hello Mr. Dk Diy. I'm watching your videos here from Brazil, and I'm also subscribed to your channel. I am grateful for your willingness to share some of your knowledge, which is helping me with many ideas. Thanks.
Hi I'am ali khademan .I recently joined RUclips and I need your support. If you feel that my videos might help you with something, I'm very glad to Subscribe me even for a limited time. Thank you
Well done This reminds me my dad made similar press back in sixties.He was automotive engineer had his own garage so this was quite useful.Sadly he passed away in 1996.I must say he was genius in inventing new ideas.
Дело мастера боится. 😂 реально боится. Запрессовать подшипник не через оправку а через внутреннее кольцо, сломав сепаратор и согнув шары, и потом крутить на пальце, удивляясь, почему не крутится. 😂 я себе такой же пресс сделал из домкрата на три тонны. В общем при выпрессовке ступичного подшипника уголки усиленные вверенной в них трубой согнуло как масло. Сверху усилил тем же уголком домиком кинув с верхней точки биссектрису в место опоры домкрата, там выдержало. Так что одноразовая штука, так сайлентблоки прессовать. На десятитонных прессах опора детали из стали около сантиметра. На работе такой стоит)
Thank you for making this video which takes the mystery out of making your own hydraulic press. Now, I can go ahead and adapt it to suit my needs. I am planning on building a system which takes two jacks over an extended platform. The finished product would be motorised to really take advantage of the double jacks in the set-up. So, yes, thanks again for sharing your knowledge.
Well done. Brief additions as to size of material and length of cuts would be terrific. Looks like 1 1/2” angle iron and maybe 1 1/2” x 3 1/2” tubing? But what is the length of the vertical tubing and the length of the angle iron, etc? Thanks.
When looking for bottle jacks my sure you always pick a good brand like big red or noreco. I’ve only ever used those but I pick houses up with them so I figured they are pretty alright
Where's the parts list ? Telling what size steel you used would make this a super video. But it's still great. I was getting to buy one, now I'll try to make my own from the material I have laying around.
23:50 После такого подшиБник точно нужно будет выкидывать. Покраска отвратная, а так рабочая самоделка, только вот уголки нужно побольше. В общем проверка простая - нужно что-бы домкрат упёрся и развил максимальное усилие (до срабатывания перепускного клапана, если имеется) а конструкция осталась целой.
hi man, very good idea and I would like to make my own one but the problem is that it's taking measurements, or I could find them, no measurement I can't do much
дружище здорово ты всё делаешь и ровно и красиво .но вот непойму ход твоих мыслей зачем ты швеллер в основания загнал? для тяжести? или устойчивости?там где хватило бы 30 уголка ты мощный швеллер впорол а где будет всё ломатся и гнутся там дряхлый уголок? не просто интересно. я не придираюсь но где логика?
Hola genio eres extraordinario me gustan los invento tengo mi pequeño taller para cosas propia me gustó mucho la prenza d hecho yo compre una gata hidráulica para hacer una la pasión mía son las motos cuadrimotos carros d arrastre Chao genio bendiciones 👍💪😁
I am from Kashmir India .I could not find vedio like this anywhere on RUclips , thanks for this great job. Can you tell me all the measurements you have done , I mean size of pieces cut and distance between them. Once again thanks for the vedio you may not know how many people all around the world will make their living out of this vedio and start there business.
Hello Dajan, just wanted to ask if you know of any ferro (mild steel) suppliers, besides going to Technomat or Leroy Merlins, so i can buy ferro for other projects here in Vicenza italy. Any help is very greatful, Grazie
Well done but if you press your bearing in by pressing on the inner race like on the video you will simply kill the bearing !!! you MUST use an adapter to press on the OUTER race, this is basic engineering.
24:50 - видно, что пресс получился тупо одноразовым. нижние уголки уже погнулись. на поперечены следует как раз брать швеллер, а уголки поперек варить к ножкам внизу для устойчивости.
It should rest on a table, not on floor, because it is short. You should have made the main C-channel posts longer, like 5 feet, so you do not have to bend down looking at what you're pressing.
Good job,but it moves like pendulum if you will not stable it at the bottom .I think bottom side hight increase or and + type support for two legs makes it more stable.
Belo trabalho estou fazendo uma igual presiso para deichar o chifre do boi retinho depois de mole para cabo de faca .eu fazia o trabalho na morsa mais kebrou o eixo faz muita força
hello Mr. Dk Diy. I'm watching your videos here from Brazil, and I'm also subscribed to your channel. I am grateful for your willingness to share some of your knowledge, which is helping me with many ideas. Thanks.
I thanks for Nice comment
Necesito la medida de todos los cortes para ser la prensa
Por favor
Hi
I'am ali khademan .I recently joined RUclips and I need your support. If you feel that my videos might help you with something, I'm very glad to Subscribe me even for a limited time.
Thank you
@@MrDKDIY uu
Well done This reminds me my dad made similar press back in sixties.He was automotive engineer had his own garage so this was quite useful.Sadly he passed away in 1996.I must say he was genius in inventing new ideas.
Дело мастера боится. 😂 реально боится. Запрессовать подшипник не через оправку а через внутреннее кольцо, сломав сепаратор и согнув шары, и потом крутить на пальце, удивляясь, почему не крутится. 😂 я себе такой же пресс сделал из домкрата на три тонны. В общем при выпрессовке ступичного подшипника уголки усиленные вверенной в них трубой согнуло как масло. Сверху усилил тем же уголком домиком кинув с верхней точки биссектрису в место опоры домкрата, там выдержало. Так что одноразовая штука, так сайлентблоки прессовать. На десятитонных прессах опора детали из стали около сантиметра. На работе такой стоит)
tôi không phải thợ chuyên nghiệp . nhưng đả xem video của bạn . mình cũng đã tự tay làm 1 bộ với con đội 6 ton cũng quá ok luôn . cảm ơn bạn 👍👍👍
домкрат хватит и на 2-3 тонны, т.к. угольники больше не выдержут, а вот за отдельную подсказку опцию зубило - отдельное спасибо!
Nice one, I like this design because you don't turn the jack over. Thank you for sharing...from South AFRICA
Thank you for making this video which takes the mystery out of making your own hydraulic press.
Now, I can go ahead and adapt it to suit my needs.
I am planning on building a system which takes two jacks over an extended platform. The finished product would be motorised to really take advantage of the double jacks in the set-up.
So, yes, thanks again for sharing your knowledge.
Well done. Brief additions as to size of material and length of cuts would be terrific. Looks like 1 1/2” angle iron and maybe 1 1/2” x 3 1/2” tubing? But what is the length of the vertical tubing and the length of the angle iron, etc? Thanks.
Muy bien elaborada, pero no debes hacer presion al rodamiento por la parte interna porq se daña, pero esta muy bien hecha 🔥
Отличная работа. 👍
Spring kaha se mile ga
Excellent video, very well explained. I shared the measurements and thicknesses of the irons used. I send you greetings from Argentina
Awesome, thank you!
What material did u use can u give d size?
Thanks, congratulations!! Far from, Celaya, Guanajuato, México
Thanks for watching!
23:50 You just ruined that bearing. You need to press it in by the outer race if thats the surface making contact.
Nice job. Adding information on materials used and detailed measurements would be useful.
Did u know d material ang measurements?
The tolerances on those measurements don’t really warrant an itemized list. It’s really just up to who’s making it.
When looking for bottle jacks my sure you always pick a good brand like big red or noreco. I’ve only ever used those but I pick houses up with them so I figured they are pretty alright
Thank you for this, maybe add material measurements next time?
Where's the parts list ? Telling what size steel you used would make this a super video. But it's still great. I was getting to buy one, now I'll try to make my own from the material I have laying around.
23:50 После такого подшиБник точно нужно будет выкидывать.
Покраска отвратная, а так рабочая самоделка, только вот уголки нужно побольше.
В общем проверка простая - нужно что-бы домкрат упёрся и развил максимальное усилие (до срабатывания перепускного клапана, если имеется) а конструкция осталась целой.
Felicitări pentru proiect!!👍...Romania..
Grazie.
Că si model este foarte buna. Ca materiale sunt foarte firave! Nu știu dacă o să reziste la forța!
Make some more of this amazing tools that I am interested of making
Que electrodo utilizas, estaré atento a tu respuesta. Genial, muchas gracias.
Конструкция интересная, но домкрат лучше установить снизу, что бы рабочее пространство было перед глазами.
Smart AF! Just Brilliant!
👍👍😉
10 ton !!?
hi man, very good idea and I would like to make my own one but the problem is that it's taking measurements, or I could find them, no measurement I can't do much
👍😉😉👌✔
Sir aap ki video helpful he ek request he . measurements de te to bari acha hota
Great video. Why is it no one ever adds what material was used so we could see what the cost would have been?
Muy buen trabajo
дружище здорово ты всё делаешь и ровно и красиво .но вот непойму ход твоих мыслей зачем ты швеллер в основания загнал? для тяжести? или устойчивости?там где хватило бы 30 уголка ты мощный швеллер впорол а где будет всё ломатся и гнутся там дряхлый уголок? не просто интересно. я не придираюсь но где логика?
I wish i had all the equipment to make a hulydraulic press ,Mr DK if you are reading the comments please do reply
Pour presser des châtaignes cuites pour faire de la purées de confiture pourquoi pas? merci pour votre vidéo ça me donne des idées!
👍😉
Good engoh fore smal works. 😊
Buen curro, ha quedado genial.❤
Hi
I am having a query. Why springs are attached to it? What purpose it will server ?
Excelente trabalho parabéns amigo!!!
Very Good
Congratulations
Thank you John very good work very nice keep the boy
Thank yuo for makin this video excelent
👍😉
Thanks! Nice Idea for home workshop! +1 subscriber!
Thanks a lot
Hola genio eres extraordinario me gustan los invento tengo mi pequeño taller para cosas propia me gustó mucho la prenza d hecho yo compre una gata hidráulica para hacer una la pasión mía son las motos cuadrimotos carros d arrastre Chao genio bendiciones 👍💪😁
I am from Kashmir India .I could not find vedio like this anywhere on RUclips , thanks for this great job.
Can you tell me all the measurements you have done , I mean size of pieces cut and distance between them.
Once again thanks for the vedio you may not know how many people all around the world will make their living out of this vedio and start there business.
👍👍
Trés bonne idée merci je met ça en pratique tout de suite.
Good job use fully hydrilic
Press 👍👍👍❤❤❤
nice video... what is the size of angle bar and square tube?
Great video.
Congratulations 👏👏. Very god my friend. top of the galaxies. big hug to all of the channel😃👍👍👍
Amei a ferramenta.. Valeu 👍✌️🇧🇷
Hello Dajan, just wanted to ask if you know of any ferro (mild steel) suppliers, besides going to Technomat or Leroy Merlins, so i can buy ferro for other projects here in Vicenza italy. Any help is very greatful, Grazie
A great idea, necessity is the mother of invention
،thanks
👍👏
Kya price ka hai
3 to 5 ton max press, the material is to weak in s tructure for 10 ton, the eq angle will bend !
Well done but if you press your bearing in by pressing on the inner race like on the video you will simply kill the bearing !!! you MUST use an adapter to press on the OUTER race, this is basic engineering.
Belo trabalho !👍👍👍
24:50 - видно, что пресс получился тупо одноразовым. нижние уголки уже погнулись. на поперечены следует как раз брать швеллер, а уголки поперек варить к ножкам внизу для устойчивости.
Согласен! Все сделано, как то на скорую руку, не продуманно! Так, для какой то мелочевки!
comment peut-on afficher la pression obtenue ? merci
It should rest on a table, not on floor, because it is short. You should have made the main C-channel posts longer, like 5 feet, so you do not have to bend down looking at what you're pressing.
Super travail belle presse👍👍👍👏
Τέλεια η κατασκευή της πρεσσας .
😉👍 Thanks for Nice Commnet !
@@MrDKDIY οκ.
Parabens......
Muito bom!....
Fábio Pio. Brasil
Hidrilic jack kitne ka hai
Thanks for the knowledge
Super video 💖💕
Thanks 🤗
Thank you Becuase of you i tryed to make one by my self 💪and i did :)
Bravo bon courage
👍👍👌💡
Would this frame accommodate a 20 ton press or could it be beefed up enough to be used for a jewelry press?
Muito bom muito bem explicado 👏👏fou fazer o meu ☺☺
Thanks
Tq for technical value.
Disculpame ¿porque no pusiste el plato con el pin por debajo mi vale??
👍👍👍👍👍👍👍👍👍🇫🇷Beau travail 👏👏👏👏👏
Excuse me why didn't put plate down side my friend
very very very excellent i like it
Thanks br thanks alot
Good job,but it moves like pendulum if you will not stable it at the bottom .I think bottom side hight increase or and + type support for two legs makes it more stable.
kitna ka hai mujhe lena hai
I would need a plan with measurements thanks
I'M Pretty new at this but is it possible to use 100-200 ton hydraulic if built with this setup. Thanks for the video!
Opel
ciao. perfavore mi dai le misure dei pezzi che hai tagliato. grazie. ciao
Muito bom, a melhor que vi, parabéns. Vou fazer uma,obrigado
Thanks, where are u from bro??
Brasil
Nice bravo Brasil 🇧🇷🇧🇷🇧🇷
Tks, very much friend
U welcome
Mujhe matana hai bhi 10 tan ka jack kaya aapke pass hai hai to prayj kitna lagega
Luar bisa
Sungguh simpel dan mudah
Gostei. Vou fazer a minha o macaco já. Tenho. Ok. Parabéns. Deus te abençoe
Impressive but if I'm pressed I'd have to say one well equipped garage (not a home). Well beyond my capabilities unfortunately.
Bravo pour ta super presse hydraulique 👍
👍
Nice DIY video
Thank you for comment
Very good. Thank you for your job
Pressing a bearing by the inner race ... not a good idea. But, good job on the build.
👍👍🔧
I like the vedio very nice where can i buy the springs because i am trying to buld one thank you
nice job, i totally agree with William Castleberry. thanks for the share .
Sir kitne me aata h
Спасибо автору познавательно.
Very good job
Thanks
good idea, I will subscribe to your channel!!!
Thanks bro 👍😉
Excelente parabéns muito criativo 👍
Thanks
Hi from Ukraine! I like the idea.
Thanks Ukraine 👍🇺🇦
Cost of the same?
Idear. Very good
Many many thanks
Belo trabalho estou fazendo uma igual presiso para deichar o chifre do boi retinho depois de mole para cabo de faca .eu fazia o trabalho na morsa mais kebrou o eixo faz muita força
🔧👌
Ótimo trabalho! Excelente idéia! 🇧🇷 Brasil
Great for crushing things,what else?
😁👍😉