you can still add parameters to the drone in the advanced tab including faster acceleration. The tilt can be adjusted so when using full throttle to gain altitude due to advanced tilt you you can gain more forward momentum
The hack for the Mavic 3 works differently from the way that hacks for other, earlier drones worked. It's wonky, probably because DJI changed things to make it much harder to install the certificates as drone-hacks used to do. With the Mavic 3, it instead updates the firmware to create a custom flight controller. You still get warnings about altitude zones and no fly zones. You'll get a popup that says that the drone will automatically descend in x seconds, for an altitude zone, or will automatically land in x seconds for a no fly zone.. The warning will say that you will not be able to increase altitude, but will only be able to move horizontally to avoid obstacles. Drone-hacks says that there is nothing they can do about these warnings, but that you can safely ignore them. What actually happens is that when the countdown ends, the custom flight controller will automatically reset the countdown to the original number of seconds, and then keep resetting the countdown over and over. It's a little scary the first few times you encounter this situation, but once you see that the drone is never forced to descend or land, you get more confident in the hack. So basically, with the Mavic 3 hack, they don't actually remove the height and NFZ restrictions. Instead, they disable the ability for the system to do anything about it when you go beyond the restrictions.
Hacked my Mavic Mini today and it worked on the second attempt. Haven't tried the NFZ yet but the altitude limit has been removed. Only good thing about hanging onto this drone for the past 4 years.
No, I had checked probably about 9 months ago or so and the recommended firmware was version 5 and I had the latest version 6 which had not been hacked. And as you know one cannot downgrade anymore. Now version 6 has been hacked. Went up a little over 4200 feet before the low battery made me do a forced landing.
I bought a second hand DJI drone Mavic 2 zoom as i am new to drones and I want to practice first and get familiar with it. I would like this hack thing but i have some questions. 1. is the website for the hacks a DJI website or a third-party ? 2. after i pay the $40 will that be only for my specific drone, how about if i upgrade in future to a different DJI can i use the same serial number in my new dji? 3. if something happened to my drone and I take it for repair will the store accept to fix it since it is jailbreaked after that hack thing ? Thank you very much for the video and the detailed explanation
So I can't give you legal advice or anything of that nature. 1) The website isn't DJI and is, from what I understand, based in Slovakia, which is far from China, despite what the US government tells us. 2) It's going to be only for the drone you bought it for, and it will be tied to your email, so you won't be able to transfer the hack to someone else if you sell it. 3) I doubt DJI will even give you any warranty on an old model drone like that, but I could be wrong. However, I'm 100% certain any shop that fixes drones will fix it. Also, you can remove the hack from the drone's software.
@@CrabbyOldLady I'm currently using it, let's you said that it works and that's it, at least now I don't have to make fake permits of my local airport and send them to dji, the las time dji got me and they didn't want to accept the permits I send anymore, so yeah. Now I can work with my drone no questions ask.
Hi there! I hope you don’t mind me asking, but I noticed there’s currently no hack available for the Mavic 3 Pro. I was wondering if you have any information about sending in permits to DJI for permission to fly. If possible, could you share a template for the permit? I really appreciate your help, and thanks for checking out my video! Cheers!
@galinschi_studio i home made permits for a couple of years but was till recently when they decide they are not valid, it's simply just use the logo of your local airport , I'm a lawyer so it's kinda easy for me.
Hello friend! I have the problem with my DJI Air 2s drone. the drone is blocked. I contacted dji support. he told me that drone is blocked. how do i unlock drone. I was told that they have a program that formats all the drone systems, and then install all the programs that come from the factory. can you help me in this situation friend! I will thank you very much🙏
Hey! So did the dji give a reasoning for blocking the drone? I am not 100% sure how this works but I'm sure it's something similar to how IPhone works and I'm sure they blacklist your serial number so anytime you connect to the fly app it won't grant you the access. I believe there is a paid fly app version of lychee it's a 3rd party fly app and u can see if they support the Air2s. Other then that it might have to be a professional that can take ur drone apart and replace the piece that communicates with the app and showing the serial number. I hope that helps and definetly try to access your drone with 3rd party app like lychee. Cheers!
@@galinschi_studio I contacted DJI support. I sent serial number, they checked that drone is blocked. because the dji store was stolen, then I block the drone. There was a colleague of mine who bought the drone with the same problem. He bought it from the Aliexpress store, he got in touch with the seller. the seller and made a video call through the computer, put a USB cable to pair with the drone and the computer, and managed to unlock the drone by updating the firmware downgrade.
Good day, I just got a mini 2 and would like to remove altitude limits. So this jack costs money? And if the firmware ever updated over the hacks, does that mean you have to pay again and reapply? Or once you download you can reapply as much as you need to the same drone?
1) Yes I payed twice for my air2s and mini 2 2) I believe your license gets locked in the system so you can reapply the hack as many times as you need to as long as its same serial number. 3) As far as what firmware is supported and is compatible with the "hack" software you would have to check with the website I am not sponsored by drone hacks or anything like that just made this video since i didnt see much info on this when i was doing it. Please support by hitting a like and subscribe :)
@@calambria100 is that mean the drone hack website is DJI legit not someone who's jailbreaking drones for money ? 2: when you say the DJI care will replace the drone, do you refer if the drone in the 1 year guarantee right?
@@wadyeggas i got in contact with the company of hack and they really helped me out and gave me a free pass connected to my email so i could switch it to my other drone
I recently got the DH Professional for my Inspire 2. As soon as I clicked hack, it give me an error message “License is not valid for this feature “ any help?
@@galinschi_studio For my intended purpose my mini2 does everything I want it to. If I was to perform this hack and leave the drone on a dedicated device that has no internet I shouldn’t receive any firmware update requests and any forced updates right? Nor would DJI be able to put geo zones back on it and expand them correct since nothing is hooked to the internet?
That's a great video thanks for sharing, I would like to ask why we installed the Mavic 2 customer support since we didn't use it and the second question is I didn't find the metric equaliser that you showed in the process, other than that the heck was installed successfully.
@@galinschi_studio Hey man, i'm new to this but this looks cool, so when I get the drone how do I change what version it is on, i still havent got the drone yet but i'm planning on getting it and I just wanna make sure I don't mess anything up when installing this
@_Kommissar_ what type of a drone are you getting? If it's new or even used make sure u don't update the firmware. Check the dronehacks website to see if that drone will be compatible. I don't work for the company just posted my personal experience since there wasn't much out there. #drone #dronehacks #drones
Log in to your account and remove the drone you no longer have access to. If you found a drone, unfortunately, you cannot unlink it from the original account.
Приветствую друг, помоги пожалуйста, я хочу запустить программу но, она не находит или не видит девайс/пульт, я подключаю к кабелю сам пульт а не Дрон, на другом ноуте все работает , именно на моем не видит, что подскажешь?
I just hacked my fpv drone because I really would like to fly at least a couple of km's without being affraid. But this morning I flow it and under a 1 km both my rc signal and the video signal were just so low I was affraid to fly longer and I still get the " Becareful when flying because you are ina plane. Any idea's please in what to do ...:(
That might be due to signal traffic maybe too much radio frequencies in that area, tall buildings, etc. If I fly around buildings I make sure that if I loose signal I set my return home hight higher then buildings around and make it go back towards the take off location. Usually you will get the signal back once the drone passes those obstacles. Hope this helps and I understand your issue I faced it many times because of tall buildings
@@bigbag6499 I hacked the mini 2 and air 2s of you have questions regarding another type of a drone check out information regarding specific drone to you on their website.
Hi. I'm looking to get an air2s. This only works with a very early firmware version right? Do you know how to go back in firmware if I buy one that's already updated?
Bom dia. Preciso fazer no meu Air 2s. Porém dependo do drone pra trabalho. E gostaria de saber se e confiante. Esse desbloqueio. Lembrando que o meu está na versão. 0500.
@@galinschi_studio Sorry. Me. Good morning. I need to do it on my Air 2s. But I depend on the drone for work. And I would like to know how to be confident. This unlock.
@@Jnojuninhoshow I don't work for drone-hacks.com so you have to check with their website what sort of firmware you have and if it is eligible with their hack. I hope this helps
Does this work with brand X Chinese drones? I bought a used drone from a friend(I avoid buying from China directly due to human rights abuses) and was wondering what I could do to get this working.
@@galinschi_studio Thanks. Does I plan on borrowing a DJI drone on behalf of a friend who wants me to introduce him to DJI hacking. Not sure what model he has. Does DJI hacking work on all DJI drones?
Is it possible to just not update the firmware on the DJI drone and still use it? I am looking to buy one and also buy the hack. So just purchase the Hack and never update it.
I was wondering if they were legit... this looks a lot easier than having to repeatedly get an FAA authorization to fly INSIDE my own damn house or in my backyard. (I also live near an airport.)
Something should be available later this year. DJI just released the SDK for it a few days ago. Check the Drone Hacks over the next few months to see when it will be available.
If you follow the video your reversing the firmware...so you wont be updating. With the new drones out we arent going to be getting anymore updates most likley . The firmware supports the use of the RC remote btw
@@galinschi_studio Hi, I just checked DH site. For avata it only show the DH android app. Does that android app wil work to have longer range for my avata?
@user-ot9nv8uh2w Removing* restrictions. I'm not affiliated with dronehacks.com, so I would suggest emailing them directly with any questions regarding that. They do have a checklist, and I'm not sure if the Air 3 is supported yet.
Hi can I contact u please because i have dji air2s and i am and it’s saying DOWNGRADE NOT POSSIBLE NFZ AND ALTITUDE NOT POSSIBLE to thi femoare please help me solve this issue and i am ready to geve some cash please 🥰
you can still add parameters to the drone in the advanced tab including faster acceleration. The tilt can be adjusted so when using full throttle to gain altitude due to advanced tilt you you can gain more forward momentum
That's good to know!
The hack for the Mavic 3 works differently from the way that hacks for other, earlier drones worked. It's wonky, probably because DJI changed things to make it much harder to install the certificates as drone-hacks used to do. With the Mavic 3, it instead updates the firmware to create a custom flight controller. You still get warnings about altitude zones and no fly zones. You'll get a popup that says that the drone will automatically descend in x seconds, for an altitude zone, or will automatically land in x seconds for a no fly zone.. The warning will say that you will not be able to increase altitude, but will only be able to move horizontally to avoid obstacles. Drone-hacks says that there is nothing they can do about these warnings, but that you can safely ignore them. What actually happens is that when the countdown ends, the custom flight controller will automatically reset the countdown to the original number of seconds, and then keep resetting the countdown over and over. It's a little scary the first few times you encounter this situation, but once you see that the drone is never forced to descend or land, you get more confident in the hack. So basically, with the Mavic 3 hack, they don't actually remove the height and NFZ restrictions. Instead, they disable the ability for the system to do anything about it when you go beyond the restrictions.
Hacked my Mavic Mini today and it worked on the second attempt. Haven't tried the NFZ yet but the altitude limit has been removed. Only good thing about hanging onto this drone for the past 4 years.
Mini 1 or 2?
Mini 1
@craigwflys oh nice! I think the hack for 1 has been around for many years 😊
No, I had checked probably about 9 months ago or so and the recommended firmware was version 5 and I had the latest version 6 which had not been hacked. And as you know one cannot downgrade anymore. Now version 6 has been hacked. Went up a little over 4200 feet before the low battery made me do a forced landing.
@craigwflys oh wow, I swear I read somewhere that all the firmware versions for older drones were "downgradable"
Cheers. Dude this helped so much!
Glad it helped!
I bought a second hand DJI drone Mavic 2 zoom as i am new to drones and I want to practice first and get familiar with it. I would like this hack thing but i have some questions.
1. is the website for the hacks a DJI website or a third-party ?
2. after i pay the $40 will that be only for my specific drone, how about if i upgrade in future to a different DJI can i use the same serial number in my new dji?
3. if something happened to my drone and I take it for repair will the store accept to fix it since it is jailbreaked after that hack thing ?
Thank you very much for the video and the detailed explanation
So I can't give you legal advice or anything of that nature. 1) The website isn't DJI and is, from what I understand, based in Slovakia, which is far from China, despite what the US government tells us. 2) It's going to be only for the drone you bought it for, and it will be tied to your email, so you won't be able to transfer the hack to someone else if you sell it. 3) I doubt DJI will even give you any warranty on an old model drone like that, but I could be wrong. However, I'm 100% certain any shop that fixes drones will fix it. Also, you can remove the hack from the drone's software.
@@galinschi_studio Thank you very much for your help, I am gonna give it a try and hack it, I wish the price was a bit less, it is around $40
@user-xf9dl7jj8q I'm sure if it doesn't work for some reason, you can request a refund or something.
So I have a Mavic 3, an I have a Mavic 3 Cine aswell, what are the cons with this procedure? It would work for ever?
Just don't update the firmware and you'll be fine.
@@CrabbyOldLady I'm currently using it, let's you said that it works and that's it, at least now I don't have to make fake permits of my local airport and send them to dji, the las time dji got me and they didn't want to accept the permits I send anymore, so yeah. Now I can work with my drone no questions ask.
Hi there! I hope you don’t mind me asking, but I noticed there’s currently no hack available for the Mavic 3 Pro. I was wondering if you have any information about sending in permits to DJI for permission to fly. If possible, could you share a template for the permit? I really appreciate your help, and thanks for checking out my video! Cheers!
@galinschi_studio i home made permits for a couple of years but was till recently when they decide they are not valid, it's simply just use the logo of your local airport , I'm a lawyer so it's kinda easy for me.
@@carimpest Got it. Thanks for the insights.
Hello friend! I have the problem with my DJI Air 2s drone. the drone is blocked. I contacted dji support. he told me that drone is blocked. how do i unlock drone. I was told that they have a program that formats all the drone systems, and then install all the programs that come from the factory. can you help me in this situation friend! I will thank you very much🙏
Hey! So did the dji give a reasoning for blocking the drone? I am not 100% sure how this works but I'm sure it's something similar to how IPhone works and I'm sure they blacklist your serial number so anytime you connect to the fly app it won't grant you the access. I believe there is a paid fly app version of lychee it's a 3rd party fly app and u can see if they support the Air2s. Other then that it might have to be a professional that can take ur drone apart and replace the piece that communicates with the app and showing the serial number. I hope that helps and definetly try to access your drone with 3rd party app like lychee.
Cheers!
@@galinschi_studio I contacted DJI support. I sent serial number, they checked that drone is blocked. because the dji store was stolen, then I block the drone. There was a colleague of mine who bought the drone with the same problem. He bought it from the Aliexpress store, he got in touch with the seller. the seller and made a video call through the computer, put a USB cable to pair with the drone and the computer, and managed to unlock the drone by updating the firmware downgrade.
@@Sandrone.filmagem if that is something that works then I would try to contact that seller and maybe offering to pay for those services
Quick question do you activate on dji website before the hack or just the once after the hack is installed? Thanks
You can activate whenever just as long as you don't update the firmware
Does anyone have this pop up on the screen after hacking the NFZ : "no manual mode UAVtoo high or far" i got this on my DJi fpv racer.
No, it might be an exclusive feature for FPVs. I recommend contacting the drone hacks team directly for more information.
Good day, I just got a mini 2 and would like to remove altitude limits. So this jack costs money? And if the firmware ever updated over the hacks, does that mean you have to pay again and reapply? Or once you download you can reapply as much as you need to the same drone?
And because this thing has the most updated firmware, does that mean it may not be compatible with the hacks?
1) Yes I payed twice for my air2s and mini 2
2) I believe your license gets locked in the system so you can reapply the hack as many times as you need to as long as its same serial number.
3) As far as what firmware is supported and is compatible with the "hack" software you would have to check with the website
I am not sponsored by drone hacks or anything like that just made this video since i didnt see much info on this when i was doing it.
Please support by hitting a like and subscribe :)
Unless you have lost your drone and got a replacement drone from dji care. They will switch your pass for free to your replacent drone. Just ones.
@@calambria100 is that mean the drone hack website is DJI legit not someone who's jailbreaking drones for money ?
2: when you say the DJI care will replace the drone, do you refer if the drone in the 1 year guarantee right?
@@wadyeggas i got in contact with the company of hack and they really helped me out and gave me a free pass connected to my email so i could switch it to my other drone
I recently got the DH Professional for my Inspire 2. As soon as I clicked hack, it give me an error message “License is not valid for this feature “ any help?
Possibly, contact the drone hacks for help. They are quite quick in responding via email.
Would this work with the dji inspire2? Trying to remove nfz need some help
I would check their website as I don't work for the company. 🌐💼
any idea if this is nfz and height unlocked for FREE (like the mavic pro)? thanks
Not that I'm aware of.
Does anyone know how or if this works on a dji inspire 2 ?
I would email the drone hacks customer service.
Also what happens if you keep denying the firmwear for years, will it just eventually stop working?
I doubt it but the speed that technology is moving I would say that in a few years we will all upgrade our drones.
@@galinschi_studio For my intended purpose my mini2 does everything I want it to. If I was to perform this hack and leave the drone on a dedicated device that has no internet I shouldn’t receive any firmware update requests and any forced updates right? Nor would DJI be able to put geo zones back on it and expand them correct since nothing is hooked to the internet?
@lanejohnson7656 So Dji will be asking you to click download/install update, and you will be ignoring it.
That's a great video thanks for sharing, I would like to ask why we installed the Mavic 2 customer support since we didn't use it and the second question is I didn't find the metric equaliser that you showed in the process, other than that the heck was installed successfully.
I'm glad it worked out for u, and I didn't mess with the metrics of the drone. I was mainly looking to remove the nfz
@@galinschi_studio Hey man, i'm new to this but this looks cool, so when I get the drone how do I change what version it is on, i still havent got the drone yet but i'm planning on getting it and I just wanna make sure I don't mess anything up when installing this
@_Kommissar_ what type of a drone are you getting? If it's new or even used make sure u don't update the firmware. Check the dronehacks website to see if that drone will be compatible. I don't work for the company just posted my personal experience since there wasn't much out there. #drone #dronehacks #drones
@@galinschi_studio Mavic 3
@@_Kommissar_ used?
Is the Inspire 1 compatible?
check with the website
Hey man how do I find out my firmware for my drone?
Connect ur drone to the app, go into settings and it tells u firmware for ur controller, app, and drone
Just ordered a mini 2. Do I update the firmware in the dji app before using this software or do I replace the firmware using this software? Thanks
So I believe they can now support a large amount of firmware on the Mini 2. But check the website.
how to remove bound account from lost drone on dji mini 2
Log in to your account and remove the drone you no longer have access to. If you found a drone, unfortunately, you cannot unlink it from the original account.
Приветствую друг, помоги пожалуйста, я хочу запустить программу но, она не находит или не видит девайс/пульт, я подключаю к кабелю сам пульт а не Дрон, на другом ноуте все работает , именно на моем не видит, что подскажешь?
Na skolko ya znaiu sam dron nujno podkluchati. Ya lichno pult ne podkluchal.
I just hacked my fpv drone because I really would like to fly at least a couple of km's without being affraid. But this morning I flow it and under a 1 km both my rc signal and the video signal were just so low I was affraid to fly longer and I still get the " Becareful when flying because you are ina plane. Any idea's please in what to do ...:(
That might be due to signal traffic maybe too much radio frequencies in that area, tall buildings, etc. If I fly around buildings I make sure that if I loose signal I set my return home hight higher then buildings around and make it go back towards the take off location. Usually you will get the signal back once the drone passes those obstacles. Hope this helps and I understand your issue I faced it many times because of tall buildings
Hello I’m trying to hack my fpv how did you do it?
@@bigbag6499 I hacked the mini 2 and air 2s of you have questions regarding another type of a drone check out information regarding specific drone to you on their website.
@mamoshimiloni9559
Hi. I'm looking to get an air2s. This only works with a very early firmware version right? Do you know how to go back in firmware if I buy one that's already updated?
Bom dia. Preciso fazer no meu Air 2s. Porém dependo do drone pra trabalho. E gostaria de saber se e confiante. Esse desbloqueio. Lembrando que o meu está na versão. 0500.
Please use Google translate I cannot copy and paste comments 🙏🏼cheers
@@galinschi_studio Sorry. Me. Good morning. I need to do it on my Air 2s. But I depend on the drone for work. And I would like to know how to be confident. This unlock.
@@Jnojuninhoshow I don't work for drone-hacks.com so you have to check with their website what sort of firmware you have and if it is eligible with their hack. I hope this helps
Ola eu fiz debloqueio do meu air 2s fico perfeito
@@droneskyline mais a versão que estava teu drone qual era?
Does this work for swellpro drones as well
Idk what that is sorry
Should I be cautious about my mini 2 attempting to update by itself? Or will it not update unless I approve it?
It will suggest u update just hit cancel or ignore it
Make sure you turn off automatic checking for updates
Does this work with brand X Chinese drones? I bought a used drone from a friend(I avoid buying from China directly due to human rights abuses) and was wondering what I could do to get this working.
I have no clue
@@galinschi_studio Thanks. Know anyone who might know? I can ask them.
@@indigodawn3174 I've never heard of x drones here we have two drones dominating the market autel and dji
@@galinschi_studio Thanks. Does I plan on borrowing a DJI drone on behalf of a friend who wants me to introduce him to DJI hacking. Not sure what model he has. Does DJI hacking work on all DJI drones?
@@indigodawn3174 you would have to check model and what software is compatible with the drone hacks. Com
No license for regular mini 3?
You don’t need to register under Part 107 unless you plan to sell your footage or use it for commercial purposes.
Is it possible to just not update the firmware on the DJI drone and still use it? I am looking to buy one and also buy the hack. So just purchase the Hack and never update it.
Yes basically ur not updating the drone and using it on the original firmware
Is there any news for air3?
I'm not sure. I would check and email the company/website directly.
Check with the website.
i wished they finally unlocked the mini 4 pro, but I wished we didnt have to do this unlocking crap to begin with!
same waiting on the mavic 3 pro
Anything available for mini 3 pro?
I believe there is something for mini 3 as u can check their website
Hi, how unbind account from mavic 3?
From personal experience when u connect the remote and turn on the drone I went into about or account and unbound or add new account
is the fcc permanent as soon as i powere my mini 2 on and off ?
It's not the fcc it's the dji following the local laws and locking the map
I was wondering if they were legit... this looks a lot easier than having to repeatedly get an FAA authorization to fly INSIDE my own damn house or in my backyard. (I also live near an airport.)
Yes, and I doubt you will be approved as they make no exceptions for the airport's. (Same situation, btw lol)
It doesn’t work with macOS?
Not sure as I'm a pc user
any news on mini 3 pro hack,
Something should be available later this year. DJI just released the SDK for it a few days ago. Check the Drone Hacks over the next few months to see when it will be available.
I just kept checking the dronehacks website and making sure that i didnt update the drone.
@@galinschi_studio update?
@@fonsos13 update? Js got one and cant fly in my area
@@twavs9207 a drone update from dji?
It will work on Mavic 3 pro?
Check the drone hacks website for the latest news.
So every time you do a firmware update, you have to do the same procedure
If you follow the video your reversing the firmware...so you wont be updating. With the new drones out we arent going to be getting anymore updates most likley . The firmware supports the use of the RC remote btw
How about you don’t update the firmware, earth shattering revelation.
What happens if you don’t have a computer
I think there is an android app but I haven't tried it personally
Might be the only option.
No unlocking certificate?
What do you mean?
what'up.splendd editing,goodbye!,
Im sorry not sure what you mean....
@@galinschi_studio drunk typing, maybe?
@@New_York_Sights lol
Help me mavic air 2s
Like what?
Hey do you do other people drones
@shortdogg6346 What type of drone do you have? And what firmware?
We need DJI Air 3
I would if someone would provide me with one lol
What do you mean?
Thanks really helpful and you didn’t shout 😊 unusual for that part of the world
haha no problem!
You talking about Americans? Lol
@@Somanybeats how did you guess
Can someone please send me your info so I can Jail break a drone
What do you mean?
does this work with Mac devices?
Check with the website
i want no to pay!!!!!
If you find a way please share lol
No Mavic 3 Pro. Useless!
OK lol
@@galinschi_studio Hi, I just checked DH site. For avata it only show the DH android app. Does that android app wil work to have longer range for my avata?
not mavic 3
My understanding they do have something up for Mavic 3 and mini 3 pro
Change the title!!! No Mavic 3 NFZ hack!!!
Someone is salty, lmao
There is one now, but only for the original Mavic 3. Not for the Cine, the Pro, or the Classic.
Any way i can enail or message you directly?
I won't be able to help you as I don't work for the company with drone hacks. I just shared my experience following the instructions.
How can we contact you?
In regard?
@@galinschi_studio Breaking the restrictions of the air 3 drone
@user-ot9nv8uh2w Removing* restrictions. I'm not affiliated with dronehacks.com, so I would suggest emailing them directly with any questions regarding that. They do have a checklist, and I'm not sure if the Air 3 is supported yet.
Drone-hacks.com
@@galinschi_studioOkay, friend
But I sent but he didn't answer
Can you help me with this?
Hi can I contact u please because i have dji air2s and i am and it’s saying DOWNGRADE NOT POSSIBLE
NFZ AND ALTITUDE NOT POSSIBLE to thi femoare please help me solve this issue and i am ready to geve some cash please 🥰
If can kindly tell me what firmware is your air 2s I can maybe possibly assist you
@@galinschi_studio hi it is posibile to donwdrade my air 2s ?the firmwere now is 02.04.2190 . tx