What a great project! I love the way you overlapped the 2 parts, it's a very striking piece. Thank you so much for sharing. I ordered some cutters from Polymeralia a while back and was very pleased with the service and products. :-)
La pasta que se hace de forma casera no es igual que la arcilla polimérica, ya que seca al aire y la arcilla polimérica hay que hornearla. La verdad es que nunca he utilizado esas pastas y no sé si podrá funcionar esta técnica
Hola, felicidades por el tutorial. Una pregunta, ¿Dónde puedo comprar ese cortador? Estoy buscando este modelo y el ques un triángulo con los lados curvados, como si fuera una púa de guitarra. Espero que puedan ayudarme. Muchas gracias.
hola me ha encantado tu trabajo yo queria preguntarte donde se puede comprar las plantillas y los cortadores gracias de antemano y cuando le pones la pintura sobre la arcilla la dejas secar o no un saludo
Thank you, very pretty! I have 2 questions ;) How long did the acrylic paint take to dry before you can cut out the shape? And you don't need to varnish it, the colour do stay after baking without?
It doesn't take long to dry, as you apply a very thin coat. I do not usually varnish the pieces and have had no problem with the paint. If you want to, you can use a matte varnish, or apply a thin coat of liquid clay with your finger and bake it again.
Hi there, I enjoyed this tutorial so much, but I have a question? What sizes are the cutters you use for the cutting? Are they the same size, but one is a rounded square and one a rounded triangle?? I want to make one, but, it's not looking right with the cutters I have, I would like to order the right sizes if you can tell me (in english) what these that you used are? Thank you so much, I love how wonderful they are, Sincerely, Joy :) In english please!
new to silkscreen....my previous experience has been the pattern sticking to the clay and tearing it all apart. I use Kato and any suggestions would be helpful. thank-you
Try to use a harder clay. Although you shouldn't have any problem with Kato, but perhaps it was too hot when you tried. To make the clay less sticky you can try to place a thin sheet of clay between two pieces of paper and let it for some minutes to leach. Don't let it set too much or it will become brittle. Hope this advice is helpful for you.
Hola! En este caso lo hice de dos formas distintas: en el que tiene el fondo negro le pegué con pegamento por detrás una fornitura metálica, y en el magenta le hice un orificio con un taladro manual una vez horneado. Aquí puedes ver un vídeo que hice hace tiempo sobre distintas maneras de montar nuestros colgantes, por si te ayuda: ruclips.net/video/iIuMvfHMZGo/видео.html
![Polymer clay sugar skull tutorial [ENG SUB] | ELEOJOTA00 | HALLOWEEN](http://i.ytimg.com/vi/vTCpFAejHLc/mqdefault.jpg)
![Polymer clay sugar skull tutorial [ENG SUB] | ELEOJOTA00 | HALLOWEEN](/img/tr.png)
![Polymer clay silkscreen jewelry set [ENG SUB] | ELEOJOTA00 | POLYMER CLAY TUTORIAL](http://i.ytimg.com/vi/rmJg4f9TW8E/mqdefault.jpg)
![Faux wood - Polymer clay rings - Tutorial [Sub] | Ana Belchí](/img/1.gif)
Precioso colgante y gracias por enseñar técnicas tan bonitas.
This was beautiful. You are truly a very talented young lady! Please make MORE jewelry tutorials - you are the BEST!!!!
Realmente una preciosura!!!! Felicitaciones desde Argentina. Me encanto!!!!!!
Gracias!!!
Que trabajo más precioso!!! Me ENCANTO......👍👍👍
What a great project! I love the way you overlapped the 2 parts, it's a very striking piece. Thank you so much for sharing. I ordered some cutters from Polymeralia a while back and was very pleased with the service and products. :-)
Wow! I wasn’t expecting it to look that gorgeous! Beautifully done!!
Thank you very much!!!❤
Hermoso trabajo, me encantan tus videos. Gracias por compartir
That was a wonderful idea you shared, and I thank you for it. You did a beautiful job!
Very simple but clever design, and so beautiful! Thank you for sharing!
Thank you!
Hola, fantástico vídeo...esplicato muy bien.
Quería saber donde compraste los cortadores que utiliza en esto vídeo.
Gracias por compartir
😘
Hola, los cortadores son de Polimeralia, y ahora mismo ya no están a la venta 😥 Muchas gracias por ver el vídeo
eleojota00 vale Gracias 😊
Love this so much!!!!
Excellent tutorial!They look pretty
Where do I find the cutters you used? I’m having trouble finding them. I love your work. Thank you.
waoo, que hermosura
Neyvis Cot Gracias!!!
Thank you I love this.
Thank you!!!
Great tutorial thank you for your time 👍🏻❤️
Silkscreen is a type of stencil? What is it? Plz answer🧡
Merci beaucoup pour le tuto bonne continuation
Muy bueno! una pregunta se puede realizar lo mismos productos con arcilla polímerica CASERA?? Gracias saludos
La pasta que se hace de forma casera no es igual que la arcilla polimérica, ya que seca al aire y la arcilla polimérica hay que hornearla. La verdad es que nunca he utilizado esas pastas y no sé si podrá funcionar esta técnica
Hola, felicidades por el tutorial.
Una pregunta, ¿Dónde puedo comprar ese cortador? Estoy buscando este modelo y el ques un triángulo con los lados curvados, como si fuera una púa de guitarra. Espero que puedan ayudarme. Muchas gracias.
Superbe j'adoreeeeeeeeee , mille bravo et mille merci !!!
Hermoooooosooooooooossss!!!!
Alucino
Elegant 💖
Me encantó 😆😆😆
hola me ha encantado tu trabajo yo queria preguntarte donde se puede comprar las plantillas y los cortadores gracias de antemano y cuando le pones la pintura sobre la arcilla la dejas secar o no un saludo
maria jesus fernandez garcia puedes comprar en conadearte.com
Gracias por tu ayuda un saludo
Thank you, very pretty! I have 2 questions ;) How long did the acrylic paint take to dry before you can cut out the shape? And you don't need to varnish it, the colour do stay after baking without?
It doesn't take long to dry, as you apply a very thin coat. I do not usually varnish the pieces and have had no problem with the paint. If you want to, you can use a matte varnish, or apply a thin coat of liquid clay with your finger and bake it again.
Thank you very much! :) So I will try without because I don't like it not really when polymer clay is varnished...
Love it thank you
Beautiful!
Thank you!
🥰🥰🥰
Genial !
Hi there, I enjoyed this tutorial so much, but I have a question? What sizes are the cutters you use for the cutting? Are they the same size, but one is a rounded square and one a rounded triangle?? I want to make one, but, it's not looking right with the cutters I have, I would like to order the right sizes if you can tell me (in english) what these that you used are?
Thank you so much, I love how wonderful they are, Sincerely, Joy :) In english please!
The square cutter is about 5 cm wide and the base of the triangle cutter is the same size. Thanks for watching!
WoooooW !!!!
bello me encanta el pendant, donde puedo conseguir el silkscreen?
delia toro en conadearte.com
Soy de mexico donde podré comprar la plantilla
Beautiful!!!
Nancy H thank you!!!
new to silkscreen....my previous experience has been the pattern sticking to the clay and tearing it all apart. I use Kato and any suggestions would be helpful. thank-you
Try to use a harder clay. Although you shouldn't have any problem with Kato, but perhaps it was too hot when you tried. To make the clay less sticky you can try to place a thin sheet of clay between two pieces of paper and let it for some minutes to leach. Don't let it set too much or it will become brittle. Hope this advice is helpful for you.
Yes, very helpful. Thank you.
Loved it 😍bello
hey! It's a very nice video! can you tell me the brand of that beautifull silk screen?
They are from Polymeralia shop on etsy. You can find them here: www.etsy.com/es/shop/Polymeralia?ref=s2-header-shopname
eleojota00 thank you so much!!!
Hi where can I purchase the silk screen from?
janet jeffries I bought it at conadearte.com
Buenas, estoy empezando con la arcilla polimérica y no entiendo en qué momento colocas los ganchos porque no veo cómo haces los agujeros!
Gracias
Hola! En este caso lo hice de dos formas distintas: en el que tiene el fondo negro le pegué con pegamento por detrás una fornitura metálica, y en el magenta le hice un orificio con un taladro manual una vez horneado. Aquí puedes ver un vídeo que hice hace tiempo sobre distintas maneras de montar nuestros colgantes, por si te ayuda: ruclips.net/video/iIuMvfHMZGo/видео.html
Hola, que tal? ¿Podrías decirme qual la diferencia entre silk screen e stelcil? Gracias.
El silkscreen es muy parecido a un stencil, pero en los espacios abiertos tiene una especie de malla muy finita que deja pasar la pintura.
Gracias.
eleojota00 , gracias.
beautiful
buy bueno