Thank you SO much for showing how you modified the high capacity mags! I was reluctant to buy them because I didn’t want to mess with them but it looks so easy I went ahead and ordered two. Thanks again great video
@@ungabunga6735 ya welcome. I strongly recommend you use hand file and file on the same angle as on the standard mag, do one mag at a time. File a little then test, keep repeating. It's really easy.
I just bought one today for $103 with tax. US Took it straight home and it ran like a scalded cat. Every bit as good as my Rugar 10/22 and Savage 44 both more than double the price. It’s an ugly, remarkably plastic gun but it’s very comfortable, light and easy to maneuver. For $90 I don’t see anything to complain about. The magazine could be easier to load but it’s just fine and much easier to load than my Taurus TX22 and quicker than my Henry H001 lever.
I've had one for a month or so. Here in the States you can get them from $99 to $120. You can adjust the rear sight for windage and the front sight for elevation. It's hard to see the screws are small. They don't come with a manual. Looking online for the manual it still doesn't say how to adjust sights. Derya's videos of this gun all show a cheek riser. But they are not shipped with one. All in all for what it is. I like this little cheap rifle.
thanks for chiming in but the sights doesnt have screws, they are pins that are adjusted at the factory. not for us to adjust. i'll have a better idea when i do the full monty. btw, i paid US$103 but i'd to pay two shipping , tax and currency conversion. still a good deal.
@gnutzguy I'm looking at the sight adjustment screws right now. They are small Allen wrench. I literally have Allen wrenchs in them adjusting. On the picatinny rail look on the right side. On the long 7 inch groove you will see a pin. Directly above that pin is a small groove in between the picatinny grooves. In there is a very small Allen screw for windage. Now on the front sight look directly down on the sight About a half inch from the end of the barrel and just as the front blade starts. You will see another Allen screw. If you want you can email me and I'll send you pictures.
i can confirmed the rear sight is adjustable with a 1.5mm allen wrench. i couldnt with the front bcos i didnt have the correct size wrench but i will assume its also adjustable.... thanks
Very insightful video. I have been told time and time again the legal capacity limit for rimfire in Canada is 10 rounds but that’s not true! I would really like to visit Canada and do some shooting and fishing
@@drkalowski256 correct, no limit on 22 lr capacity but recently they banned a bunch of my semi auto 22s based on looks, eg: GSG16, Gsg mp40, Gsg stg44, Gsg15, issc mk22, all 22lr. Canada is a great place to come fishing and hunting. Hunting you need a guide.
@ I definitely would need a guide cause I’ve never done any hunting what so ever, it’s sad to see how Canada has turned like my birth country Germany with the strict regulations and nonsensical actions. I currently live in Alabama where we have little restrictions. I’ve got a binary trigger on one of my 10/22s, which it’s fun but sometimes a pain in the ass! I mainly stick with .22 since it’s what I can easily afford but I’ve got a nice SKS, M1 Carbine and a few shotguns and lever action rifles which belonged to my grandfather and father I like the gun culture in Canada, it’s interesting to see what our northern neighbors like and may own. I’ve had a fair share of negligence when working behind a gun counter down here in Alabama
Nice play rifle... I used Rem Golden & Aguila 40 grain. The Golden would jamb over the Aguila. Aguila wanted to go down and left compared to Golden. Going to run Winchester X & CCI next time.
Never heard of that make of rifle before but Turkey has a lot of makers of guns well I assume they they are all separate firms not one firm churning out various guns under different brand names you never know these days.
i didnt buy it yesterday bcos they recommend higher mv then 1070 so im gonna stick with my minimag (gsg16 likes minimag) but i did buy blazer 38gr 1235mv.
Thank you SO much for showing how you modified the high capacity mags! I was reluctant to buy them because I didn’t want to mess with them but it looks so easy I went ahead and ordered two. Thanks again great video
@@ungabunga6735 ya welcome. I strongly recommend you use hand file and file on the same angle as on the standard mag, do one mag at a time. File a little then test, keep repeating. It's really easy.
Front and rear sights are adjustable. Good vid.
please read descriptions, lol.
I just bought one today for $103 with tax. US
Took it straight home and it ran like a scalded cat. Every bit as good as my Rugar 10/22 and Savage 44 both more than double the price.
It’s an ugly, remarkably plastic gun but it’s very comfortable, light and easy to maneuver. For $90 I don’t see anything to complain about.
The magazine could be easier to load but it’s just fine and much easier to load than my Taurus TX22 and quicker than my Henry H001 lever.
thanks for sharing.
$89.99 Black Friday doorbuster. And I put a $30.00 Cvlife 3-9x40 on it. I have yet to hit the range yet.
@@jeffbrowning4684 this probably the most accurate of all my guns under US$500.
I've had one for a month or so. Here in the States you can get them from $99 to $120.
You can adjust the rear sight for windage and the front sight for elevation. It's hard to see the screws are small. They don't come with a manual. Looking online for the manual it still doesn't say how to adjust sights. Derya's videos of this gun all show a cheek riser. But they are not shipped with one.
All in all for what it is. I like this little cheap rifle.
thanks for chiming in but the sights doesnt have screws, they are pins that are adjusted at the factory. not for us to adjust. i'll have a better idea when i do the full monty. btw, i paid US$103 but i'd to pay two shipping , tax and currency conversion. still a good deal.
@gnutzguy I'm looking at the sight adjustment screws right now. They are small Allen wrench. I literally have Allen wrenchs in them adjusting. On the picatinny rail look on the right side. On the long 7 inch groove you will see a pin. Directly above that pin is a small groove in between the picatinny grooves. In there is a very small Allen screw for windage.
Now on the front sight look directly down on the sight
About a half inch from the end of the barrel and just as the front blade starts. You will see another Allen screw. If you want you can email me and I'll send you pictures.
i can confirmed the rear sight is adjustable with a 1.5mm allen wrench. i couldnt with the front bcos i didnt have the correct size wrench but i will assume its also adjustable.... thanks
@gnutzguy No problem. At first I didn't think they were adjustable either.
Very insightful video. I have been told time and time again the legal capacity limit for rimfire in Canada is 10 rounds but that’s not true!
I would really like to visit Canada and do some shooting and fishing
@@drkalowski256 correct, no limit on 22 lr capacity but recently they banned a bunch of my semi auto 22s based on looks, eg: GSG16, Gsg mp40, Gsg stg44, Gsg15, issc mk22, all 22lr. Canada is a great place to come fishing and hunting. Hunting you need a guide.
@ I definitely would need a guide cause I’ve never done any hunting what so ever, it’s sad to see how Canada has turned like my birth country Germany with the strict regulations and nonsensical actions. I currently live in Alabama where we have little restrictions. I’ve got a binary trigger on one of my 10/22s, which it’s fun but sometimes a pain in the ass! I mainly stick with .22 since it’s what I can easily afford but I’ve got a nice SKS, M1 Carbine and a few shotguns and lever action rifles which belonged to my grandfather and father
I like the gun culture in Canada, it’s interesting to see what our northern neighbors like and may own. I’ve had a fair share of negligence when working behind a gun counter down here in Alabama
Nice play rifle... I used Rem Golden & Aguila 40 grain. The Golden would jamb over the Aguila. Aguila wanted to go down and left compared to Golden.
Going to run Winchester X & CCI next time.
it loves mini mags.
front of fore stock pops off to expose a picatinny for a flash light or bipod.
@@carldeangelo855 correct, that's what I demo, lol
I just bought this gun yesterday for 98 dollars total in nc
welcome to da club.
Need to work on your follow-through and trigger control. Good review!
@@EagleEyeShooting you are probably right but I'm not concerned. I'm mostly table top stuff
@@gnutzguyhi is this a plastic trigger?
@thirtyhitcheapz yup, practically everything are plastic
Did Castro make that illegal before rage quitting?
@@mattgeiger9988 nope, still legal and probably still legal when we vote them out
Who was your importer?? I am looking for one and just was to make sure the guy i have is legit. Great content as usual
@@Alwayslostdad lol. There is only one importer to Canada.
Never heard of that make of rifle before but Turkey has a lot of makers of guns well I assume they they are all separate firms not one firm churning out various guns under different brand names you never know these days.
deryaarms.com/about-us
i got a winchester wildcat from turkey, i like it and it takes 10/22 mags.
Buyer BEWARE! Mine arrived with a jammed .22LR casing in the chamber. Inspect fully before you fire it.
@@jamescdean9010 yup, always run a patch down the bore. Good advise
Bought one on black Friday for $89 USD. Couldn't pass it up.
@@maurijm21 sweet, did you buy two? Lol
at sportsmans? i work for them and sold a crap ton of these. i bought one aswell
@BadAssBassFishermen did you get a employee discount?
same it was at sportsmans for black friday
@@gnutzguy no the black friday price was better then the employee discount
you may want to try the CCI standard velocity, they are more accurate than mini mags in all my rifles.
thanks, i will try that next time but for consistency and comparison, i will continue with mini mag.
@yourmomma2995 what gr is the standard velocity?
@@gnutzguy 40gr.
@@yourmomma2995 thanks. Mine didn't like rem golden bullet 36 gr
i didnt buy it yesterday bcos they recommend higher mv then 1070 so im gonna stick with my minimag (gsg16 likes minimag) but i did buy blazer 38gr 1235mv.
❤
go get some!!! lol.
Chiappa Badger is OG, it's pretty accurate with my x35 on it ;-)
Badger is known for harsh recoil, make sure you mount with a mono-block scope rings!
Thats like $90 us.
@@robertjones2811 you can get them for us$90? Sweeet. Buy two.
Bought one today. 108$
@randylee1047 sweet deal
@@gnutzguymine was 185 USD after taxes, I reckon I could have got it for way less at a larger store but I got it from a local small business
Did you buy it from the I run guns website? Oh, nevermind. I just read your description. Ha ha ha.
@@clockworkbike they are now in Canada so the price reflects that at US$129
No gun likes remington gold....it is the worst type of ammo on the market currently.
Lol. I think my Henry ar7 liked it
I’ve seen a few 10/22s operate their best on it. Not their most accurate, but it operated the bolt and ejection better than any other.
120 in the usa 😊
Yup but I had to pay shipping twice plus conversion to Canadian $$$$
@gnutzguy that sux to live in Canada
yes indeed, when it comes to firearms.
On sale at dunhams sporting store for 99 USA. Got 3 of them for the family
Im getting it for 89 for Black Friday jajajajaja
rear sight adj on the right. front adj elevation.
lol. please read description.
And a
TM = Turkish Made
nah.