In this video, I demonstrate the following: 1. What is Logic Remote? 2. How to connect an iPad or iPhone with Logic Remote. 3. How to use Logic Remote as a mixing control surface. 4. How to use Logic Remote as a Smart Controls controller. 5. How to use Logic Remote as a remote control for recording. 6. How to use Logic Remote to build patterns in the step sequencer. 7. How to use Logic Remote to build chord progression using Chord Strips. 8. How to use Logic Remote to control Live Loops. Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor For mixing/mastering work, contact me at my website | carneymediagroup.com Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy Support the channel on Patreon | patreon.com/musictechhelpguy Timestamps: 0:00 What is Logic Remote? 1:21 Sponsor Segment 1:58 Connect Logic Remote 3:17 Mixing Control Surface 11:17 Smart Controls 15:29 Remote Recording, Key Commands 18:30 Step Sequencer 20:27 Chord Strips 24:12 Live Loops
You’re seriously so amazing for these videos. You really started grinding the hell out of explaining logic and I’m so thankful because I’m more of a monkey see monkey do type of learner, rather than a manual reader. I can’t thank you enough for sharing this for free 🎉❤ I don’t have the cash to be paying for lessons so it’s truly appreciated
Yep, I've watched every one of the first 35 videos all the way through and have worked through a lot of stuff. Thanks so much for this excellent series!
Some time around 25 minutes of this video you say „… incredibly helpful …“ and that‘s true for me for almost the whole video except the part at the end dealing with Live Loops. I haven’t dealt with those so far and probably won‘t deal with that topic as long as I‘m not firm with the actual Logic. Thanks for video #35. I‘ve seen them all from 1 to 35 and will watch the oncoming ones as well!
This is so great. Thank you so much! These video tutorials really helped me finally making the change and moving on from my old Roland VS-1680 workstation to Logic Pro. I will come back to them a lot, I guess. Keep up the good work!!
Thank you for making these videos. This series was very informative and I learned a lot of tiny details that I didn’t know, even though I’ve been using logic for 10 years. I’m looking forward to the rest of the series. Since you seem to know everything 😀 I’ve got a more advanced question. Is there a way to eliminate guitar string noise, or squeeks, made by chord changes (sliding up or down the neck)? Sometimes my electric guitar take is great, but it’s ruined by my sliding fingers. By the way, I enjoyed last month‘s Q&A. You should do more of these, ex : 5 or 6 questions per videos.
Thanks a lot for this brilliant tutorial : I re-discover my iPad today ! It opens real new possibilities and makes it far more ludic 😎🙏👍 Go on making such clever videos !
My 2015 iPad runs this application just fine. I've always wanted a "hardware" midi controller that interfaces with Logic Pro X, but I guess all I needed was a solid iOS application.
The Record function is extremely limited. Why not let you edit audio from the ipad? If I'm recording from my vocal booth and need to comp on the go, I'm pretty much screwed...
Very helpful video! I've got a refurbished iPad mini 4 on the way, I think this is the solution I've been looking for. I use a StreamDeck XL at my studio desk that can handle many of these same tasks, but I mostly needed something to bring with me to the drums so I can quickly re-do a take. I'm sure I'll find plenty more uses for it as well.
Hi there, thanks a lot for this very interesting video! I learned a lot, and it is very clear and well explained. However, I am having a small issue and was looking for this information but it is not mentionned in your video. I am using Logic remote with my Iphone, and I want to connect a Hardware midi device to my Iphone, and simply send midi clock to it, but my computer doesn't recognize the midi interface (an IRig) when connected to the Iphone while it does when directly plugged to the computer. How can I control hardware midi devices directly from Logic Remote? (I mean physically connected to the remote, but not from the computer).
I connected Logic Remote yesterday and it worked fine. I can run an xlr cable to a remote location to do my recording. I guess I will need a long cable for the headphones too unless there is a way to send audio to my ipad.
Unfortunately, no way to get audio from the iPad, I believe. But even if you could there would be a noticeable delay. Get a small headphone amplifier box, then you can run a TRS or XLR cable to the box, keep the signal balanced to reduce noise in the headphone mix, and then plug your headphones into the headphone amp.
Hey man, thank you for what you do it helps a lot of people. I have a problem my ipad doesn't seem to be able to map correctly to Logic, is not controlling the correct channel tracks, if I move the fader 1 for example, on logic in my mini the fader that moves is fader 25, and when I move any other fader it moves any other random fader except the one I want. Is there a way that I can properly map the fader functions so I can control it like if I where controlling a mixer? Thank you for your help.
Great video but no one talks about acessing third party vst presets through Logic Remote. I have Arturia Analog Lab 4 presets and none of them show up in Logic Remote. Any ideas? Thank you!
Josh, terrific video. Can I use the iPad remote to automate various features of plugins - for example, let's say I only wanted to automate the mix level of a plugin, or one feature of a plugin (maybe one parameter of a third-party saturation plugin) that I'm using as a send, can I do that via the faders on iPad Logic remote? Thanks.
I've been researching the best expression and dynamics fader for use in Logic with the Spitfire Heirlooms software. Their demo video shows the Nuances fader which looks great but is a bit pricey and is hand-built in France and the stock is currently depleted. I was wondering if I could use Logic Remote to accomplish this.
Can you elaborate on Logic Remote’s usefulness in the Drummer section of the program getting deep into the x/y pad to craft lots of drummer regions that have their own twist to the drum writing and also converting to MIDI regions to fine tune even more as well the Producer kits?
Many thanks for this…! At @5:33 the iPad displays the selected plugin’s GUI. However, my iPad only shows the Editor Mode and not the plugin’s GUI. Any workaround to this? Thanks…! (Logic Pro X: version 10.6.3 on Macbook Pro OSX Catalina 10.15.7 iPad (9th gen): Logic Remote version 1.5.3 on iPad 9th gen iOS 15.6.1)
Is there any chance to use with a android tablet? I see some videos from some people using avid control app, but still not any clear answer with both works in android tablet
Hey everyone, just a quick reminder. If you use Logic Remote on your iPhone, when you turn it to landscape mode all the rest of the control features show up!👍🏼
Great video - I tried Logic Remote and on the mixer screen the faders for software instruments don't move the faders in logic unless I select automation to off (they don't work in 'read'). I notice in your video the tracks are set to read and the faders are working. For me, everything else works including faders on audio tracks and busses - so I don't know why midi tracks on read aren't working?! If you have any ideas I'd be very grateful to get this working as it seems awesome otherwise!
You’re a great teacher, a great speaker a great explainer and an all around great human. And thank you for the yellow arrows. They’re so helpful. I do have a question. At 10:15 your tracks at the end are in the red. Is that ok or if I see that should I back the faders down some? Also, I’ve heard that if you’re using an older version of a MacOS, that if you update Logic Remote, you can brick the whole thing because it isn’t backwards compatible.. Does that mean I should never update it? I’m running a 2011 MBP, MacOS High Sierra 10.13.6 and cannot update my OS any further. I’m also using Logic Pro X 10.3 and don’t think I can even update that any further. I refuse to buy a new laptop lol. I’ve upgraded the one I have with SSD and maxed out RAM and I love it. Going to replace battery soon since I’m over 1400 cycles. Battery still last a while tho. Anyhow, I’m scared to death of updating Remote and I’ve tried my best to make sure automatic updates are turned off. INSTANT SUB. 😊
There is one track that is clipping in that example. It's the one with the clip light at the top. Logic's meters are a bit confusing... they use orange at the top for the clip light, but the top of the meter is red. So having red in the top of the meters doesn't necessary means that you're clipping, only if you see the clip light turn on. It's possible that your version of Logic is not compatible with future versions of Logic Remote. While I have not seen this myself, I would just stick to the version that is currently working for you. I had a similar experience with my Behringer X18 and the X-Air iPad app.
How I can take the sound out from the Remote, so I wouldn't need my headphones to be connected with the DAW or the workstation, if I record from another place?
Does anyone know how you expand folders using Logic Remote, so you can reduce or expand only a certain section of tracks. I can do it in Logic and it reflects on Logic Remote, but haven't figured out how to do the same on the Logic Remote app.
Hi Josh, At 17:00, Remote Recording, where is your mic? Wouldn’t it still have to be connected to your interface? It would be great if a mic could be sent to the iPad and one could record in a separate room. I guess that’s wishful thinking on my part. (I have a soundproof room in my basement that would be ideal) Anyway, another great tutorial! I have Logic Remote on my iPhone but had no idea it could do so much. Thanks, Gianni PS: Glad to hear there are more videos to come.
The mic is connected to my interface. You wouldn’t want it to be like a thunderbolt/USB on the iPad because the compression applied to the audio and latency would be inadequate for recording. I have a stage box that runs through the wall to the next room. For your situation you could just get 100 foot XLR cable and run it down if there’s enough length. Or drill a hole in the wall and find a way to route it down through the walls to the basement.
@@MusicTechHelpGuy That made me laugh out loud! 😁 But probably would work. No, I understand all the latency and compression issues. Now if I had a MacBook running Logic…. Nah. I also think my partner would disapprove of me running cable to the basement. My setup works fine. Plenty of carpeting and throw rugs - I’m not famous yet. 😉
Got a Question for you Mr Techguy….is it possible to drag and drop individual slices from the Quick sampler in the Ultrabeat? If so could you do a video on it?
Quick Sampler to Ultrabeat, no, not easily. You could load up Quick Sampler as a PAD in Drum Machine Designer though? But honestly if you're really set on using UB, you might just grab the audio file from Quick Sampler, chop it up manually, and then add it to Ultrabeat or DMD, then it would just be drag and drop.
Everytime I connect to my ipad it works fine, then after few seconds it gets disconnected and if I see the Control Surface Setup it put Exclamation mark on the Ipad .. Can anyone help
Hi, I had a little issue with my Logic and wanted to know if you could help me with that. So, I'm trying to record MIDI percussion, using the native library that comes with Logic, but when I load the "Blocks and Bells Performance" patch, and I load "Sampler" in "Multi output" mode, it doesn't assign the single instruments such as Jamblocks and Cowbells to the right outputs, it all stills coming from the main outputs, I already checked than all the Groups Outputs into Sampler where assigned correctly, but it doesn't seems to work. I found it weird because when I do the exact same process with the "Conga Performance" and "Timbales Performance" patches, it does recognize all the assigned outputs in "Sampler" and it works perfectly, I hope you guys can help me!
I actually think, that it misses a paramount element to be considered good. It’s okay for these more fun kinda stuff. But recording acoustic guitar or vocals by yourself in the booth is somewhat of a hassle compared to the Cubase solution. It lacks the possibility of viewing the tracks and arrangement window of the Logic DAW. When switching from Cubase to this, you feel that lack in an instant. You have no visual overview of where you are, where to record etc. It’s so non-intuitive that I find it hard to believe, that it’s an Apple product. It’s so fantastic to be able to see the whole arrange window and being able to select places to record. And also the regret-button is a weak point. You cannot really see, if it deleted the take or not. You just have to trust, that pushing that “back button” deletes the take, because you cannot see it. And to put that trust into an app, that sometimes doesn’t really respond when pushing the record button, is not entirely free of questioning, whether it did or not. Pushing two times might do harm to what else has been done in the session. And why is the regret-button placed such a weird place? It should be visible at all time. Sometimes I wonder, who these people are, for whom it seems impossible to make a well-thought out product.
Hey You have some knowledge about logic any chance how to do this (what he is doing in Ableton)in Logic???: ruclips.net/video/Fp_ZQpTLOqc/видео.html to adjust Start and end points of the sample in the audio editor but keep it locked in the arrangement like in the linked video??? Please help!! Thanks for your content.
Unfortunately, Logic doesn't have the ability to freely slip edit like that. But there is a Slip by Nudge Value shortcut that does the same thing, it's just a little more work and not quite as quick and easy to do as in Live. You can press Control Option Left or Right to slip the contents of a region left or right, but the amount it is shifted in the region is based on the nudge value you select in the toolbar.
I don't get it... Why the forced use of Wifi.. It's like tracking 101.. Never turn on wifi while tracking. it has to stop and record and playback that's it... who cares about using an Ipad to touch faders? It's a DAW. you don't want to ride faders by hand anyway.. Man these software designers are dumb. thx for the video though..
How would it connect to the computer and the DAW without having any internet connection? And for me its more about the versatility of having an interface that directly talks to a Daw, while also serving the functionality of a tablet. Obviously you can spend hundreds or thousands on midi controllers and gear to have physical control over the mix. But why not have a tablet like an iPad serve multiple functions including still working as a tablet when you are not recording?
In this video, I demonstrate the following:
1. What is Logic Remote?
2. How to connect an iPad or iPhone with Logic Remote.
3. How to use Logic Remote as a mixing control surface.
4. How to use Logic Remote as a Smart Controls controller.
5. How to use Logic Remote as a remote control for recording.
6. How to use Logic Remote to build patterns in the step sequencer.
7. How to use Logic Remote to build chord progression using Chord Strips.
8. How to use Logic Remote to control Live Loops.
Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor
For mixing/mastering work, contact me at my website | carneymediagroup.com
Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy
Support the channel on Patreon | patreon.com/musictechhelpguy
Timestamps:
0:00 What is Logic Remote?
1:21 Sponsor Segment
1:58 Connect Logic Remote
3:17 Mixing Control Surface
11:17 Smart Controls
15:29 Remote Recording, Key Commands
18:30 Step Sequencer
20:27 Chord Strips
24:12 Live Loops
You’re seriously so amazing for these videos. You really started grinding the hell out of explaining logic and I’m so thankful because I’m more of a monkey see monkey do type of learner, rather than a manual reader. I can’t thank you enough for sharing this for free 🎉❤ I don’t have the cash to be paying for lessons so it’s truly appreciated
Your channel is awesome. Clear, direct explanation of deep topics in Logic. Thank you!
Yep, I've watched every one of the first 35 videos all the way through and have worked through a lot of stuff. Thanks so much for this excellent series!
All this new age making of music is quite miraculous. Thank you for explaining so much of it.
We need to thank you once again for the magnificent work at this breaking point going from basic to advanced.
Some time around 25 minutes of this video you say „… incredibly helpful …“ and that‘s true for me for almost the whole video except the part at the end dealing with Live Loops. I haven’t dealt with those so far and probably won‘t deal with that topic as long as I‘m not firm with the actual Logic. Thanks for video #35. I‘ve seen them all from 1 to 35 and will watch the oncoming ones as well!
What do you mean Garage Band has them too
Thank you so much. By far, the best run through on Logic Remote.
Great video, many thank.
In Logic Remote :
- Is it possible to define CC ?
- to change articulation ?
- To define a bunch of CC for an AU ?
Best
Cyril
This is so great. Thank you so much! These video tutorials really helped me finally making the change and moving on from my old Roland VS-1680 workstation to Logic Pro. I will come back to them a lot, I guess. Keep up the good work!!
This changes everything in my life.
Thank you for making these videos. This series was very informative and I learned a lot of tiny details that I didn’t know, even though I’ve been using logic for 10 years.
I’m looking forward to the rest of the series.
Since you seem to know everything 😀 I’ve got a more advanced question. Is there a way to eliminate guitar string noise, or squeeks, made by chord changes (sliding up or down the neck)? Sometimes my electric guitar take is great, but it’s ruined by my sliding fingers.
By the way, I enjoyed last month‘s Q&A. You should do more of these, ex : 5 or 6 questions per videos.
Thanks a lot for this brilliant tutorial : I re-discover my iPad today ! It opens real new possibilities and makes it far more ludic 😎🙏👍 Go on making such clever videos !
My 2015 iPad runs this application just fine. I've always wanted a "hardware" midi controller that interfaces with Logic Pro X, but I guess all I needed was a solid iOS application.
The Record function is extremely limited. Why not let you edit audio from the ipad? If I'm recording from my vocal booth and need to comp on the go, I'm pretty much screwed...
As always, a great tutorial! Thank you!
Very helpful video! I've got a refurbished iPad mini 4 on the way, I think this is the solution I've been looking for. I use a StreamDeck XL at my studio desk that can handle many of these same tasks, but I mostly needed something to bring with me to the drums so I can quickly re-do a take. I'm sure I'll find plenty more uses for it as well.
Thank you so much for this course 👍🏻👍🏻
Thank you so much for your magnificent video. Thank you sooooooooo much.
Hi there, thanks a lot for this very interesting video! I learned a lot, and it is very clear and well explained. However, I am having a small issue and was looking for this information but it is not mentionned in your video. I am using Logic remote with my Iphone, and I want to connect a Hardware midi device to my Iphone, and simply send midi clock to it, but my computer doesn't recognize the midi interface (an IRig) when connected to the Iphone while it does when directly plugged to the computer. How can I control hardware midi devices directly from Logic Remote? (I mean physically connected to the remote, but not from the computer).
Nice videos. Love the way you teach this topics!
Goated intro
Thank you a lot! DAW It is free of charge at Google Play now🎉❤
I connected Logic Remote yesterday and it worked fine. I can run an xlr cable to a remote location to do my recording. I guess I will need a long cable for the headphones too unless there is a way to send audio to my ipad.
Unfortunately, no way to get audio from the iPad, I believe. But even if you could there would be a noticeable delay. Get a small headphone amplifier box, then you can run a TRS or XLR cable to the box, keep the signal balanced to reduce noise in the headphone mix, and then plug your headphones into the headphone amp.
Man your videos are so helpful
Thanks for the video I admire the dedication and because I’ve started using logic over ableton
Hey man, thank you for what you do it helps a lot of people. I have a problem my ipad doesn't seem to be able to map correctly to Logic, is not controlling the correct channel tracks, if I move the fader 1 for example, on logic in my mini the fader that moves is fader 25, and when I move any other fader it moves any other random fader except the one I want. Is there a way that I can properly map the fader functions so I can control it like if I where controlling a mixer?
Thank you for your help.
Very much appreciated. This series is great. ✌️🇦🇺
Super helpful thanks for making this - Question, does it work with third party plugins?
Great video but no one talks about acessing third party vst presets through Logic Remote. I have Arturia Analog Lab 4 presets and none of them show up in Logic Remote. Any ideas? Thank you!
Josh, terrific video. Can I use the iPad remote to automate various features of plugins - for example, let's say I only wanted to automate the mix level of a plugin, or one feature of a plugin (maybe one parameter of a third-party saturation plugin) that I'm using as a send, can I do that via the faders on iPad Logic remote? Thanks.
Hello, is there a maximum of 4 sends or you can go further ? :) Thanks 🙂
Logic has 256 busses that can be assigned to sends. Logic will add additional send slots if you use more than 4.
@@MusicTechHelpGuy Thanks a lot, that is good to know 💯
That’s awesome just!
I've been researching the best expression and dynamics fader for use in Logic with the Spitfire Heirlooms software. Their demo video shows the Nuances fader which looks great but is a bit pricey and is hand-built in France and the stock is currently depleted. I was wondering if I could use Logic Remote to accomplish this.
Can u use 2 iPads to extend this so you have full view of mixer ?
I love the iPad as a control surface.
02:28 looks like you got 47,939 unread mails in your inbox 😂😂
If u have homepods can u please check that
IF *LOGIC X PRO’s* AUDIO AIRPLAYS TO HOMEPODS!?
Can you elaborate on Logic Remote’s usefulness in the Drummer section of the program getting deep into the x/y pad to craft lots of drummer regions that have their own twist to the drum writing and also converting to MIDI regions to fine tune even more as well the Producer kits?
Many thanks for this…! At @5:33 the iPad displays the selected plugin’s GUI. However, my iPad only shows the Editor Mode and not the plugin’s GUI. Any workaround to this? Thanks…!
(Logic Pro X: version 10.6.3 on Macbook Pro OSX Catalina 10.15.7
iPad (9th gen): Logic Remote version 1.5.3 on iPad 9th gen iOS 15.6.1)
Does it have multitouch where you can move multiple faders at the same time?
Great....as always!
Is there any chance to use with a android tablet? I see some videos from some people using avid control app, but still not any clear answer with both works in android tablet
Hey everyone, just a quick reminder. If you use Logic Remote on your iPhone, when you turn it to landscape mode all the rest of the control features show up!👍🏼
A very important point 😂
Great video - I tried Logic Remote and on the mixer screen the faders for software instruments don't move the faders in logic unless I select automation to off (they don't work in 'read'). I notice in your video the tracks are set to read and the faders are working. For me, everything else works including faders on audio tracks and busses - so I don't know why midi tracks on read aren't working?! If you have any ideas I'd be very grateful to get this working as it seems awesome otherwise!
You’re a great teacher, a great speaker a great explainer and an all around great human. And thank you for the yellow arrows. They’re so helpful. I do have a question. At 10:15 your tracks at the end are in the red. Is that ok or if I see that should I back the faders down some? Also, I’ve heard that if you’re using an older version of a MacOS, that if you update Logic Remote, you can brick the whole thing because it isn’t backwards compatible.. Does that mean I should never update it? I’m running a 2011 MBP, MacOS High Sierra 10.13.6 and cannot update my OS any further. I’m also using Logic Pro X 10.3 and don’t think I can even update that any further. I refuse to buy a new laptop lol. I’ve upgraded the one I have with SSD and maxed out RAM and I love it. Going to replace battery soon since I’m over 1400 cycles. Battery still last a while tho. Anyhow, I’m scared to death of updating Remote and I’ve tried my best to make sure automatic updates are turned off. INSTANT SUB. 😊
There is one track that is clipping in that example. It's the one with the clip light at the top. Logic's meters are a bit confusing... they use orange at the top for the clip light, but the top of the meter is red. So having red in the top of the meters doesn't necessary means that you're clipping, only if you see the clip light turn on. It's possible that your version of Logic is not compatible with future versions of Logic Remote. While I have not seen this myself, I would just stick to the version that is currently working for you. I had a similar experience with my Behringer X18 and the X-Air iPad app.
What model of ipad can you recommend? Could it be an old model?
As long as the iPad satisfies the current iOS version requirement of Logic Remote
This is currently iPad OS 14 or greater
How I can take the sound out from the Remote, so I wouldn't need my headphones to be connected with the DAW or the workstation, if I record from another place?
Thank you
Does anyone know how you expand folders using Logic Remote, so you can reduce or expand only a certain section of tracks. I can do it in Logic and it reflects on Logic Remote, but haven't figured out how to do the same on the Logic Remote app.
Superb
47,939 unread emails! 🤣
Great tutorial, though! Thanks!
Hi Josh,
At 17:00, Remote Recording, where is your mic? Wouldn’t it still have to be connected to your interface? It would be great if a mic could be sent to the iPad and one could record in a separate room. I guess that’s wishful thinking on my part. (I have a soundproof room in my basement that would be ideal)
Anyway, another great tutorial! I have Logic Remote on my iPhone but had no idea it could do so much.
Thanks,
Gianni
PS: Glad to hear there are more videos to come.
The mic is connected to my interface. You wouldn’t want it to be like a thunderbolt/USB on the iPad because the compression applied to the audio and latency would be inadequate for recording. I have a stage box that runs through the wall to the next room. For your situation you could just get 100 foot XLR cable and run it down if there’s enough length. Or drill a hole in the wall and find a way to route it down through the walls to the basement.
@@MusicTechHelpGuy That made me laugh out loud! 😁 But probably would work. No, I understand all the latency and compression issues. Now if I had a MacBook running Logic…. Nah. I also think my partner would disapprove of me running cable to the basement. My setup works fine. Plenty of carpeting and throw rugs - I’m not famous yet. 😉
Got a Question for you Mr Techguy….is it possible to drag and drop individual slices from the Quick sampler in the Ultrabeat? If so could you do a video on it?
Quick Sampler to Ultrabeat, no, not easily. You could load up Quick Sampler as a PAD in Drum Machine Designer though? But honestly if you're really set on using UB, you might just grab the audio file from Quick Sampler, chop it up manually, and then add it to Ultrabeat or DMD, then it would just be drag and drop.
Any idea how to make wired connection?
Kiitos!
The smart controls don‘t show up on the iphone. What am I doing wrong?
Everytime I connect to my ipad it works fine, then after few seconds it gets disconnected and if I see the Control Surface Setup it put Exclamation mark on the Ipad .. Can anyone help
Hi, I had a little issue with my Logic and wanted to know if you could help me with that.
So, I'm trying to record MIDI percussion, using the native library that comes with Logic, but when I load the "Blocks and Bells Performance" patch, and I load "Sampler" in "Multi output" mode, it doesn't assign the single instruments such as Jamblocks and Cowbells to the right outputs, it all stills coming from the main outputs, I already checked than all the Groups Outputs into Sampler where assigned correctly, but it doesn't seems to work. I found it weird because when I do the exact same process with the "Conga Performance" and "Timbales Performance" patches, it does recognize all the assigned outputs in "Sampler" and it works perfectly, I hope you guys can help me!
Is it failing to recognize certain instruments’ transients? Have you tried pushing the gain a bit more?
I actually think, that it misses a paramount element to be considered good. It’s okay for these more fun kinda stuff. But recording acoustic guitar or vocals by yourself in the booth is somewhat of a hassle compared to the Cubase solution. It lacks the possibility of viewing the tracks and arrangement window of the Logic DAW. When switching from Cubase to this, you feel that lack in an instant. You have no visual overview of where you are, where to record etc. It’s so non-intuitive that I find it hard to believe, that it’s an Apple product. It’s so fantastic to be able to see the whole arrange window and being able to select places to record. And also the regret-button is a weak point. You cannot really see, if it deleted the take or not. You just have to trust, that pushing that “back button” deletes the take, because you cannot see it. And to put that trust into an app, that sometimes doesn’t really respond when pushing the record button, is not entirely free of questioning, whether it did or not. Pushing two times might do harm to what else has been done in the session. And why is the regret-button placed such a weird place? It should be visible at all time. Sometimes I wonder, who these people are, for whom it seems impossible to make a well-thought out product.
Hey You have some knowledge about logic any chance how to do this (what he is doing in Ableton)in Logic???:
ruclips.net/video/Fp_ZQpTLOqc/видео.html
to adjust Start and end points of the sample in the audio editor but keep it locked in the arrangement like in the linked video???
Please help!! Thanks for your content.
Unfortunately, Logic doesn't have the ability to freely slip edit like that. But there is a Slip by Nudge Value shortcut that does the same thing, it's just a little more work and not quite as quick and easy to do as in Live. You can press Control Option Left or Right to slip the contents of a region left or right, but the amount it is shifted in the region is based on the nudge value you select in the toolbar.
Oh no it doesn’t work with 6th gen iPad any more that’s what I’ve got ,wish I’d downloaded it earlier
Are you sure? Seems like the 6th gen iPad can be updated up to iPadOS 17 and the requirement for Logic remote is only iOS 14
It looks like you have 47,000 emails
I don't get it... Why the forced use of Wifi.. It's like tracking 101.. Never turn on wifi while tracking. it has to stop and record and playback that's it... who cares about using an Ipad to touch faders? It's a DAW. you don't want to ride faders by hand anyway.. Man these software designers are dumb. thx for the video though..
How would it connect to the computer and the DAW without having any internet connection? And for me its more about the versatility of having an interface that directly talks to a Daw, while also serving the functionality of a tablet. Obviously you can spend hundreds or thousands on midi controllers and gear to have physical control over the mix. But why not have a tablet like an iPad serve multiple functions including still working as a tablet when you are not recording?
Your videos have what's kept me trying to make my magic happen. I'll never be able to thank you enough 🫂