Extreme skill ! If you had the means of Western countries, you would do even better. But it is the genius of your workers that is the best. I wish you good health and great... great financial health. Good luck. (Algerian)
How could you control the Vibrations for such a long heavy shaft, I assume your Lathe is a very good Lathe for a heavy duty work. Good Work, I keep watching & enjoying your good skill.
at 17 minutes no keyway, then they spin it at 18 minutes and magically there what looks to be four or more 4" x 20" keyways. Would have like to see how that was done....
You’re being a little sarcastic here methinks!? Right tho! Amazing is an overstatement, but they do well when you consider the infrastructure and open air conditions! Cheers
Guys you are doing a good job with limited amount of resources; I guess the life must be cheap in Pakistan as safety gear is non existent - machinist working without safety glasses!!!!!!!!! Loose your eye and the owner gets a new worker - cheap.
At least these guys look like they take care of their equipment, most of the places are outdoors in the dirt and the equipment isn't taken care of very well.
Một trục kim loại to lớn có chất liệu thép rất cao, để tiện được thành sản phẩm giá trị cao, thật sự là một thách thức trí tuệ,qua biểu tượng nâng niêu của các bạn cuối cùng bóng sáng,cho thấy các bạn phân kim rất giỏi và rất thông minh, đó mới là trí tuệ ánh sáng, cảm ơn video chia sẻ của bạn rất hay và ý nghĩa, chúc các bạn sức khỏe hạnh phúc thành công.
@@thepubliceye I think that the roof is full of holes as you can see that it's probably raining inside, you can clearly see the water splash on the part.
@@GamingStarslegends01 Do you know if there is a video that shows from the mining of the stones (raw material) to the finished product? It would be interesting to see from stone to steel (or whatever metal) product.
In this case and that goes for many steel products in Pakistan, it's mostly salvaged parts from oceangoing freighters/ cruiseschips etc. It says in the title something about a shaft from a ship so that would be the propellorshaft. So then you would have to back to the late '70's or the '80's to first see the ore being mined for this shaft, then being forged and hammered in (probably) a European shipyard and conclusively turned on an even bigger lathe then this😅. Then after 30/40 years sailing across the world the ship's a write off; gets beached on the Pakistani beach and scrapped. And there you have your shaft here in this movie...
I often would stack 1 inch carbide cutters when ruffing out pieces like these and spend the day on a grain shovel shoveling chips. Ahh, the good old days eh.
I hope people watching this will understand the cost of the steel material alone that the shop owner has invested in this part. Plus many hours of labor to have it machined correctly. It only take one wrong cut by the machinist to make this into a huge piece of scrap metal. Then the shop owner has to replace the steel and start machine work over again. If this was a 15 ton part to start with in the US thats around $30k or more worth of steel. More if its an alloy. This looked like mild steel forging.
yeah, it doesnt look like the chain is large enough to carry such an immensely heavy object...it also depends on the grade the chain has, if it is grade 100 or 120 , of course it will hold much heavier objects than a ordinary grade 80 chain, but if i had to guess, the Indians dont get to use such high grade chains due to the cost, a grade 120 chain, is just much much more expensive than 80 grade....to be able to lift a 15 ton object, i think at least the chain dia should be more than 16mm , preferable 20mm or more...its hard to tell wht diam., chain theyre using here....
@@shagrov1 а тут работа на станке сто летней давности и измерение сто летними методами и инструментами + все одним резцом. Вот это и восхищает. Чпу это пшик, а ручная работа это самая суть нашего дела.
شيء رائع وتعاونوا على البر والتقوى. قطعة هائلة من الحديد على ما يبدو أنها ليست من الحديد الصلب من خلال لمعانها يا ريت لو تكون بعض التفاصيل على محتواها شكرا 👍🇲🇦
Extreme skill ! If you had the means of Western countries, you would do even better. But it is the genius of your workers that is the best. I wish you good health and great... great financial health. Good luck. (Algerian)
It's great to see something productive without the restrictions of Aerospace/Nadcap, Brilliant work
My thanks, from Canada.
good job brothers🇵🇰 pakistan from 🇸🇴 somalia insha alaaah
This is probably the cleanest machine shop I’ve seen from India! And organized!
Haa
Beat guess is India but not necessarily.
Greetings from Turkey to my Pakistani brothers.
Me too from Egypt to my pakstani brothers
It is a splendid show!
Beautiful machining. Enjoyed this video
Darn- I was waiting for them to load it on one of those 3 wheel scooter trucks.
Instead, a lorry with bald tyres!
That’s funny
Thats just a big three wheel scooter. Pulled by four donkeys that were ready to go.
Exlentent job paji
why not use the coolant love from EAST PUNJAB🇮🇳 INDIA❤❤❤thank you for your upload videos🙏🙏🙏
Colent use for grinding
How could you control the Vibrations for such a long heavy shaft, I assume your Lathe is a very good Lathe for a heavy duty work. Good Work, I keep watching & enjoying your good skill.
Chao may ban nhe thanks ky thuat cua ban con tho so qua thanks nhin thay cau nang nguy hiểm quá
I really enjoy this really heavy work, thanks!
big lathe, good work!
what machine is that for, this is huge
at 17 minutes no keyway, then they spin it at 18 minutes and magically there what looks to be four or more 4" x 20" keyways. Would have like to see how that was done....
I love these videos! Nothing is impossible. 💪💪👍👍
A steady rest or maybe even two might be useful for the usual reasons.
Yea....I was feeling bad for that live center.
Brilliant n magical. When they turned the shaft around, suddenly, there were 2 key slots already machined off. So magical.
You’re being a little sarcastic here methinks!? Right tho! Amazing is an overstatement, but they do well when you consider the infrastructure and open air conditions! Cheers
@@nigelparker5886 1
@@atticuspip1481finding faults in videos and criticising them.
اليوم فهمت كيف صنع هؤلاء الناس القنبلة النووية رغم فقرهم. !
impressionnant 💪👍👍
Guys you are doing a good job with limited amount of resources; I guess the life must be cheap in Pakistan as safety gear is non existent - machinist working without safety glasses!!!!!!!!! Loose your eye and the owner gets a new worker - cheap.
These are brilliant people. I am fond of watching such videos whenever I get time. They only need support of government to produce wonderful things.
The keyway is automatically generated, which is awesome!
English is horrible!
lol
Classified manufacturing process.😄
I think this shop has the only Live Center in all of PK
Rolling dead center
The joke is great.....thats my thing!
It's dead.....see the end...welded in
Excelente trabajo amigos saludos de Torreón Coahuila mexico 👍👍
Hola Rodrigo que TAL amigo?
Pues dar un gran salud a todos Los amigos mexicanos, de Algeria,
Skills of man those are limitless
Great stuff regardless of the so called professional comments.....good work guys
At least these guys look like they take care of their equipment, most of the places are outdoors in the dirt and the equipment isn't taken care of very well.
بسیار بسیار عالی جدآ لذت بردم با این ماشین تراش یک چنین شفت کشتی را درست میسازند کار یک ماشین پرفشار را با یک تراس قدیمی و معمولی .
Amazing how they got that square with a 4 jaw chuck. That's some skill!!
If you have good technique then you will be able to true up in a four jaw chuck .
These guys have great , knowledge and skill , bravo 👏👏👏👏👏👏👏👏👏
You guys are amazing ! Great work of art !
ENJOYED THAT LADS , WELL DONE!👍
How many days it tooks🤔🤔
Salam to the hardworking Pakistanis, look the working place , no safety
I bet Curtis would be impressed.
No…the boy would have used a collar around that to support it instead of using timbers
I am amazed that the lathe bearings handle the weight. Steel is amazing material.
from where we can get these shaft?
Olá amigo!! Aonde será usado essa peça?????
Một trục kim loại to lớn có chất liệu thép rất cao, để tiện được thành sản phẩm giá trị cao, thật sự là một thách thức trí tuệ,qua biểu tượng nâng niêu của các bạn cuối cùng bóng sáng,cho thấy các bạn phân kim rất giỏi và rất thông minh, đó mới là trí tuệ ánh sáng, cảm ơn video chia sẻ của bạn rất hay và ý nghĩa, chúc các bạn sức khỏe hạnh phúc thành công.
Amazing what can be done ….quite scary
I was waiting to see the slot milling!
exselente labor por favor graven todo el video el final en donde colocaron esa enorme pieza y para que muchas gracias muy profesional mi respecto
Por lo regular esas enormes piezas son para la industria minera, o barcos, saludos cordiales atte Jesús Gómez torreón coahuila México
Amazing, good job
Impressive skill…..Quite amazing👏💪
I hope that they will install this shaft in the car and it will never break
"In a car"..... what kind of car is that??? An Abrams tank?
good job
What was the total time for this piece to be finished it must of been a week
Months would be my guess as it rusted a few times in the making, and we never seen the milling part.
@@thepubliceye I think that the roof is full of holes as you can see that it's probably raining inside, you can clearly see the water splash on the part.
جزاک اللہ
молодцы, будет турбина для южного потока,
I would be interested in a video that starts from mining the rocks , raw material , to the finished product. That would be cool to see.
Raw. Material comes from russia china
@@GamingStarslegends01 Do you know if there is a video that shows from the mining of the stones (raw material) to the finished product? It would be interesting to see from stone to steel (or whatever metal) product.
In this case and that goes for many steel products in Pakistan, it's mostly salvaged parts from oceangoing freighters/ cruiseschips etc. It says in the title something about a shaft from a ship so that would be the propellorshaft. So then you would have to back to the late '70's or the '80's to first see the ore being mined for this shaft, then being forged and hammered in (probably) a European shipyard and conclusively turned on an even bigger lathe then this😅. Then after 30/40 years sailing across the world the ship's a write off; gets beached on the Pakistani beach and scrapped. And there you have your shaft here in this movie...
i have seen live centers made with the abilites and craftman ship why do you run without one
작업복이 사고나기 딱 좋은 옷 입니다.
특히 선반 작업은 옷을 깔끔하게 입어야 합니다.
옷자락이 감기면 즉사 하기 때문이죠..
Quanta produtividade!!!!....
A FERRAMENTA COME BONITO O AÇO , É RELAXANTE DE SE VER
I like how,he turned themenďmdownmsohe didntmhave to try and centermitmin the clamps
Very good talent
How many man hours would there be in that project
I often would stack 1 inch carbide cutters when ruffing out pieces like these and spend the day on a grain shovel shoveling chips. Ahh, the good old days eh.
Excelente work😉
Great workmen
Mesmerizing ❤
Amazing skills
I could watch those lathes peel metal all day.
How much cast would it be to refine such a huge saft?
They are making ROCKET'S CASING. .
I hope people watching this will understand the cost of the steel material alone that the shop owner has invested in this part. Plus many hours of labor to have it machined correctly. It only take one wrong cut by the machinist to make this into a huge piece of scrap metal. Then the shop owner has to replace the steel and start machine work over again. If this was a 15 ton part to start with in the US thats around $30k or more worth of steel. More if its an alloy. This looked like mild steel forging.
I love 💘 💗
Sorry boss I forgot I was holding the tape on one foot so i could be more,accurate.
Where in this, is the piece of material, shown in the thumbnail? More clickbait.
I'm worried about the CHAIN to carry a15 ton of metal roller😱
yeah, it doesnt look like the chain is large enough to carry such an immensely heavy object...it also depends on the grade the chain has, if it is grade 100 or 120 , of course it will hold much heavier objects than a ordinary grade 80 chain, but if i had to guess, the Indians dont get to use such high grade chains due to the cost, a grade 120 chain, is just much much more expensive than 80 grade....to be able to lift a 15 ton object, i think at least the chain dia should be more than 16mm , preferable 20mm or more...its hard to tell wht diam., chain theyre using here....
Scares me
If I had such a gadget production factory, I would be rich from Elon Musk 😅
Wonderful
I bet they make the shaft first and then the ship to fit it.
Muy buen trabajo.para que es esa pieza.saludos de argentina
by george you do have a live center
Excellent,but I dont belive that shaft smooth due to the slag in the middle which is supported by means of woods.Again good job.
Can only laugh these nimrods. First thing we're taught in a machinist workshop is you NEVER wear long sleeves or loose clothing
BU PARÇA NE İÇİN YAPILDI,NE İŞE YARAR TÜRKİYE DEN SELAMLAR
Parabéns pelo trabalho;
Quantos dias de usinagem foram necessários?
PELO TAMANHO DA GIROMBA, NO MINIMO UMA SEMANA...
Lesson in how to strip bolts!
Next video, on the shop/s Safety for the tradespeople.
Fingers, eyes, toes seem to be intact. My guess is that they pay attention to their surroundings.
Откуда они взяли такую болванку?
Красивая штука получилась.
А для чего она?
Корабельный вал.
@@легычвалерьевич корабельный вал был, или его сделали?
You are not allowed to call the shaft a SHE. You must refer to it as THEY.
This day innovation and people “who now how to “ will prevail
Шикарная железяка, молодцы ребята! А почему не показали как пазы делали?
Этот вал и так точили несколько дней. Не все успели заснять.
@@ruslans8033 Вот так всегда, на самом интересном месте... (с)
Ну не знаю, ребята на видео конечно прикольные, но восхищаться чёт не получается. Россия уже 60 лет газовые центрифуги делает, а тут чего?
@@shagrov1 а тут работа на станке сто летней давности и измерение сто летними методами и инструментами + все одним резцом. Вот это и восхищает. Чпу это пшик, а ручная работа это самая суть нашего дела.
Пазы - это закрытые технологии, а у нас допуска нет....
As long as it looks good right...
How do they cut the metal, using no lubricating oil? How do the cutting blades stay sharp and cool enough?
Carbide cutting tips.
En dat allemaal op Engels machinebouw 😅😊🎉
Do you mean 15 Tons. Metric I suppose. Dictionary available ? Spell check on Computer ?
they must be very lucky that no accident has occurred it is very heavy, the axle should have had other bases and I should have taken safety measures
Immaculate jobs coming out of that ancient old factory highly-qualified diligent hsrf eorking men .
Heavy and semi heavy engineering is now becoming very prevalent in Pakistan
The great thing is that it is being driven primarily by the private sector
Where are the safety glasses! And what’s with the loose clothing? Jeez.
Техника безопасности, не не слышал)
👍 machinists
شيء رائع وتعاونوا على البر والتقوى. قطعة هائلة من الحديد على ما يبدو أنها ليست من الحديد الصلب من خلال لمعانها يا ريت لو تكون بعض التفاصيل على محتواها شكرا 👍🇲🇦
Kind of spoils the vid, showing the finished product first.
I hope they secured it before driving away!
Cuántas horas se usó para tener esa pieza completa? How of machine/hours spend to complete this beautiful work?
Good
BRASIL 👍👍👍
Did not see them cut key ways in