Thanks Matt for taking the trouble to show us how to access the bulbs. To be honest the first 30 secs of your video was my missing clue. It is simple when you know how, removing that black plastic trim. I thought I would have to remove the boot inner lining.
Looking at your video further, I can see removing the rear lights gives access to rear bumper fixings. I am soon to fit a Towbar, so this info is helpful. Thanks
When I took the tailgate clusters off to swap the reversing bulbss, I didn't take the side covers off, just gave the clusters a bit of a wiggle as I was taking them out. Less clips to damage that way... And on the subject of clips, the wiring on those clusters was a bit tight, and the wires are held down by a really thin, but surprisingly flexible little plastic bar. I managed to not break it, for a change 🤣
Thanks. This video helps me a lot in replacing my reversing light. BUT I accidentally dropped my screw when uninstalling reversing light. Is there anyway I can take it off by taking off the plastic cover of my tailgate? I removed two screws but couldn't remove it.
Yes it all comes apart. I haven't done the MG but all cars are assembled the same. The trim will be held on with clips, so you need to get your fingers around the edge and pull.
Thanks for your video Matt. I need to replace one of the fog lights from the bumper, does anybody know what is needed to replace the lamp plastic enclosure?
The MG has long gone, but I'm sure they're like any other vehicle, the wiper arm just pushes off. They are stiff though. Once you have the new one, you'll see the way it mounts.
Plz pull out all the bulbs from their sockets so that we can see the base/roots of the bulbs so that we can make out what is their bulb type/size/model etc
Plz let me know the bulb type/size/model of reverse white bulb of MG ZS EV ? Is it T10 or T15 ? or is it BA1516 or is it BAU1516 ? What is the model ? Plz reply
Thanks Matt for taking the trouble to show us how to access the bulbs. To be honest the first 30 secs of your video was my missing clue. It is simple when you know how, removing that black plastic trim. I thought I would have to remove the boot inner lining.
Thanks. This is exactly what I am searching for.
Glad it helped.
Looking at your video further, I can see removing the rear lights gives access to rear bumper fixings.
I am soon to fit a Towbar, so this info is helpful. Thanks
I was aware that you could not tow with a EV
1:13
This video helped me save 80 dollars. Thanks
Glad it helped
Merci pour la vidéo qui m'a bien été utile....
Good practical video many thanks.
Thanks for this video. If you may make video on replacing the rear foglight bulb also
When I took the tailgate clusters off to swap the reversing bulbss, I didn't take the side covers off, just gave the clusters a bit of a wiggle as I was taking them out. Less clips to damage that way...
And on the subject of clips, the wiring on those clusters was a bit tight, and the wires are held down by a really thin, but surprisingly flexible little plastic bar. I managed to not break it, for a change 🤣
Plz let me know what is the model/size/type of Red Brake Light at the rear side of MGZS EV ? Is it T10 or T15 ?
Thanks. This video helps me a lot in replacing my reversing light. BUT I accidentally dropped my screw when uninstalling reversing light. Is there anyway I can take it off by taking off the plastic cover of my tailgate? I removed two screws but couldn't remove it.
Yes it all comes apart. I haven't done the MG but all cars are assembled the same. The trim will be held on with clips, so you need to get your fingers around the edge and pull.
Thanks for your video Matt. I need to replace one of the fog lights from the bumper, does anybody know what is needed to replace the lamp plastic enclosure?
Sorry, can't help as its a long time since I've had this car or worked on one.
Great video, one side of the number plate lights is gone and I need to replace it, how do I remove the cover?
I don't have one of these here now, so can't help or remember. But have a look in the user manual as changing bulbs is covered.
Hi there. Can you advise how to replace rear screen swiper arm on MGZS please?
The MG has long gone, but I'm sure they're like any other vehicle, the wiper arm just pushes off. They are stiff though. Once you have the new one, you'll see the way it mounts.
Plz pull out all the bulbs from their sockets so that we can see the base/roots of the bulbs so that we can make out what is their bulb type/size/model etc
Isnt the 10 mm lonely the one that lives in your pocket..? Or does he have neighbours, Coin etc etc
Plz let me know the bulb type/size/model of reverse white bulb of MG ZS EV ? Is it T10 or T15 ? or is it BA1516 or is it BAU1516 ? What is the model ? Plz reply
You'll have to look in your handbook, as I no longer have the car.
@@GoGreenAutos any way, how was that car mg zs ev ? Did you like it ?
@@bhagwansinghrana8224 Excellent EV. Really nice to drive. Amazing value. A far better car than most would imagine it would be.
Nice thanks
Tripod may help?
They say the tail light (brake+park) is an all LED unit. Are they misleading us?
Is that on the facelift petrol ZS?
Not LED on the ZS EV
GET A TRIPOD!
Great practical video... Thanks,
Plz let me know the model/size/type of amber turn indicator bulbs at the rear/back side of MGZS EV ? Is it T10, or T15 ? Plz reply