I don't normally watch the ENTIRE video that people post of builds, but, this. Wow. Absolutely beautiful. I have no clue why there are ANY thumbs down. Bravo.
Duuuude, you doing that reminds me of my high school days! Boys trying to out do one another and who had the baddest mini-trucks from '87 to '90 that had the better looks and sound. All came to nothing, wasted money. But you did it better than anyone else did! Yah sometimes we can be amazed what kids behind us can do. Great job kid!🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Late 70's, early 80's we just used House stereo speakers in the trunk to get the "desired effect". Yep, I'm Old! Small idea to get someone to turn their music down, play Bagpipes through the stereo at max volume. They usually get the hint that you don't want to listen to what they are listening to.
Мало того, синтепон попадет внутрь динамиклв, нужно было динамики защитить хотя бы марлей. Да и жля хорошего звука нужно дополнять компонентами - СЧ и ВЧ. А от мидбассов звук как из ведра
меня больше смущает очень небольшое расстояние от обратной стороны динамиков до выходов портов фазоинверторов.. Сильно сомневаюсь, что тут хоть что-то просчитывали, похоже, что просто для ролика сваял, не более того.
my friend who has a woodworking shop and makes furniture for a living uses a slightly moist sponge to clean the excess glue before it dries and he has a perfect finish all the time.maybe you should try it!!!!!!!!!
Could you please reference the hyperlinks to the speakers and circuit board that you use in your speaker systems? The front face is beautiful; was it carved with your CNC system? Thanks for sharing this insightful video. Wishing you a great week. Cheers
Yeah this appears to be based on a D&B Audiotechnik design for a dual 18” subwoofer. The b2 and b22 subwoofers, depending on when they were made, are one of the leading subwoofers in use at arena and stadium concerts. (Slight changes were made between the two models.) I doubt it works very well when downsized like this, probably tuned really high. I have always wanted to experiment with downscaling one of these pro designs anyway and seeing what happens. Also, the middle part where the drivers go is slightly different on the original D&B b2 and b22 subs, with the drivers facing slightly away from the front.
Fabuloso ..muy bonito tu trabajo ...tengo problemas siempre con los parlantes ..siempre se me rompen el pin de carga ja...una consulta ..como compras las placas fabricadas
Am enjoying the videos. Where did you learn acoustic formulas? Or do you just eyeball it? The cross interference in a non right triangle can muffle the sound due to samewave cancelation.
There is no formula......just creativity and good intention.....but no sound quality and definition...... Thats type of enclosure is maybe good for bass and low freq range but thats all.
He's not using any formulas nor is he really eyeballing anything seriously. He's just messing around with speaker concepts that look cool. He creates models of speakers, not actual speakers. This YT channel is solely for entertainment purposes. 😀
I see what you’re saying, surely if you can program a conc router a bit of sound calc would be worth it!! Another pointless video not really showing anything worthwhile
Это только декор хорош, если присмотреться, он её ни к чему не запитал, когда играла музня и он её крутил... Так что это фейк вуфер, что бы просмотры набрать...😭🤮
Which amplifire circuit board you use and which type of sub woofer you use can you please give imformation because i had made some of speackers but not satisfied ,please guide me
Yeah lol I noticed the resemblance to the D&B Audiotechnik B2 sub, which is a dual 18” design for arena and stadium shows. Miniaturizing the plans of a giant subwoofer to fit 4 inch drivers will cause a stupidly high tuning, unless you increase the port length dramatically. I knew this would be pretty awful sounding, but I wonder how it sounds with a good mic?
Hmm.. I'm not really familiar in electronics but why your speaker doesn't have transformers? Because everytime I open a speaker I always see a transformer inside even in a computer speaker? Can you tell me does building a bluetooth speaker doesn't require transformers anymore? Especially with that 2 big speakers?
He is using the speakers as full range, full audio spectrum. The coils of wire (and capacitors) you see in speakers are passive low or high pass filters so different speakers only play certain parts of audio like the bass or treble. Depending on needs and different speakers these are necessary or not.
Would be waaaay better if u use some of the space for an actual subwoofer chassis instead 2 normal speaker. This thing is gigantic and u only fit 2 small speakers inside. The whole bass reflex makes no sense in this setup. its a waste of potential.
Should have added grill cloth behind the decorative faceplate and made room for a component chamber instead of the extrusion on the back. Could have added better comments later. I can just imagine how much energy is lost because the air volume ratio isn’t right. Functional, yes 👍🏾 Practical, No 👎🏾 Worth updating, absolutely 👍🏾
son my interesantes tus diseños pero me parecen muy de tirar cuando se descomponen; ya que cambiar las bocinas cuandos se estropeen parece imposible de hacerse
My trading strategy
www.scalpxau.pro/
Хороший станок, хорошая работа с МДФ, абсолютный ноль в электроаккустике.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Полностью согласен
тоже думаю будет гасить стоячую волну по фазе то совпадает .,
Я один обратил внимание на длину ногтей, это же парень?)
Струячим почаны, держим кило.
I don't normally watch the ENTIRE video that people post of builds, but, this. Wow. Absolutely beautiful. I have no clue why there are ANY thumbs down. Bravo.
Maybe because MDF weighs a billion pounds...
And all of the enclosures are just a waste of wood
Because the democrats in America took away the thumbs down due to everyone thumbing down everything our president says. Lol let's go Brandon
maybe because his speaker concepts don't make any sense
Duuuude, you doing that reminds me of my high school days! Boys trying to out do one another and who had the baddest mini-trucks from '87 to '90 that had the better looks and sound. All came to nothing, wasted money. But you did it better than anyone else did! Yah sometimes we can be amazed what kids behind us can do. Great job kid!🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Uuu so I'm just up
Wasted money ! It was the experience and fun you had doing it at the time .now you carry that in your memory .
@@rzub im first like and will Thanks for the response😃.
@@stephensmith3708 👍
Late 70's, early 80's we just used House stereo speakers in the trunk to get the "desired effect". Yep, I'm Old!
Small idea to get someone to turn their music down, play Bagpipes through the stereo at max volume. They usually get the hint that you don't want to listen to what they are listening to.
lets Do It Yourself, let me get my CNC router first. Iam sureee I have one at my garage.
🤣🤣🤣🤣 that's to damn funny
Don’t expect to drive somewhere if you don’t have a car... damn people are ignorant.
All you really need is a circular saw, a brain, hand router and a drill.
Lol DIY so damn overused
Bingo
Loving the early christmas music in october truley spooky lol
Thank you
Так хорошо делал, чтоб в конце все запороть решеткой. Сетку туда надо!
Мало того, синтепон попадет внутрь динамиклв, нужно было динамики защитить хотя бы марлей. Да и жля хорошего звука нужно дополнять компонентами - СЧ и ВЧ. А от мидбассов звук как из ведра
I love speaker projects but I just don't like the Face cover, but that's me.
Good job on the build
Awesome work sir superb 👏👏👌👌👍💖😇🙏
Thank you
@@kingmakespeaker1402 welcome sir 🙏👍💖
Один я задумался 🤔 что направляя динамики друг на друга мы получим не очень хороший звук 🔊
меня больше смущает очень небольшое расстояние от обратной стороны динамиков до выходов портов фазоинверторов.. Сильно сомневаюсь, что тут хоть что-то просчитывали, похоже, что просто для ролика сваял, не более того.
Это НЧ, тут нет разницы как установленны динамики
@@БезКомпаса-щ8ю да, дико похоже что ничего не считалось. Возможно это уменьшаная копия концертного сабжа)
Awesome build!!! Those electronics need ventilation so they don’t overheat though.
This is so relaxing to watch , you did such a great job 👏
Thank you
my friend who has a woodworking shop and makes furniture for a living uses a slightly moist sponge to clean the excess glue before it dries and he has a perfect finish all the time.maybe you should try it!!!!!!!!!
Thank you
I guess you will never be replacing those woofers if they blow out 😅
Unique design, finest finishing each and every corners, Please make 8. 10 and 12 inch subwoofer box
its more better if you add 2 more smaller speakers for mid/hi range frequency ,very much better sound 😁
Nah this build is for bass not the higher frequency
Thank you
Wow,...rapi ,simpel dan bagus.....👍👍
Could you please reference the hyperlinks to the speakers and circuit board that you use in your speaker systems? The front face is beautiful; was it carved with your CNC system? Thanks for sharing this insightful video. Wishing you a great week. Cheers
P
@@tylerwinter9802 !?
Củ loa boombox 2 là loa mid bass làm sub thì âm trầm có sâu không?
*Essas máquinas automáticas de cortar madeira são muito fodas!!! Da de fazer TUDO com elas O.o*
Your videos are encouraging I want to start my RUclips channel next month.
Thank you
Another nice design. I've seen stadium speaker cabinets with designs similar to this, but with large drivers and huge cabinets.
Yeah this appears to be based on a D&B Audiotechnik design for a dual 18” subwoofer. The b2 and b22 subwoofers, depending on when they were made, are one of the leading subwoofers in use at arena and stadium concerts. (Slight changes were made between the two models.) I doubt it works very well when downsized like this, probably tuned really high. I have always wanted to experiment with downscaling one of these pro designs anyway and seeing what happens. Also, the middle part where the drivers go is slightly different on the original D&B b2 and b22 subs, with the drivers facing slightly away from the front.
Thank. I love you
Muito bom.🔊🔊🇧🇷🇧🇷
Nice non-angle cut on the bottom of the piece that holds the speaker or is there a reason for that..
Não pensou na manutenção como tirar o falante para possível troca tem que desmontar a caixa ou joga fora pois se desmontar a colagem já era
Amazing... I like your video? 👍👍
👍 Задумка отличная
👍 красавчик! 🤝
Muito show 👏👏👏👏
Só senti falta de uns leds👌🏼
Ещё бы светодиодную ленту ,чтоб мигала в такт музыке было бы ваще 🔥🔥🔥🔥👍👍👍
Thank you
New Subscriber. Keep the videos coming.
Double Bass Reflex is good design for these small speakers. it can get maximum low bass from speakers
Explain
It's a good idea, i think I can make it to recicle two speakers and one Bluetooth module for speakers 👍👌
@@Daviixy_Creations why is it a good idea?
@@elektrocat8681 cause i have some pieces of one speaker and some Bluetooth module, only need a battery to assemble.
@@Daviixy_Creations but why is a double bass reflex a good idea? Why not use a single bigger bass reflex?
Rất tốt, tôi đến từ VIỆT NAM
Fabuloso ..muy bonito tu trabajo ...tengo problemas siempre con los parlantes ..siempre se me rompen el pin de carga ja...una consulta ..como compras las placas fabricadas
Loa siêu trầm thì kím mạch cắt lấy âm trầm test nó mới hay,đúng chất nháy loa lớn với kick thước nhỏ chớ để lời nó mất hay
Awesome creation... Thank you for sharing ☝👍🙏
Am enjoying the videos. Where did you learn acoustic formulas? Or do you just eyeball it? The cross interference in a non right triangle can muffle the sound due to samewave cancelation.
There is no formula......just creativity and good intention.....but no sound quality and definition......
Thats type of enclosure is maybe good for bass and low freq range but thats all.
He's not using any formulas nor is he really eyeballing anything seriously. He's just messing around with speaker concepts that look cool. He creates models of speakers, not actual speakers. This YT channel is solely for entertainment purposes. 😀
I see what you’re saying, surely if you can program a conc router a bit of sound calc would be worth it!! Another pointless video not really showing anything worthwhile
Terbaik konten nya Mayu truss
Thank you
@@kingmakespeaker1402 iya
Mini dj dual bass speaker ka video banaye pliz me pake video ko like deta hu
Se fosse aqui no Brasil ele ia ter bastante encomendas trabalho perfeito ele tem viu
Nice job! 👏👏👏
Thank you
Mantap banget cara pembuatan salon aktif nya jos pokoe
Thank you
@@kingmakespeaker1402 sama sama mas bro
Kerenn smoga sukses bossku👍
Thank you
Sensacional, ótimo trabalho 🇧🇷
Those long nails can only be from a Japanese or a Chinese guy
This is speaker ASMR 😍
Amazing 👍👍 s3mangat terus berkarya dan salam sukes
Which type of bit is used to cut the wood ?
I want a bit which i can use with drill machine to cut the wood.
Gỗ này chế loa thì quá ok rồi
Amazing ❤
#TheProjectLab
Now Please add bass radiator now .😁
Thank you
Belo trabalho embora matou um pouco o som fechando a frente dando valor primeiro a estética
Omg It's so perfect 😭😭❤❤
Sensacional! 👍🇧🇷
Ok. Looks interesting. But any countings of parameters? Acoustic capacity? Efficiency? Acoustic channel length? Anything???
I made one of these a few years ago and blew the roof off of my house. I haven't replaced the roof yet.
Συγχαρητήρια. Μπράβο.
thank you very much
Excelente trabajo, ahora enseña como hiciste la tapa final o que cierra el bafle, de verdad muy creativo, felicidades
nice ganda angkapal boss wow
It’s a very nice design and craftsmanship. Are the speakers full range or is this a sub for a 2.1 system?
უმაგადესია 👍
I built using mdf for years then I tried quality plywood I will never use mdf again
Why?
Why for me as well
Nice little 6th order bandpass! What's the front and rear tuning of the enclosure?
That's not a Bandpass Sir
Отлично получилось.
Это только декор хорош, если присмотреться, он её ни к чему не запитал, когда играла музня и он её крутил... Так что это фейк вуфер, что бы просмотры набрать...😭🤮
@@SlavaRC плохо ты присмотрелся, слышно что звук меняется
Да. Пердяще и деревянненько. Для пацанчегов, любителей ганста-рэпа, на убогих битах, потянет.
Selamat berkariya semoga chanelnya selalu hadir di cintai penonton
Thank you
Everything nice, except the grill.
Thank you
@@kingmakespeaker1402
ruclips.net/channel/UCyVgBjUOy6ije0RzaqAvlHw
@@mr.ramkashyap7764 \aaä
Which amplifire circuit board you use and which type of sub woofer you use can you please give imformation because i had made some of speackers but not satisfied ,please guide me
These arent subwoofers.
Thank you
@@sethh8892 then which type of speakers is that ?
Sự sáng tạo tuyệt vời.
Những mẫu bạn làm có bán không bạn?
Legal bacana e bem elaborada
Thank you
雕花板里面挡住的板材要是喷上黑色，那样才能凸显出镂空雕花的美感
If you explained step by step and the components you use, you would have one more sub...
Tools u have wonderful an ur vision 👌
It's about wood working, but not about sound quality.
I think the woodworking is not even that good. He's just pretty creative and playing around a bit. :D
*Mua sub trầm mini này ở đâu vậy ad*
Anh có làm thùng loa theo yêu cầu ko ạ
Creator, can you tell me what is thr use of those cottons?
What this plums that you put in the speakers in 10:29
Cho minh hỏi ban dung mach loa gì đó
You do good work
Thank you
@@kingmakespeaker1402 yes sir nice work
You just want to demonstrate that you have a beautiful milling machine that can do that. Simply miniaturizing a large subwoofer will not work! ☝️😅
Yeah lol I noticed the resemblance to the D&B Audiotechnik B2 sub, which is a dual 18” design for arena and stadium shows. Miniaturizing the plans of a giant subwoofer to fit 4 inch drivers will cause a stupidly high tuning, unless you increase the port length dramatically. I knew this would be pretty awful sounding, but I wonder how it sounds with a good mic?
Excelente!!! Parabés!!!
Projeto e dimensões?
Quá khủng . Âm lực thật sự . Cái như vậy anh nhận bao nhiêu
Hmm.. I'm not really familiar in electronics but why your speaker doesn't have transformers? Because everytime I open a speaker I always see a transformer inside even in a computer speaker? Can you tell me does building a bluetooth speaker doesn't require transformers anymore? Especially with that 2 big speakers?
He is using the speakers as full range, full audio spectrum. The coils of wire (and capacitors) you see in speakers are passive low or high pass filters so different speakers only play certain parts of audio like the bass or treble. Depending on needs and different speakers these are necessary or not.
10:30 cotton?
Can you give me the buying link of these subwoofer ✌️
Thank you... i love youu
@@kingmakespeaker1402 bro link plz 🙂🙂🙃🙃
Would be waaaay better if u use some of the space for an actual subwoofer chassis instead 2 normal speaker. This thing is gigantic and u only fit 2 small speakers inside. The whole bass reflex makes no sense in this setup. its a waste of potential.
Hello you
Should have added grill cloth behind the decorative faceplate and made room for a component chamber instead of the extrusion on the back. Could have added better comments later. I can just imagine how much energy is lost because the air volume ratio isn’t right. Functional, yes 👍🏾 Practical, No 👎🏾 Worth updating, absolutely 👍🏾
Thank you
What a fun little 6th order bandpass. Were the chambers calculated?
It’s not a 6th order , more like a traditional slot vented with an angled baffle
Có nhận đóng thùng như vậy không bác
can you show the TS parameters and the box drawing? I want to calculate the design
He doesnt have any. This guy didnt use TS parameters to design the enclosure.
You will have to eyeball it. Consider the gaps in the housing as 1" and extrapolate from there.
Or products u used to built please provide where can we buy all those items u used to make / wood cutting mechine / speakers/ etc
son my interesantes tus diseños pero me parecen muy de tirar cuando se descomponen; ya que cambiar las bocinas cuandos se estropeen parece imposible de hacerse
Thank you
Speakers don't break
How many bikes passed through your garage
Assalamualaikum
Thank you
Can you tell me what's products are used for making this DIY
Nice work
Thank
Daerah mana om
Máy tiện Bao nhiêu v?
Phải chăng là sản phẩm của VN, sao ko sơn lê cho đẹp hơn bạn ơi?
Cek saund DJ yakuja om🗿
Mantap👍🏻👍🏻👍🏻👍🏻👍🏻