I didn't want to subject that to myself twice. I did play it down in the video, but it is a powerful load! On my grip of the gun, I push slightly with the dominant hand and pull slightly with the offhand. This helps with recoil and muzzle jump. The cylinder latch still bit my thumb, hence the bandage.
The credit goes to Jack Weaver. With help from Jeff Cooper. www.thearmorylife.com/ayoob-how-to-shoot-a-pistol-using-the-classic-weaver-stance/ @@Sandhill1988
I'm considering buying one of these, and I really appreciate the end of your video where you addressed some of the complaints other RUclips reviews have mentioned.
I too heard those complaints. But I wanted an affordable trail gun. I figured how bad could it be? After all S&W use to own Taurus and they share a lot of design traits. I said, "damn the torpedo's" and I bought it anyways right before a wilderness camping and fishing trip to northern Wisconsin that has an ample black bear population. After the purchase and test firing, I didn't know what some of those reviews were talking about. This is what prompted me to make my first, (and only so far), video. To set the story straight and speak my truth. I have no connection to Taurus other than owning one revolver. Is it as good as my 1990's Python or my wife's 1990's King Cobra? No, but at a fraction of the cost, it is a fantastic value. Plus, I wouldn't want to bring those Colt's into the wild. Why are you interested in the 605 Taurus? Trail gun, self-defense, both? I believe you will be pleasantly surprised.
@@NotAllEngineersAreBoring I'm in an urban area, so no trails but definitely plenty of need for a CCW. So, that'd be my main purpose for it. I was thinking about getting a Rock Island M200 or M206 and was really close to buying but saw another video that mentioned the 605 and it really addresses some of the things I didn't like about the RIA guns for only $100 more (mainly the poor sights and it not being officially rated for 38 +p ammo). Problem I'm having now is I can't find the one I want in stock at any of my local gun stores haha
@@DrJonez I'm not familiar with the M200 but it looks good to me. 3" may be hard to conceal, 2" VERY loud report and poor velocity. A revolver is bulky to conceal. I like 357's. I don't shoot 38's. Taurus has a 38 that holds 6 rounds and the same cylinder diameter as the 605. Me, I would take 5) 357's over 6) 38's. your choice. I would be remiss if I didn't suggest a semi auto. Much easier to conceal, fast reloads.
@@NotAllEngineersAreBoring I'm surprised to hear you say it's hard to conceal considering how much smaller the 605 is compared to a full size 357. Sure you can get an even smaller autoloader but I've seen reviews where guys are easily pocket carrying this thing (with a pocket holster) and it seems to fit comfortably. I'm a big guy so I have plenty of room to hide it haha
@@NotAllEngineersAreBoring I do plan on getting a semi auto carry pistol at some point but right now I'm looking for a budget gun to get me started. I feel more comfortable buying a budget revolver than I do a budget autoloader, if that makes sense?
Just bought a used one, i assume the person sold it to the gun shop because the double action is quite stiff. I looked on the net for like 5 minutes befor i found a company selling the spring set to reduce the double action for 17 bucks plus shipping. And found a site for the rubber grips as well. I feel the money will be well spent.
My double action settled in at 10#, single action 4-1/2#, (one year of shooting). As I said, the spring kit gave me too many clicks instead of bangs, (Wolff Springs). Some ammo had thinner primers and worked, but my reloads resulted in too many clicks. I shoot mainly reloads except for personal defense and trail gun defense. The single and double action was better, but not worth the clicks. I only kept the trigger return spring in the Taurus. You may find a round that works with the spring kit, just stick to it. Other rounds.....? The Taurus grips I LOVE. They also accept the speed loader. Some do not. See if yours does, (if that is important to you). I'm curious, keep me informed.
@@NotAllEngineersAreBoring I was unaware of light strikes with different springs. I don't really have anything set in stone at this point, the gun store where I live in Montana will be quite busy until hunting season is over, so I have time to run ammo through my 605 and see how I do with it. Practice has it's advantages. Pretty sure I'll have a lot of trigger pull at first.
I am tempted to suggest the 856, (38 special only). It has one extra round, (6), and the same width, (cylinder Dia.), of 1.4" as the 605. Womans fingerprints are more acidic than men, I recommend stainless steel, tungsten or Cerakote coated aluminum to avoid rusted fingerprints. The 856 has some snazzy color choices too. www.taurususa.com/revolvers/small-frame-revolvers/taurus-856 But I do like the versatility of the 605, 38 or 357. I would suggest practicing with 38's and depending on her tolerance for recoil maybe even for the carry round. www.taurususa.com/revolvers/small-frame-revolvers/taurus-605 The added performance of a 3" vs 2" barrel made my choice easy. Two inch is easier to carry, (purse etc.) but less performance and much much louder muzzle blast. Tougher choice for you. If the Viridian laser grip coupon is still in the box, (even if it isn't), I recommend getting it. Point and shoot is very advantageous in a high stress situation. Purchase the grips through Taurus, less than half the cost at the Viridian web site. I do not recommend the T.O.R.O. red dot sight. Too hard and slow to find that damn dot. Even with practice it is hard to find. Red dot sights are large and a snag hazard when drawing the revolver. shoptaurus.com/shop-by-model/revolvers/small-frame-revolvers/viridian-red-laser-grip-blk I am not affiliated with Taurus; I just believe they are a great value. Let me know what you end up choosing for her. I would be remiss if I didn't suggest a pistol. Small, less weight, thinner, faster reloads. My wife enjoys her Sig Sauer P238, (380 ACP). www.sigsauer.com/p238-two-tone-micro-compact.html It also comes in 9mm, P938. I have the P938. www.sigsauer.com/p938-two-tone-micro-compact.html I don't see any 380ACP Taurus'. They do have small 9mm's. I am not familiar with their pistol line. The revolver is very intuitive, anyone knows how to shoot it. Single action semi auto pistols need a little more practice. Tom Reply
Very nice comprehensive review Tom. I appreciate the fact that you addressed some of the concerns that have been voiced by others in their reviews. BTW: Nice groups.
I saw those other reviews too. But I wanted a trail gun for the Wisconsin north woods. So, for < $400 I figured how bad could it be? I purchased it anyways and was pleasantly surprised! This was my motivation for the video. Do you plan on buying a Taurus? I don't think I fibbed too much, but I did two strings and showed the best of the two. The exception was the Buffalo Bore, I didn't want to do that again! Any suggestions for a next video? It just snowed 4" here in Wisconsin but soon it will be spring. I didn't want to shoot a video in our winter.
@@NotAllEngineersAreBoring I am familiar with the forests of northern Wisconsin and recognize the value of a trail gun. A .357 should be adequate to the task. I sailed Superior out of Bayfield for many years and stumbled upon black bears on the Apostle Islands more than once. Never felt like I was in eminent peril, but I didn't waste any time back tracking out of those situations. Yes, I have been considering buying a Taurus 605 and have been a little conflicted about 2" or 3" barrels. You make a good argument for the 3" barrel, but the 2" barrel would be easier to pocket, and I don't plan on facing down a bear any time soon. I'm also looking at the 856 if you have one around to do a video about. As a pocket carry self-defense option .38S hollow points look like they would do the job. I pocket carry a P238 at the moment but have never been overly confident in its reliability or punch. The 856 is a little cheaper and is a six shooter so that is a plus. .38S should be a soft shooter and I'd likely carry the 605 with .38S anyhow so I am conflicted. Nice to have options. I saw that it has been snowing up that way. We have a daughter in Minnesota. We moved south just last year to get out of that crap. Seventy and sunny in South Carolina today.
If you are going to shoot 38's anyways, I agree, the 856 gives you one extra shot with the same cylinder diameter of the 5 shot 605. Just as easy to conceal with 1 more shot. 2" or 3" would depend on how you intend to carry. You mentioned "pocket", 3" doesn't pocket well. I carry a P938, my wife enjoys the P238. Both are very reliable, (I'm almost sure you mean stopping power). I understand carrying is not supposed to be "comfortable". It is to be "comforting". That P238 will be much more comfortable than the 856, and almost as comforting. The 380 isn't too far off from a 38. Check out the Liberty Ammunition 380 Civil Defense for that P238. My wife likes shooting it. She feels it is comforting.
@@NotAllEngineersAreBoring I carry Underwood 68GR. xtreme defender in the 238. Saw some great ballistics testing on it. I think Liberty makes something just like it. They look like a Phillips #2 screwdriver and don't expand. They penetrate though and make a significant wound cavity. The 238 is very easy/comfortable to carry in a DeSantis Nemesis pocket holster. Comforting is a good way to put it as well. I don't need a wheel gun so much as I want another one. I suppose you know how that is. Traded my S&W 642 on something a few years ago in a fit of stupidity. The Taurus offerings seem to be solid affordable options when held side by side with the 642.
Nice shooting! I have the 2" version & it's been 100% reliable. You may want to use some blue Loctite for the screw on the right side, just above the trigger guard, as it likes to back itself out after a lot of shooting.
It certainly is! I agree. Keep in mind the 605 can handle not only 357, (for the trail gun aspect), but 38+P too! I call that "versatility". I reload, and I make 38+P rounds in a 357 case. My wife really likes that round as well.
@@NotAllEngineersAreBoring I have a 3" barrel 605 now. I had a snubby that i got rid of. I love Taurus guns, and have a 608,66, 327, 44 mag and a tx. I recently retired so I have been spending more time at the range. I did subscribe to your channel. Great stuff you have brother.
Thank you for the kind words. I am impressed, ALL the comments are just as kind. Not one negative. If the laser grip coupon is still shipped in the box, consider getting it. I enjoy mine a lot. I used the revolver on several Wisconsin north woods back country adventures with a large black bear population. Although I didn't have to use it, it is very comforting to have. Enjoy
Thank you, Steve. It just so happened I got a complimentary comment yesterday and they went on about the spring kit he just purchased and can't wait to get it. I reminded him about light primer strikes and he may need to find ammo, (primers), that works and stick to it. He never heard that before. Guess he only watched part of the video. :)
Thank you, Mary. It's winter here in Wisconsin, so it may be a couple more months. I learned a lot on this first video, next one should be better. Any topics you're interested in?
Even thou I havent shot mine yet. I had a wollf spring kit adjusted to it. When its in single action. The hammer moves forward partially and hold❗❓ I don't know if this is normal from the gun. But ill have it checked out before I do shoot the gun.
Check the location of the main spring and where it engages the hammer. My Wollf kit had to many light primer strikes. I only left the Wollf trigger return spring in the revolver. I removed the Wollf main spring.
The Wollf main spring caused light primer strikes. Put the original back in and no more light strikes. The trigger return spring had no ill effects. Minimal benefit but I already bought it so I left it in. Your hammer issue could be improper placement of the upper part of the main spring arm??
I noticed at the 5:45 mark of the video, the grips changed from the original to aftermarket grips. What grips are those and where did you get them from?
Awesome review. Loved it. I want one or one of the 856, eventually. Hey for my spouse - definitely not a gun person and medium sized hands, I saw Taurus used to make a 380 revolver. What do you think about this option as opposed to a 22 or 22 mag? Just don’t think she will enjoy 38 and want a simple system. Thanks.
Mike, Thank you for the kind words. If for protection I would not recommend a rimfire, very underpowered, (even the magnum), and not reliable. If plinking 22LR, ammo is cheaper than the magnum. There are some low recoil 38's that should be fine. A low recoil self-defense in 38 is liberty ammunition's Civil Defense. It's a light for caliber bullet traveling fast. Most any 38 ammo should have very manageable recoil. If your spouse won't be shooting 357, I would recommend the 856. Six rounds in the same cylinder diameter as the five round 605. They also have some snazzy color options. If for protection 2" or 3" is a tough call. 2" carries well, purse etc. But large muzzle flash, very loud blast, and less performance. You need to weight the options. Heavier gun, stainless steel etc. will reduce felt recoil. The light weight aluminum or titanium will be a pleasure to carry. I would suggest the Viridian laser grip. Point and shoot. Purchase through Taurus not Viridian, 1/2 the cost through Taurus. I would not recommend the T.O.R.O. red dot sight. Hard to find that damn dot, and a snag hazard during the draw. Let me know what you end up with. Again, I am not affiliated with Taurus or anyone else, I just like this stuff.
Ok, I do have a chronograph. Stay tuned. Hopefully you don’t need to see the Buffalo Bore 180 gr. Hard cast. I may have down played it. I am still cleaning blood out of the cylinder latch. It bit me bad under recoil. I didn’t mind the recoil. But the latch to the thumb was bad. I may de-horn the latch lever if I plan to shoot more of these. 😅
1sr video using some top notch videography …Good work sir, you and I are definitely on the same page our believe in Taurus quality for a great price all day long…I own a few “9”
I just bought one. It's the all black with the full grip. Yet it cost me $428 overall. That's with the tax. I bought it as a simple commute carry and camping/trail gun as well.
I mis-spoke in the video. S/B < $400, pretax and background check. That was a year ago. So, with a year of Bidenomics, you got a fair price. I'm certain you will enjoy. Let me know what holster you find.
Thank you, Larry, it is holding up very well. This past summer, I took it with me on several wilderness camping and fishing trip in the great north woods of Wisconsin. A health black bear population. I did not see any, but it was comforting to have on my hip. I had several shooting range trips. I shoot only 357's, I am not sensitive to recoiled, (except that Buffalo Bore 180 gr hard cast was punishing). It shoots well. The trigger is smoothening out some, but double action is still a 10 # pull. My expectation is a low-cost trail gun. It meets that expectation and satisfies a few more, Conceal carry, plinker, etc. Again, Thank you for the kind words.
@@NotAllEngineersAreBoring you’re most welcome! I enjoyed the review and I definitely appreciate the update! Is it one you would recommend to someone else for a woods & trail revolver?
@@larryduttry9400 Larry, I'm not affiliated with Taurus or anyone else. With that said, heck ya, I'd recommend it as a woods / trail gun. I wouldn't want to pack my Gen 1 Colt Python in 357. Too nice of a revolver. This low-cost revolver fits my needs perfectly. Being SS it can take on the weather. Being 3" it shoots well with 357 cartridges and has power. 3" also facilitates comfortable carry and holstering. Shoot 38 specials for plinking. Let me know if and which revolver you get.
Bought one today with intentions of using it for EDC, paid $419 retail which might have been a little too much, ive owned a Model 66 and this feels so much better then the 66 already
Lo siento mucho! Typo in my video, cost S/B < $400, not $300. So your cost is about right. The < $400 was a year ago. Enjoy! For the price, consider the laser if they still have a discounted cost.
@NotAllEngineersAreBoring yeah they had the laser version, my big hands blocked it so I opted out for a standard one with Pachmeier grips... still awesome nonetheless
Thank you for the words of encouragement Frank. I know you will be happy with it. FYI - I just notice an error in my video. My cost 10 months ago was just under $400, (not
The one I got is no longer on the market, and I had to cut down the strap and move the buckle. I did ask Taurus USA they sent me this link..... shoptaurus.com/holsters/?_bc_fsnf=1&brand=15
I enjoyed your video very much and I have seen the videos that question the reliability of the 605 and felt there was something wrong. Thank you for clearing it up. It's definitely on my list for another wheel gun. Keep up the videos. Ps how do you like the red dot on the hand grip?
Thank You for the kind words, John. I am blessed with all the comments being very favorable. Not a single negative remark. For @ $ 400 it is well worth it. (Note - error in the video, I said less than $300, should be less than $ 400 and that was a year ago. I'm certain Bidenomics raised the cost). I figured for $400 I'll get it, no big deal if it sucks. I am pleasantly surprised with the purchase. I guess you can't believe all the RUclipsrs. I got to use it last month for a two-week wilderness camping and fishing trip in northern Wisconsin. A healthy black bear and wolf population. I didn't need to use it for defense, but it was comforting to have. It was also fun to plink with, maybe that scared off the critters. I plinked with 125 gr hollow points. The 180 gr Buffalo Bore is expensive and not fun to shoot. I am not sensitive to recoil at all. But I did downplay the recoil, it caught me off guard. It was nasty! This is my first and only video, (to date). I enjoyed doing it. I also enjoy replying to these comments. I'm retired. Any suggestions for my second video? Really, I need ideas. I have been shooting for over 50 years. Mostly plinking, then Trap, Sporting clays, Duck, goose, grouse, big game, Masters class in unlimited IPSSC, pen pal with Col Jeff, (Dean), Cooper prior to email, (used snail mail), I share my affection of the 1911 with Jeff Cooper, I have three of em. There was a coupon in the box for the red laser grip. For @ $100, it is well worth it. I loved the original grips, they fit my hand perfectly. The laser grips are almost as good, a little larger that some prefer. I prefer the visibility of the green laser, (3x the $). However, green is more sensitive to cold weather. It may not function in cold climates like Wisconsin. Red is more forgiving. After all it's a low-cost trail gun, (seconds as a self-defense gun). Having the laser on the grip is not a concern. It does not interfere with my draw, my finger does not block the laser, I am pleased. The offset is not appreciable for a revolver like this. Still accurate enough. Really, Give me your thoughts for a second video.
@NotAllEngineersAreBoring Hi Tom I still have my two Originals I bought when I was 21 over 40 years ago S&W 27 6-in and an S&W 39 and would like to give the 27 a break because of old age that's why I was looking to add new 357. Back in the day, I had a few matches at Camp Perry rifle match using 220 swift. Don't ask how I did. 😆 For myself I like the type of Mythbusters format showing one point of view to the next like in your first video. Patience, it will come to you. Good Luck.
I reached out to Taurus and got a link to their store, no holster for our revolver! I found something on Etsy for a mere $38. I gave it a shot at that price. It was OK, but the snap strap was too long. I could buckle it and pull the revolver out of the holster, effectively no retention. It does have a clip for OWB or a loop for IWB. I am handy with leatherwork. I cut down the strap, burnished the cut edge and installed a, (supposedly), heavy duty snap buckle. The leather is thicker than the crimp prong on the snap. I had to get creative on the attachment with pop rivets. It works but the snap is a little weak. I keep looking for a heavier duty snap. If you go this route, let me know if you find a decent snap. Here is a link to what I found..... www.etsy.com/listing/683243642/revolver-taurus-series-357mag38spl?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=taurus+revolver+holster+3%26quot%3B&ref=sc_gallery-1-1&search_preloaded_img=1&plkey=ae64dad6e679aae7bd5b1b9442cd02719675c6bd%3A683243642 I am not that familiar with S&W. Maybe there is a holster that also fits the Taurus? Let me know what you end up doing.
@@NotAllEngineersAreBoring thanks for the info! I currently run with a ruger holster that’s only made for a 2” barrel. Was wondering if there was anything better out there.
Thanks for the words of encouragement. I try to respond quicker, but, you know….., the holidays. Concerning the 605, 3” as a carry option, at the risk of stating the obvious. I will list my Pro’s and Con’s of this revolver for CC. Pro’s 1) A 357 is the gold standard for a defensive handgun. I my opinion, non-better. 2) Five shot cylinder has a smaller diameter, (1.4”), than a six shot, Making concealment easier than a six shot. If you need more than 5 shots, you may have bitten off more than you should have. 3) Extremely reliable. Not like a semi-auto where you need to be certain rounds feed consistently, no limp wrists etc. 4) Easy for anyone to shoot. Most anyone knows how to fire a revolver. A child knows how to shoot this. However, you will keep this safe from little inquisitive hands. 5) Three inch barrel is by far a better choice than a 2”. So much better performance. A 2” blasts too much, ear damaging noise, and velocity suffers too. Con’s 1) I had a very hard time finding a holster. Let me know what you find. I don't know, are we suppose to put the 3" in a snub nose holster? 2) Much wider width than a semi auto. Less comfort and concealability. The 605 will be very comforting, (not necessarily comfortable). 3) Much longer to reload than a semi auto with a magazine. For the 605 I have both a speed loader and a speed strip for extra rounds. Let me know what you end up with or any other question.
Very good video. I've been looking at these and you have us great information. Haven't found any as inexpensive as you did here in IL. Would you recommend 357 mag., hard case for brown bear as well as black bear? Would you take this to Montana?
Thank you for the words of encouragement. I learned a lot doing this first video. Being winter here in Wisconsin, my next one will have to wait until spring. I know a guy in Fon Du Lac, WI, Tom's Military Arms and Guns. He charges Cost plus $20 for pistols. So now you know how much profit your seller is making. I purchased it May 2023, so price shouldn't have gone up much. We only have Black bear here in WI. There are practically no black bear attacks here. Having this sure make me feel at ease cleaning fish at the campsite. Heavy, 180gr, Hard Cast, Flat point, should do the job. Note - I haven't shot a bear with it. My research and hunting experience suggests this would be just the medicine needed for Black Bear. It will definitely penetrate the skull or reach vital organs. As far as Montana goes, you couldn't have too much gun. I would still bring Bear Spray. 357 with this load may be about minimum. I would feel better with a 44 Mag, and a 4" barrel. I would feel even better with a rifle, even a lever action 44 Mag. Walk loud, carry a Wisconsin cow bell when you hike. Let em know you're coming. Stay safe. Let me know what you decide.
@NotAllEngineersAreBoring Thank you! We were in Montana and Wyoming last July. I carried Bear Spray wherever I went. We never saw any bears, but a woman was killed by a brown Bear on a trail not too far from where we were. Thanks!!
This is my only "budget" revolver. I do have a cheap revolver a NAA 22 / 22 mag but those are RUclipsd to death. I appreciate the note. I need help! It's winter here in Wisconsin. Snow won't melt till April, so we have time to think about it. Any interest in a Sig Sauer P210 Target. Super sweet shooter. Hard to miss with the trigger and action.
@@NotAllEngineersAreBoring Yeah, if you're looking to get noticed on RUclips I'd just make as many videos as you can with what arsenal that you have. A Sig not named p365 hasn't been done to death, and that's interesting -- but honestly, I'd do the videos which have been done to death as well. Good luck to ya!
Thank you, Mike. I did this just for fun and to set the record straight for some negative channels about the 605. Like I said, I was pleasantly surprised at the value. I wanted a low-cost trail gun. I just came back from a wilderness camping and fishing trip in northern Wisconsin. There is a good population of Black Bears. I wore this revolver and was very comforted. Any suggestions on what I should do for my second video?
Great first video. Congrats. I’ve owned a Ruger security six in the old days. I wasn’t good enough with the short barrel but always thought the 3” was a good carry gun. I have other 4” and 6” revolvers but your video convinced me to try one of these. I just placed my order with a local gun shop. Thank you again.
I had a Ruger Security 6 with a 2" barrel too. Wow, the flame and report was awsome. You sure needed ear protection. With 5 round capacity the cylinder diameter is reasonable to conceal. So far, I like the 10 o'clock cross draw position for a holster. Works when I'm seated in a car too.
@@NotAllEngineersAreBoring I purchased the 3” barrel around Christmas. I have not been able to get to the range yet. It looks and feels good. The cylinder and trigger have a good rotation and action. I may need to change the grips. They feel a little small but I won’t do anything until putting a box or two of 38’s through it.
Was there a coupon for the laser grips in the box? The laser grips are slightly larger than the stock grips. The cost for the laser grips was fantastic, hard to say "NO". I wanted a low-cost trail gun, but the red laser cost was too good to pass up. well worth the extra bill. Note - I like the visibility / brightness of the green laser, but they do have a drawback beside cost. They stop functioning in Wisconsin cold winters. Red handles the cold better.
Bruce, I concur. The only reason I didn't, (yet?), is I wanted a low-cost trail gun. Didn't want to spend approximately half the cost of the revolver on a trigger / action job. Did you have this work done? Are you happy with it? Do you know the trigger weight after? No creep? Any light primer strikes? Cost and who did it?
Never looked. I'm not sure you can have a moon clip in 357? I did get speed strips and a speed loader. www.amazon.com/gp/product/B0B4GRD5V1/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 www.amazon.com/gp/product/B0000C1CLL/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I'm getting up there in age. My eyesight isn't what it used to be. Laser or red dot sure makes it easier to acquire the target. I just have a slight difficulty finding that red dot with the red dot sight. I believe with enough practice I could improve my ability to find it. With no ammunition in the gun or even the room, practice drawing the revolver and acquire the target.
I reload, so most of my shooting is reloaded. I also have a 357 lever action to fire in both I use 158 JHP, 13.1 Grain 2400, or 140 FMJ, 13.5 Grain 2400, or 125 FMJ, 15.3 Grain 2400. For target and my wife's favorite I load 148 Plated Hollow Base WC, 4.3 Grain HP38. I don't like to use reloads for self-defense, I mainly use just about any 125 gr jacketed hollow point. For trail carry, I use that buffalo bore 180 gr flat nose. It is a very heavy recoil though! I don't shoot 38's as I can reload light 357's.
@NotAllEngineersAreBoring Thank you for responding. For a 2 inch and 3inch 357MAG, you could go with a low recoil or lower energy 357MAG or even a low energy cowboy load 357MAG. What do you think. I would go heavier than 110grs.
If for self-defense go for a full load. You need to stop the threat quickly. If you're sensitive to recoil or target shooting, tame it down. I always push slightly with my dominant hand and pull slightly with my off hand. This helps minimize muzzle jump and gets your sights back on target.
I got to hold one, it felt small light with a small grip. I opted for the Tracker 4" ported medium frame Instead. Glad I made that choice and just didn't buy this thing online somewhere.
As I said, 3" has a lot better ballistics. Two inch is borderline pocketable. The 3" is a bit to long for a pocket. Both are fine for IWB holsters. But I wanted a trail gun. After owning it for over a year, I still like it for my purpose. I did pack it on several wilderness fishing trips in northern Wisconsin with a healthy black bear population. I didn't have to use it for the bears, but it was comforting to have. It is a fun plinker too.
@@NotAllEngineersAreBoring I think you made a good choice as far as barrel length in .357. I have an 856 and 605 with 2" barrels, wish the 605 was a 3", but the Defender series was not out when I bought it.
@@wes326 You get an extra round with the 856 and it has the same thickness at 1.4", (cylinder diameter). The 856 is pocketable. The 3" is just a bit to long for a pocket. Requires a holster.
Yes, always trade-offs. Larger cylinder diameter could turn off some purchasers. Less capacity does also. I only have black bear here in Wisconsin. Five will be sufficient.
Call me old fashion. I was pen pals with Col. Jeff Cooper, (pre-internet, we used snail mail). Then I met Jeff at Gunsite when he taught there. The original definitions were, double action meant two types of actions, 1) finger cock and 2) thumb cock. If you could only use the thumb cock that was a single action. If you could only use the finger cock, that was single action too. This could be misinterpreted so "finger cock only" was used. "Double action only" was non-sensical. These were Jeff Cooper's definition also. I understand over the years it no longer has that meaning. I doubt Jeff Cooper would have accepted it, But I accept it. However, I still use Finger or Thumb cock. I keep true to the original definition, and everyone knows what I am talking about. Glad to hear customer service is OK. I didn't have to use it. What Taurus do you have and why did you need customer service?
I use the 605 as a trail gun. I mostly plink with it. I never needed to shoot an animal with it, (yet). My CCW guns are all semi-auto, large capacity and quick reloading. I use these for the same reason you mentioned above. I believe Tauras did this to keep handgun width down for concealability. The 605 has five rounds of 357's at a cylinder diameter of 1.4". The 656 has six rounds of 38's at the same 1.4" diameter cylinder. In my opinion, I prefer five 357's over six 38's.
Call me old fashion. I was pen pals with Lt. Col. Jeff Cooper, (pre-internet, we used snail mail). Then I met Jeff at Gunsite when he taught there. The original definitions were, double action meant two types of actions, 1) finger cock and 2) thumb cock. If you could only use the thumb cock that was a single action. If you could only use the finger cock, that was single action too. This could be misinterpreted so "finger cock only" was used. "Double action only" was non-sensical. These were Jeff Cooper's definition also. I understand over the years it no longer has that meaning. I doubt Jeff Cooper would have accepted it, But I accept it. However, I still use Finger or Thumb cock. I keep true to the original definition, and everyone knows what I am talking about.
Its made to shoot 38special or 357 mag and u are saying to be careful when shooting 38 special or 357 because it might bind up?? With all do respect sir: U MAKE NO SENSE!!
If you shoot a lot of 38's, a carbon ring can form in the cylinder. Since a 38 is slightly shorter, when a 357 is chambered in the cylinder the ring is over the brass case. When fired, it can make the case difficult to eject. Hope this clears it up for you.
I am amazed. This is my first, (and, so far only), video. I have not had ANY criticism. So, your constructive criticism is very welcomed. I do want to make more, but only for the fun of it. Thank you. Also, I don't want to be a boring engineer. I was a bit nervous. That's my only excuse. Stay tuned!
He sure did say "TRITIUM VIAL". Not bad for a budget revolver. Tritium or hydrogen-3 gas has a half-life of 12.5 years. Being a gas is why a glass vial is used to contain the tritium. I have some sights that are @30 years old, and they sure don't seem to be half or 1/4 as bright. Seem near as bright as newer sights. Note - He usually doesn't talk in third person. 🤣
Like I said, it was "stout". But I'm not that sensitive to recoil. I use the Weaver stance and push slightly with my dominant hand and pull slightly with my off hand. Really helps with the muzzle jump and felt recoil.
BTW - The cylinder latch did bite my thumb from the recoil of the Buffalo Bore 180 gr. maybe around the third shot. I sucked it up and continued the volley. I didn't want to re-film it.
@NotAllEngineersAreBoring screw in butt stock stuck out the other side about a quarter inch, had to beg to get something done. Two weeks later they aren't email saying package on its way, I said package for what, finally after days told me they sent screws, took three weeks.
@@WoodysbackOh, so you're just impatient and think you're their only customer. You're crying about 3 weeks? Pathetic, trade in your guns and get your nails done and change your name to KAREN.
![Taurus 605 Revolver review [Big Power, Small Package]](http://i.ytimg.com/vi/pnOR89nSXMI/mqdefault.jpg)
Welcome to RUclips. I have several Taurus revolvers as well as S&W, Colt, Ruger and others. I'm 74 retired Army NCO and I have been shooting and accumulating guns my entire life. My Taurus revolvers run from 22LR/22WMR to 454 Casul. For years my EDC was a Taurus 85CH (DAO) 357 magnum I loaded with 38 Spl 158 gr Semi Wadcutter Hollow Point +Ps. I have always been satisfied with my Taurus revolvers. Are they equal to S&W in fit and finish? No. But for me they have been serviceable and dependable. Keep posting and I will keep viewing.
Doug, Thank you for the warm welcome. All my comments have been very complimentary and encouraging. While this is my first Taurus, I too collect and shoot many handguns. When I do carry the Taurus, as I mentioned in the video, I use 125 gr jacketed hollow points in 357. I am not sensitive to recoil and 125 gr shouldn't over penetrate. I can tell you are not sensitive to recoil either. The 454 Casull was a dead giveaway!
It is still winter here in Wisconsin. I don't feel like shooting a video in the snow. Spring is coming soon. I am looking for suggestions for the next video. Any suggestions?
I started out with Taurus guns when I got serious about guns. I have not been disappointed with any of mine. I have since gone on to get a Rugar 380 and Walther as well. I love my 605.
Very nice, comprehensive review. I will be acquiring a Taurus 605/3", as I have carried an 856/2" for many years. Very reliable! Thanks. T.S. Pennsylvania
@@ths414 When you decide to buy check with 702 Lab there in PA. I have had good experience with them. Am down here in Texas. I also use gubroker, and have came away with some steals lol. Got a Rossi 44 magnum rifle for 500 and it was in my local sporting goods store for 730. Good luck with your purchase. One thing I must tell you at times you will need to check the screws on your gun to make sure they are not getting lose. I found that problem with my snubby when I had one.
Bought the same gun for the exact same reasons. Was hiking with my family a few weeks ago and had a run-in with a large black bear. Wanted something cheap, stainless, and with sufficient knock down power. Chose the 3inch barrel because there's too much velocity drop off on the snub. I'll have to look into some hard cast ammo.
You will not be disappointed with the revolver! The Buffalo Bore 180 gr flat nose hard cast seems to be the proper medicine. This is from my research; I haven't used it on any game. Unfortunately, I couldn't find any on the shelves. I had to purchase directly from Buffalo Bore $$. If the coupon for the laser grip was in the box, I highly suggest you get it. Hard to pass up for the price. I like the third finger tactical activation.
You sir are an excellent shot. Im impressed with your accuracy with a short barrel .357 mag
Thank you, Jesse. I love 357's, but mine and my wife's were all 6" barrels. I needed something handier. I had a 2" and it was too loud and a flame thrower, (powder burned outside the barrel), I sold it. Now that was a short barrel. The three inch has a better sight radius than I thought. The laser grips removed any issue. I don't think it to be too deceptive, but I did take the best of two strings. However, The Buffalo Bore was only one string. I didn't want to do that a second time. I am not that sensitive to recoil, but it was powerful. The recoil slammed the cylinder release latch into my thumb, hence the bandage on my thumb after that string. I thought I cleaned the revolver well. but I kept finding blood in the checkering on the latch. I even used the weave stance and grip, push slightly with your dominant hand and pull slightly with your off hand. This helps reduce muzzle jump. Thanks again Jesse, stay safe.
Excellent first-time review I have two Taurus 856 revolvers and both are excellent. No complaints with either. Looking forward to more reviews
Thank you Joe, I learned a lot. my next one should be better?
I`ve never owned a Taurus, but was looking at the 605 as my first, because I`m looking for a 357 Magnum. I currently own mostly S&W and Ruger, from 38, 9mm, & 44 Magnum. I`ve never owned a 357.
After watching your video, I`m gonna give this Taurus a try. Thanks.
Bryan, you won't be disappointed. I bought my first and only, (so far), despite many negative reviews. Actually, I was surprised how inaccurate the reviews were. I was pleasantly surprised with its quality for < $400, (I got it wrong in my video, S/B < $400 not, < $300). The inaccurate reviews are what prompted me to do this video review. I am not affiliated with Taurus.
Bought mine today, the taurus felt alot better then the Smith in the same size and barrel length... don't sleep on the brand ive owned a 4" Taurus and it was my favorite revolver
I looked at one of these today at the gun shop. This particular model had a matte black finish and a standard blackout front sight. The list price was 369. It was also drilled and tapped for a Red Dot optics plate. You're a video has got me thinking I should probably go back and pick it up. Thanks for a very informative video.
You will be pleasantly surprised like I was! FYI - I misspoke in the video. I paid < $400, (not < $300), for the SS / tritium sight model and that was a year ago. I recall the black models were a little less money. But, with one year of Bidenomics, yours is a good price. My brother gave me a Vortex Venom he didn't need, (what a brother!). I don't need it either. I'm selling it and the proceeds will go to my brother. I'm asking a mere $125 + shipping. Check out the web site link. vortexoptics.com/vortex-venom-red-dot+reticle-3~MOA~Dot
A lot of you tube videos are made by those don't speak clearly, ramble about almost anything & leave out important info - I have a Taurus 656 defender ordered in .38 spl 3" & was very pleased to see your video: clear, concise & no off-the-subject gibberish. On one other review the guy was even cleaning his during the review!
Alfred, I concur. I am a man of few words. It surprised me the video was 15 minutes. That's very long for me.
Your 656 is a good choice too. Six rounds in the same cylinder diameter as my 5 shot 357. Did you find a good holster? Is the laser grip coupon still offered? If so, do get it.
You mentioned cleaning. I just got some Flitz bore cleaner. Do get some also. The barrel will be spotless. Added plus, if your 656 is SS it will remove the cylinder ring easily.
Any suggestions for my second video?
Pretty good video would never have known it's your first. I'm looking at the taurus 856 38 special 3 inch barrel. 5:56
Thank you, Tom for an excellent post! I just bought this Taurus and found your info very helpful...clear, concise, and very good explanation and demonstration!
Thank you for the kind words. All of my comments have been very positive.
FYI -
@@NotAllEngineersAreBoring Haven't looked for a holster yet. The one you have looks good. I've had my taurus for a week and haven't fired it yet, so I'm ready to go to the range!
Great job Tom. Very informative and well presented. Thanks so much for your efforts and attention to detail.
The video production was clean and well produced. Thanks!
Thank you, Craig, I am considering a second video. Any suggestion?
A+ video for a first. I agree that a three inch for woods carry is a plus . Especially for a 357.
Thank you for the support. Winter here in Wisconsin. Stay tuned for more come spring.
Your a great shot sir. People don't understand how hard it is to be accurate with the three fifty seven magnum.
Thank you, James Bond. I did take the best of two strings. However, the Buffalo Bore I only took one string. I didn't want to subject that to myself twice. I did play it down in the video, but it is a powerful load! On my grip of the gun, I push slightly with the dominant hand and pull slightly with the offhand. This helps with recoil and muzzle jump. The cylinder latch still bit my thumb, hence the bandage.
@@NotAllEngineersAreBoring Very nice thank you for sharing your technique I'll give it a try.
The credit goes to Jack Weaver. With help from Jeff Cooper. www.thearmorylife.com/ayoob-how-to-shoot-a-pistol-using-the-classic-weaver-stance/ @@Sandhill1988
I'm considering buying one of these, and I really appreciate the end of your video where you addressed some of the complaints other RUclips reviews have mentioned.
I too heard those complaints. But I wanted an affordable trail gun. I figured how bad could it be? After all S&W use to own Taurus and they share a lot of design traits. I said, "damn the torpedo's" and I bought it anyways right before a wilderness camping and fishing trip to northern Wisconsin that has an ample black bear population.
After the purchase and test firing, I didn't know what some of those reviews were talking about. This is what prompted me to make my first, (and only so far), video. To set the story straight and speak my truth. I have no connection to Taurus other than owning one revolver.
Is it as good as my 1990's Python or my wife's 1990's King Cobra? No, but at a fraction of the cost, it is a fantastic value. Plus, I wouldn't want to bring those Colt's into the wild.
Why are you interested in the 605 Taurus? Trail gun, self-defense, both? I believe you will be pleasantly surprised.
@@NotAllEngineersAreBoring I'm in an urban area, so no trails but definitely plenty of need for a CCW. So, that'd be my main purpose for it. I was thinking about getting a Rock Island M200 or M206 and was really close to buying but saw another video that mentioned the 605 and it really addresses some of the things I didn't like about the RIA guns for only $100 more (mainly the poor sights and it not being officially rated for 38 +p ammo). Problem I'm having now is I can't find the one I want in stock at any of my local gun stores haha
@@DrJonez I'm not familiar with the M200 but it looks good to me. 3" may be hard to conceal, 2" VERY loud report and poor velocity. A revolver is bulky to conceal.
I like 357's. I don't shoot 38's. Taurus has a 38 that holds 6 rounds and the same cylinder diameter as the 605. Me, I would take 5) 357's over 6) 38's. your choice.
I would be remiss if I didn't suggest a semi auto. Much easier to conceal, fast reloads.
@@NotAllEngineersAreBoring I'm surprised to hear you say it's hard to conceal considering how much smaller the 605 is compared to a full size 357. Sure you can get an even smaller autoloader but I've seen reviews where guys are easily pocket carrying this thing (with a pocket holster) and it seems to fit comfortably. I'm a big guy so I have plenty of room to hide it haha
@@NotAllEngineersAreBoring I do plan on getting a semi auto carry pistol at some point but right now I'm looking for a budget gun to get me started. I feel more comfortable buying a budget revolver than I do a budget autoloader, if that makes sense?
Just bought a used one, i assume the person sold it to the gun shop because the double action is quite stiff. I looked on the net for like 5 minutes befor i found a company selling the spring set to reduce the double action for 17 bucks plus shipping. And found a site for the rubber grips as well. I feel the money will be well spent.
My double action settled in at 10#, single action 4-1/2#, (one year of shooting). As I said, the spring kit gave me too many clicks instead of bangs, (Wolff Springs). Some ammo had thinner primers and worked, but my reloads resulted in too many clicks. I shoot mainly reloads except for personal defense and trail gun defense. The single and double action was better, but not worth the clicks. I only kept the trigger return spring in the Taurus. You may find a round that works with the spring kit, just stick to it. Other rounds.....?
The Taurus grips I LOVE. They also accept the speed loader. Some do not. See if yours does, (if that is important to you).
I'm curious, keep me informed.
@@NotAllEngineersAreBoring I was unaware of light strikes with different springs. I don't really have anything set in stone at this point, the gun store where I live in Montana will be quite busy until hunting season is over, so I have time to run ammo through my 605 and see how I do with it. Practice has it's advantages. Pretty sure I'll have a lot of trigger pull at first.
Great overview! I’m buying this for my daughter as her first gun and living on her own! Your feedback is appreciated!
I am tempted to suggest the 856, (38 special only). It has one extra round, (6), and the same width, (cylinder Dia.), of 1.4" as the 605. Womans fingerprints are more acidic than men, I recommend stainless steel, tungsten or Cerakote coated aluminum to avoid rusted fingerprints. The 856 has some snazzy color choices too.
www.taurususa.com/revolvers/small-frame-revolvers/taurus-856
But I do like the versatility of the 605, 38 or 357. I would suggest practicing with 38's and depending on her tolerance for recoil maybe even for the carry round.
www.taurususa.com/revolvers/small-frame-revolvers/taurus-605
The added performance of a 3" vs 2" barrel made my choice easy. Two inch is easier to carry, (purse etc.) but less performance and much much louder muzzle blast. Tougher choice for you.
If the Viridian laser grip coupon is still in the box, (even if it isn't), I recommend getting it. Point and shoot is very advantageous in a high stress situation. Purchase the grips through Taurus, less than half the cost at the Viridian web site. I do not recommend the T.O.R.O. red dot sight. Too hard and slow to find that damn dot. Even with practice it is hard to find. Red dot sights are large and a snag hazard when drawing the revolver.
shoptaurus.com/shop-by-model/revolvers/small-frame-revolvers/viridian-red-laser-grip-blk
I am not affiliated with Taurus; I just believe they are a great value. Let me know what you end up choosing for her.
I would be remiss if I didn't suggest a pistol. Small, less weight, thinner, faster reloads. My wife enjoys her Sig Sauer P238, (380 ACP).
www.sigsauer.com/p238-two-tone-micro-compact.html
It also comes in 9mm, P938. I have the P938.
www.sigsauer.com/p938-two-tone-micro-compact.html
I don't see any 380ACP Taurus'. They do have small 9mm's. I am not familiar with their pistol line.
The revolver is very intuitive, anyone knows how to shoot it. Single action semi auto pistols need a little more practice.
Tom
Reply
These are excellent tools 👍
I concur!
Very nice comprehensive review Tom. I appreciate the fact that you addressed some of the concerns that have been voiced by others in their reviews. BTW: Nice groups.
I saw those other reviews too. But I wanted a trail gun for the Wisconsin north woods. So, for < $400 I figured how bad could it be? I purchased it anyways and was pleasantly surprised! This was my motivation for the video. Do you plan on buying a Taurus?
I don't think I fibbed too much, but I did two strings and showed the best of the two. The exception was the Buffalo Bore, I didn't want to do that again!
Any suggestions for a next video? It just snowed 4" here in Wisconsin but soon it will be spring. I didn't want to shoot a video in our winter.
@@NotAllEngineersAreBoring
I am familiar with the forests of northern Wisconsin and recognize the value of a trail gun. A .357 should be adequate to the task. I sailed Superior out of Bayfield for many years and stumbled upon black bears on the Apostle Islands more than once. Never felt like I was in eminent peril, but I didn't waste any time back tracking out of those situations. Yes, I have been considering buying a Taurus 605 and have been a little conflicted about 2" or 3" barrels. You make a good argument for the 3" barrel, but the 2" barrel would be easier to pocket, and I don't plan on facing down a bear any time soon.
I'm also looking at the 856 if you have one around to do a video about. As a pocket carry self-defense option .38S hollow points look like they would do the job. I pocket carry a P238 at the moment but have never been overly confident in its reliability or punch. The 856 is a little cheaper and is a six shooter so that is a plus. .38S should be a soft shooter and I'd likely carry the 605 with .38S anyhow so I am conflicted. Nice to have options.
I saw that it has been snowing up that way. We have a daughter in Minnesota. We moved south just last year to get out of that crap. Seventy and sunny in South Carolina today.
If you are going to shoot 38's anyways, I agree, the 856 gives you one extra shot with the same cylinder diameter of the 5 shot 605. Just as easy to conceal with 1 more shot. 2" or 3" would depend on how you intend to carry. You mentioned "pocket", 3" doesn't pocket well.
I carry a P938, my wife enjoys the P238. Both are very reliable, (I'm almost sure you mean stopping power). I understand carrying is not supposed to be "comfortable". It is to be "comforting". That P238 will be much more comfortable than the 856, and almost as comforting. The 380 isn't too far off from a 38. Check out the Liberty Ammunition 380 Civil Defense for that P238. My wife likes shooting it. She feels it is comforting.
@@NotAllEngineersAreBoring
I carry Underwood 68GR. xtreme defender in the 238. Saw some great ballistics testing on it. I think Liberty makes something just like it. They look like a Phillips #2 screwdriver and don't expand. They penetrate though and make a significant wound cavity. The 238 is very easy/comfortable to carry in a DeSantis Nemesis pocket holster. Comforting is a good way to put it as well. I don't need a wheel gun so much as I want another one. I suppose you know how that is. Traded my S&W 642 on something a few years ago in a fit of stupidity. The Taurus offerings seem to be solid affordable options when held side by side with the 642.
The sight issue was real. It's the reason I didn't buy this model at first. Taurus did fix this, I was happy to see.
Nice shooting! I have the 2" version & it's been 100% reliable. You may want to use some blue Loctite for the screw on the right side, just above the trigger guard, as it likes to back itself out after a lot of shooting.
Barry, Thank you for the heads up.
38 special plus P is a dam good self defence round bro.
It certainly is! I agree. Keep in mind the 605 can handle not only 357, (for the trail gun aspect), but 38+P too! I call that "versatility". I reload, and I make 38+P rounds in a 357 case. My wife really likes that round as well.
158 grain 38 +p lead semi wadcutter hollow points work well!!!!
Nice presentation Sir, keep up the good work.
Thank you, Tony for the kind words. Thinking of getting one?
What should be my next video? I need suggestions.
@@NotAllEngineersAreBoring I have a 3" barrel 605 now. I had a snubby that i got rid of. I love Taurus guns, and have a 608,66, 327, 44 mag and a tx. I recently retired so I have been spending more time at the range. I did subscribe to your channel. Great stuff you have brother.
I enjoyed this video. I just bought this revolver in tungsten cerakote. I enjoyed your review.
Thank you for the kind words. I am impressed, ALL the comments are just as kind. Not one negative. If the laser grip coupon is still shipped in the box, consider getting it. I enjoy mine a lot. I used the revolver on several Wisconsin north woods back country adventures with a large black bear population. Although I didn't have to use it, it is very comforting to have. Enjoy
Good video. I agree about changing the springs. I refuse to change any spring, on any firearm.
Thank you, Steve.
It just so happened I got a complimentary comment yesterday and they went on about the spring kit he just purchased and can't wait to get it. I reminded him about light primer strikes and he may need to find ammo, (primers), that works and stick to it. He never heard that before. Guess he only watched part of the video. :)
Excellent video. Looking forward to your next one! Thank you.
Thank you, Mary. It's winter here in Wisconsin, so it may be a couple more months. I learned a lot on this first video, next one should be better. Any topics you're interested in?
Even thou I havent shot mine yet. I had a wollf spring kit adjusted to it. When its in single action. The hammer moves forward partially and hold❗❓ I don't know if this is normal from the gun. But ill have it checked out before I do shoot the gun.
Check the location of the main spring and where it engages the hammer. My Wollf kit had to many light primer strikes. I only left the Wollf trigger return spring in the revolver. I removed the Wollf main spring.
@@NotAllEngineersAreBoring That work better for your's?
The Wollf main spring caused light primer strikes. Put the original back in and no more light strikes. The trigger return spring had no ill effects. Minimal benefit but I already bought it so I left it in. Your hammer issue could be improper placement of the upper part of the main spring arm??
@@NotAllEngineersAreBoring Thank you, I will have this look @ from a gun Smith.
I noticed at the 5:45 mark of the video, the grips changed from the original to aftermarket grips. What grips are those and where did you get them from?
Awesome review. Loved it. I want one or one of the 856, eventually.
Hey for my spouse - definitely not a gun person and medium sized hands, I saw Taurus used to make a 380 revolver. What do you think about this option as opposed to a 22 or 22 mag? Just don’t think she will enjoy 38 and want a simple system. Thanks.
Mike, Thank you for the kind words.
If for protection I would not recommend a rimfire, very underpowered, (even the magnum), and not reliable. If plinking 22LR, ammo is cheaper than the magnum.
There are some low recoil 38's that should be fine. A low recoil self-defense in 38 is liberty ammunition's Civil Defense. It's a light for caliber bullet traveling fast. Most any 38 ammo should have very manageable recoil.
If your spouse won't be shooting 357, I would recommend the 856. Six rounds in the same cylinder diameter as the five round 605. They also have some snazzy color options.
If for protection 2" or 3" is a tough call. 2" carries well, purse etc. But large muzzle flash, very loud blast, and less performance. You need to weight the options.
Heavier gun, stainless steel etc. will reduce felt recoil. The light weight aluminum or titanium will be a pleasure to carry.
I would suggest the Viridian laser grip. Point and shoot. Purchase through Taurus not Viridian, 1/2 the cost through Taurus. I would not recommend the T.O.R.O. red dot sight. Hard to find that damn dot, and a snag hazard during the draw.
Let me know what you end up with. Again, I am not affiliated with Taurus or anyone else, I just like this stuff.
@ thanks Sir, I appreciate the 38 ammo suggestion and gun advice, something where I’m not sure I’d get the best advice at a gun store.
I'd love to see the ballistic performance of .357 rounds out of that 3" barrel revolver you have there.
I will definitely consider that. I've never made gel. I usually shoot milk jugs. Plastic milk jugs OK? or do you want to see ballistic gel?
@@NotAllEngineersAreBoring I just wanna see the velocities of various .357 rounds coming out of the 3" barrel, if that's OK with you.
Ok, I do have a chronograph. Stay tuned. Hopefully you don’t need to see the Buffalo Bore 180 gr. Hard cast. I may have down played it. I am still cleaning blood out of the cylinder latch. It bit me bad under recoil. I didn’t mind the recoil. But the latch to the thumb was bad. I may de-horn the latch lever if I plan to shoot more of these. 😅
@@TomLindner-n8u No problem, take your time.
I'm impressed with the Taurus 605 3in. 357 Magnum. Great Personal Protection gun
I am certain you will enjoy. Well worth the price. Let me know what holster you end up using.
1sr video using some top notch videography …Good work sir, you and I are definitely on the same page our believe in Taurus quality for a great price all day long…I own a few “9”
Thank you, it was also my first effort with "Win Movie Maker". Very intuitive for the video editing. What do you use?
I just bought one. It's the all black with the full grip. Yet it cost me $428 overall. That's with the tax. I bought it as a simple commute carry and camping/trail gun as well.
I mis-spoke in the video. S/B < $400, pretax and background check. That was a year ago. So, with a year of Bidenomics, you got a fair price. I'm certain you will enjoy. Let me know what holster you find.
Great Job! Looking forward to your channel sir!!!!God Bless!
Thank you, Gregory. Winter here in Wisconsin so it may be a few months before I create another. Any topic you are interested in for the next one?
Excellent video!! After about a year how has the 605 held up? Has the revolver met your expectations?? Again great video!
Thank you, Larry, it is holding up very well. This past summer, I took it with me on several wilderness camping and fishing trip in the great north woods of Wisconsin. A health black bear population. I did not see any, but it was comforting to have on my hip. I had several shooting range trips. I shoot only 357's, I am not sensitive to recoiled, (except that Buffalo Bore 180 gr hard cast was punishing). It shoots well. The trigger is smoothening out some, but double action is still a 10 # pull. My expectation is a low-cost trail gun. It meets that expectation and satisfies a few more, Conceal carry, plinker, etc. Again, Thank you for the kind words.
@@NotAllEngineersAreBoring you’re most welcome! I enjoyed the review and I definitely appreciate the update! Is it one you would recommend to someone else for a woods & trail revolver?
@@larryduttry9400 Larry, I'm not affiliated with Taurus or anyone else. With that said, heck ya, I'd recommend it as a woods / trail gun. I wouldn't want to pack my Gen 1 Colt Python in 357. Too nice of a revolver. This low-cost revolver fits my needs perfectly. Being SS it can take on the weather. Being 3" it shoots well with 357 cartridges and has power. 3" also facilitates comfortable carry and holstering. Shoot 38 specials for plinking. Let me know if and which revolver you get.
Bought one today with intentions of using it for EDC, paid $419 retail which might have been a little too much, ive owned a Model 66 and this feels so much better then the 66 already
Lo siento mucho! Typo in my video, cost S/B < $400, not $300. So your cost is about right. The < $400 was a year ago. Enjoy! For the price, consider the laser if they still have a discounted cost.
@NotAllEngineersAreBoring yeah they had the laser version, my big hands blocked it so I opted out for a standard one with Pachmeier grips... still awesome nonetheless
Thank you, you did a great and informative presentation!
Thank you for the kind words. I learned a lot on this first video. My next one should be better.
Great review I am looking to buy this pistol and enjoyed you review thank you
Thank you for the words of encouragement Frank. I know you will be happy with it.
FYI - I just notice an error in my video. My cost 10 months ago was just under $400, (not
Good video,any specific info on that holster?
The one I got is no longer on the market, and I had to cut down the strap and move the buckle. I did ask Taurus USA they sent me this link.....
shoptaurus.com/holsters/?_bc_fsnf=1&brand=15
I enjoyed your video very much and I have seen the videos that question the reliability of the 605 and felt there was something wrong. Thank you for clearing it up. It's definitely on my list for another wheel gun.
Keep up the videos.
Ps how do you like the red dot on the hand grip?
Thank You for the kind words, John. I am blessed with all the comments being very favorable. Not a single negative remark.
For @ $ 400 it is well worth it. (Note - error in the video, I said less than $300, should be less than $ 400 and that was a year ago. I'm certain Bidenomics raised the cost). I figured for $400 I'll get it, no big deal if it sucks. I am pleasantly surprised with the purchase. I guess you can't believe all the RUclipsrs.
I got to use it last month for a two-week wilderness camping and fishing trip in northern Wisconsin. A healthy black bear and wolf population. I didn't need to use it for defense, but it was comforting to have. It was also fun to plink with, maybe that scared off the critters. I plinked with 125 gr hollow points. The 180 gr Buffalo Bore is expensive and not fun to shoot. I am not sensitive to recoil at all. But I did downplay the recoil, it caught me off guard. It was nasty!
This is my first and only video, (to date). I enjoyed doing it. I also enjoy replying to these comments. I'm retired. Any suggestions for my second video? Really, I need ideas. I have been shooting for over 50 years. Mostly plinking, then Trap, Sporting clays, Duck, goose, grouse, big game, Masters class in unlimited IPSSC, pen pal with Col Jeff, (Dean), Cooper prior to email, (used snail mail), I share my affection of the 1911 with Jeff Cooper, I have three of em.
There was a coupon in the box for the red laser grip. For @ $100, it is well worth it. I loved the original grips, they fit my hand perfectly. The laser grips are almost as good, a little larger that some prefer. I prefer the visibility of the green laser, (3x the $). However, green is more sensitive to cold weather. It may not function in cold climates like Wisconsin. Red is more forgiving. After all it's a low-cost trail gun, (seconds as a self-defense gun). Having the laser on the grip is not a concern. It does not interfere with my draw, my finger does not block the laser, I am pleased. The offset is not appreciable for a revolver like this. Still accurate enough.
Really, Give me your thoughts for a second video.
@NotAllEngineersAreBoring
Hi Tom
I still have my two Originals I bought when I was 21 over 40 years ago S&W 27 6-in and an S&W 39 and would like to give the 27 a break because of old age that's why I was looking to add new 357. Back in the day, I had a few matches at Camp Perry rifle match using 220 swift. Don't ask how I did. 😆
For myself I like the type of Mythbusters format showing one point of view to the next like in your first video.
Patience, it will come to you. Good Luck.
@@johnmigliore79 You will enjoy the Laser.
I have the same gun and the same issue with finding a holster. Do you by chance have a part number for the holster?
I reached out to Taurus and got a link to their store, no holster for our revolver! I found something on Etsy for a mere $38. I gave it a shot at that price. It was OK, but the snap strap was too long. I could buckle it and pull the revolver out of the holster, effectively no retention. It does have a clip for OWB or a loop for IWB. I am handy with leatherwork. I cut down the strap, burnished the cut edge and installed a, (supposedly), heavy duty snap buckle. The leather is thicker than the crimp prong on the snap. I had to get creative on the attachment with pop rivets. It works but the snap is a little weak. I keep looking for a heavier duty snap. If you go this route, let me know if you find a decent snap. Here is a link to what I found.....
www.etsy.com/listing/683243642/revolver-taurus-series-357mag38spl?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=taurus+revolver+holster+3%26quot%3B&ref=sc_gallery-1-1&search_preloaded_img=1&plkey=ae64dad6e679aae7bd5b1b9442cd02719675c6bd%3A683243642
I am not that familiar with S&W. Maybe there is a holster that also fits the Taurus? Let me know what you end up doing.
@@NotAllEngineersAreBoring thanks for the info! I currently run with a ruger holster that’s only made for a 2” barrel. Was wondering if there was anything better out there.
I just gave my search another go at it....
www.craftholsters.com/taurus-605-defender-3-holsters
@@NotAllEngineersAreBoring thanks for the link!
Good first video 👍🏽 , thinking abt getting this as a conceal carry .
Thanks for the words of encouragement. I try to respond quicker, but, you know….., the holidays.
Concerning the 605, 3” as a carry option, at the risk of stating the obvious. I will list my Pro’s and Con’s of this revolver for CC.
Pro’s
1) A 357 is the gold standard for a defensive handgun. I my opinion, non-better.
2) Five shot cylinder has a smaller diameter, (1.4”), than a six shot, Making concealment easier than a six shot. If you need more than 5 shots, you may have bitten off more than you should have.
3) Extremely reliable. Not like a semi-auto where you need to be certain rounds feed consistently, no limp wrists etc.
4) Easy for anyone to shoot. Most anyone knows how to fire a revolver. A child knows how to shoot this. However, you will keep this safe from little inquisitive hands.
5) Three inch barrel is by far a better choice than a 2”. So much better performance. A 2” blasts too much, ear damaging noise, and velocity suffers too.
Con’s
1) I had a very hard time finding a holster. Let me know what you find. I don't know, are we suppose to put the 3" in a snub nose holster?
2) Much wider width than a semi auto. Less comfort and concealability. The 605 will be very comforting, (not necessarily comfortable).
3) Much longer to reload than a semi auto with a magazine. For the 605 I have both a speed loader and a speed strip for extra rounds.
Let me know what you end up with or any other question.
Very good video. I've been looking at these and you have us great information. Haven't found any as inexpensive as you did here in IL. Would you recommend 357 mag., hard case for brown bear as well as black bear? Would you take this to Montana?
Thank you for the words of encouragement. I learned a lot doing this first video. Being winter here in Wisconsin, my next one will have to wait until spring.
I know a guy in Fon Du Lac, WI, Tom's Military Arms and Guns. He charges Cost plus $20 for pistols. So now you know how much profit your seller is making. I purchased it May 2023, so price shouldn't have gone up much.
We only have Black bear here in WI. There are practically no black bear attacks here. Having this sure make me feel at ease cleaning fish at the campsite. Heavy, 180gr, Hard Cast, Flat point, should do the job. Note - I haven't shot a bear with it. My research and hunting experience suggests this would be just the medicine needed for Black Bear. It will definitely penetrate the skull or reach vital organs. As far as Montana goes, you couldn't have too much gun. I would still bring Bear Spray. 357 with this load may be about minimum. I would feel better with a 44 Mag, and a 4" barrel. I would feel even better with a rifle, even a lever action 44 Mag. Walk loud, carry a Wisconsin cow bell when you hike. Let em know you're coming.
Stay safe. Let me know what you decide.
@NotAllEngineersAreBoring Thank you!
We were in Montana and Wyoming last July. I carried Bear Spray wherever I went. We never saw any bears, but a woman was killed by a brown Bear on a trail not too far from where we were. Thanks!!
My BAD! I just noticed, in the video I said' "less than $300". Opps should be less than $400.
Having a hard time finding a good holster (IWB kydex) for the 605 in 3 in. barrel. Any suggestions would be greatly appreciated.
Me too. Taurus sells holsters, but I didn't see one for the laser grip. I have the Veridian laser grip they sold. Let me know if you find one.
Well done and very informative. Thanks for presenting it
Thank you Tom. Any suggestions for my second video?
@@NotAllEngineersAreBoring If you have any more budget revolvers you can do some of those
This is my only "budget" revolver. I do have a cheap revolver a NAA 22 / 22 mag but those are RUclipsd to death. I appreciate the note. I need help! It's winter here in Wisconsin. Snow won't melt till April, so we have time to think about it. Any interest in a Sig Sauer P210 Target. Super sweet shooter. Hard to miss with the trigger and action.
@@NotAllEngineersAreBoring Yeah, if you're looking to get noticed on RUclips I'd just make as many videos as you can with what arsenal that you have.
A Sig not named p365 hasn't been done to death, and that's interesting -- but honestly, I'd do the videos which have been done to death as well. Good luck to ya!
Gracias mi amigo! @@flutebasket4294
How did you find it for less than $300 with a 3 inch barrel? I can't even get a 605 with a 2 inch barrel for that kind of money
OOOps, I purchased it for less than $400, (@ a year ago). My appologies. I'll see if I can edit it.
Very well done review, thank you for sharing !
Thank you, Mike. I did this just for fun and to set the record straight for some negative channels about the 605. Like I said, I was pleasantly surprised at the value. I wanted a low-cost trail gun. I just came back from a wilderness camping and fishing trip in northern Wisconsin. There is a good population of Black Bears. I wore this revolver and was very comforted.
Any suggestions on what I should do for my second video?
Great first video. Congrats.
I’ve owned a Ruger security six in the old days. I wasn’t good enough with the short barrel but always thought the 3” was a good carry gun. I have other 4” and 6” revolvers but your video convinced me to try one of these. I just placed my order with a local gun shop.
Thank you again.
I had a Ruger Security 6 with a 2" barrel too. Wow, the flame and report was awsome. You sure needed ear protection. With 5 round capacity the cylinder diameter is reasonable to conceal. So far, I like the 10 o'clock cross draw position for a holster. Works when I'm seated in a car too.
Did you get it yet? Let me know how you like it.
@@NotAllEngineersAreBoring I purchased the 3” barrel around Christmas. I have not been able to get to the range yet. It looks and feels good. The cylinder and trigger have a good rotation and action. I may need to change the grips. They feel a little small but I won’t do anything until putting a box or two of 38’s through it.
Was there a coupon for the laser grips in the box? The laser grips are slightly larger than the stock grips. The cost for the laser grips was fantastic, hard to say "NO". I wanted a low-cost trail gun, but the red laser cost was too good to pass up. well worth the extra bill. Note - I like the visibility / brightness of the green laser, but they do have a drawback beside cost. They stop functioning in Wisconsin cold winters. Red handles the cold better.
We have this. Needs an action and trigger job to really appreciate this revolver
Bruce, I concur. The only reason I didn't, (yet?), is I wanted a low-cost trail gun. Didn't want to spend approximately half the cost of the revolver on a trigger / action job. Did you have this work done? Are you happy with it? Do you know the trigger weight after? No creep? Any light primer strikes? Cost and who did it?
Anyone know a holster that works with the optics ?
Holsters are hard to find for it, especially for left handers.
I never even thought about lefties. Please post if you find one!
Do they have moon clips for the 605
Never looked. I'm not sure you can have a moon clip in 357? I did get speed strips and a speed loader.
www.amazon.com/gp/product/B0B4GRD5V1/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
www.amazon.com/gp/product/B0000C1CLL/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I went with the toro edition same barrel
I'm getting up there in age. My eyesight isn't what it used to be. Laser or red dot sure makes it easier to acquire the target. I just have a slight difficulty finding that red dot with the red dot sight. I believe with enough practice I could improve my ability to find it. With no ammunition in the gun or even the room, practice drawing the revolver and acquire the target.
What round do you load up with, 38spl or 357MAG?
I reload, so most of my shooting is reloaded. I also have a 357 lever action to fire in both I use 158 JHP, 13.1 Grain 2400, or 140 FMJ, 13.5 Grain 2400, or 125 FMJ, 15.3 Grain 2400. For target and my wife's favorite I load 148 Plated Hollow Base WC, 4.3 Grain HP38. I don't like to use reloads for self-defense, I mainly use just about any 125 gr jacketed hollow point. For trail carry, I use that buffalo bore 180 gr flat nose. It is a very heavy recoil though! I don't shoot 38's as I can reload light 357's.
@NotAllEngineersAreBoring Thank you for responding. For a 2 inch and 3inch 357MAG, you could go with a low recoil or lower energy 357MAG or even a low energy cowboy load 357MAG. What do you think. I would go heavier than 110grs.
If for self-defense go for a full load. You need to stop the threat quickly. If you're sensitive to recoil or target shooting, tame it down. I always push slightly with my dominant hand and pull slightly with my off hand. This helps minimize muzzle jump and gets your sights back on target.
I got to hold one, it felt small light with a small grip. I opted for the Tracker 4" ported medium frame Instead. Glad I made that choice and just didn't buy this thing online somewhere.
I'm sure you will enjoy Mr. James Bond.
Got em 💯. Remington's 🤝
Where in the world did you buy that gun for under 300 dollars.
Lo siento mucho! Typo, S/B under $400 a year ago. So "No", you're not getting ripped off.
@@NotAllEngineersAreBoringI didn't say anything about getting ripped off.
I just meant you won't find it for < $300.
Probably a better choice than the 2" barrelled snubbie.
As I said, 3" has a lot better ballistics. Two inch is borderline pocketable. The 3" is a bit to long for a pocket. Both are fine for IWB holsters. But I wanted a trail gun. After owning it for over a year, I still like it for my purpose. I did pack it on several wilderness fishing trips in northern Wisconsin with a healthy black bear population. I didn't have to use it for the bears, but it was comforting to have. It is a fun plinker too.
@@NotAllEngineersAreBoring I think you made a good choice as far as barrel length in .357. I have an 856 and 605 with 2" barrels, wish the 605 was a 3", but the Defender series was not out when I bought it.
@@wes326 You get an extra round with the 856 and it has the same thickness at 1.4", (cylinder diameter). The 856 is pocketable. The 3" is just a bit to long for a pocket. Requires a holster.
Very nice review sir
Thank you Dan.
@@NotAllEngineersAreBoring welcome 👍🏻
If it was a 6 shot instead of 5 I'd say ideal for my use as a trail gun.
Yes, always trade-offs. Larger cylinder diameter could turn off some purchasers. Less capacity does also. I only have black bear here in Wisconsin. Five will be sufficient.
Thorough! Thanks111
Thank you for your compliment. Do you own one or thinking of getting one? Just curious.
Taurus reached out to me and suggested Galco holsters for the 3" 605. Check it out..... shoptaurus.com/holsters/?_bc_fsnf=1&brand=15&Model=Taurus+605
oops commented to soon. see you answered that question. My bad
No worries, John. Any suggestions for another video?
Finger covking? Thumb cocking? You mean 😂Double Action and Single Action ? And I've had ok customer service from Taurus.
Call me old fashion. I was pen pals with Col. Jeff Cooper, (pre-internet, we used snail mail). Then I met Jeff at Gunsite when he taught there. The original definitions were, double action meant two types of actions, 1) finger cock and 2) thumb cock. If you could only use the thumb cock that was a single action. If you could only use the finger cock, that was single action too. This could be misinterpreted so "finger cock only" was used. "Double action only" was non-sensical. These were Jeff Cooper's definition also. I understand over the years it no longer has that meaning. I doubt Jeff Cooper would have accepted it, But I accept it. However, I still use Finger or Thumb cock. I keep true to the original definition, and everyone knows what I am talking about.
Glad to hear customer service is OK. I didn't have to use it. What Taurus do you have and why did you need customer service?
Don't make 5 shots cylinder. Outlaws are many, armed & very dangerous so make 8 shots the minimum.
I use the 605 as a trail gun. I mostly plink with it. I never needed to shoot an animal with it, (yet).
My CCW guns are all semi-auto, large capacity and quick reloading. I use these for the same reason you mentioned above.
I believe Tauras did this to keep handgun width down for concealability. The 605 has five rounds of 357's at a cylinder diameter of 1.4". The 656 has six rounds of 38's at the same 1.4" diameter cylinder. In my opinion, I prefer five 357's over six 38's.
Double and single action
Call me old fashion. I was pen pals with Lt. Col. Jeff Cooper, (pre-internet, we used snail mail). Then I met Jeff at Gunsite when he taught there. The original definitions were, double action meant two types of actions, 1) finger cock and 2) thumb cock. If you could only use the thumb cock that was a single action. If you could only use the finger cock, that was single action too. This could be misinterpreted so "finger cock only" was used. "Double action only" was non-sensical. These were Jeff Cooper's definition also. I understand over the years it no longer has that meaning. I doubt Jeff Cooper would have accepted it, But I accept it. However, I still use Finger or Thumb cock. I keep true to the original definition, and everyone knows what I am talking about.
Yea now I want one lol
It will not disappoint. Let me know if you get one and what your thoughts are.
👍👍✔✔
Thank you! What did you like? What was not so much? Looking to improve my next attempt.
Its made to shoot 38special or 357 mag and u are saying to be careful when shooting 38 special or 357 because it might bind up?? With all do respect sir: U MAKE NO SENSE!!
If you shoot a lot of 38's, a carbon ring can form in the cylinder. Since a 38 is slightly shorter, when a 357 is chambered in the cylinder the ring is over the brass case. When fired, it can make the case difficult to eject. Hope this clears it up for you.
Could use a little more excitement
I am amazed. This is my first, (and, so far only), video. I have not had ANY criticism. So, your constructive criticism is very welcomed. I do want to make more, but only for the fun of it. Thank you. Also, I don't want to be a boring engineer. I was a bit nervous. That's my only excuse. Stay tuned!
Did he really say trithium vile 😂
He sure did say "TRITIUM VIAL". Not bad for a budget revolver. Tritium or hydrogen-3 gas has a half-life of 12.5 years. Being a gas is why a glass vial is used to contain the tritium. I have some sights that are @30 years old, and they sure don't seem to be half or 1/4 as bright. Seem near as bright as newer sights.
Note - He usually doesn't talk in third person. 🤣
You show yourself firing one god damn round?
Like I said, it was "stout". But I'm not that sensitive to recoil. I use the Weaver stance and push slightly with my dominant hand and pull slightly with my off hand. Really helps with the muzzle jump and felt recoil.
BTW - The cylinder latch did bite my thumb from the recoil of the Buffalo Bore 180 gr. maybe around the third shot. I sucked it up and continued the volley. I didn't want to re-film it.
Bad customer service, don’t buy this brand.
This is my only Taurus. I didn't have to have it serviced, (yet?). Thanks for the heads up. Why, what did they do to you?
@NotAllEngineersAreBoring screw in butt stock stuck out the other side about a quarter inch, had to beg to get something done. Two weeks later they aren't email saying package on its way, I said package for what, finally after days told me they sent screws, took three weeks.
@@WoodysbackOh, so you're just impatient and think you're their only customer. You're crying about 3 weeks? Pathetic, trade in your guns and get your nails done and change your name to KAREN.