My contractor used I-Beam dead-mans driven 10' into the ground and spaced about 10' apart. From each I-Beam, he connected rods that connect to the wall. In addition, my wall has two (one, high one low) I-Beams attached horizontally to it, which are also connected to the dead-mans by another I-Beam. I'm surprised to see the deadman pipes here are only 6' long. I suspect my installation will far outlast this one.
Dale, just subscribed. Have learned so much from your videos and I am paying close attention. About 5 inches of rain in an hour in July was more than our seawall could handle and it buckled along the waterline - probably needs to be replaced. I wish you and your crew worked Florida's NE Atlantic coast but your videos have made me aware of the right questions to ask when hiring a seawall contractor in this area. Keep putting out those great videos!
August good to hear from you took six weeks off to recover my bicep tear. Back in the action now so I’ll be producing some more videos as we complete jobs. Thanks so much for watching and commenting
Thanks Dale, I appreciate your video……as a matter of fact I entered the shoreline business last fall in Lake Erie here in Ontario. Watched many of your videos repetitively to learn about the business. Thanks so much!
That is pretty cool don’t think I could give a whole Lotta help in Rocky situation‘s we just deal with sand and clay down here. Good luck in your endeavors. Just do what you say you’re going to do and do a little bit better and you will be successful.
Thanks for your question I like to install pilings in front of walls that are exposed more than 5 foot with the Center whaler Support in the Piling this keeps the center of the wall from bowing out.
Thank you so much for watching my RUclips channel and your comment! ¿cómo estás hoy? We use the Everlast heavy sheet typically minimum links or 12 foot that we use on up to 20 feet
The thickness on the vinyl we use is .35. everlastseawalls.com/?gad=1&gclid=CjwKCAjwxOymBhAFEiwAnodBLFjzw9eczXHuUEEcYHhImOwnYacOvzdoAZKwFZ1ZsEn9OGy07YMcmxoCnnEQAvD_BwE
@@DaleWHickman That is what I guessed, you are lucky. I need to build foundations for heavy stainless steel whips for a 45' catermaran on a solid coral rock seawall. Can't figure out what direction to go...
Thanks for watching my channel and your comment. I typically do not discuss pricing on the Internet due to competition watching my page. Thank you for understanding.
Хобби
Brings back memories of doing a 900 ft deadman along the Chelsea Creek in Boston. Learned so many skills during that job.
My contractor used I-Beam dead-mans driven 10' into the ground and spaced about 10' apart. From each I-Beam, he connected rods that connect to the wall. In addition, my wall has two (one, high one low) I-Beams attached horizontally to it, which are also connected to the dead-mans by another I-Beam. I'm surprised to see the deadman pipes here are only 6' long. I suspect my installation will far outlast this one.
That sounds great. Steel I beams in environment that I work in would not last super long so that’s why we choose Wood.
Dale, just subscribed. Have learned so much from your videos and I am paying close attention. About 5 inches of rain in an hour in July was more than our seawall could handle and it buckled along the waterline - probably needs to be replaced. I wish you and your crew worked Florida's NE Atlantic coast but your videos have made me aware of the right questions to ask when hiring a seawall contractor in this area. Keep putting out those great videos!
Thanks so much for the compliment I don’t know how I overlooked your comment thank you so much
Thank you so much, this is really so helpful to understand as a homeowner with a seawall. Thanks!
Dale do you have a contact for a used plate compactor? Have a 308 Cat that I looking one for.
Awesome video. Thanks from NC.
Thank you John and thanks for the comment 😄
Thank u for this video and information.
Dale great instinctual video, thanks sharing your knowledge with everyone
Thanks Paul are you getting hunker down for cold weather? we had a little blast at 40° here this morning
@@DaleWHickman yep its getting colder here in New York...
Sir I would really appreciate if u could let me know .How much is the average pay for this type of job & thank u so much !
Great job informative. Would like to see just a little more details on the final product. Anchoring hooks or eyebolts at seawall, etc. Thanks again.
Thanks for the idea!
First like. How's it going Dale ? Been missing your videos ! Thumbs up.
August good to hear from you took six weeks off to recover my bicep tear. Back in the action now so I’ll be producing some more videos as we complete jobs. Thanks so much for watching and commenting
@@DaleWHickman, Excellent, can't wait ! Hope your arm is much better now.
Great work boss, I seriously thinking about taking the marine contractor test. Is it as intense as I hear?
Thanks for watching your comment. Yeah it’s pretty intense. A lot of stuff that we don’t even do two times believe it or not.😄
What kind of vibratory hammer is that. Do you recommend any brand in particular?
Nice Video!! TGIF 🇺🇸🥩🙌
I hated doing bulkhead work. Built tons of these in the early 2000's on Texas coast
😂😂
It is definitely tough work equipment does make it a lot easier 👍
Hi Dale, would you share the brand of drag plate tie backs your using? Would be interesting to try them out here in Canada.
Thanks for watching my video David! The tie back system is Manta Ray soil anchors you can Google that and it will pop up 👍
Thanks Dale, I appreciate your video……as a matter of fact I entered the shoreline business last fall in Lake Erie here in Ontario. Watched many of your videos repetitively to learn about the business. Thanks so much!
That is pretty cool don’t think I could give a whole Lotta help in Rocky situation‘s we just deal with sand and clay down here. Good luck in your endeavors. Just do what you say you’re going to do and do a little bit better and you will be successful.
Why are your posts in front of the vinyl and whalers? I'm a subscriber and interested in building a seawall.
Thanks for your question I like to install pilings in front of walls that are exposed more than 5 foot with the Center whaler Support in the Piling this keeps the center of the wall from bowing out.
Dale do you have a contact for a used plate compactor? Have a Cat 308 that I am looking one for.
Hey Ashley not sure if he still has one but he had contacted me trying to sell a used one
Nick Beard Equipment
(850) 567-1076
Thanks
Can you all do this kind of work in Jamaica
Thanks for watching my videos. I appreciate it and yes I can do the work in Jamaica but I choose to stay here we have plenty to do. 😃😃👍
Dale, te escribo desde Colombia.. Una pregunta,: Qué tipo de láminas usas?... O, cómo se llaman?.
Thank you so much for watching my RUclips channel and your comment! ¿cómo estás hoy?
We use the Everlast heavy sheet typically minimum links or 12 foot that we use on up to 20 feet
@@DaleWHickman gracias Dale.. En qué espesor? Thickness?
The thickness on the vinyl we use is .35.
everlastseawalls.com/?gad=1&gclid=CjwKCAjwxOymBhAFEiwAnodBLFjzw9eczXHuUEEcYHhImOwnYacOvzdoAZKwFZ1ZsEn9OGy07YMcmxoCnnEQAvD_BwE
Are you driving into sand or coral rock?
Thanks for watching in your question, but thank God we only have Sand here and some hard pan clay.
@@DaleWHickman That is what I guessed, you are lucky. I need to build foundations for heavy stainless steel whips for a 45' catermaran on a solid coral rock seawall. Can't figure out what direction to go...
So what's the cost on that job ?
Thanks for watching my channel and your comment. I typically do not discuss pricing on the Internet due to competition watching my page. Thank you for understanding.
Have you ever had a mantaray fail
I have had some fail in muddy areas, and I change them out to a swamp anchor, and went back additional depth until they would hold