I tell you, having the right kit makes such a difference. That looks amazing, Scott...you have worked your socks off. Beautiful work.👍👍👍 P.S. I love the soak away...ingenious
What a beast of a machine, it leaves a superb finish. The jobs looking smart pal, It'll look the absolute business when you get the finishing bits done.
Great job Scott, the new cutter may have been expensive and bulky but it will give a consistent professional finish and save you loads of time in the long run.👍
That’s a beast of a tool you got Scott, makes life easier for yourself mate and in time that will end up paying for its self plus more 👍. I can’t believe how much you have got done from the last video you done on this job, looking well Impressive mate, keep the hard work going and keep the content coming. Think you should do another video of you Diamond 💎 polishing up the edges be good to see how’s that done mate 👍!!
Nice one mate I bought a small one of these when I did my drive last year made the job so easy cutting slabs Worth its weight in gold The job once again is the dogs bollox
Cracking job fella, might have tiled the block work first before laying the slabs on the steps personally. I find it easier that way with the cuts and also I think it gives a better finish overall. Really enjoy the channel mate 👍🏼
Thanks for watching mate the final decision was only made today mate and really needed to get the steps done the tiles for the walls are like rock faced so would be a bigger job to cut step tiles around them as they would all have to be scribed 😳👍🤟
You must make some money you Scott you’ve got some top gear which would make sense if you had a shit home but that’s top too 😂 clad those walls Scott use some nice angle or tile trim mate some stainless or something seen as your toppers don’t allow for a tile either side, look spot on
ive got the battipav vip110 which is the same saw as you just a 110cm length of cut. plus I've got the side extension table. personally i don't think this is the right saw to be cutting that thick tiles on a regular basis. Anther model would have been a better choice. Don't want to sound negative.
@@Scottchallinorwoodturning also grab some sharpening stones I get mine from Topps tiles but just run it through after a few cuts you will tell the difference 100%
Nice vid Scott ! Jeez that a lot of cutting you doing ! Did a miss it or are you cladding all the walls with porcelain? If you are fxxk your more of a man than me will be propa time consuming that ! A company near me has the same saw as you and charge £10 per cut ha ! Obviously I don’t use them unless it’s loads of planks for borders to be fare 👍🏻👍🏻👍🏻
Scott watched this from day one you’re worked
Bloody hard on it but well worth it in the end
I bet the customer is well cuffed 💪👍👏
Yeh mate when I came back this afternoon with the tiles I could see the excitement in the customer face and also thinking he will be gone soon
Brilliant scotty just Brilliant mate
That's a beast of a machine that Scott and will make life a lot easier for cutting..... : )
Job is lookin boss Scott lad , well in mate 👍🏻👏🏻👏🏻👏🏻
I tell you, having the right kit makes such a difference. That looks amazing, Scott...you have worked your socks off. Beautiful work.👍👍👍 P.S. I love the soak away...ingenious
Let see what I looks like in 10 days from now and thanks pal
That job is fantastic looking forward to seeing it finished well done.👍👍👍
Thanks Richard
Looks really well Scott. Personally would be really interested in seeing the diamond polishing on the edges when you do it 👍
No problem Jon I will do that just for you mate good shout
@@Scottchallinorwoodturning 😁cheers mate 👍
What a beast of a machine, it leaves a superb finish.
The jobs looking smart pal, It'll look the absolute business when you get the finishing bits done.
Ò she cuts can't wait to see the end result not far Away now
Watch out lol changy’s got his eye on that I’ll bet
Great job Scott, the new cutter may have been expensive and bulky but it will give a consistent professional finish and save you loads of time in the long run.👍
Sure will mate its thanks for watching 👍
Well done pal looking fantastic, definitely a job to be proud of,
Very nice of you to say so thanks pal
That’s a beast of a tool you got Scott, makes life easier for yourself mate and in time that will end up paying for its self plus more 👍. I can’t believe how much you have got done from the last video you done on this job, looking well Impressive mate, keep the hard work going and keep the content coming. Think you should do another video of you Diamond 💎 polishing up the edges be good to see how’s that done mate 👍!!
Cheers mate it's slow working on your own but you just got to keep goin and I will surely do another video of me doing the edges
I love the tops of the walls it's all looking really good a massive job that has been done well
Cracking job fair play.
Great stuff Scott, garden job looking great 👍
Ta pal 👍
Nice one mate
I bought a small one of these when I did my drive last year made the job so easy cutting slabs
Worth its weight in gold
The job once again is the dogs bollox
Looks really good Scottie
Thanks like will be better once the wall are covered 👌
Great job Scott as always immaculate!
Done a great job you make it easy for the customer to choose the best for the job great work
Oioi pal jobs looking mint as all ways what a machine 😎👌💯
Elite stone tools do the best blades for wet cuts. Got 70 cuts out of 1 blade on 20mm 900x600 porcelain. No fragment chipping either
What a cracking cut
Looks mint Scott ! Keep it up 💪🏻👊🏻
Cheers glenn
Cracking job fella, might have tiled the block work first before laying the slabs on the steps personally. I find it easier that way with the cuts and also I think it gives a better finish overall.
Really enjoy the channel mate 👍🏼
Thanks for watching mate the final decision was only made today mate and really needed to get the steps done the tiles for the walls are like rock faced so would be a bigger job to cut step tiles around them as they would all have to be scribed 😳👍🤟
@@Scottchallinorwoodturning argh ok, yeah I thought it could well have been an after thought on the walls. I'm sure you'll do a class job on it 🤙🏼
I thought a man of your talent would have made some adjustable legs for your tile table🤔
That’s a lot of tile....but you have the equipment 🔥🔫
Nice bit of kit. Did you leave the safety contacts at home or were they not man enough for the job?
Ski goggles all the way mate🤣🤣
How do me ode how are you pal let’s get this man other 5000 subs
Great job scott lad 👍🏼
Don't forget to redress the blade on a concrete block for longevity.
Take care matey
The blade is getting dressed every few cuts mate but man them slabs are bell iron
@@Scottchallinorwoodturning I have just layed our granite patio 30mm beasts, now they are some ballache slabs to cut 😳 👍🏼
I bet mate these are like iron but getting through it
@@Scottchallinorwoodturning if I hear the mrs say "it'll look lovely when it's done" one more time 🤣🤣
Job looks good mate 👍
You must make some money you Scott you’ve got some top gear which would make sense if you had a shit home but that’s top too 😂 clad those walls Scott use some nice angle or tile trim mate some stainless or something seen as your toppers don’t allow for a tile either side, look spot on
ive got the battipav vip110 which is the same saw as you just a 110cm length of cut. plus I've got the side extension table. personally i don't think this is the right saw to be cutting that thick tiles on a regular basis. Anther model would have been a better choice. Don't want to sound negative.
Beautiful
I've got one for you later or tomorrow keep an eye out mate
@@Scottchallinorwoodturning better be good.
Hi Scott what blade are you using in the machine. I bought the ox pro 22mm porcelain blade but there is a lot if vibration.
Very nice
Great job
Go on to ats Diamond blades and get a new blade of there, Cuts loads faster and clean aswell 👍🏼
What you paying for them mate
@@Scottchallinorwoodturning payed £70 for mine with next day delivery bud
@@Scottchallinorwoodturning also grab some sharpening stones I get mine from Topps tiles but just run it through after a few cuts you will tell the difference 100%
Yes quality blades from them
All sound now.
🏆🥈
Great looking saw lad, what sort of price are they, I was thinking on buying a ruby dc250 but in two minds now
Skiing 👌 let's us know in the comments ✌️
Nice vid Scott ! Jeez that a lot of cutting you doing ! Did a miss it or are you cladding all the walls with porcelain? If you are fxxk your more of a man than me will be propa time consuming that ! A company near me has the same saw as you and charge £10 per cut ha ! Obviously I don’t use them unless it’s loads of planks for borders to be fare 👍🏻👍🏻👍🏻
Yes mate they are all being clad mate I will show you all the tiles they have chosen on the next video
@@Scottchallinorwoodturning bloody hell that’s gunna be a lot of gladding and cuts ! Rather you then me sir 👍🏻👍🏻
I'm sure I'll be sick of them cuts by the end of this job 🙃
This job must been costing thousands. Seems a lot to spend on a house like that
The customer gets what they want mate what more can I say
@@Scottchallinorwoodturning your doing a cracking job mate keep up the good work .
No volume Scott.
Try again mate
👍👍👍👍👍
What do you use to fix your copings on?
Sharp sand building sand and cement and sbr slurry on the wall and the tile
@@Scottchallinorwoodturning lovely thanks
No sound 😭
It s good here mate
It's working now garden looks quality 🙌