Yes, I used a magnet. You could also try using a clip of some sort, but I would recommend a magnet. Also, to support the weight of the front, the magnet needs to be strong, or else it will keep hanging down.
You'd be surprised at how much access people have to those kinds of equipment, like highschool kids can work on one after school in tech ed shops or at my college there is a workshop with any professional equipment you can think of, so it would be very nice if there was a tutorial, asking nicely from one prop artist to another
The create a resin composite of the two halfs and bore out the "center" as much as you need to insert and small piece of plexiglass. Grab yourself a transparency sheet and print out the meter display. Mount some white leds behind it from the (hopefully fabricated in the handle) battery power source and your're good to go.
You could have used rare earth magnets (cheap online) that are small and circular and create a better hold. Also, I might advise frosting (can buy in a can at most hardware stores) the inside the the clear tube for a good diffuser and lined leds on the bottom to create that "swirl" effect. I could provide you with a schematic and programming code for a small stamp chip that would create the effect. One other thing: strip it down to the gun chassis and make a 2 part mold of fiberglass.
Wow! A lot of work went into making this gun from the Cinema 4D model to actually putting everything together and building it. Props to you Banks.....get it?....Props! Lol. Just kidding. Well done!
About the opening in the barrel, would it be possible to make that function as a battery compartment to power some sort of light display on this? If so, how much more work do you think it would require?
It would be awesome to put a 1watt green laser diode (Possibly 2w for a wider laser) but the wiring would be tough due to the reloading process... And do those sounds actually come from the gun or were they edited in?
I do alot of wood work, but this is absoutly amazing. My only suggestion was to make the ammo canasters bigger. if you notice in nazi zombies. only one is loaded into the barell at a time. other than that. fantastic job dude!
The crazy thing about this video is that it's 8 years later, and now 3D printers are commercially available, so anybody could easily make this
It's insane how much can change in 8 years
I got it from an art's and craft store called,"FloraDec".
How can I get in contact w the guy who made it?
Hi. I printed the red "+" on a clear sheet and glued it on the gold ring.
best one ive seen on youtube
HE WILL NEVER SELL IT! GET IT THROUGH YOUR HEADS!
Who’s in 2020 watching this for childhood memories
Yes, I used a magnet. You could also try using a clip of some sort, but I would recommend a magnet. Also, to support the weight of the front, the magnet needs to be strong, or else it will keep hanging down.
Yes, you can see more if you watch the "Nazi Zombies" video breakdown.
THERE... right here... this is it... here it is...
GREAT JOB!
😃
I used a small metal cup which I believe was used for mixing drinks. I then sanded it down to make it the right size.
I LOVE YOUR VIDEOS!!!!
That's actually a small light that I put in there.
Get ready for a surprise
the ray gun it is perfect
The monkey bomb, along with the ray gun, was made with a lot of help from others. I'm thinking about maybe doing a quick video on it.
I put 2 small blue LED lights in it.
Awesome
Just gotta love your time travel guide, Banks! (?)
can you make One and i buy this?
amazing
THE BEST RAY GUN ON RUclips!!!
Can someone tell me where I can buy something like this
Can you tell me where did you make I want one
Dude it would be epic if they sold these In stores!! But man you are a beast and so is the guy that made the majority of it! Great job!
thats really creative dude :D
dude your videos are amazing! and your music work is outstanding keep up the videos and keep me postrd:)
Amazing job!
Cinema 4D.
You really should! That would be awesome for the rest of us!
"Tranzit" Kickstarter page is now live! Link in description.
@redeyejedicrew what was the 3D software you used?
thanks man!!! you just earned a subrscriber :)
Hello Friend.where I can buy ?Please answer me as it is to give my best friend
I approve
that is the coolest ray gun you
ever created
How much ??
You'd be surprised at how much access people have to those kinds of equipment, like highschool kids can work on one after school in tech ed shops or at my college there is a workshop with any professional equipment you can think of, so it would be very nice if there was a tutorial, asking nicely from one prop artist to another
AWESOME!!!!!!!!
can you show how to make it slow so i can see how to make it to
HE WILL NEVER GIVE IT AWAY!!!!!! NO MATTER HOW MANY TIMES YOU SAY PLEAAAAASE, OR OR WHINE ABOUT LIFE
Beautyful Ray gun !!!
Thank you very much :)
The create a resin composite of the two halfs and bore out the "center" as much as you need to insert and small piece of plexiglass. Grab yourself a transparency sheet and print out the meter display. Mount some white leds behind it from the (hopefully fabricated in the handle) battery power source and your're good to go.
Best ray gun maker
dude you made it BEAST
Mynameisbanks I thought it was MynameisAWESOME
You could have used rare earth magnets (cheap online) that are small and circular and create a better hold. Also, I might advise frosting (can buy in a can at most hardware stores) the inside the the clear tube for a good diffuser and lined leds on the bottom to create that "swirl" effect. I could provide you with a schematic and programming code for a small stamp chip that would create the effect. One other thing: strip it down to the gun chassis and make a 2 part mold of fiberglass.
where do i find voldemort?
Can you sell me one? I live in Mexico
Wow! A lot of work went into making this gun from the Cinema 4D model to actually putting everything together and building it. Props to you Banks.....get it?....Props! Lol. Just kidding.
Well done!
Ou should of made it like a paint ball gun or something it would be really realistic and cool
can you make one that I can buy
THIS IS AWESOME SAUCE I SWEAR TO GOD I WILL MAKE THIS
Damn really dope
thats freaking awsome :D
Very good Project !!
Very cool! Looks like you had some good help, too.
ALL HAIL TO BANKS!!!
I am making one with my dad and i think its going to look like the same :)
please give me the raygun 😕
1 word AWSOME
Awesome ray gun
good luck making a thunder gun I think you'd be better off using a 3d model for that either way nicely done
Is there a link for the stickers? Especially the batteries. Thanks, that'd be helpful.
What's the application that let's you build the model
Banks yo can you put the cinema 4d raygun on your site for download it would be helpful since im making one thx keep up the great work!
How much!!!$$$
Does anyone know where I can buy a ray gun of this great quality? Please tell me, and if it's good I'll pay a lot for it.
Chase Allen You cant i have looked for it to but i will make one instead
Check this guy called Delta Props on Facebook, he makes excellent models
This is too late but there is 3D printed ones on eBay
I wan two raigum
Please make more of these AND SELL THEM!!!!!!!
Could you sell me one pls?
That is awesome!
holy crap wood making (carpenter) my minor in crafts.... if only there was an "as good as this" paper model that would be impresive and awesome! :D
About the opening in the barrel, would it be possible to make that function as a battery compartment to power some sort of light display on this? If so, how much more work do you think it would require?
Hello I would like to buy what you made, you have a dedicated website for this?
1 criticism, I think the ammo is a little big, because in the game the hole is slightly bigger then the cold energy cell
It would be awesome to put a 1watt green laser diode (Possibly 2w for a wider laser) but the wiring would be tough due to the reloading process... And do those sounds actually come from the gun or were they edited in?
this guy is f***ing awsome !!!!!!!!!!!
this is so cool
fantastic!!!!!!!
I do alot of wood work, but this is absoutly amazing. My only suggestion was to make the ammo canasters bigger. if you notice in nazi zombies. only one is loaded into the barell at a time. other than that. fantastic job dude!
banks. How did u make the cone thing tha' attatched to the transparent bit??
hey bro can you build one for me :)
im like this one :D
Awsome man
when I was watching this. The video had 115 dislikes •_•
Hey you use mac :D
If it shot it would be so cool
mynameisbanks you should really sell these at your store
sick man
man, i wanna buy it!!!1
is that cinema 4d r11 ? i have r13 so can a help with any work
Can you make one for me
Please!
lmao
What did you use for the front of the gun the cone shaped part
hey i was thinking i can make my ray gun gold!
Where and what do you get for the supplies to make the ray gun?
wwwwoooooowwwwww fabulous raygun men¡¡
I now really want to try and make that now.